Liczymy pasujące modele…
The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…
Edit 24/11/2022 I've printed the model in ASA now so it should have a better resistance to heat. However, winter as come and the temperatures are not enough to properly test it. Do not print in PLA Works best for thick sunglasses (6mm…
Intended to be FDM printed as a single piece with no supports required. Designed for continuous watch bands but should also work with any watch band as long as the band width does not exceed 24mm otherwise the lower strap will interfere…
Modèle 3D d'un support de charge pour la Samsung Galaxy Watch 4 et 4 Classic. 3D Model of charging station design for Samsung Galaxy Watch 4 and Watch 4 classic Paramètres d'impression / Print Settings Marque / Printer Brand : Artillery…
Use 4 walls + PETG. A simple clip designed for holding sunglasses or prescription glasses on a car sun visor. The clip attaches to the visor and keeps glasses easily accessible while driving, helping reduce clutter and prevent glasses…
I originally designed a replacement 3D printed knob for a Smeg oven after struggling to find a replacement. I've since added a total of 7 customisable Knob designs and 5 customisable Inserts that can be mixed and matched to create the…
TPU CASE for Samsung Galaxy S24 Ultra As I have to wait for a few weeks for my leather case to arrive, I decided to model up a TPU Case myself for my Samsung Galaxy S24 Ultra. WIP - Im currently testing it myself, but it fits nicely so…
A stand to charge your Samsung Galaxy Watch 4/5/5 Pro/6/7/Ultra with cable management! It supports all sizes for all the watches: Galaxy Watch 4 Classic 42/46mm Galaxy Watch 4 40/44mm Galaxy Watch 5 40/44mm Galaxy Watch 5 Pro 45mm Galaxy…
Chose one of 3 designs to download for the Samsung Galaxy S22, S22+ and S22 Ultra are incompatible. All 3 cases work with wireless charging, have exposed power and volume buttons, and have a lip to protect the screen. None of the variants…
Introducing my latest 3D model: a clip that attaches your sunglasses to your car's sunvisor, keeping them within easy reach. This easy-to-print accessory is designed for quick assembly and installation, adding a touch of convenience to…
I made a wall support for the Galaxy Tab A9+. As the model is quite large with a side measuring 264mm, I used my Sidewinder X1 3D printer to print it. (You can find the version for the Tab A9 (8,7") here Samsung Galaxy Tab A9 Wall Mount…
Simple case for the Samsung A54. I have included a fusion360 file. It also includes modifications to fit 2 cards (ID, credit card...) and to hold 2 coins; 1 and 2 euros in size, to unlock shopping carts. I did some modifications to…
Should be fairly straight forward to print. I've had good results without supports but you may need some just for the side cutouts. Can be easily customized by removing top and bottom layers, increasing wall count and playing with the…
The clip attaches securely to your vehicle's sun visor , providing a convenient storage location for your glasses without taking up extra space in the car. Its compact design keeps your sunglasses accessible while helping to prevent…
Simple sunglasses holder for sunvisor in car, printed with The Filament HT-PLA to prevent deformation in the sun.
S24 Ultra 3d model, high level detail, precisely and carefully made. UPDATE: model is EVEN more precise and accurate and has more available download files (STEP, OBJ and MTL). Best print settings(on anycubic kobra 2 max): infill 40%, brim…
Introducing my latest 3D model: a clip that attaches your sunglasses to your car's sunvisor, keeping them within easy reach. This easy-to-print accessory is designed for quick assembly and installation, adding a touch of convenience to…
A ceiling mount for a samsung freestyle beamer, which allows the beamer to be quickly mounted and dismounted. The beamer should easily fit in and stay there. If the model is printed with PETG, it is strong enough to hold the beamer, but…
Sunglasses holder for Tesla Model 3 or Y. Print in PETG so it can withstand high temperatures inside a car.
