3707 modeli
I don't have the space to stand the PS5 vertically, and I wasn't happy with the console's shakiness without some stabilizing shims. I couldn't find anything for the PS5 Digital Edition, so I made this remix. The two stands are radially…
Wydruk około 1,77 €–2,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this model based on my fiancee's ACNH house. I scaled it to fill a i3, but printed it myself at 50% scale. The only issue with that size was the door nob breaking off. Broken into different parts so they can be printed in different…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu
This model is ideologically based on the line Crochet tension ring Crochet Ring Crochet Ring (parameterized) New ideas have been incorporated into the model and the result feels significantly different. Printing recommendations:…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
This ring is a full remake of the Crochet Ring originally uploaded by @Milan . After using the original for a short while, my wife asked for a few changes. Specifically, she requested (1) a taller guide rail at the base of the ring and…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Wydruk około 17,13 €–20,94 € nettoWstępna wycena jednego wariantu
My only options for placement of my Nintendo Switch dock were behind the TV or laying down under it. Behind the TV gave us connectivity problems with the controllers. But laying down the Switch without modifications presented several…
Wydruk około 0,78 €–0,96 € nettoWstępna wycena jednego wariantu
Print with supports on build plate at 0.2mm. Increase infill density and/or perimeter count and/or material used to suit your strength needs. When you try to insert the ¼" screw, you'll need to penetrate the one-layer thick “threading”…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's hard to find project boxes with just the exact dimensions you need and even harder to cut square holes in the them. This OpenSCAD generated model is parameterized in width, depth, height and wall thickness. Set the dimensions you…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
An infinity cube concept with a different approach to the way the connector joints work, using an easy-to-print snap together design. My goal was to design a version that wouldn't have the issue with the unsupported first layer of the…
Wydruk około 4,30 €–5,25 € nettoWstępna wycena jednego wariantu
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Wydruk około 7,69 €–9,40 € nettoWstępna wycena jednego wariantu
I wanted to do some experiments with wind turbines of various types and then I designed these windmills for a simple installation in the garden. They are designed to be inserted in an aluminum rod Ø8 (usually Ø7.8/7.9mm) Dimensions large…
Wydruk około 3,86 €–4,72 € nettoWstępna wycena jednego wariantu
A companion cube from the video game Portal. Designed by Andrew Lindsey and available on Thingiverse here: https://www.thingiverse.com/thing:173570 I printed this as a cake topper for my Son's birthday cake. See the above Thingiverse link…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
This is a drawer organizer for Nespresso Vertuo pods inspired by the $20 ones you can find on Amazon. However, unlike those, you can customize this to exactly fit your drawer: just update the code with your drawer dimensions and generate…
Wydruk około 8,25 €–10,08 € nettoWstępna wycena jednego wariantu
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Wydruk około 11,72 €–14,33 € nettoWstępna wycena jednego wariantu
Sunlu S2 Dryer PTFE low friction filament guide - no drilling, no glue There are many PTFE filament guide adapters for the dryer but this one: Guide filament in most natural way from the roll to the PTFE tube. In fact it is in parallel…
Wydruk około 0,27 €–0,32 € nettoWstępna wycena jednego wariantu
I liked the ideas for Gridfinity credit card holders that were already posted, but I had a slightly different use case, i.e., a shallower drawer, and felt it could hold more to maximize storage space. I don't use a magnet system, so I…
Wydruk około 5,11 €–6,25 € nettoWstępna wycena jednego wariantu
Since I don’t have space for a standard spool holder and even for any vertical spool holder, i have used or rather tried to use horizontal spool holders. I have used multiple types from this website. E.g. i have used this one:…
Wydruk około 7,09 €–8,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This modified/kit-bashed buffer segmenter (front plate) for the MMU3 cassette buffer, in combination with @Melvin_131612's excellent MMU3 buffer mount allows the buffer to be mounted horizontally, lying down on its side. I made this…
Wydruk około 2,02 €–2,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've been testing the battery operated Blink Security Cameras (4th Generation) for my Promaster van. I wanted to make a magnetic mount that I could use on the outside. I wanted to use a large rubberized robust magnetic that wouldn't…
Wydruk około 4,09 €–5,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This pressurizer is designed to keep your padel balls under pressure after play. By preventing air from escaping the balls, they remain bouncier and better suited for consistent performance. This helps extend the lifetime of your balls…
Wydruk około 3,08 €–3,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Wydruk około 7,20 €–8,81 € nettoWstępna wycena jednego wariantu
This is a standard embroidery hoop that uses M3 fittings for the tightening mechanism. The default size has an inner hoop diameter of 80mm and a mesh file is included for that size. Please note that this model should be sliced with pauses…
Wydruk około 2,07 €–2,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The aim of this project is to provide an open source, top of the line camera slider for e.g. timelapses, that costs approx. $100. This project is somewhat advanced and requires several non 3d printed parts. This is to provide a slider…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I hate having to unclip my batteries to remove them from storage and liked the look of this model. So, I decided to remix it to my tastes. The indent removal allows you to slide batteries in and out easy! The slight upward angle will help…
Wydruk około 4,15 €–5,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hice dos diseños para el horno de un amigo que se le habían roto. Las imprimí el PLA pero no es lo más recomendable porque no tienen mucha resistencia al calor.
