3,694 models
one Foot is as big as the printbed from the MK3S so you can only print one at a time It is not a perfekt fit but close enough and does the job gerat I printed them with a 0.6mm Nozzle with 0.2 mm layerhight and 4 outer shells. hope you…
I don't have the space to stand the PS5 vertically, and I wasn't happy with the console's shakiness without some stabilizing shims. I couldn't find anything for the PS5 Digital Edition, so I made this remix. The two stands are radially…
MTG Commander Deck Box 100+ sleeved cards. Default inner dimensions are: width 70, depth 65, height 93 mm but all can be adjusted. Parametrized Fusion360 file for easy adjustment included. MTG deck box for 100+ sleeved cards. Heavily…
Hello There I made a minimalistik version of my horizontal stand. I was inspired by Jon May and his digital stand. This version uses 50% less Material and has a little better fit. I hope you like this Version as well and post a make or a…
I made this model based on my fiancee's ACNH house. I scaled it to fill a i3, but printed it myself at 50% scale. The only issue with that size was the door nob breaking off. Broken into different parts so they can be printed in different…
We are soon launching a KICKSTARTER ! Assembly documentation can be found here: https://outofmarbles.com/pages/docs You can also purchase a Hardware Kit for our Marble Machines. It will come in handy if you do not want to source the parts…
This ring is a full remake of the Crochet Ring originally uploaded by @Milan . After using the original for a short while, my wife asked for a few changes. Specifically, she requested (1) a taller guide rail at the base of the ring and…
This is a fully parameterized mount for power strips, but it will fit any other rectangular thing you want to mount on a flat surface (like my Dell PSU). I found some designs here, but none fitted the strips I had at home. The .3mf file…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
My only options for placement of my Nintendo Switch dock were behind the TV or laying down under it. Behind the TV gave us connectivity problems with the controllers. But laying down the Switch without modifications presented several…
Print with supports on build plate at 0.2mm. Increase infill density and/or perimeter count and/or material used to suit your strength needs. When you try to insert the ¼" screw, you'll need to penetrate the one-layer thick “threading”…
It's hard to find project boxes with just the exact dimensions you need and even harder to cut square holes in the them. This OpenSCAD generated model is parameterized in width, depth, height and wall thickness. Set the dimensions you…
An infinity cube concept with a different approach to the way the connector joints work, using an easy-to-print snap together design. My goal was to design a version that wouldn't have the issue with the unsupported first layer of the…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
I wanted to do some experiments with wind turbines of various types and then I designed these windmills for a simple installation in the garden. They are designed to be inserted in an aluminum rod Ø8 (usually Ø7.8/7.9mm) Dimensions large…
We are soon launching a KICKSTARTER ! Price for .STL will be: "Pay what you want". Click the link to get notified. Assembly documentation can be found here: https://outofmarbles.com/pages/docs This lifting mechanism is the first stage of…
A companion cube from the video game Portal. Designed by Andrew Lindsey and available on Thingiverse here: https://www.thingiverse.com/thing:173570 I printed this as a cake topper for my Son's birthday cake. See the above Thingiverse link…
This is a drawer organizer for Nespresso Vertuo pods inspired by the $20 ones you can find on Amazon. However, unlike those, you can customize this to exactly fit your drawer: just update the code with your drawer dimensions and generate…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Sunlu S2 Dryer PTFE low friction filament guide - no drilling, no glue There are many PTFE filament guide adapters for the dryer but this one: Guide filament in most natural way from the roll to the PTFE tube. In fact it is in parallel…
I liked the ideas for Gridfinity credit card holders that were already posted, but I had a slightly different use case, i.e., a shallower drawer, and felt it could hold more to maximize storage space. I don't use a magnet system, so I…
Since I don’t have space for a standard spool holder and even for any vertical spool holder, i have used or rather tried to use horizontal spool holders. I have used multiple types from this website. E.g. i have used this one:…
Arizona Cardinals 1st Layer White 2nd Yellow 3rd Red 4th Black
I designed this for my King Industrial 14inch band saw model KC-1433FXR, It also fits Grizzly model G0555 bandsaws as these are the same bandsaws with different branding…. This has a much smaller slot that lets you get in close with small…
This pressurizer is designed to keep your padel balls under pressure after play. By preventing air from escaping the balls, they remain bouncier and better suited for consistent performance. This helps extend the lifetime of your balls…
This bracket replaces the PSU terminal cover so that the Black PSU can be more firmly mounted under the Lack Enclosure.
