Liczymy pasujące modele…
Happy printing, and if you like my models you can follow me for more awesomeness! I designed this sea-mine last month as a challenge for our pet crayfish Crusty. He was always climbing everything (air pipes, thermometer, plants) and is…
As the name in the Title might suggest, this is the Cabelcuff its a cable organizer/tidier to doing the same job, that a zip tie or a wire wrapped around your cable bundle would do, but quicker, reusable, 3d printed and with a really…
Introduction Recently i ordered the Prusa Core One Kit. The assembly was fun, the machine works great. Last night my door handle fell off - maybe I did not clean it properly. However, there are holes prepared in the orange metal handle as…
Purchased some 22L Samla from IKEA but they said that opposed to the 44 lits one, the 22L does not have lid fasteners. Well now it does since i thought it was a good addition to make a dry box for my filaments. Cheers. Print instructions…
NOTE: This design has been superseded by my latest remix: https://www.printables.com/model/338073-bambu-x1-ptfe-extruder-bracket-ams-error-fix I believe the one above to work better! But if the one above doesn't work for YOU, it may be…
My girlfriends tends to just lay her hair straightener on the floor to cool down and I trip over it in the middle of the night way too often, so I designed this wall mount for it. I tried many of the already existing hooks first BUT her…
The height of the female connector can be customized; the lower the height, the weaker the force of the female connector.
This was first inspired by @ ktothestank who made a simple wire straightener. I printed and tried it since I'm doing a lot of ethernet terminations, and decided to start from scratch and iterate 5 times on something that would have more…
Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…
Easier to insert into your Honeycomb Storage Wall. If the No-Tabs version is too loose, try a One-Tab version. As always, your mileage may vary. Includes: "Fasteners and parts for attaching hooks and objects" & “Parts for attaching…
Some special fasteners
I always forget to put my hair straightener away while I wait for it to cool down. Plus I wanted to have it always handy but not creating clutter. So I designed this wall mount! Hope you find it useful as well!
Heyho I really haven't found a 100% satisfactory solution yet to keep my cordless screwdriver in continuous operation. (Mine doesn't have a factory fitted locking function for this and Velcro wears out quickly) Today I designed this…
INFO Circular fastening, cylindrical gripper, variable diameter connector, jubilee clip, hose clamp or adjustable radial constriction device that will grip firmly around a cylinder, a rod or pole - typically used to secure a hose to an…
I could not find an acceptable 3D printable rivet, fastener for my Crocs' strap so I decided to make my own. Printed in PETG with 0.10mm layer height, no support. Please enable sequential printing at Print settings - Output options -…
This tool can be used to straighten standard DIP IC legs before insertion into a breadboard, PCB or protoboard. When manufactured, ICs are made with the legs slightly splayed so that they will stay in PCBs when inserted by automatic…
Wire Straightener by Qwerm This is a tool to straighten out coiled wire. Two sets of these straighteners mounted perpendicular to each other can be used to straighten out wires that have more complex bends in them. I made this tool to…
A reusable fastener without damaging the GT2/2GT (width: 6mm) timing belts.
This is a 2020 T-Slot removable locking/sliding fastener to be incorporated in other designs for attaching accessories to printers with 2020 bars. I have a Creality Ender 5 which has 2020 top and bottom rails or crossbars. UPDATE: BE…
While working on a project recently, I found that I couldn't easily find metal pins of the exact length I needed, and I didn't have the tools to cut them to size. I did, however, have plenty of PLA filament that was the right diameter!…
I made this tool after separating a couple hundred pairs and the tips of my fingers began to hurt. The end of the tool is just big enough to fit the two ends inside and the thin body of the tool allows you to roll it with ease. Along the…
Updated v1 box with v2 cantilever clips and included more sizes which can be found here --→ https://www.printables.com/model/146721-cable-management-box Cable management box to store surge protectors and tidy up cables. Now with…
4 Corner : 90° - 16 mm - 10 mm - Radius 16 mm
Fastener for lid raiser made by Tony F for the Creality K1 Max printer.
