2851 modeli
Chose one of 3 designs to download for the Samsung Galaxy S22, S22+ and S22 Ultra are incompatible. All 3 cases work with wireless charging, have exposed power and volume buttons, and have a lip to protect the screen. None of the variants…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
Samsung Galaxy Watch 4 - Body Case - 44 mm
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
This is a design of a VESA adopter designed to fit Samsung Odyssey G9 screens. Adapter is reinforced with M8 Bolts. Hardware list: 2 x M8 x 70 mm - to reinforce 3D printed part with clamp force and take up the bulk of sheer force 4 x M4 x…
Wydruk około 12,27 €–15,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A remix of "Galaxy Watch 5 Active Charging Stand" to fit the 47mm model of the Galaxy Watch 6 Classic. I printed it with 100% infill to give it some proper weight :)
Wydruk około 3,85 €–4,71 € nettoWstępna wycena jednego wariantu
I recently purchased the Samsung Galaxy Watch 4 Classic, and I wanted a charger stand, but I couldn't find a model that I liked so I designed my own. This watch charger combines sleekness and functionality into one model. The curves of…
Wydruk około 1,45 €–1,78 € nettoWstępna wycena jednego wariantu
A fancy charging stand for the Samsung Galaxy Watch 6 Classic 47mm! It might work for other versions or watches as well, but I didn't test that! The diameter of the charger-hole is 29.5mm I added a piece of 1mm thick sticky foam where the…
Wydruk około 2,58 €–3,15 € nettoWstępna wycena jednego wariantu
I was not satisfied for my A53. So I fix size and also I edit model to be printable only with PLA and fit for samsung A53.
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
Phone case for the Samsung A22 With raised lip (height about 1.5 mm) for a better protection of the display. Compared to the original model, the case is about 1.5 mm thicker. The edge is not flush with the display. Printed in PETG or PLA.…
Wydruk około 3,69 €–4,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wanted to use my Samsung Fold 3 while sitting up on my bed watching TV and needed a stand which would work on the sheets and covers without falling over, so I designed this. Printed in Prusament PLA with .4 nozzle and .3 layer height on a…
Wydruk około 4,89 €–5,97 € nettoWstępna wycena jednego wariantu
I print the one that is used with the SolidSuit with an adaptive layer height from 0.12 to 0.2mm to save approx. 2h (compared to a full 0.12mm layer height). I only print the stand for smartphone with RhinoShield SolidSuit because I never…
Wydruk około 7,14 €–8,73 € nettoWstępna wycena jednego wariantu
Egg holder for 13 eggs.
Wydruk około 2,87 €–3,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adapter to mount a Samsung LS24D-Series Monitor on a standard VESA 100x100 mount. Print the Base, the Pin and the Shell separately and use a threaded insert in the base. Fit the Shell around the Pin and screw the Pin onto the base. Some…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Samsung Galaxy A33 Groot case
Wydruk około 2,78 €–3,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Story: My brother gifted me a Smarttag 2 for my birthday and I wanted to be able to locate my bike. Therefore I needed to find a way to attach the Smarttag to my bike . I have designed a case that can be attached under a bike seat with…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
💬 Summary A set of protective lens caps designed for the Samsung Galaxy S24 Ultra . These caps fit over the three main camera lenses to prevent scratches, dust accumulation, and impact damage. A simple, fast print that adds a layer of…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
This is a holder for Samsung Galaxy Tab A9 Lite SM-X110 tablet, which you can screwto the wall. Power would come from the back. I would recommend getting angle power cable. Description on Youtube:
Wydruk około 8,16 €–9,97 € nettoWstępna wycena jednego wariantu
A snap-fit Samsung A05 phone case to protect the phone exterior. It is recommended to print the case on the back face. However, depending on the print setting used, the underside radius form (shape) nearest the print bed may need some…
Wydruk około 1,79 €–2,18 € nettoWstępna wycena jednego wariantu
Ce support permet de recharger une montre Samsung Watch lorsque l'on a mis un bracelet qui ne s'ouvre pas en 2 parties
Wydruk około 5,22 €–6,38 € nettoWstępna wycena jednego wariantu
Copact Stand for Samsung wireless watch charger. Its designed for originalwireless charger from samsung. We tested it with charger from Samsung galaxy active and samsung galaxy Watch4. I printed it with TPU, but PLA or PETG work well. PLA…
Wydruk około 3,25 €–3,97 € nettoWstępna wycena jednego wariantu
Wall mountable (Command strips) phone holder for Samsung S9 (May fit other devices) when the device has a case on. The build will require supports.
Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu
There are TWO versions of this one in the model section: Wired version, slide in and connect to a general usb c plug. I made this for a generic usb c plug, but they are different thickness so you might need to adjust the height of the USB…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Please leave a ♥ Like if this print was helpful to you :-) Mounting Instructions Please make sure to wall mount one SIDE first. Do not mount the bottom and then top parts. It is easiest mounted with a friend helping to hold the mounts…
Wydruk około 1,87 €–2,29 € nettoWstępna wycena jednego wariantu
Replica of a clip used in some Samsung fridges. OEM Part #: DA61-04809A A brim is suggested if running off multiples.
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was looking for a new cover for my Samsung Galaxy A7 and obviously had to create one with the Prusa Research by Josef Prusa logo to fit with all my other stuff. Update 5/24: I replaced the design with a new and improved version. The…
Wydruk około 2,00 €–2,44 € nettoWstępna wycena jednego wariantu
A simple holder for the Samsung Galaxy Watch 4 for an IKEA Skadis board. I didn't want to always have the watch with the charger on the table, so I remixed this file and added the holders for the Skadis board. I also made the bottom a…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
0.15 approximately 18 hours at 75% speed 0.20 about 15 hours at 75% speed nozzle 0.4 support needed gcode included
Wydruk około 12,43 €–15,19 € nettoWstępna wycena jednego wariantu
Cradle for mounting a Samsung Galaxy S10 in a car. Features: Simple drop-in Built-in wireless charger Holds uncased phone in landscape orientation Lockable ball-and-socket joint Clearance cutout for phone's cameras Side buttons and USB-C…
Wydruk około 2,17 €–2,65 € nettoWstępna wycena jednego wariantu
Attach your Samsung Galaxy Watch / Active Wireless Charger to a table. After printing, glue or screw it on the bottom of the table. Then just place the wireless charger Tested with the original wireless charger of a Samsung Galaxy 4. I…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a bedside Every Day Carry (EDC) caddy. I built this for: a built in watch charger holder for the Samsung Galaxy Watch Ultra a ridge type wallet with money clip (and a lot of cards A pocket knife slot (I have bench made with pocket…
Wydruk około 5,77 €–7,06 € nettoWstępna wycena jednego wariantu
NOTE: Print tilted at 45 degrees angled up off the build plate to provide enough structural support for both the clips and center post. This piece is held into the decorative knob shell with 4 Phillips screws. Simply unscrew the old…
Wydruk około 2,62 €–3,20 € nettoWstępna wycena jednego wariantu
I forgot to move the seams so it looks a little ugly when you get up close. You can't see them unless you are laying on the floor so I decided to leave it alone. Printed vertically. Good for most of these types of remotes:
Wydruk około 4,42 €–5,40 € nettoWstępna wycena jednego wariantu
Since I didn't want to open the cover every time I wanted to use the flashlight, I constructed a compatible sliding cover. To avoid accumulation of dust, however, I did not want a hole at the location of the flashlight. The flashlight is…
Wydruk około 0,24 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Samsung Galaxy A32 kryt na telefon s logem Mini Cooper. Kryt byl vytištěn z PLA na karbonové podložce s následujícími parametry: Materiál: PLA (Silver, White) Tiskárna: Ender 3 V2 neo Výška vrstvy: 0,2 mm Infill: 15% Rychlost tisku: 50-…
Wydruk około 2,22 €–2,71 € nettoWstępna wycena jednego wariantu
A horizontal holder for the Z fold 4 to prevent camera wobble. Makes it more comfortable to use for long writing/drawing sessions. Fits the phone without any cases. Also has a place to put the S pen that came with the z fold 4 case. Has a…
Wydruk około 1,23 €–1,50 € nettoWstępna wycena jednego wariantu
Ford Dashboard Storage & Samsung Z Fold 4 Phone Holder
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
This case has an open back, it surrounds just the edge and the cameras to make it easier to hold and add some fall protection. It needs to be printed in TPU or another flexible material. The original has 5 holes in the edge for buttons,…
Wydruk około 0,80 €–0,98 € nettoWstępna wycena jednego wariantu
The holes are adapted to the Cuda console. Die Bohrungen sind an die Cuda-Konsole angepasst.
