Liczymy pasujące modele…
There's something to be said for the excitement of topwater fishing....this my version of a 3D printed topwater minnow lure. Assembles just like my Crankbait Fishing Lure . I tested these out and they swim pretty well and have lots of…
A RepBox compatible or standalone rewinder system for Prusa MMU2 & REPLACE THE BUFFER BOX! ;) >> Non-Printable Hardware Kits Available Here >> Assembly Video Here UPDATED 2/5/22 RackStands for RepBox v2.3.1+ and RepRack are now AVAILABLE…
PPW Mk1 Self-Adjusting Gripper Plywood/Panel Carrier Clamp Effortless Panel Transport: Experience unmatched convenience with the PPW Mk1 Gripper Clamp, designed to streamline your workflow and make panel carrying a breeze. Its innovative…
19 Mar 25 - Added a new looped version that's much sturdier than previous models. Also changed the latch so the hinge was coaxial to the fillet. Overall, a more refined model than any of the previous iterations. 8 May 24 - Added beefy…
This is an adapter for mounting the Bosch L-Box on the Parkside Performance vacuum cleaner. 6 parts need to be printed. I printed the plug connections and mechanically stressed parts with 100% infill. If you have any questions or…
RackStand option for RepBox and RepRack systems. Also compatible with RepWinder and now allows you to use with v2.3.1 and up RepBox with slip-rod system. Open source 3D printable, laser cuttable, or cnc files and original Fusion 360 files…
Jerkbait Fishing Lure Description: Discover the innovative Jerkbait fishing lure, specially designed for discerning anglers like you. This lure allows you to adjust the casting weight and balance individually – easily through the Bambu…
This is a slim, simlpe Player Board for Oathsworn: Into the Deepwood. It keeps cards, cubes, tokens and animus in place. There are two versions: One with slots for tokens and one without. I prefer a clean design without token slots.…
6025 Fan Holder for Control Board I used Noctua NF-A6x25 5V PWM Bambu > Noctua Dark Gray>Black (GND) Black>Yellow (+5V) Light Gray>Green (RPM/Tach) White>Blue (PWM)
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Guybrush Ulysses Threepwood is the main character of the Monkey Island series of computer…
This is a remix of "Waveshare display (v1/v2) with a PiSugar 1200mAh battery and a carabiner loop" to support the PiSugar2 1200mAh (switched USB charging port/button, and added a slot for the power switch). I made the case and lid a…
This popper requires some weights. You can use split shots but I recommend using a ¼" slingshot ammo or a ¼" ball bearing. This is a very detailed topwater popper which should be printed mouth down with some custom supports for the most…
Standard pwnagotchi case Build your own pwnagotchi!!! instructions here: https://youtu.be/Gw4yCRKLn3Y Checkout case overview video here: https://youtu.be/KD7heRy_vDg Checkout the how Pwnagotchi build series playlist on my channel page:…
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! Sopwith Camel This is another plane for your collection : the famous WW1 brittish…
See https://www.amazon.com/gp/product/B08CHCG42N/ref=ppx_yo_dt_b_search_asin_image
My case for slim edition of Pwnagotchi.
Remix of Eduard3D's model. This version allows the cables to sit closer together. The hole diameter is the same, I just changed the spacing between them. This version is specifically made for the Corsair 12VHPWR cable, as it only features…
The cases in the original only had versions for the Pi Sugar v1. The V2 has both a switch and a button. I rejigged the case based on both this and the Pi Sugar cases (purely used to get the hole locations correct) and updated the buttons…
Required for assembly: 5 mm steel balls, you can also use lead split shot but I haven't tried it 0.8 mm (0.031 inches) Stainless Steel wire. If you have thicker wire let me know I can make more versions with bigger holes. 4 mm eyes Super…
Features: USB C charging port 2 buttons (need tolerance check when printing) side hook perfect fit for the display perfect fit for the battery + the magnet mount to the Pisugar 3 the lid is a tight fit but it has 2 holes for easy removal…
The Wind Cannon is an engineered 3D printable housing configured to hold 2 pulse width modulation (PWM) fans (120mm & 200mm fans). PWM fan output can be linked to PC simulation/game telemetry via an Arduino to create what is commonly…
This is my interpretation of a gauge 1 (1:32) Deutsche Bundesbahn PWGHS 54 Güterzugbegleitwagen. Best printed in PETG, with the outside of the walls facing up. 20SEP19: Uploaded improved STL's. Construction: Identical to my previous…
I designed this case for the Geekworm X306 UPS shield. It provides constant power via a 18650 Li-Ion battery. You can plug and unplug the USB-C port on the back to charge the battery as needed, without interrupting the operation of the…
I printed with the open side up. This is a simplified version based on the REV part .