Sometimes it is hard to find the right fastener for your project, so here's a kit for you! This kit contains hex head metric bolts, nuts, washers for M5, M6, M8, M10, M12 and M16! Not only you can print some fasteners for your projects,…
Wire straightening hand tool. Two colors are shown for clarity. All press-fit parts. No supports are needed, but I did use a 3 mm brim. Also, I placed the three "rollers" close together so their brims touched. The idea is to create an…
just print and screw the pieces together to help straighten the ethernet cables and makes it easier on your hands Can be used with a heat insert or tap out the 0.2mm 1st layer and a just use an 3m nut Hardware: M3x3.6 or 4mm heat insert…
Trim Removal Tool - Snap Rivet - Fastener - Retainer NEW VERSION Resize to adjust dimensions - If you download/enjoyed this file, please leave a like - Thx
3d printable version of a snap fastener that will also connect to the real world marine snap fasteners. Category: Hobby
Printed in M3D matte Lavender PLA on my MK3s+ at .2mm on a .6mm nozzle. Attribution: Hair Dryer and Straightener Holder created by drabisko.
I needed to mount a cable in a fixed position in my DIY device but surprisingly I couldn't find any clip model for my cable thickness. This is why I decided to make a parametric model to quickly generate new cable clips for any cable size…
This is a tool to straighten your filament Print instructions The tool is for straightening filament for easy filling the filament buffer Here is how it works: (ignore the audio book in the backround :D) BOM: printed parts: 1x cover…
Inspired from Kreg True-FLEX™ Featherboards There are two versions, « TF_Featherboard_Easy_to_print.stl » is easier to print but need a little more material (~15%). « TF_Featherboard.stl » need less material, but is a little harder to…
A set of M3 fastener bins based on the Gridfinity standard. The main idea of Gridfinity is to take only what you need out of storage for a project. The bins have the labels printed in, they are separate objects in the file. The list for…
Clip Removal Tool - Snap Rivet - Fastener - Retainer REV.4 We have fully implemented the updated design, refined and cleaned up all geometries, and optimized every feature for reliable 3D printing. The result is a stronger, more…
I contructed this snap fastener / press stud to repair my wallet. After printing, simply sew on with needle and thread. Used it on my wallet for the last 2 month now - and it worked quit flawless. Print instructions I printed with: 0.6mm…
These three hole rope tensioners are great! I couldn't believe this model wasn't already on thingiverse. Use them for any rope. Tents etc. Category: Sport & Outdoors
Edit: I've reverse-engineered the model into proper STEP files if you want to edit it. Also available on OnShape under the name Balisong Mk II. The STEP files are the most up-to-date files and the ones I would recommend using. With…
I do not like to use glue for anything I may need or repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm screws and assorted nuts. Use the original strands and small parts. To unlock the handcuff, insert the…
This two part coat-hook is perfect if you don't want any visible fasteners on your walls. Use your choice of screws to attach the mount to your wall with the chamfered edges upwards, then slide the hook onto the mount. The mount comes in…
I designed these fasteners to help me connect my spare cardboard boxes and pieces together to make structures for both my kids and our bunnies! Each bracket features non-destructive teeth that help to grid the cardboard for extra grip.…
1) remove the old silicone 2) clean with, for example, isopropyl alcohol 3) apply silicone and wipe with an 8 mm squeegee in the direction of the slant (so that the silicone gets everywhere without air bubbles) 4) tear off the silicone…
After keeping sweetener packets in a small bowl for years, I decided it was about time to make something a bit more stylish. This minimalist holder will accommodate pretty much any sweetener packet: Sugar, Splenda, as well as unsweetened…
A print in place version of the Ethernet cable straightener. A second hole has been added to straight the wire pair, if desired. Printed in overture PLA Professional (PLA+) for best strength @0,20
My girlfriend hit my car.. so I remade the bumper clips that exploded when she hit it. Probably fits 9-12mm holes but I used for 9mm PRINT INSTRUCTIONS: ANY PLA WORKS ( I USED PLA BASIC) but more flexible the better pla basic is pretty…
My wife says this is the most-used tool at her pottery studio! Just hold the tool and press it into your piece to straighten any wobbly or uneven rim. Can also be used to stabilize pieces while trimming. Printing Instructions: Just print…
Simple Cable Cip. can be resized according to need
I needed some few cable fasteners to fix a cable on a kitchen cabinet. I had the choice to order a set of 100 and wait some days for delivery or to design my own and print them in less that one hour…
Clip Removal Tool - Snap Rivet - Fastener - Retainer REV.3 Resize to adjust dimensions All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our creativity. If you downloaded and enjoyed…
A honeycomb mesh to be placed on top a 120mm square axial fan that converts most of the spinning, turbulent airflow into straight, somewhat laminar airflow. I use gravity and friction fit to mount this on top of the fan for my DIY air…
A two piece print which slides together with a tapered dovetail for a snug fit. Just screw the base in place, and slide the hook into the mating dovetail. The taper should allow some forgiveness on print accuracy.