A remix of the (sun)glasses holder by @masimplo_77234 for the Ikea Skadis pegboard using the awesome T-Clip system by @LineArcLine . Printed with PLA, 0.2. No supports needed. I printed the t-clips with 4 perimeters and 20% infill for…
A protective case for the Samsung Galaxy A55 designed to be printed in flexible filaments like TPU. The STEP file is also provided for easy customization in the CAD program of your choice. 2024/06/21 : Updated the design to be 0.6mm…
This is a nice and simple case for the S22 Ultra, the back should just be high enough to keep the cameras from touching the table. This should not intrude with the touch screen or any of the ports. If you have trouble attaching the case,…
3 versions of Samsung Galaxy S22's case. Basic For Magsafe ring (you have to pause printing after layer 5 for 0.2 mm printing and insert metal ring - https://amzn.to/44DidrA) For credit/transport card I printed the case in TPU (90A/40D)…
wall holder: https://www.printables.com/model/1293915-sunglasses-wall-holder-for-4-glasses
I'm not sure if it can keep up with a store-bought cover in terms of quality. But it could be useful as a quick interim solution. There is a small pocket on the inside for holding a credit card or some money. Print Material: TPU / Flex…
2.5mm thick tpu phone case for a Samsung galaxy A15 with built in supports( to be cut or drilled away after printing). Case in photo was made with clear tpu with no top or bottom layers for faster printing, more flexibility, less used…
Lampshade compatible with Herrnhuter star size 1 Diameter of adapter Ø12,8 mm. Adapter need to be glued in place. Lampenschirm kompatibel mit dem Herrnhuter Stern Größe 1 Anschlussdurchmessers des Adapters Ø12,8 mm. Der Adapter muss…
This is a case I designed for my S21 Ultra. I was not happy with the few printable models I found online for the S21 Ultra. After I made 5 prototypes I discovered that TPU was super slick in the hand so I added the honeycomb texture to…
DE: Eine edle Ladestation für deine Samsung Galaxy Watch. Passend für: -Galaxy Watch5 40mm und 44mm -Galaxy Watch5 (Classic) 45mm -Galaxy Watch6 40mm und 44mm -Galaxy Watch6 (Pro) 43mm und 47mm -Galaxy Watch7 40mm und 44mm Aussparung…
Just a clean flat S10+ case. Images 2 and 3 are modifier meshes in PrusaSlicer
Samsung Galaxy Watch 4, 5, 6, 7 & 8 charging stand printed to hold charging puck. Just insert the puck into the location and run the cable along the tracks. Depending on your print settings, the puck will be a snug fit. You may have to…
Samsung Galaxy Watch 5, 6, 7 & 8 Pro charging stand3d printed to hold charging puck. Tgis is for the orginal charger from samsung. Often arftermarket chargers are a different dimension. Just insert the puck into the location. Run the…
This remix is supposed to be used with the absolutely fantastic design Honeycomb Storage Wall by RostaP Since I am using their design as a place to store my EDC and other bits and bobs, I came up with this simple design in order to store…
This is a thin, light weight case for the Samsung Galaxy Fold 7. Your printers needs to be dialed in as there are lots of overhangs, thing spindly bits. and even some straight up unsupported lips. I printed with no supports, .12 layer…
New phone, new case - a fun way of adding some colour to your S25 Ultra! I've learnt some things since the S22 Ultra Case , so this now lays flat on the front and back of the phone without touching the table and generally feels smoother…
About I designed this cover to protect my new Buds 3 Pro case from scratches. It should also work with the normal Buds 3 since they are the same size. The cover has a snug fit and lets you access the case's functions. Print settings I…
This is a simple TV remote holder that attaches to a wall or flat surface. The model is designed to use Gorilla mounting tape but it also has 2 4mm holes with a 1mm chamfer. To note there is no issue with the Gorilla tape sticking to any…
This is Samsung Galaxy A34 case model. Variants: There are 3 main variants of this model in the files below: blank cover (can be used for custom ornament) with honeycomb ornament with cam-cut pattern And each variant is also available…
Description I created these 3 boxes to house my glasses and sunglasses when camping, hiking, biking, sleeping & car trips. As you can see, there are many uses, and I use them every day. There are also a lots of other uses besides holding…
Summary Drain spout sized to 65 mm that fits a Samsung washing machine (my model number: WW70K44205W/EG). The Reason to Publish I searched across all major platforms and found various models that could work for my washing machine, but all…
Just some cool sunglasses for Lucky 13 and Mini 13. UPDATE: The Lucky13 version no longer needs to be scaled down to 95%. I've updated the model to the correct size to provide a snug fit. Added a Mini13 version.
Modified the case to include a bigger lip around the display to compensate for the extra height of a screen protector, and be deep enough to provide more protection to the cameras. I initially wanted to add a lip around the camera bump,…
This is a replacement frame for Rayban Aviator lenses (in case your original frame has been damaged). Filament (1.75mm) is used as pin for the hinge. You can use hot water or a heat gun (with caution) if you cannot insert the lenses. The…
Print this in TPU. I modeled this with help from reference images from the internet and fixed after testing on a real phone UPDATE 1: I redid the placement and shape of holes on top and bottom, according to better reference images. I…
Travel Glasses Case with Carabiner/Lanyard Hole This fully printable case is designed to protect your glasses or sunglasses when you're on-the-go to the beach, pool, or wherever else you may be going! It comes in three sizes to fit…
remix, added honeycomb on the back
Bottom is flat. Case is tested. Best printed slowly in TPU.