Wydruk około 3,77 €–4,61 € nettoWstępna wycena jednego wariantu
Edited model of Samsung Fold5 Desk Stand.
Wydruk około 6,94 €–8,49 € nettoWstępna wycena jednego wariantu
I repaired the handle of my freezer with a simpe design that only took 4 grams of filament and half an hour to print. It has saved me a lot of money and the fridge looks like brand new again! I recomend to print it in PLA with a 0.4…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
This adapter goes in place of the factory supplied stand/feet for the TV. In my case I wanted to mount the soundbar under the TV and the hardware I had wasn't optimal. Remove the feet and bolt on these adapters. There are M8 mounting…
Wydruk około 2,69 €–3,28 € nettoWstępna wycena jednego wariantu
Das Modell besteht aus 4 Teilen: Cover, Top, Gelenk und Bild(er) Notwendig sind 4 Schrauben um die Teile miteinander zu verbinden. Abbildung Schraube bei den Fotos. The model consists of 4 parts: cover, top, joint and image(s) You will…
Wydruk około 1,68 €–2,06 € nettoWstępna wycena jednego wariantu
The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…
Intended to be FDM printed as a single piece with no supports required. Designed for continuous watch bands but should also work with any watch band as long as the band width does not exceed 24mm otherwise the lower strap will interfere…
Modèle 3D d'un support de charge pour la Samsung Galaxy Watch 4 et 4 Classic. 3D Model of charging station design for Samsung Galaxy Watch 4 and Watch 4 classic Paramètres d'impression / Print Settings Marque / Printer Brand : Artillery…
I originally designed a replacement 3D printed knob for a Smeg oven after struggling to find a replacement. I've since added a total of 7 customisable Knob designs and 5 customisable Inserts that can be mixed and matched to create the…
TPU CASE for Samsung Galaxy S24 Ultra As I have to wait for a few weeks for my leather case to arrive, I decided to model up a TPU Case myself for my Samsung Galaxy S24 Ultra. WIP - Im currently testing it myself, but it fits nicely so…
A stand to charge your Samsung Galaxy Watch 4/5/5 Pro/6/7/Ultra with cable management! It supports all sizes for all the watches: Galaxy Watch 4 Classic 42/46mm Galaxy Watch 4 40/44mm Galaxy Watch 5 40/44mm Galaxy Watch 5 Pro 45mm Galaxy…
I made a wall support for the Galaxy Tab A9+. As the model is quite large with a side measuring 264mm, I used my Sidewinder X1 3D printer to print it. (You can find the version for the Tab A9 (8,7") here Samsung Galaxy Tab A9 Wall Mount…
Simple case for the Samsung A54. I have included a fusion360 file. It also includes modifications to fit 2 cards (ID, credit card...) and to hold 2 coins; 1 and 2 euros in size, to unlock shopping carts. I did some modifications to…
Should be fairly straight forward to print. I've had good results without supports but you may need some just for the side cutouts. Can be easily customized by removing top and bottom layers, increasing wall count and playing with the…
S24 Ultra 3d model, high level detail, precisely and carefully made. UPDATE: model is EVEN more precise and accurate and has more available download files (STEP, OBJ and MTL). Best print settings(on anycubic kobra 2 max): infill 40%, brim…
A ceiling mount for a samsung freestyle beamer, which allows the beamer to be quickly mounted and dismounted. The beamer should easily fit in and stay there. If the model is printed with PETG, it is strong enough to hold the beamer, but…
A protective case for the Samsung Galaxy A55 designed to be printed in flexible filaments like TPU. The STEP file is also provided for easy customization in the CAD program of your choice. 2024/06/21 : Updated the design to be 0.6mm…
This is a nice and simple case for the S22 Ultra, the back should just be high enough to keep the cameras from touching the table. This should not intrude with the touch screen or any of the ports. If you have trouble attaching the case,…
3 versions of Samsung Galaxy S22's case. Basic For Magsafe ring (you have to pause printing after layer 5 for 0.2 mm printing and insert metal ring - https://amzn.to/44DidrA) For credit/transport card I printed the case in TPU (90A/40D)…
