929 modeli
Custom filament spool holder for Artillery Sidewinder X1, perfect fit with existing ball bearings.
Wydruk około 3,41 €–4,17 € nettoWstępna wycena jednego wariantu
This is another option to mount a webcam to your Artillery Sidewinder X1 or X2. The two parts are very easy to print. I also designed a more advanced version. The my other design . And another streamlined variant, more stable and not as…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
ready to print :)
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
I liked the design of the knurled knob from @rtm_43617, but the holder for the knob on the Artillery Hornet is longer as, for example the Prusa Mk3. So i remixed it and also made a version with the artillery Logo. the knob in the last…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
I created this model for the following reasons: Most mounts available are not made for use with Volcano. This design has the BL touch mount height appropriate for the additional length of the Volcano. The mounts that use the roller bolts…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
The model is self-supported if printed in the orientation shown in the photos. After printing, drill the inner hole with a 3.5mm drill bit, then tap the hole with an m4 tapping tool. After that, remove the support and add an M4x16 hex…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Installed clipper so no use for the tft screen. This is a replacement you can increase the size a bit if you want a snugger fit. Used matt black pla so it looks similar to the metal used.
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
Please leave a comment if you have any possible improvements to make to these profiles 😉👍 Print speeds? Benchy : about 45 minutes Calibration cube : about 13 minutes How import profiles? In PrusaSlicer Here is the link on how to do it:…
I have used this profile for big and small prints so its safe and tested you can see the result from this profile on my instagram page https://www.instagram.com/smotech3d/ ! The only think you need is to level your bed your correct and…
I couldn't find a nice bed template for the sidewinder x1. I hope you like it.
I tried fusing another Octillery with this fidget ring. It wasn't quite right, so I remade it. I used a bit of support on the mouth.
When I was looking for mods for my artillery sidewinder x2 I had to look for them one by one, that's why I have made this compilation of all the mods that my artillery sidewinder x2 has. The vast majority of these designs are not mine, so…
BEFORE IMPORT CONFIGS YOU NEED TO HAVE KLIPER 0.4 PRINTER ON ORCA , IF YOU DONT HAVE THIS AN ERROR WILL POP UP THAT SAY 0 CONFIG IMPORT (SEE PHOTO) I have used this profile for big and small prints so its safe and tested you can see the…
The idea with this mod is to rotate the bed 90°, so that the bed wires come out the front right side instead of the back. That way, they can travel over the case rather than behind it, allowing the printer to be pushed back closer to a…
Download ZIP, not STL Extract ZIP Open ORCASLICER FILES -> IMPORT -> CHOOSE FILE : SW X4 PLUS(or PRO) S1 - HAROVLEYGE.orca_printer For max speed (500mm/s and 10k mm/s) use fast filament settings.
This project is still in development. Final version may be finished in few months. If anyone instested to print it and build it before in test version or modify files for personal use - you can use Fusion and modify internal parts as…
Check out the detailed guide over at 3dprintbeginner.com! Edit 2021-04-14: Drill guides updated to allow improved clamping. Just thread an M3 or M4 screw through two or three of the roller wheel holes to fasten the jig securely against…
Version 2.0 is ready now! This is a more “Hornet-style” implementation with the triangles and sharp edges. Also the BLTouch probe is a separate part as not all owners use ABL. All parts are to be printed as set in .stl files. Use supports…
This is a two piece mount for a 5015 fan upgrade, for a stock Artillery Sidewinder X2. I designed this to be easier to assemble, and to use the screws that came with the SW-X2 to attach to the printer. Designed for nut Size M3-0.5mm…
Designed to be printed BIG. When I was a boy I wanted big army men, and they didn't make any. The full size G.I. Joes were far too expensive for this poor boy. It's now the future and I can ensure my nephew has huge, giant army men to…
Gcode ready to print, to test temperatur lvl of artillery. from 220 to 180 °C Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 10 Filament: everyone PLA, PLA+ Notes: just connect and print. Category: 3D Printing Tests
I needed a little cooling adjustment and the stock shroud was okay but directed the air too much into the nozzle. This is a simple design that moves the air below the nozzle and slightly around as well as not blocking the LED light. Print…
Adjust your extrusion multiplier if is to tight or to loose. Remixed from https://www.thingiverse.com/thing:3824154
Español: Este diseño está pensado para poder facilitar la organización de las pastillas que una persona se debe tomar a lo largo del día en las diferentes tomas que debe hacer. Se puede personalizar tanto en tamaño como en el número de…
Artillery Genius / Genius Pro / X1 / X2 - Media Port Covers
This is a simple file for 300x 300 mm beds to check the bed leveling.