I was looking for a way to hang my snap ware lids, I came across the universal hanger for Ikea and similar sized lids however snap ware has a longer arm. after just a. few minutes in tinkercad I was able to make the adjustment necessary…
(⌐■_■) if you have the combination of an pwnagotchi based on the raspberry pi zero with the waveshare display, have an RTC installed and the UPS-Lite you want this case! i included STP and STL-Files let me know what you think!…
Connectors with LEGO-compatible studs for mounting small (SG90) servo motors - plus a LEGO compatible ‘tile’ connector for a PCA9685 PWM controller. The connectors can be used: either to build simple test beds for developing control code…
Für meinen Werkstattsauger Parkside PPWD 30 B2 (auch für PPWD 30 A1) habe ich einen OSVac Adapter F32 für den originalen Anschlussstutzen erstellt. Gedruckt mit Sovol SV06 (Düse: 0,6mm / Layerhöhe: 0,2)…
Fan duct to redirect the hot air from inside the case to the outside and prevent a hot pocket between the fans and the top of the case. Based on the FormD T1 1.1 - 120mm Noctua NF-F12 PWM Fan Duct but completly rebuild and adjusted for…
I needed a key for a Toyota roof cross bar lock, so I made one. The keycode is 82, as shown in the photo (the number on the lock). This key is for Toyota part number PW301-02009. Category: Automotive
Massive octopus crushing a broken wooden boat, wrapped in dynamic tentacles with rich texture and dramatic composition.
Huge thank you to Printables user soozafone for creating my new obsession, Lucky 13 . You will need to download the Lucky 13 armature and skin found here https://www.printables.com/model/148367-lucky-13-printable-jointed-figure Although I…
I designed my Pwnagotchi case around my build: Raspberry Pi 0 W Waveshare v2 with "slim-agotchi" low profile mod PiSugar power pack with 1200mAh battery It's a snug fit that exposes the USB ports while the cover is dovetailed and slides…
ESP32 WiFi Fan Controller - Free Case for Makers The board is the product. This case is a thank you to the 3D printing community - print it yourself instead of buying the Nylon-SLS version. 🛒 Get the board: Elecrow:…
A piece of blocking shipwreck terrain. https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on MyMiniFactory, a tribe. I make miniature wargaming and…
Here is my Willys MB or Ford GPW 1:18 scale model. The Jeep was produced in 1941 by Willys-Overland for the War Department however by the end of 1941 it was apparent that Willys could not meet demand and Ford began making the GPW. I think…
This housing is made for a PWM controller 12V 2.0A (max), sold here: www.banggood.com/Low-Voltage-DC-1_8V-3V-5V-6V-12V-2A-Motor-Speed-Controller-PWM-1803B-p-961010.html Attachment using 2 screws or double sided tape. Assembly…
I created this case to encorporate the Waveshare V4 Epaper display, together with the UPS Lite V1.2/V1.3 and the Pi Zero or Zero 2w. The Dimensions of the case is WxDxH 75x25x36mm. It is smaller in all dimensions than a flipper zero with…
A compact desk fan using a Noctua 140 mm PWM fan, with the PWM speed controller integrated directly into the base. The design keeps the fan setup clean and cable clutter to a minimum while allowing convenient speed adjustment directly at…
sparepart spacer if you lost your Shimano crank spacers. nothing special
DB Pwg14 Güterzugbegleitwagen in Spoor 1/Spur 1/Gauge 1/ 1:32 Work in progress ! All files are uploaded. An instruction manual and a B.O.M. will be provided soon.