I'm not sure if it can keep up with a store-bought cover in terms of quality. But it could be useful as a quick interim solution. There is a small pocket on the inside for holding a credit card or some money. Print Material: TPU / Flex…
2.5mm thick tpu phone case for a Samsung galaxy A15 with built in supports( to be cut or drilled away after printing). Case in photo was made with clear tpu with no top or bottom layers for faster printing, more flexibility, less used…
This is a case I designed for my S21 Ultra. I was not happy with the few printable models I found online for the S21 Ultra. After I made 5 prototypes I discovered that TPU was super slick in the hand so I added the honeycomb texture to…
DE: Eine edle Ladestation für deine Samsung Galaxy Watch. Passend für: -Galaxy Watch5 40mm und 44mm -Galaxy Watch5 (Classic) 45mm -Galaxy Watch6 40mm und 44mm -Galaxy Watch6 (Pro) 43mm und 47mm -Galaxy Watch7 40mm und 44mm Aussparung…
Just a clean flat S10+ case. Images 2 and 3 are modifier meshes in PrusaSlicer
Samsung Galaxy Watch 4, 5, 6, 7 & 8 charging stand printed to hold charging puck. Just insert the puck into the location and run the cable along the tracks. Depending on your print settings, the puck will be a snug fit. You may have to…
Samsung Galaxy Watch 5, 6, 7 & 8 Pro charging stand3d printed to hold charging puck. Tgis is for the orginal charger from samsung. Often arftermarket chargers are a different dimension. Just insert the puck into the location. Run the…
This is a thin, light weight case for the Samsung Galaxy Fold 7. Your printers needs to be dialed in as there are lots of overhangs, thing spindly bits. and even some straight up unsupported lips. I printed with no supports, .12 layer…
New phone, new case - a fun way of adding some colour to your S25 Ultra! I've learnt some things since the S22 Ultra Case , so this now lays flat on the front and back of the phone without touching the table and generally feels smoother…
About I designed this cover to protect my new Buds 3 Pro case from scratches. It should also work with the normal Buds 3 since they are the same size. The cover has a snug fit and lets you access the case's functions. Print settings I…
This is a simple TV remote holder that attaches to a wall or flat surface. The model is designed to use Gorilla mounting tape but it also has 2 4mm holes with a 1mm chamfer. To note there is no issue with the Gorilla tape sticking to any…
This is Samsung Galaxy A34 case model. Variants: There are 3 main variants of this model in the files below: blank cover (can be used for custom ornament) with honeycomb ornament with cam-cut pattern And each variant is also available…
Summary Drain spout sized to 65 mm that fits a Samsung washing machine (my model number: WW70K44205W/EG). The Reason to Publish I searched across all major platforms and found various models that could work for my washing machine, but all…
Print this in TPU. I modeled this with help from reference images from the internet and fixed after testing on a real phone UPDATE 1: I redid the placement and shape of holes on top and bottom, according to better reference images. I…
Modified the case to include a bigger lip around the display to compensate for the extra height of a screen protector, and be deep enough to provide more protection to the cameras. I initially wanted to add a lip around the camera bump,…
remix, added honeycomb on the back
Bottom is flat. Case is tested. Best printed slowly in TPU.
A friend wanted his own case for the new Samsung Galaxy A33, so I was happy to model and print it for him. After two iterations it was done. He wanted this "beam" ornament. But you can create your own . In the files you will also find the…
I redesign the model created by Callan McNamara of a case for the Samsung Galaxy A52 phone. I adjust the cut out for buttons and connectors, tightened the case and proposed an other pattern cut out in it. I tried to print it in flexible…
Simple case for S23. Project made for TPU; print with supports.