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
Addendum (January 2026) : In response to a comment ("the bottom lip that holds the phone is not quite wide enough") I added a second version (V02) with a wider lip. There are lots of phone stand prints available, but none of them quite…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu
There are lots of dust catchers out there for drilling into drywall walls. But I had to drill holes in my plaster ceiling. A lot of them. So I built this. It worked great for its main purpose. I have since parameterized it so it should…
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
So the problem you run into with 1990s cars that next to no one wants is, well, just that. Parts are near impossible to find at times due to demand not existing. Tried to find replacement pieces for the shifter on my 1990 Geo Prizm hatch…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
Need (2x) Rubber Bands. ASA recommended for UV resistance. One Size Fits All!
Wydruk około 2,61 €–3,19 € nettoWstępna wycena jednego wariantu
Feineinstellung für Lee Matrizen Ich verwende sie in der Hornady mit Schnellwechselsystem. So kann die Einstellung einfach und genau vorgenommen werden. Beim Drehknopf einfach einen 3mm O-Ring mit einlegen damit eine Klemmung stattfindet.…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena jednego wariantu
Gridfinity base mount on 40x40 extrusion panel. Print in 45° angle and use default support.
Wydruk około 0,75 €–0,91 € nettoWstępna wycena jednego wariantu
Our robot vacuum cleaner is 5mm too high to fit under a sideboard with its turret. That's why I gave it little feet. Now - as you can see - dust doesn't stand a chance under the sideboard either :) The Fusion360 model uses params to be…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
Home made USB MIDI controller with a motorized fader. It has only one physical fader, but it simulates 8 (virtual faders) with only one active at a time. Active fader is selected using the red buttons. In addition, there are 8 general…
Wydruk około 6,34 €–7,75 € nettoWstępna wycena jednego wariantu
Files Top Base Base with antenna Photos: Grey Print = No Antenna Black Print = Antenna Printing This model does not require external hardware to fit together. Printed without supports. Print setting used in photos: PLA, Prusa Mini + Input…
Wydruk około 1,86 €–2,28 € nettoWstępna wycena jednego wariantu
This is another approach to a large spool holder for 2kg spools. The extended adapter attaches directly to the existing center section. The vertical part reinforces the stability of the spool holder assembly. It can be placed on the left…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu
The standard Zyxel T-56 modem/router by the Dutch internet provider Odido is poorly designed when you don't want to put it on a table. If you want to mount it to a wall the cables can't be plugged in and/or the power button is…
Wydruk około 4,31 €–5,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print, push the two parts together with a firm grip until they snap in and then use simple double-sided tape to glue to desired drawer, cabinet door or other appropriate place. Once in place, you can insert/remove/replace paper labels as…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
This is a clip to attach a cable to a fence. Nail a normal nail into the fence, place the cable in this clip, and then hang it on the nail. If you want this already printed and mailed it is available to purchase here. I am the only one…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This custom horizontal phone holder is designed for the Fiat Grande Punto , offering a stable and centered position for your smartphone — perfect for navigation or music control without side distractions while driving. Originally designed…
Wydruk około 2,11 €–2,57 € nettoWstępna wycena jednego wariantu
Mom wanted something to hold her quilting rulers and, by Jove, I wanted to be a good kid and make Mama happy. I didn't know what the optimal dimensions were so I put together a model I could iterate on. Changeable parameters ( Autodesk…
Wydruk około 16,38 €–20,02 € nettoWstępna wycena jednego wariantu
This is a horizontal mount for a Bachmann STEP power strip. The clamshell distance that's aligned with the openGrid has been optimized for a single 5 outlet power strip. I'm not sure how this will align with e.g. 2× STEP 5s with regard to…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
This model is made to work and land in the middle of a 16mm panel. You may screw it from under the panel to ensure you leave no visible traces. The part fits perfectly the existing locks. I do provide the step file so you can easily tweak…
Wydruk około 0,60 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
1.- Introduction As with all prints I do, all start or from a need, a fix or a lust-to-have. Long ago (Few years ago) I posted a model for a toothbrush stand here in Printables. Now comes the second edition, which is a horizontal holder…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
I've added additional perimiters (4) to prevent water leaking inside - hope it's enough :) Infil is set to 15%, with grid fill pattern. Filament used was Prusament PETG Signal White. Made for Phillips Sonicare (Width at base: ~3cm,…
Wydruk około 3,95 €–4,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This 2-piece 3D model combines the functionality of two things: your desk phone stand, and a small tripod. Pixel 8 Pro is too heavy for small tripods so I created this to hold the phone leveled at flipped orientation when capturing…
Wydruk około 1,56 €–1,90 € nettoWstępna wycena jednego wariantu
This is a custom chassis adapter designed to motorize the OS.5 locomotive (Thing: 6552515) using a standard N20-based motor base. Since I scaled the original locomotive model up by 120% (20% increase) , I created this plate to perfectly…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
Many of the motorized turn tables on the internet today are too bulky and just have too many parts. This clever design repurposes a new Prusament spool side as the main platen, and three small printed pieces to make a super capable and…
Wydruk około 2,13 €–2,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Piezas para adaptar y motorizar un estor.