I finally decided to publish some of the lures I designed and rapid prototyped a few years back. This topwater stickbait / pencilbait has a length of 7cm / 3'' and weights approx. 7g / 1/4oz without hooks. I already caught many perch and…
REFILL cívka pro náhradní plnění PWS filamentů. Reusable REFILL spool for PWS filaments.
To have a good alignment the magnets need to be removed from the battery and the pisugar2. I added a version without pisugar and battery.
simple Fan Shroud for the NF-A20 with 170x170mm and 154x154mm hole spacing
Remixed the O11 fan duct to fit in the FormD T1 together with my beloved Noctua NF-F12 PWM fans. It's a snug fit so that all of the air pressure is working to get the hot air out of the case instead of just circulating between the case…
A mechanical stopwatch is a timer that counts time from 0 to 999. When the time reaches 999, it starts counting from zero and does not need to be rewound. The whole mechanism is powered by an 8g servo. The switch is already built into the…
Original: https://www.thingiverse.com/thing:3920904 Added slots for straps to carry it with a power bank attached and I also made the walls a bit thicker.
very simple case for the HW-070 PWM module. pretty much it.
Additional parts needed: Rasberry Pi 4b 40 mm PWM 4V Fan (such as Noctua NF-A4x10 5V PWM) 4x M4 countersunk screw (Normally supplied with the fan) Optional: 4x M3 nut and 4x M3x6 screw (To screw Raspberry pi securely into the case) Print…
Remix to use the waveshare 2.13inch E-Ink display HAT. Print in place, not supports are needed.
Alternative Top Case for "Pwnagotchi case for Waveshare and Pi Sugar v2" You can find the Case and Buttons here: https://www.thingiverse.com/thing:4551538
Additional cooling for DEYE 20kW LP . I had to divide the model into several parts due to its size. It is a prototype without speed control for now, then a PWM controller from Aliexpress will be installed later (search for " EGBO DC12V 3A…
No support / FDM friendly If you have springing reduce the temperature of the nozzle to the maximum (205°c for prusament PLA ) (approx. 28 mm scale)
This a remix of PantsManUK's remix. The original carabiner loop was a bit choppy when trying to send off to 3D Printing Services like PCBWay, so I fixed that. Also, the NEW_LID file is actually done by formlessform @formlessform_1988521…
If you use a UPS-Lite and a Waveshare 2.13" e-Paper pHAT with your Pwnagotchi this is the case for you
Ideally printed in PLA and moulded to the casing (heating the part with a blow dryer before). Mirror part to suitable for both sides of the headset.
Be careful, this case has tight tolerances! (Remove the SD card before putting your pwnagotchi in!) You will have to slightly flex the side where the micro usb ports are to make your pwnagotchi fit. If you have any issues or need help…
Here is a Pwnagotchi case i made. It's to hold a waveshare V3 + PiSugar 2 + raspberry zero 1.