A friend wanted his own case for the new Samsung Galaxy A33, so I was happy to model and print it for him. After two iterations it was done. He wanted this "beam" ornament. But you can create your own . In the files you will also find the…
I redesign the model created by Callan McNamara of a case for the Samsung Galaxy A52 phone. I adjust the cut out for buttons and connectors, tightened the case and proposed an other pattern cut out in it. I tried to print it in flexible…
Print settings: No brim Print solid Print in preset orientation
Simple case for S23. Project made for TPU; print with supports.
This model is based one this model which was made for S23. Had to modify it to work with S24 like the extra microphone hole & make the button easier to press. https://www.printables.com/model/682711-samsung-galaxy-s23-tpu-slim-case
Bedside charging station for your phone, Samsung Galaxy Watch 4. I have a Galaxy S9+ but it should work with most phones. This may work with other chargers also. The Watch charging base is 33.5mm wide x 9mm deep.
Updated model Edit 4.2.2025 Added PETG model That can use also camera cover thath can be seen in gallery. I printed mine without any solid top-, bottom layer and perimereters. Just printed 3d honeycomb with 50% infill. It is very…
Samsung Galaxy S23 rugged phone case - to be printed with TPU, with 0.6mm nozzle.
Designed with air pockets around the edges to better withstand falling to the floor. When printed with the right TPU A95 material, this case is very durable and will outlast your phone.
An universal mount for Samsung Freestyle projector. It will be used for wall mount but it should work also for ceiling mount. It is shaped to avoid limiting adjustment projector position. There are two 4 milimeter holes, to secure it on…
I design this case but to help bring case together i recommend a rub like cloth rub.
This sleek wall mount is designed specifically for the Samsung TAB A8, featuring a 10.5-inch display. It prints effortlessly without the need for supports, and all components easily snap together, eliminating the need for glue or…
I printed it with PLA and a layer height 0.20 in a Bambu Lab P1S. I printed it with Bambulab PEI textured plate and with a PEO hologram-ish-thingy plate to get the effect in one of the prints. hope it helps : )
Elevate your style with the "Cat Wearing Sunglasses Keychain," a trendy accessory that combines the charm of a cute feline with the coolness of sunglasses. This eye-catching keychain is perfect for cat lovers, fashion enthusiasts, or…
Printed in PLA with 0.2 mm layer and supports from build plate only. Use the bottom cable cover from the original model.
Summary Introducing the Link&Co Sunglass Holder: a sleek 3D model designed for easy sunglasses storage in your car. Simply attach it in yout car and slide your shades in for convenient access while driving. Say goodbye to fumbling for…
A phone stand with space to plug in a bottom charging cable with a charging dock for the Samsung Galaxy watch 4 in the base. Ideal for bedside table charging. Phone holder takes a phone with a fairly chunky case. The charging cable for…
All credit for the initial design goes to Printin'Monkey . The initial design was a great start, but it didn't work for me 100% and my setup. My Galaxy s24 in a rokform case was too thick so I expanded the cradle to 18mm to accommodate…
I had an old Samsung Wireleless puck I wanted to start using to spare my USB-C port the stress of being used daily. There were two or three available but all of them had significant problems and didn't suffice in my needs. This model…
Samsung Galaxy Watch 6 charging stand 3d printed to hold charging puck. The new design was developed from my Samsung 4 & 5 Stand. The new watch strap design on the watch 6 requires more clearance. The stand is slightly wider to strengthen…
Remix For a 40mm Model
Case for Samsung Galaxy S21 FE (5G). Printed with TPU 95A Update V2: Added a v2 file where I removed the bit around the volume buttons to have a better access to the buttons. V1: Support recommended for gap around volume buttons at the…
This is a light case meant for S24 Ultra. It is targetted to achieve the lightest frame while providing full protection for the device. Recommended to print in TPU with organic tree support. I had good results in both 0.2 and 0.12 layer…
Case for Samsung Galaxy Smart Tag 2, i want made for thin cover, so i just add 1.2mm u can still push the buttons through the covers. if u want some decorate, custom lid parts with logo or infill patterns example on photo) top/bottom…
Samsung Galaxy Watch 4 - Body Case - 44 mm
Simple Wall Mount for Samsung TV Remote Control
The Samsung Freestyle projector uses low-profile 1/4" tripod screws to attach the stand to the body, and I lost one of mine, so made this as a replacement. It is low profile, so you can still fit the projector in the case with its…
Samsung Galaxy SmartTag 2 bicycle case for bottle mounting holes. I recommend 100% infill. Case height: 12 mm
Originally published here: Samsung Galaxy A32 5G a326 case by tato_713 - Thingiverse Thanks to Phil Nottelling , Samuel Miller and Alex Monk for testing the test version of this case. This is the test case for the Samsung A32 5G version…
Charger stand that will fit Samsung Galaxy Watch 7 (40 and 44mm). It is a remix of a stand for Apple watch. Thanks to the original creators for uploading the files for easy editiing. NOTE! I have only got access to 44mm watch, please…
Do NOT print this in PLA, Use a high temperature resistant material for best results and longevity! (Recommended: ABS, ASA, etc. PETG will work but will deform over time, especially in hotter climates) Best suited for thicker frame…
This is a 2 part minimalist case that just slides on with a friction fit. This was printed with an Anycubic SLA printer.