SCreen height adjusters for the Yamaha Tenere 700. STL file for left side included, mirror in your slicer for the right side. Print at 0.2 layer height, the model contains a single layer to be drilled out for the mounting holes, so no…
My wife always left her hair straightener on the floor to wait for it to cool down before storing it, which was not only a tripping hazard but a burning one. I designed this holder in such a way that you can stall with adhesive strips and…
The tinker and breadboard friendly dual inline package (DIP) has one slightly annoying feature to it. The factory bend leads don't face straight down, but at an angle that makes inserting them a hassle and usually requires straightening…
3D model of the Porsche Boxster 986 and probably 911 996 frunk trim cover fastener. Porsche part # 999 590 036 40. Most of mine were broken or missing, so I remodeled them in CAD and printed my own rather than giving more money to the…
Gridfinity boxes for M2-M5 screws, washers, and nuts
Simple cable clip with 12 mm diameter. Can be resized according to need.
This case will hold your ESP32 Cam and make sure its ventilated. There is a ventilation hole in the front, and the back is open to let the heat escape. You can also take advantage of the open back to attach a heatsink. This case does not…
Printed in ABS but any filament will do. 0.2mm layer height 5 walls, top & bottom 30% infill Supports ON for Drawer
Identical to the amazing original twist tool, but instead with an added flat bottom to allow for printing flat. Printing this model flat allows for the layers to work with the tool, rather than snapping easily from being printed upright.
TL;DR Save money, reduce waste, and avoid the hassle of searching for a lost filter fastener in your vacuum cleaner's dirt by 3D printing a replacement instead of buying a new one. Collection exercise, CAD Motivation I dropped it. Let's…
Remover Tool for Snap Rivet - Fastener - Retainer Clip Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Hand Tools
Hi, this is a remix of the snorkel made by Chris1974. I changed the wide orizzontal openning to one with 90°curve, like the oem one but without the internal conduit wich reduces the filtering surface area of the air filter to the bottom…
I just filled the screw holes since I planned to stick it with biadhesive
Category: Automotive
Tighten a rope without knots. Fixed on a wall with four screws. Designed for a rope diameter of 5mm. Use this Onshape design to modify. Rope diameter and tolerance are parameterized. A STEP file is below. Update 2024/12/04: I added a…
I'm back at replacing my local hardware store. This time with copper pipe straps for 1/2" copper pipe. Blender file included. The first one ended up being a bit tight so I made a slightly bigger one in case you don't need it so tight.
My wife has used the crap out of this for the last 5 years since the original's debut. She's graduated to regularly using three items in the bathroom now, and it was time for an added redesign. The wall mounted lock portion is not…
This is a side mounted lid holder designed for the top glass lid of the Creality K1 Max printer. It is deep enough to support the use of normal socket head cap screws, and not the low profile type that is much less common to have on hand.…
Printing Print all parts as they are orineted in the project file. Use a lower layer height for the screws and the blade for finer treads, 0.15 worked just fine for me. Use supports on the inner half of the handle and use 100% solid…
This is a printable tool for accurately bending an IC chip's leads, so that their legs are straight and perpendicular to the body of the chip. This allows for chips to be easily placed in their respective sockets. Simply slide the chip…
I made this little buckle fastener as sparepart. Print information: Printed with PETG 80% infill layer height 0,2 mm printed with organic supports
As per the title, this directs air straight toward the intended target for 120mm PC fans, mainly used in wind simulator for sim racing. Screw holes are 105mm apart, should fit most if not all 120mm PC fans with standard screw spacing.…
Universal 10mm push fastener. Mostly used in fender wells and engine bays to hold plastic molding and panels. Sizeable to your application. I used TPU and Flexible PLA for the bottom and PTEG PRO or PLA + for the top. I prefer the PLA+…
Sometimes your lamp needs to hang a bit higher. If cutting the cable is not the solution you're looking for this elegant shortener may be of help. In fact it makes a loop in the cable which is neatly covered up by a lid. The place…
30-Slot Organizer for Fasteners – optimized for MK4 / CORE One / etc. This is a compact, ergonomic organizer for 30 different fasteners — perfect for building a Prusa MK4, CORE One, etc. Made it while building the Prusa CORE One for the…