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
This is a cookie cutter with sharp edges for royal icing decorating. I think it looks nice at valentine's day to have many different heart shapes to pick from.
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
To fit on a MK4S you will need to scale it down a bit, I scale the X-axis to 85% and the Y-axis to 90% - will vary for other printers. To slice in vase mode apply the following settings: Horizontal Shells > Top = 0 Then I would recommend…
Wydruk około 7,73 €–9,45 € nettoWstępna wycena jednego wariantu
This battery cover is a replacement part for the Arizer Air SE vaporizer.
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
one Foot is as big as the printbed from the MK3S so you can only print one at a time It is not a perfekt fit but close enough and does the job gerat I printed them with a 0.6mm Nozzle with 0.2 mm layerhight and 4 outer shells. hope you…
Różne postacie znalezione na innych stronach, zmienione szczegóły w każdym i skompilowane w jeden kompletny zestaw.
This Cuban chain model is setup in a fully parameterized fashion, so that you can open it up in Fusion360 and change it to be whatever length or shape you need. Two versions are provided. The spiral approach allows for an impressively…
I was looking at the Honeycomb Storage Wall and it looked pretty neat. And I noticed that there's already a few people making various smaller or tiny printable versions. But what if you could pick out the exact size that you wanted? Maybe…
A simple doorstop for multi-material printing! Intended to print the contact surfaces from flexible filament, of course this is not a must ;) As flexible filament doesn't really bond well with e.g. PLA, the two parts are slightly…
Update 15.03.2024: remodeld the right side Update 14.03.2024: Uploaded a new file Update 03.03.2024: with the newly received photos I made a new testfile and Logo Version. Testfile V4 is out now Update 24.02.2024: Thanks to the Fotos from…
Please don't forget to like - I want my Prusameters! 😄 What's new? New Process Preset: 50mms FINE , prints with 0.10 mm layer height. All first layer speeds set to 40mm/s , to make the presets work universal out of the box. If everything…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Epic Charizard-inspired keycap for custom keyboards.…
Printing I printed these in white PETG at 0.2 mm for both the mount and diffuser and it works great. The diffuser is printed flat, and it's thin enough to bend into the curve that's shown. I tried transparent PETG for the diffuser, but…
I prepare Charizard for prusa Mini, but you can adjust the size if you want a Mega-Charizard ;) You can find here the original file : https://www.thingiverse.com/thing:4750833 Enjoy
Two Cards! Two Charizard!! First edition card in 3D and in 4D!! Charizard will come out of the card! I worked a lot to share my design with you! It is a delicat work of high precision. I hope you will love it! Charizard 3D Charizard 4D…
A modern take on a simple container with a screw top lid, that utilizes a threading style similar to a mason jar - making for an easy print, nice feel, and smooth use. A great accessory for stylishly organizing things in your bathroom,…
This is a model of the motorized carriage 810 commonly used by the czech railways. The model size is H0 (1:87), suitable as a wagon or motorized carriage for model railways. Read more at…
MTG Commander Deck Box 100+ sleeved cards. Default inner dimensions are: width 70, depth 65, height 93 mm but all can be adjusted. Parametrized Fusion360 file for easy adjustment included. MTG deck box for 100+ sleeved cards. Heavily…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) I used coin artwork from the Pokemon card…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . I needed a hollow, two-part,…
This is a Charizard sculpture based on its original artwork on the cover of the (western version of) Pokémon Red Version. It was originally meant to be a display stand for a Game Boy cartridge. However, since I didn't want to stray too…
Hello There I made a minimalistik version of my horizontal stand. I was inspired by Jon May and his digital stand. This version uses 50% less Material and has a little better fit. I hope you like this Version as well and post a make or a…
If you download the model, please don't forget to leave a like. Thank you! <3 Unleash the fiery spirit of the iconic Charizard! This unique design transforms the familiar character into a stunning low poly art piece. Each angular line is…
This DeWalt 20V battery holder mounts to the wall and positions the batteries horizontally at a slightly upward angle. This allows for the batteries to be stored closer together than the traditional vertical holders. Other battery…
V2 Design - Please leave comments with feedback how to improve the design! You may also like my other Design: Fishing Rod - Sharky - optimized for fishing while snorkeling or diving! → Also on MakerWorld with files for Bambustudio ←…
This stand can be used to set up the Playstation (disc version) horizontally. I have remixed the original model.