F32 Adapter for the included braided hose of the Parkside Performance extractor
Here you can download an adapter for the Parkside PWD 30 A1 vacuum cleaner for the osVAC(neo) system. It is based on the model from @d0b_58654 and should therefore also fit the Parkside PWD 30 B1 (and maybe others). However, since it is…
This was modeled entirely within Blender. As such, there isn't much of a sense of scale to go along with it. Scale it how you like in your slicer. It prints without supports perfectly! Make sure you print a second, can't watch flank…
smol case for the readily available pwm controller modules… (first make in the uploaded picture used old tolerances; cover should sit flush now) I recommend using a few drops of superglue to keep the cover on. for one of these…
I recently helped to build a PC. Friends graphics card of choice was affordable Zotac's GTX 1060 3GB single fan model. Due to construction/budgetary limits of graphics card it was loud while in high performance mode. We decided to add…
Sopwith Triplane fighter aircraft from World War I. Designed in Blender for use as a miniature for the BlueMax boardgame Printed on Anycubic Photon S. Licensed under CC-BY-SA-NC-ND. Print Settings Printer Brand: Anycubic Printer: Photon…
I found De3DPrintman's Stroopwafel design and created a coaster design out of it. I removed the slight overhangs, centered the pattern and scaled the coaster to a 100 mm diameter. Depending on the filament it looks quite realistic from…
Not all brands are made the same, and I designed this to fit a Be quiet cable. I took that version and scaled it up to 108% to fit the stock cable that comes with ASUS Loki PSU's . If you find that none of the versions I made, fit your…
A super handy pwnagotchi - for your journeys in the city :D
Pwnagotchi is an A2C-based “AI” powered by bettercap and running on a Raspberry Pi Zero W that learns from its surrounding WiFi environment site of full project: https://pwnagotchi.ai this is a pwnagotchi case with protective cover for…
Check out my newest Pwnagotchi case here This is a remix of the case for the pwnagotchi by soul_Stz. I adjusted the side of the case so that the WaveShare v4 can be inserted correctly with a Raspberry Pi Zero 2. I had the problem that the…
Wer, so wie ich, den Schlauch nicht von dem originalen Adapter lösen kann (ohne den Adapter kaputt zu machen), kann die beiden nutzen, um den Sauger mit einem osvac F32 Anschluss zu versorgen und den Schlauch ebenfalls. Ich habe die Teile…
A sturdy holder for the Parkside Mini Grinder PWSA 12 B1 for the IKEA Skadis Pegboard. 4 universal hooks by CSD_Salzburg are used to mount. Easy print in PLA or PETG (hooks should be at least PETG). I printed with 0.24 resolution and 15 %…
This design is a case for a Pwnagotchi build using: Raspberry Pi Zero 2WH Waveshare UPC HAT (C) Waveshare V4 2.13" E-ink Display HAT a MOLLE Strap like this one 8x 2.5x3.5mm screws It is designed to fit a non-slim variant of Pwnagotchi…
Mit dem Adapter kann man den Schlauch des Dewalt DXVCS002 Vorabscheiders direkt in den Parkside PPWD 30 B2 stecken. Der Schlauch des Parkside PPWD 30 B2 Staubsaugers kann direkt ohne Adapter auf den Eingang des Dewalt Vorabscheiders…
Oathsworn: Into the Deepwood has a very nice tokentray, but a lot of space is wasted beneath. I created a dice storage tray that can hold all the dice used in the game plus an additional set of battle dice and fits below the space of the…
Was trying to find a cable comb for the 12VHPWR cable on my Seasonic power supply but didn't find anything. So, I made my own. This is sized for the default PSU cables. This is best suited for graphics cards that have the sideband pins on…
Simple model of armored car OA model 30 / Pz. Spw.30 (t) in 1/35 scale. Possibility to print a whole or a few parts separately. Information https://en.wikipedia.org/wiki/OA_vz._30 The photo shows a prototype copy of the Prusa Mk3,…
SUPPORTS NEEDED LOW LAYER HEIGHT RECOMMENDED 100% INFILL RECOMMENDED MATERIALS NEEDED: 3D printed parts 18 Gauge Stainless-steel Wire Steel BBs Split Ring Kit Treble Hooks Snacks (Preferred, not needed) Super Glue Clear Finish HOW TO…
One of the best pwnagotchi case - edited to be openable in any program as I had similar problem mentioned in comments of original file. All credits to the original creator ! Thicc Dual Loop version (without letters) print as it is - in…
