154 modeli
I used PLA+, part cooling fan at 50%, 10 walls, 15% infill. Walls are more important than infill. For heavy use, print in Overture Easy Nylon or PolyMaker CoPA at 100% infill, then anneal and moisture condition. STEP File:…
Airsoft QLS plates compatible with Safariland or Cytac/Amomax via adapter The male and female plates were remixed from (https://www.thingiverse.com/thing:3827837). Print settings: 25% infill 6 walls @ 0.4 or 4 walls @ 0.6 PLA or PETG 0.2…
Updated 9/10/2024 to require much less support material Included .step file and Bambu print profile Accepts the QLS Fork and is meant to be screwed to something like a desk or nightstand with wood screws. PLA is fine for this application.…
Using this mount on my ERGON mtb saddle, also changed the mounting for SQLabs. Top and bottom pieces are now in one .3mf file. So download the one the suits you saddle. (I tested these on MTB saddles, so your mileage may vary.
These are remix QLS plates from voxpatriam. Added 360 degrees "adapter" for e.g Amomax and Cytac holster. Printed mine in PLA+ ~50% infill for testing durability and prototyping, but your settings are your choice. OG:…
Baskets are one-piece easy-to-print and lightweight to save print material. They are held in position by the rubber bumps under the printers. A slot in the front makes it easy to pick out printed labels. Holes in the base plate are round…
I needed a clever way to organize my Holsters. All of them mount to my rig via the trusty Safariland QLS Plate+Fork System , which does a really good job of locking your gear in place. I had some spare QLS Plates around that i could have…
These clips are ment for the Ortlieb panniers with the QL1 / QL2 klick system. https://www.ortlieb.com/de_en/ql1-ql2-hook-inserts The originale ones come in the sizes 8mm and 11mm to fit the Bike rack. These here are designed for Bike…
Copy of my retro Display Stands listing as for some weird reason that one isn't showing up. Covers: ZX81 ZX Spectrum 16/48k Rubber Key ZX Spectrum + 48/128k toastrack ZX Spectrum +2/+2AB ZX Spectrum +3 with and without Gotek (extra 5mm on…
🇺🇸 Welcome to Cincinnati, Ohio! ⚽ 🏟 TQL Stadium is a soccer-specific stadium in Cincinnati, Ohio, United States. It serves primarily as the home stadium of FC Cincinnati of Major League Soccer since May 2021. The stadium cost about $250…
This is an ear saver for masks. This print can be printed upright so you can print more at a time. In fact on an i3mk3 you can print 45 in one go :) Print instructions The 3mf files have setting to run the first 2 layers slower to help…
When I ordered my 6354RDS - ALS Holster for my P320 I didn't know the QLS 22 reciever plates were "made to order" So I recieved the holster first. Since this is my first Safariland holster purchase. It was kinda useless untill the…
A removable basket to catch the labels from your Brother QL-700 to stop them from landing behind your desk! This is a three-piece design that uses the printer's own weight to hold the basket in place meaning that the basket can hang over…
A low profile PCIe bracket for the Dell/QLogic 57810S dual port 10Gbps Network card. The bracket is 1.6mm thick. Printing Print with screw holes for PCB flat on the build plate. Material: PLA or PETG Print Settings (PrusaSlicer): 0.20mm…
This is a clip to replace the Shure 95A29359 when you loose it. It is not a 1:1 copy, it is wider to be more obvious and fit the foam tape you can buy in the store. This does not fit the stow compartment and depending on what method and…
The standard hooks only work for very small bike racks with thin tubes. a lot of ebikes have thicker ones. Aparrently you cannot buy them in other sizes. So I made a model. The small one can also be used to replace the original, even if…
I had a Blackhawk Omnivore holster (that I'm assuming uses a standard Blackhawk mounting pattern, so this should work for other Blackhawk holsters as well) and I wanted to mount it to my Safariland belt rig. Made this adapter in Fusion…
Hardware To attach the Amomax hoster to this I would recommend an M6x14mm countersunk bolt. Versions There are two versions, standard and non-standard. Standard Standard uses the normal mounting solution with that bit at the top that…