This model is based one this model which was made for S23. Had to modify it to work with S24 like the extra microphone hole & make the button easier to press. https://www.printables.com/model/682711-samsung-galaxy-s23-tpu-slim-case
Bedside charging station for your phone, Samsung Galaxy Watch 4. I have a Galaxy S9+ but it should work with most phones. This may work with other chargers also. The Watch charging base is 33.5mm wide x 9mm deep.
Updated model Edit 4.2.2025 Added PETG model That can use also camera cover thath can be seen in gallery. I printed mine without any solid top-, bottom layer and perimereters. Just printed 3d honeycomb with 50% infill. It is very…
Samsung Galaxy S23 rugged phone case - to be printed with TPU, with 0.6mm nozzle.
Designed with air pockets around the edges to better withstand falling to the floor. When printed with the right TPU A95 material, this case is very durable and will outlast your phone.
An universal mount for Samsung Freestyle projector. It will be used for wall mount but it should work also for ceiling mount. It is shaped to avoid limiting adjustment projector position. There are two 4 milimeter holes, to secure it on…
I design this case but to help bring case together i recommend a rub like cloth rub.
This sleek wall mount is designed specifically for the Samsung TAB A8, featuring a 10.5-inch display. It prints effortlessly without the need for supports, and all components easily snap together, eliminating the need for glue or…
I printed it with PLA and a layer height 0.20 in a Bambu Lab P1S. I printed it with Bambulab PEI textured plate and with a PEO hologram-ish-thingy plate to get the effect in one of the prints. hope it helps : )
Printed in PLA with 0.2 mm layer and supports from build plate only. Use the bottom cable cover from the original model.
A phone stand with space to plug in a bottom charging cable with a charging dock for the Samsung Galaxy watch 4 in the base. Ideal for bedside table charging. Phone holder takes a phone with a fairly chunky case. The charging cable for…
All credit for the initial design goes to Printin'Monkey . The initial design was a great start, but it didn't work for me 100% and my setup. My Galaxy s24 in a rokform case was too thick so I expanded the cradle to 18mm to accommodate…
I had an old Samsung Wireleless puck I wanted to start using to spare my USB-C port the stress of being used daily. There were two or three available but all of them had significant problems and didn't suffice in my needs. This model…
Samsung Galaxy Watch 6 charging stand 3d printed to hold charging puck. The new design was developed from my Samsung 4 & 5 Stand. The new watch strap design on the watch 6 requires more clearance. The stand is slightly wider to strengthen…
Remix For a 40mm Model
Case for Samsung Galaxy S21 FE (5G). Printed with TPU 95A Update V2: Added a v2 file where I removed the bit around the volume buttons to have a better access to the buttons. V1: Support recommended for gap around volume buttons at the…
Fed up with getting the mop out every time you clean the washing machine filter? I designed and 3D-printed a small, cust. It is made in PLA in two interlocking parts. Samsung Eco Bubble WF70F5E0W4W
This is a light case meant for S24 Ultra. It is targetted to achieve the lightest frame while providing full protection for the device. Recommended to print in TPU with organic tree support. I had good results in both 0.2 and 0.12 layer…
Case for Samsung Galaxy Smart Tag 2, i want made for thin cover, so i just add 1.2mm u can still push the buttons through the covers. if u want some decorate, custom lid parts with logo or infill patterns example on photo) top/bottom…
Simple Wall Mount for Samsung TV Remote Control
The Samsung Freestyle projector uses low-profile 1/4" tripod screws to attach the stand to the body, and I lost one of mine, so made this as a replacement. It is low profile, so you can still fit the projector in the case with its…
Originally published here: Samsung Galaxy A32 5G a326 case by tato_713 - Thingiverse Thanks to Phil Nottelling , Samuel Miller and Alex Monk for testing the test version of this case. This is the test case for the Samsung A32 5G version…
Samsung Galaxy SmartTag 2 bicycle case for bottle mounting holes. I recommend 100% infill. Case height: 12 mm
Charger stand that will fit Samsung Galaxy Watch 7 (40 and 44mm). It is a remix of a stand for Apple watch. Thanks to the original creators for uploading the files for easy editiing. NOTE! I have only got access to 44mm watch, please…
This is a 2 part minimalist case that just slides on with a friction fit. This was printed with an Anycubic SLA printer.
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc]](https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg)