Make a motorized rotating display stage with your printer + off the shelf hardware. I printed this in ABS and tested it to about 190 lbs! Affiliate Amazon links for the parts I used: - 8 inch ball-bearing lazy Susan:…
Fiber polarization controller (FPC) developed as an open source alternative for commercial ones. Thanks to the user-specified fiber-loop diameter, it allows printing the FPC for a given wavelength, with single-paddle operation very close…
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
I figured this would make a nice display piece and be fun to paint. Instructions: Print it on its side at about a 45 degree angle with supports to reduce the stepping effect.
Introduction I designed these hex shelves to organize my benchy collection. I wanted a way to record both the material properties (manufacturer, material, color name) while displaying a benchy and this was my solution. I have uploaded…
This is a standard embroidery hoop that uses M3 fittings for the tightening mechanism. The default size has an inner hoop diameter of 80mm and a mesh file is included for that size. Please note that this model should be sliced with pauses…
The aim of this project is to provide an open source, top of the line camera slider for e.g. timelapses, that costs approx. $100. This project is somewhat advanced and requires several non 3d printed parts. This is to provide a slider…
This is a screw mounted zip tie mount. It fits 4mm DIN screws, but you can edit the .scad file to make it fit any screw or zip tie. To customize, you will need OpenScad and the dimensions relevant for customizing (just measure them but…
This model can be printed in any material, but i recommend PETG. The model should be printed strong, so i recommend 4 perimeters and 25% infill. Happy Printing!!
Laptop Stand Rizer, distanziale per pc portatile Nice and elegant riser stand for your laptop. Print instructions: Use PLA or PET Use 0,30 mm layer height with 10% infill No support o brim needed
I hate having to unclip my batteries to remove them from storage and liked the look of this model. So, I decided to remix it to my tastes. The indent removal allows you to slide batteries in and out easy! The slight upward angle will help…
printed at 100mm or less good detail and low print time.
Addendum (January 2026) : In response to a comment ("the bottom lip that holds the phone is not quite wide enough") I added a second version (V02) with a wider lip. There are lots of phone stand prints available, but none of them quite…
Certainly better vertically, but prevents the top of the enclosure from opening. To be fixed with screws on the Ikea enclosure top. Now in color!
There are lots of dust catchers out there for drilling into drywall walls. But I had to drill holes in my plaster ceiling. A lot of them. So I built this. It worked great for its main purpose. I have since parameterized it so it should…
This is a remix of the following models: https://www.printables.com/model/152592-honeycomb-storage-wall https://www.printables.com/model/164614-honeycomb-storage-for-ikea-lack-enclosure…
So the problem you run into with 1990s cars that next to no one wants is, well, just that. Parts are near impossible to find at times due to demand not existing. Tried to find replacement pieces for the shifter on my 1990 Geo Prizm hatch…
This is a little box for herb storage, made to fit inside the Pax Vaporizer case from this link: https://www.printables.com/model/705119-pax-23mini-vape-charger-case-combo-storage But you can always print and use it however you like, as a…
Charizard model for home decoration settings: no supports 0.2 quality PLA-ABS-PETG-TPU filaments are good for this print Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Need (2x) Rubber Bands. ASA recommended for UV resistance. One Size Fits All!
3 slots organizer for baking powder. The holes allows you to grab the powder easily. Internal dimensions of the slots are : 70mm by 100mm. Dimensions of the whole organizer : 106mm by 220mm. Height : 55mm
I was getting tired of the stiff sauce alway's giving you a fight before your can eat. And is it just me, or does the sauce alway's seem to go to the bottle faster then toward the opening in between squeezes? Now its fixed =^.^= Can be…
Pro tvorbu modelu v Tinkercadu jsem použil ikony kotlů ze hry jako inspiraci. Ke stažení je verze pro jeden extruder s výměnou barvy po určité vrstvě i verze pro MMU (model rozdělen na 3 kusy pro různé barevné kombinace). Edit: Na fotkách…
Feineinstellung für Lee Matrizen Ich verwende sie in der Hornady mit Schnellwechselsystem. So kann die Einstellung einfach und genau vorgenommen werden. Beim Drehknopf einfach einen 3mm O-Ring mit einlegen damit eine Klemmung stattfindet.…
Stand for Arizer Stems with space for small parts I was not happy with the normal print file, so i decided to print this thing in spiral vase mode. You can use the Spiralvase Mode Modell / use the attached .3mf file for print instructions…
Easy print, but need to get the settings right (see 3mf.) PLA, 5% infill, modifiers of 100% for bottom and back.