Design based from the original parts. works with standard resin. It might be printed with an 0.2 or 0.1 nozzle for FDM printer as well. After 6 months of daily use one part broke. I made a V2 of the hook a bit thicker at the base and add…
This was printed on Bambu Labs x1 Carbon. I printed with Inland ABS. 3mf file is already properly orientated. Layer Height: 0.2 Nozzle: 0.4 Infill: 40% Support: Normal(auto), Style: Default Threshold angle: 30
Another simple spool holder to go on a Prusa i3MK3 bar. It can be one sided or two :)
Nothing fancy, just a simple case to protect the remote from the occasional fall. I made two versions, a thin one that can be used with hard plastics like PLA, ABS, PC or Nylon and a beefier one to be used with TPU (works with hard…
Update 02032024 - Updated models with correct hole sizes for heat set inserts. Spacer/Adaptor that allows you to run your factory Canik Rival holster on your Safariland QLS. I made it as a temporary until i could make up my mind on a new…
The release of the first few MMS Safariland QLS adapters! - Clean QLS Base Mount (No Holes, No Rail) - Short Male QLS Base Mount - Short Female QLS Base Mount - Long Male QLS Base Mount - Long Female QLS Base Mount - QLS Base Mount With…
A 1/100 model of the PSLV rocket. The Polar Satellite Launch Vehicle (PSLV) is a medium-lift launch vehicle for the Indian Space Research Organisation (ISRO). The version modeled here is the -QL which features 4 SRBs and was first flown…
A PS5 controller holder, which uses the tablemount positioning pins on the TV to fix the holder in place. You can only use this when the TV is NOT using the table stand, since it uses the 2 holes and steering pins when mounted to the TV.…
I found it on Grabcad and adapted it for the usage with Skadis Pegboard. The universal Hook is used (2 of them) and a distance hook on the bottom. 4xM3 Screws, a bin below the printer and you're happy to print multiple labels.
Experimented with a few different radiuses, finally tried one that is slightly tapered, fits perfect. Category: Camera
This organizer can hold a label roll for the Brother QL800. Two version are available for the 29mm and 62mm label rolls.
Ein Hinweis zur Passgenauigkeit: Das Design wurde mit minimalem Spiel konstruiert, um ein Klappern der Tasche zu verhindern. Da ich das Modell nur mit meiner eigenen Tasche testen konnte, kann ich nicht zu 100% garantieren, dass es bei…
The Brother QL-820NWBc label printer does not come with a bin to catch the labels that are printed. Therefore, these just fall to the ground. To solve this issue: a bin to catch the labels. This bin interfaces with the holes on the bottom…
This is a dust collector with a pass thru for a standard MQL system. 2023-10-17 Now the fusion file is there You will require: 3x 10mm M3 screw ( Amazon / Aliexpress ) 3x M3 heat set insert (4.6mm OD) ( Amazon / Aliexpress ) 12x 8mm…
Thanks to @Lannix3D for the original! I printed with no supports, removed the skirt loop and added some brim so I could print in one session aka all fit on the builtplate. I would recommend printing only the outer brim on the basket.
QLS plate for mounting anywhere. 3 Screw holes are provided. Remixed for even less supports and material! Printed flat on bed w organic tree supports Made and tested with PLA - .3/.6 - 2 Walls -4 Top/Bottom -
I couldn't find a printable file for this piece, so I decided to model one by myself. I printed mine with diagonaly to make it stronger and it with 5 walls and 50% infill.
i've tested the original thing on my bicycle and it was not working due to wide swingarm this bicycle has. it's used on a M frame that may have a different chainstay lenght. So if you find it to be not compatible with your bicycle please…
Waveshare 7inch QLED HDMI display case You will need: 6x M3x3.9x4 inserts (Ruthex M3S) 6x M3x12 tapered screws 4x M4x5.5x4 inesrts (Ruthex M4S). For better VESA mount strength, mount M4 inserts from the inside, so they are not easy to…
Motivation I wasn't entirely satisfied with the fit of this one by crashoverride after being printed in Grey Pro & I think Durable resin on a Form 3 – it would fall out maybe 1 of 30 rides OEM parts cost money Rev 1 was a modification of…
Printed with Form 2 and grey resin.