There is no news that Creality Ender 3 X axis belt is not parallel to X axis extrusion in stock setup. This addon fixes it. Also you can mount your X axis endstop 5mm to the left so your printhead will have more space to move (firmware…
I have some hanging lamps above my diner table but they're in the way when I want to fold clothes. I designed this cable shortener to be printable without supports, be elegant and to use little material. My cords are 6mm but the design…
A friend had asked me if I could make something to hold foam sheets together (non-permanent and easily removable) for cosplay. My model works like a cheap plastic sew-on-snap (but with 5 height settings). It was made to be printed…
Waist band tightener, I totally ripped this design off something i saw online.... but i was to cheap to purchase. Category: Accessories
There are two models: the loose one - in the pictures - is for normal thickness PET bottle strip, the other is for thin PET strips (on normal thickness, it creates quite some friction ). Printed in PETG, for smoothness, 0.28mm layer, 3…
If you found my things useful, you can buy me a cup of coffee: paypal.me/FirmaOnbenul Zijdeur/spatbord/achterpaneel Trim Moulding Strip Auto Fasteners Plastic Clips voor VW/GOLF/MK1/Jetta als pen gebruik je een stukje 1.75mm filament Side…
Two parts require supports. I have included them with and without designed supports. Additional parts required: quantity 2 M4 standard nuts quantity 1 socket head cap screw (40 to 50mm long) I have included a .stp file of my design like…
This bracket will help with the vibrations of the instrument panel. This will hold the instrument cluster and the navbar together. Has to varients, the default plain bracket. Or if you're like me, a happy face variant to print in a happy…
My goal is to replace all the mishmash of fastener bins with filament efficient and strong bins. This prints in just over an hour and with 34g of filament. It has 6 bins in a 1x4 footprint and fits standard labels. I love the divided vase…
Home with my son who has COVID and he needed some brass fasteners to make a model of the sun / moon / earth where they could revolve appropriately. Didn't have brass fasteners and couldn't leave the house, so I found luquad525's “Locking…
My own version of axis fasteners(bracket) for the EASYTHREED K10 3D machine.
A snap fastener for a wide range of applications. This snap fastener features multiple notches for holding materials of varying thicknesses together. One version comes with a shorter pin for the closed counter-fastener, the other with a…
So I think drawstring bags are unnecessary to use when it comes to trash bags. You throw them away anyways. But I wanted another comfort solution and stop knotting and doing things to keep the trash bag in place. Here's what I came up…
I do not like to use glue for anything I may need to repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm bolts and assorted nuts. 2026-03-23 edit : my handcuffs collection . Note : you will still need a few…
I'm a big fan of the Fast-Printing Modular Drawer System (Vase Mode) by LR3DUK https://www.printables.com/model/139570-fast-printing-modular-drawer-system-vase-mode I wanted it to be fitted on my Skådis pegboard, so I made this little…
Easily attached items without the need for screws or bolts. This push pin is created for use with a 0.25" diameter hole and has a grip length of 0.16". Just push the pin through the holes to fasten components together. To remove, gently…
By now it's a daily driver for years. The cables always got in my way till I decided to design this model. So maybe it will help you too. :) Always be careful when your Hairdryer or Straightener is still hot! On my end it works to store…
Used to flatten traditional sized trading cards that have some sort of lift, bend, or curvature to them. Features: Replaceable bolts and nuts incase they get damaged or stripped Fits traditional sized cards and card sleeves (Ultra Pro…
Various styles of Prusa CORE One door handle fasteners designed to be small, discrete, and nonintrusive: Block - Parallel edges Flared - Angled edges Round - Circular You will need: (2) M3nN nuts ***Update 2026/05/16 - after I found…
Update 08/18/25: I created another version with thinner springs. It feels better and seems like it will hold up a little better when using PLA/+. For softer materials, you may stick with older version. Also went ahead and created a wide…
(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) Wanted to design a detergent cup holder in OpenSCAD so that anyone could customize to their particular brand of detergent. The defaults in the file…
![[Print Flat] Network Cable Untwist and Straightener Tool](https://media.printables.com/media/prints/1012720/images/7697237_90664537-2b29-46d4-9706-ec9c9c18fe64_76fcd479-1c22-42cf-87d0-57d88e2eb1c5/screenshot-2024-09-19-at-80727-pm.png)