Introducing the Tsunami SUP Paddle Clip Set, designed to securely hold paddle pieces together for enhanced stability during your paddleboarding adventures. Optimized for Tsunami SUP paddles, this set features a parameterized design for…
The awseome cool thing in the openscad model is the ability to place the screw holes on an angle you need. In this case the screw holes have not been evenly spread, but on strange angles.
Gridfinity base mount on 40x40 extrusion panel. Print in 45° angle and use default support.
Our robot vacuum cleaner is 5mm too high to fit under a sideboard with its turret. That's why I gave it little feet. Now - as you can see - dust doesn't stand a chance under the sideboard either :) The Fusion360 model uses params to be…
Card & token organizers for the board game 'Horizons of Spirit Island'.
This is a small medallion that can be customized for any occasion and individual. There is a recess on the underside that accepts a 8mm by 3mm neodymium magnet so it can be glued in and used as fridge magnet for prominent display on the…
Files Top Base Base with antenna Photos: Grey Print = No Antenna Black Print = Antenna Printing This model does not require external hardware to fit together. Printed without supports. Print setting used in photos: PLA, Prusa Mini + Input…
The HF-WE-007 Drill Stand is a compact 3D-printed holder designed for drills with a 43 mm auxiliary-handle collar. It keeps the drill in a fixed horizontal position and was tested with the Black & Decker HD555K. Tested accessory setups…
A week ago, I started working for a new employer and, to my surprise, I received a company phone – an iPhone 16. Since its use is limited to confirming logins to company systems, I thought it would be a good idea to have it on my computer…
Replacement part for broken overfill cover in an old bathtub. With default parameters it fits a system with 42mm or slightly larger hole, where it is screwed with a single screw to the pipe on the other side. You can open the source in…
Print, push the two parts together with a firm grip until they snap in and then use simple double-sided tape to glue to desired drawer, cabinet door or other appropriate place. Once in place, you can insert/remove/replace paper labels as…
Notice: Most of this is not my work please don't credit me for it, all I did was add a few better parts and organise them. The github has full instructions for how to install and set up. I recommend downloading the files to print from…
This is a clip to attach a cable to a fence. Nail a normal nail into the fence, place the cable in this clip, and then hang it on the nail. If you want this already printed and mailed it is available to purchase here. I am the only one…
This custom horizontal phone holder is designed for the Fiat Grande Punto , offering a stable and centered position for your smartphone — perfect for navigation or music control without side distractions while driving. Originally designed…
Remix of Voron Mod Ender Wire
This mount enables secure attachment of a Büchel rear light to an Ergon bicycle saddle. It is screwed onto the two metal saddle rails. The holder is designed for a rail spacing of 41.9 mm (center to center). The rear light is secured via…
I created this highly customizable corner brace using the Fusion 360 “show dimensions” feature so you can directly edit the overall dimensions, just double click on the numbers in the DESIGN workspace and edit as need, no parameters…
Designed to be mount-taped onto my car dash so I can drop my Jelly 2 cellphone in and go. If you're enjoying models like this, please consider supporting us on Patreon so we can continue making great content for you.…
This dripper stand is made specifically for the Hario size 02 plastic dripper, but I've provided my original Fusion 360 file (f3d) which is fully parameterised. The provided version of the .3mf and .stl has an inside diameter of 50mm. If…
2022/11/12 - UPDATE: You can find the updated Version of this Case here: https://www.printables.com/model/315914-arizer-air-max-case-v4 You need 8 Magnets with Dia 4x3mm for the Cap, ensure you place it in the right direction. For the Cap…
PLAY, Motorized Marble Race Motor Part
Mom wanted something to hold her quilting rulers and, by Jove, I wanted to be a good kid and make Mama happy. I didn't know what the optimal dimensions were so I put together a model I could iterate on. Changeable parameters ( Autodesk…
Horizontal Lamp Designed for red light therapy lamp MITO LIGHT Bulb 3.0 ( https://www.mitolight.cz/mito-light-bulb-3-0/ ). can be used for any bulb with a 4cm socket. You can support me with Bitcoin or Lightning network HERE or normal…
This is a horizontal mount for a Bachmann STEP power strip. The clamshell distance that's aligned with the openGrid has been optimized for a single 5 outlet power strip. I'm not sure how this will align with e.g. 2× STEP 5s with regard to…
You can use this clip-on hanger if you want to hang rope/string/cable or fiber coils and you have a hanging rod. OpenSCAD file for parametrization is available here
more stable horizontal stand for Puzzle box No.1 STAND ONLY! Stand for Puzzle box No. 1 from https://www.etsy.com/de/ → realy great Puzzle Box by the way! The default stand, which one comes with the model is very unstable,
Define width/height/depth in OpenSCAD file as necessary. You can also set the diameter of holes for insects and increment of the size for each row (can be set to 0 to have all holes with same size) The design will auto-fill the hotel with…
I've added additional perimiters (4) to prevent water leaking inside - hope it's enough :) Infil is set to 15%, with grid fill pattern. Filament used was Prusament PETG Signal White. Made for Phillips Sonicare (Width at base: ~3cm,…
Piezas para adaptar y motorizar un estor.