Print instructions: Layer height: 0.1 mm Speed: 30 - 50 mm/s Supports: on Material: Preferably black PETG/ABS/ASA, otherwise paint the inside black There are printed threads, ensure your printer and filament are well calibrated.
I lost a few spacers because my bike rack has a little nose which pushes the spacers through the mounting on the panniers when it gets bumpy. My solution is a small collar, which prevents the slipping of the spacer. Works very well and is…
A small but handy part that can be mounted to Ikead Skadis pegboards allowing you to attach Safariland QLS gear to it. Based on my previous design . I want to thank user Clay2F for creating a Skadis reference file . Recommended Print…
These are Ortlieb QL2.1 spacers / inserts to fit the side rails on a Specialized Pizza rack, about 13mm diameter. Solidworks 2020.prt file included for your remixing fun. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No…
8mm replacement spacer for Ortlieb QL2.1 hooks. Print Settings Printer: Anet A6 Rafts: No Supports: Yes Resolution: 0.1mm Infill: 20% Filament: ESun PLA+ Grey Notes: Use 4-5 perimeters/walls for strength. How I Designed This I love my…
I printed this at 0.1mm layer height since the filter threads are a 0.75mm pitch, best use as low as you can get and print at a slower speed. The fit is a bit loose until it's tightened down, but it's not going anywhere once in place. You…
Printed in PLA, but i think PETG would be a better filament, since it will warp because it's thin.
I recommend printing the “no support” version. These are two inserts that need to be cut apart at the notches after printing. Remember to turn your part cooling fan on during bridging. The print needed some cleaning afterwards to fit…
This is a stand for a Brother QL-1110 label printer with magnetic attachable tub. You need 4 8x3mm magnets for the holes at the front. You can glue small TPU pads at the bottom for a better stand. Update V2 08.2024: added a longer version…
I liked the idea of the original design to store the label rolls neatly. However, I thought it was using to much filament for a simple storage solution so I created a new version which can be printed faster and consumes less material.…
Update as of April 27 2023: Updated, reinforced version available. This is an adapter to mount old Ortlieb backroller-bags with the QL 2 system (not 2.1!!) to a Cube Kathmandu EXC 750 2022 with an Acid Integrated Carrier 3.0. For QL2.1,…
New case to accommodate the vDrive Microdrive replacement. Wanted something that matched the Spectrum+ model better and also the QL. Includes some glue on logos to finish it off. Also added an extra washer as my vDrive came with a…
Listed in the Files tab are .stl files for the QLS-compatible TKOc Hermes holster. These files are tested and are functionally the same as real QLS parts, meaning you can use real QLS parts to attach the Hermes as well. I used Overture…
This buck will allow you to make a holster that fits the safariland qls system. No drilling holes were included, since doing so could leave less room for error. 3mm Tall I suggest printing in PLA+ or ABS, 3 walls should be sturdy enough.
Rebuild the model to correct all the mistakes in the original one.