Release of the 2021 version (v4) Completely redesigned from scratch but kept most of the v3 design. I've done some extensive testing on all parts and the complete assembly so I suppose it would be fine to print. However if you experience…
Love the Charizard model. Prints very well. Recommend having very high purge volume for red/black filament, as some streaking can be seen in orange with normal purge volume (I did 120 and it wasn't quite enough). Multicoloration done…
Pre-cut for printing without support or in one piece.
The Thunderjaw from Horizon Zero Dawn modeled with CATIA V5.
Pre-cut for printing without support or in one piece.
This Milwaukee M18 battery holder mounts to the wall and positions the batteries horizontally at a slightly upward angle. This allows for the batteries to be stored closer together than the traditional vertical holders.
Because my girlfriend sat on my wand from first attempt ( https://www.thingiverse.com/thing:2508722 ) and broke it, I searched another, because model from TonePLA was too much symmetrical and didn't look like from movie. I decided to make…
The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts (and box) can be modified in Fusion 360 (f3d file available in the files section). You can increase the “InsertDummies” parameter to add…
We would like to create a new line of small flexi animals that are easy to print (print-in-place) and without supports. The number 26 is this cute bear grizzly 🐻, how does it look? 🐻 Toy, Keychain and Magnet version 🐻 | Print-in-place, No…
We are soon launching a KICKSTARTER ! Assembly documentation can be found here: https://outofmarbles.com/pages/docs You can also purchase a Hardware Kit for our Marble Machines. It will come in handy if you do not want to source the parts…
I was asked to print it in color. Scaled 65% from the original and with meshmixer supports in separate file.
[#1 updated the design slightly with a tapered ptfe tube hole to allow it to slide in better] [#2 updated it a little more to make it smoother to accept filament] An easy print to enable you to attach a wide filament spool to the side of…
My first attempt at iPhone 15 case. My daughter got a new phone, and the case (ordered online) was not due to arrive for a couple of days. I had a reel of flexible PLA, and figured that I could print one. But I couldn't find any existing…
Print it and snap it together Original size for MK3 https://www.printables.com/cs/model/229447-playstation-5-ps5-horizontal-stand 28.12.22 Added No Logo version 27.12.22 Added better joint for snap (preview image is with old joint)
Introducing the indominable Tallneck from Horizon Zero Dawn! This machine is to scale with the official board game and stands on an incredible 150mm base. It has been split into many easily printed parts that come together without any…
2024_05_28 Newer version of these files is located here. Old files still work fine and are still posted here. works with customizer and has more options for editing pre-entered data so only have to turn unwanted holes off. easier to turn…
This is a fast printing, fully parameterized cardboard style box. Why I did this I made this because I hated to print forever when I needed a little box, like a gift box or a container for srews or whatnot. This model is only 2 layers…
Pre-cut for printing without support or in one piece.
Hello all! I made this custom figurine model as gift. It came out quite well, so I decided to share it with the world some time ago, and I have to say that I'm quite happy with the results. Check this link for some finished results:…
Introducing the Sawtooth from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 60mm base. It is intended to be printed in one piece with the base separate. All credit for character design goes to…
Pre-cut for printing without support or in one piece.
Introducing the ultimate hunt, the Slaughterspine from Horizon Forbidden West! This machine is to scale with the official board game and stands on a 120mm base. It has been split into a few, easily printed parts that come together without…
Now you can get the Gridfinity Carousel with 100% more motors and gears! The design is based on the Bookwheel mechanism by Agostino Ramelli. The Carousel has a total of 50 Gridfinity squares and can fit bins up to 7 units tall (49 mm),…
I needed to store small hardware, but was limited on vertical space. This design is fully parametric and can be added to any spool based on the height, diameter, and the number of drawers needed. The STL files included are for a 12 drawer…
This 100% 3D-printed mechanical solar system includes all eight planets, designed with custom gear ratios to precisely reflect their true relative orbital periods. To make the model practical in size, both the planets' physical sizes and…
Update: I've released a completely reworked version of this design which comes with a whole host of improvements. Check it out here: https://www.printables.com/model/912094-motorized-escalator-model-redux This is a motorized version of my…