To fit on a MK4S you will need to scale it down a bit, I scale the X-axis to 85% and the Y-axis to 90% - will vary for other printers. To slice in vase mode apply the following settings: Horizontal Shells > Top = 0 Then I would recommend…
Horizontal brick layers modifier Updates: 2026.09.25: I added "This Way Up" icons to the top of all of the modifier STLs because it can get very confusing very fast if you rotate a model. It is important that the modifier be correctly…
Created using form function (aka t-spline ) in AutoDesk Fusion360 combined with NetFabb (2024). Added the color change (requires MMU or XL multitool.
This battery cover is a replacement part for the Arizer Air SE vaporizer.
A quick design I made for my IKEA SKRUBB basket to separate larger from smaller pieces of failed prints. Can easily be adapted to other basket sizes.
This is a simple bracket modification instead of the factory Decathlon RL 510 design: with this you can install the lamp in a horizontal, so you can remove easier for charging, need less space for the ligth, you can set your seat position…
Różne postacie znalezione na innych stronach, zmienione szczegóły w każdym i skompilowane w jeden kompletny zestaw.
This Cuban chain model is setup in a fully parameterized fashion, so that you can open it up in Fusion360 and change it to be whatever length or shape you need. Two versions are provided. The spiral approach allows for an impressively…
I was looking at the Honeycomb Storage Wall and it looked pretty neat. And I noticed that there's already a few people making various smaller or tiny printable versions. But what if you could pick out the exact size that you wanted? Maybe…
A simple doorstop for multi-material printing! Intended to print the contact surfaces from flexible filament, of course this is not a must ;) As flexible filament doesn't really bond well with e.g. PLA, the two parts are slightly…
Update 15.03.2024: remodeld the right side Update 14.03.2024: Uploaded a new file Update 03.03.2024: with the newly received photos I made a new testfile and Logo Version. Testfile V4 is out now Update 24.02.2024: Thanks to the Fotos from…
Please don't forget to like - I want my Prusameters! 😄 What's new? New Process Preset: 50mms FINE , prints with 0.10 mm layer height. All first layer speeds set to 40mm/s , to make the presets work universal out of the box. If everything…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Epic Charizard-inspired keycap for custom keyboards.…
Printing I printed these in white PETG at 0.2 mm for both the mount and diffuser and it works great. The diffuser is printed flat, and it's thin enough to bend into the curve that's shown. I tried transparent PETG for the diffuser, but…
I prepare Charizard for prusa Mini, but you can adjust the size if you want a Mega-Charizard ;) You can find here the original file : https://www.thingiverse.com/thing:4750833 Enjoy
Two Cards! Two Charizard!! First edition card in 3D and in 4D!! Charizard will come out of the card! I worked a lot to share my design with you! It is a delicat work of high precision. I hope you will love it! Charizard 3D Charizard 4D…
A modern take on a simple container with a screw top lid, that utilizes a threading style similar to a mason jar - making for an easy print, nice feel, and smooth use. A great accessory for stylishly organizing things in your bathroom,…
![Herb Box for Pax Vaporizer Case [Check Description for the Case Link]](https://media.printables.com/media/prints/705919/images/5538669_7055d50e-be23-4379-96a0-053a71de9784_400f7731-c4be-42be-80da-203238f3f178/img_7357.jpg)
![Ender 3 Switchwire Y Tensioner Mod Remix [Grizzle mod]](https://media.printables.com/media/prints/578739/images/4657879_9c6ec1f9-c236-4db0-81d7-8deaa96c6c3b/img_6953.jpeg)
![Rope / cable / fiber hanger for horizontal rods [parametric]](https://media.printables.com/media/prints/756522/images/5900593_ef8be5bb-4fa3-4757-a435-cf7725dd69f4_eebecbba-ebad-4e1b-b4ad-39393213dfc3/in_use.jpeg)