Safariland QLS compatible Fork / prints without support
Very simple BB shot bearing 280x280mm scanning turntable with larger base than previous versions Video assembly guide from https://www.thingiverse.com/thing:1953369 Print Settings Printer: Creasee CS30 Rafts: No Supports: No Resolution:…
This is an improved lock design from the original design -less material & faster to print -lower profile, less obvious -easier to attach and remove -should be more secure over rough trails / roads -more resistant to accidental removal…
this GitHub repo has a model of the nut but I was unsatisfied with it replacement for Ortlieb part number E205 the original one broke for me after my pannier fell off my bike the original features 2 spots to put 4 mm hex key to prevent…
I printed these out of ASA for durability and then cut a piece of 1/8” frost king pipe insulation for the pad. https://www.frostking.com/products/pipe-duct-insulation/rubber-insulation-tape Print settings with my 0.4mm HF nozzle were…
Minimalist case that fits the qrp-labs QLG2 GPS board with top-mounted antenna. View port for 3 status LEDs. +5 V and TXD cables are held with a pinch that can be tightened using a zip tie. I printed it with PLA, 0.2 layer height. 30%…
Adapteur Flexible Aspirateur standard pour l'installer sur un aspirateur a cendres de marque Qlima
A spare holder for Ortlieb bike rack with QL3.1 fittings. Designed for 12mm flat M4 countersunk hex bolt. I printed it with solid perimeters, i.e. no infill, just perimeters all the way. No supports needed.
Problem AFAIK, the SQlab innerbarends 1.0 410/402 innerbarends must be mounted with companion grips. Source here, from the product page. The Innerbarends® 410/402 are specifically designed to complement the SQlab grip models 710 and 702.…
Case for the OqtaDrive Standalone PCB which you can find on PCBWay Sinclair ZX Spectrum & QL OqtaDrive Standalone v1.1 PCB - Share Project - PCBWay Also added a 2nd case bottom with a single LED hole for the v1.2b PCB. *Added a v1.2 of…
I wanted to attach a set of 16L panniers that used the Ortlieb QL3.1 Mounting System to the Specialized Pizza Rack on my bike. I was able to attach QL3.1 system, but the lower mount of of the QL3.1 system the bag too close to the disk…
Ortlieb offers only the complete QuickLock QL3.1 bicycle mount as a spare part. After an accident I had broken only one pin, so I designed a spare just for that. Print in ASA or ABS for stability reasons.
Design/Spec request by my son that wanted to mount a QLS device (holster) to his wheelchair using the 1 inch ram mounting system. Very sturdy when printed in a carbon fiber or nylon filament, PETG works pretty well. Suggest printing very…
This is a replacement for the bottom pin in Ortlieb QL3.1 pannier mount. To use this pin, one must replace the original socket head cap bolt (M5x30) with a countersunk bolt (also M5x30). This allows for a thicker material around the head…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a case for the 7 inch Waveshare 7HP-CAPQLED display , a budget quantum dot touch screen. There is an optional back panel that supports VESA 50/75/100. You can find a colour 3D preview of the model with optional AR…
We have the common Ortlieb bike bags with the simplest Quicklock-System (aka QL 1). This Quicklock system is quite comfortable as one can easily attach or detach it from a bike. However, that is also the biggest security issue. Without…
This adapter lets you mount a Safariland QLS Receiver Plate to the Coolermaster Qube so you can attach a Holster with QLS Fork. i used this model in the rendered assembly for demonstration purposes If you need anything, feel free to reach…
The Virtjoule Heat Insert Tips B08B17VQLD come in a 3d Printed case without a lid. So, I just designed a very simple cover for the case to slide into. The bottom was made a little shorter so you can grab & pull the case out. Virtjoule…
Due to a project in my workshop, I had to reduce the width of the drawers from 75mm to 51.5mm because the space left under the countertop, after installing all the drawers, would not accommodate the standard width.
I uploaded a much improved lock design, located here: https://www.prusaprinters.org/prints/70786-ortlieb-ql31-lock-improved-design I have a set of Ortlieb bags for my commuter bicycle that use the QL3.1 mounting system. These work great,…
no holder was supplied , so just quick printed one (Maybe scaled to 101% if its to tight)
Instruction 4 walls minimum 100% infill recommanded, the thickness of the flexible part is 0.8mm Any material should work, PETG works great Description Max cable width: 5mm Ortleib original article: ART. NR. E125 Function as a guide for…
Belt caddie to hold 2x5 Sillly Shells for faster reloading. Originally made for use with Breacher (also by Sillybutts). Caddie frame designed to attach to a Safariland QLS 19 Locking Fork.