Drukowane z podporą normalną, przy mocowaniu możliwe delikatne podszlifowanie
Bench rollers are invaluable tools for solid or hollow flameworking -- for quickly checking and centering your handles and work in progress. But as a newbie, I got frustrated at the $250+ price tag, so I designed these and immediately…
2021-01-02: Added V2 with a larger ring for the cable – I was afraid the cable could get damaged by bending. Cable clip for HP Reverb G2, directing the cable upwards – useful for pulley systems TO BE USED TOGETHER WITH THE ORIGINAL SIDE…
A foldable case for pwntagotchi that uses just the screws from the hat. Printed in PETG 2. mm layers standart settings. Show off your printbed design on allmost all sides! There ale more variants of the bottom part, you can use 4…
This is a little case for an USB fan speed controller. I though the bare circuit board is not so nice to look at. When you search on Amazon, Aliexpress ect. for USB fan speed controller you will find a lot of suppliers for that. I guess…
I designed a Cup Holder to fit bigger Bottles and Shakers into the Middle Console of our Dacia Sandero. It fits perfectly into the existing Cup Holder in the middle Console. No Glue, Tape ect needed. I designed it so you can add a Rim on…
The Wind Cannon 2 is an engineered 3D printable fan system configured to hold two (2) pulse width modulation (PWM) fans (120mm) in an inline configuration. PWM fan output can be linked to PC simulation/game telemetry via an Arduino +…
This speed controller box is specifically for the speed controller sold at Monster Guts (https://monsterguts.com/products/pwm-dc-motor-speed-controller). Cut outs for dial, wires and zip tie at the bottom to mount. 1 complete file.
Pwnagotchi case with antenna slot and ring for a carabiner / snap hook Pwnagotchi project: https://pwnagotchi.ai/ Used parts besides the basic pwnagotchi setup: U.FL RF Port SMD (to connect an antenna to the pi zero) wifi Antenna SMA
A rugged housing, meant for the outdoors, allowing you to take Meshtastic with you wherever you roam. The case accommodates up to a 3000 mah battery and the larger N-Type antenna base for longer range. An adapter is provided for the…
This is a case for a Pwnagotchi that uses a Raspberry Pi Zero, PiSugar S battery, and Waveshare V4 E-Ink screen. Note: Once you put the SD Card in it is very hard to remove.
EGBO DC12V 3A 4 wire PWM fan speed temperature control https://de.aliexpress.com/item/1005006994739710.html CAD Model…
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
Sopwith Camel capable of being piloted by a Lego Minifig. Triplane can be found here: https://www.printables.com/model/367590-easy-print-tri-plane-for-minifig-lego-pilots Parts are oriented correctly for printing on a textured bed.…
Using Ya Ikou's Pwn-In-Place case as inspiration, I designed a new variant from scratch. Built Specifically for this setup: Raspberry Pi Zero 2WH PiSugar3 2.13" E-Ink Display HAT V4 My perceived improvements over the original: Made loop…
Tested with a Pi Zero 2WH And Waveshare 2.13 inch V4 eink screen (supports Pi Zero WH, Waveshare v3 as well) Check out my Pwnagotchi guide and plugins too How to Use: First, remove the microSD card from the Pi Zero, then attach the pi…
Our friends from the 3D Printing community from all over the world seem to like our famous Dutch Stroopwafels so much I had to create one for them. Now you can have a Stroopwafel when and wherever you like. ;-) You can also use it as a…
I could not find Stream Deck XL stand that would fit my needs. This is very, very simple solution for me to align it with my keyboard at desired angle. It is 10° angle towards me to get a less glare and have better visibility to my…
Inspired by the delicous stroopwafels from the netherlands I had to make a one euro sized version that can be used as a shopping cart token. Happy printing and enjoy.
To print this I used eSun PLA+ on my Ender 3 Pro. These are the settings I used: 0.2mm resolution 20% infill Normal supports everywhere I recommend printing the body of the case with the USB-A hole facing up. The top cover takes a bit of…
This remix is based on the fantastic Pwnagotchi case for Waveshare and Pi Sugar v2 by MrDrem This case is designed to work with: Raspberry Pi Zero 1/2 Waveshare V2/3/4 Pisugar3 I hope this variation is helpful to others in the community!…