Updated 2/6/2024 for greater accuracy when printed. CAD Model of the Samsung Galaxy S24+ Plus model. The is in the middle of Samsung's flagship phone range for 2024. It has a larger screen than the S24, and a smaller screen than the S24…
— Link to my other design: Half Rim Sunglasses — Features: Designed to use Oakley Gascan lenses Printed to lens & face curvature, no need for inexact heated frame bending Print in place hinges make for simple one piece print with no frame…
I wasn't happy with any commercially-available options for this and the 3D-printable solutions I found online were iffy, so I made this design! This model is intended to be secured using 4 or 8 M5 heatset inserts, and 12mm-long bolts…
Snaps together perfectly on my printer (Might need to scale on a budget printer)
The original design was slippery in my car so I added Teeth so it can grip to my visor. Print instructions Category: Glasses Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: .2 Infill: 20% Filament:…
Originally published here: Samsung Galaxy A54 a546 case by tato_713 - Thingiverse Thanks to Johannas3D who helped me testing this case. Some of the models are designed for rigid materials and others for flexible ones. The models materials…
This is a design of a VESA adopter designed to fit Samsung Odyssey G9 screens. Adapter is reinforced with M8 Bolts. Hardware list: 2 x M8 x 70 mm - to reinforce 3D printed part with clamp force and take up the bulk of sheer force 4 x M4 x…
This is a remix of a thingiverse ( https://www.thingiverse.com/thing:3465277 ) case for the Samsung galaxy S9 plus/+ The ports in the thingiverse model didn't seem to line up correctly with my phone and the charging port was too small, so…
phone case, you can use different infills for different looks
A remix of "Galaxy Watch 5 Active Charging Stand" to fit the 47mm model of the Galaxy Watch 6 Classic. I printed it with 100% infill to give it some proper weight :)
Printable casing adapted to Samsung A23 5G. I leave you the configuration and printing files that I have used with good results. The filament I used is Flexfill 98A Fillamentum. I also leave you the stl file so you can make your own…
Thanks to Arshia who helped me testing this case. Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention to the file names. If you have any request…
Updates: Added squiggly pattern Added fuzzy skin modifier for better grip Currently it doesn't work in Bambu slicer, it leaves gaps in the model. Use Orca slicer 2.2 or PrusaSlicer 2.9.0 alpha (or above) to apply it (read more here )…
I just got my new Samsung Galaxy S26 Ultra in the mail. Just like I did last year with the S25 Ultra , I measured and modeled my own to share with the community. What makes this model special? I've included the .F3D (Autodesk Fusion) and…
This is Samsung Galaxy A35 case model. There are 4 variants of this model in the files below: blank cover blank cover with closed corners camera pattern cover camera pattern cover with closed corners Use the blank cover to create your own…
Simple case for S22. Project made for TPU; print with supports. There is also "no_holes" version. edit. I have added STP file.
Lampshade compatible with Herrnhuter star size 1 Diameter of adapter Ø12,8 mm. Adapter need to be glued in place. Lampenschirm kompatibel mit dem Herrnhuter Stern Größe 1 Anschlussdurchmessers des Adapters Ø12,8 mm. Der Adapter muss…
I couldn't find any S20 FE phone cases online and decided to make my own. This design was made do be an improvement of my previous design linked below. The case once printed should easily pop onto your phone one corner at a time (ending…
About A snap on case for the Galaxy A52s. I've uploaded versions with and without the back pattern shown in the picture. Made with OpenSCAD, I've included the .scad file in case you want to tweak it. Printing I printed on a Prusa MK3s at…
Bottom is flat. Case is tested. Best printed slowly in TPU.
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc]](https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg)