adds Dividers to the medium-sized bins
Simple keyboard cap/cover for the Sinclair QL to keep the dust out of the keys. The cover fits snug on top of the keys only and not the whole machine as that is way too large for any normal or even large FDM printer, so I think this is a…
A simple diy solution for MQL(Minimum Quantity Lubrication) part cooling for CNC machines. For external hardware you will need: Pressre reducer 4mm PTFE Connectors 4mm PTFE Tube 2mm brass pipe 4mm brass pipe Teflon Tape Corona Test Bottle…
Just include lemon juice Copper pennies Zinc coated machine screws 1/4"-20 1 in long should work Some alligator clips to connect it all A small LED You should be able to get a 4 V battery and that can light up a small LED :)
adds Dividers to the medium-sized bins
Requires trimming screen mounting points to fit the screen
I couldn't find a 12mm version of the QL2.1 spacer, so I made one from this version that had a collar. I didn't need the anti-slip feature, so I removed it. Thank you boinappi for making a 12mm spacer!
I needed space on my desk. So I made a holder for my Brother QL810W label printer. First, I made one with screw holes for metric M3.5 - M4.5 screws. From that, I then made the holder for the Ikea Skadis multi-wall system, and added the…
Very simple BB shot bearing 165x165mm scanning turntable Video assembly guide from https://www.thingiverse.com/thing:1953369 2021-09-02 Updated base, model was half height due to CAD error. Will work as it was, but needed a smaller bolt…
Designed this box for the Pump controller from END-CNC´s MQL System. Slide the Cables through the glands (M20 for I/O from machine controller / M12 for two solenoids and the stepper) and wire it to the Board. The two boards just slide in,…
OqtaDrive uPCB v1.2 Case. Case secured with 4x No.4 (2.9mm) x 1/2 inch (13mm) Phillips Self Tapping Pan Head Screws Recommend to print with no infill to ensure the screw supports have enough strength PCB can be found on GitHub (…
Die originale QL3.1 Halterung gibt es nur als gesamtes Ersatzteil bei Ortlieb. Da mir nach der Demontage die Abstandshalter verloren gegangen sind, musste ich 2 neue Modelle drucken.
Qlima dehumidifier models D820 and D825 house a Hepa filter and will clean your air and remove moisture. Unfortunately these filters cost around 40 euro's and have to be replaced within months if the dehumidifier is used in a dusty…
This model is a dedicated Nicolai Eboxx Slapper, it's ment to be printed in TPU and then thermoformed on to the chainstay using heat. It's designed around the QLF chainstay but should be compatible also with KLF models produced later. The…
if you are planning to wallmount the qlocktwo safely you will recognize that the wallmount that comes delivered with the qlocktwo classic seems to be very loose. If you want to mount it in public places just a little push from the bottom…
I had some issues with taller prints using my old spool holder so I made this extended one. I used the hex pegs to align and give strength then glued it all together with 3D Gloop
Attach the Ortlieb QL 3.1 mounting kit to your EX-Rail equiped Tout Terrain bicycle, and take advantage of Ortlieb's low profile, easy-to-use mounting system. You will need 8 M5x30mm bolts (4 for each side) and do not forget to apply…
Replacement part for the Safariland QLS paddle holster. Keeps the holster from being pulled up and off your belt.
A little support bracket for the Sinclair QL MicroPico Drive SD card Microdrive emulator. It has been separated into separate parts so that it will fit the size to be posted as a LArge Letter in the UK. The details for the MicroPicoDrive…
I thought it would be cool and neat idea to find and mix a bunch of models into one (since making models from scratch isn't really my specialty) to make a quad lock for the vent, especially since I personally wanted to mount my SCT X4…
Basically a stand to fit in the QL to stop the OqtaDrive PCB sagging and possibly shorting on the motherboard. Also a small cap to go over the pin header to help route. PCB can be found here: OqtaDrive QL v1.1 - Share Project - PCBWay…