Remix of https://www.thingiverse.com/thing:4584743 for use with 5015 cooling fan. Haven't actually printed this yet! Print at 0.2mm layer height or below for best overhangs. EDIT 2020-12-12: The first version of this duct was completely…
A modified spool holder for filaments that can be printed without support. To get a top smooth surface, I used Polymakers 'Polysmooth' white filament and polished it with the Polysher. After polishing, several days of 'curing' (=waiting)…
Remix of Atoban's Side Spool System for Sidewinder X1 updated for the Sidewinder X2. Artillery added the plastic across the top of the gantry so the X1 design doesn't fit. Additionally, the frame piece spool holder needed trimming so the…
This is a model based on Motogeepie's amazing design. (https://www.thingiverse.com/thing:3927320) After trying half a dozen of various ducts I have settled for this. I have been using this duct for the past 2 years and I am very satisfied…
This is a much more visually accurate 2D texture of the Artillery Sidewinder X1 & X2 build plate for PrusaSlicer. The included 3D model was made by alpo16000. Some might call it unnecessary, or maybe obsessive. But I have the ability and…
A quick design for a lens cover for the new Dji Integra Goggles as I could not find any. V2 is a bit wider which allows to have wide open lenses as v1 was a bit short Print in TPU. Category: R/C Vehicles
The Z-axis motor of Artillery Hornet has an rare inverted setup that helps minimize Z-wobble issues but the banding issues still present when we increase the printing speed. So, I design this holder to keep the z-axis straight and improve…
Italian: 23/04/2021 NUOVA VERSIONE! V2: Nuova tipologia di raffreddamento del motore Asse E. Struttura di fissaggio BLTouch rinforzata. Fermacavo flat ridisegnato per evitare il surriscaldamento dello stesso 06/04/2021 Aggiunta Cover con…
With this part, the Artillery Sidewinder X3 Pro can't make the nozzle cleaning without hiting the side and losing his home position. 📺 Video showing it (FR) 👉 https://youtu.be/9OkGZgRqOuI
Part cooling fan shroud for the Artillery Sidewinder X1... Wanted something small, lightweight and semi-circular. This is a remix of this https://www.thingiverse.com/thing:3923283 which is a remix based off the original Prusa mk3 design.…
Concept for Artillery shell casing fill with exploding stuff Printed PLA layers make for a poor shell Failed Ground test Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: .10mm Infill: 100 Notes: Part…
I love this duct for artillery, i dont found good fanduct on PrusaPrinter, so i give one ! Good cooling and easy mounting Print the duct with PETG or ABS or ASA ! Bracket you can use PLA ;) The creator is iPa64 on thingiverse ! :…
The parts are designed so that they can be printed without supports. The parts needed are 1x ball bearing 22x8x7 (I took some from inliner rollers) 1x screw M3x8 1x groove nut M3
Cannon stand is a remix of this model here: https://www.thingiverse.com/thing:338952 Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page…
This modification use Voron Afterburner Hotend to replace original Hornet hotend. We modified the bracket and make the Afterburner Hotend can directly mount on the Hornet hotend base. Modified Part: x_carriage_frame_left_MGN12 →…
Combinable with Artillery Sidewinder X1 X2 Parts -Beagle Camera Holder -2x Screw D3
UPDATED VER 3.1: improved some fillets to increase stiffness and increased the passage height under the conveyor and the distance from the hot parts. The print head of the Artillery Hornet has an excellent aesthetic and functional design,…
Model of a Soviet 82 mm mine on a scale of 1:1. Stabilizers are printed separately and glued.
This Camera Mount attaches your Webcam to the X Gantry! The “NebulaScrew” is needed anyway - and regarding the "NebulaMount" there are a few different versions: X4 Short (50mm “arm” length - camera gets blocked by extruder while homing)…
The original cover suffocates the extruder from air causing it to overheat overtime. It does not use the 5015 blower fan to its full capabilities due to the poor airduct design. My design allows the full hotend assembly to breathe and the…
This is an old school type of fire engine based on the Yellow Artillery Tractor Chassis model that I have released earlier. In that release itself I have explained how it is the universal platform on which various payloads can be added…
Según los manuales de ensamblado, se sugiere que el cable del extrusor vaya por detras, apoyándose en un clip que va sobre el motor izquerdo de Z. Lamentablemente esto ocasiona que el cable se doble y deteriore cuando el extrusor hace…
Artillery Hornet Extruder Cover
Monster replacement for Gloomhaven board game. Standee Count: 6 Based off the artwork work of Alexandr Elichev . Works with number bases found here: https://www.thingiverse.com/thing:2872339 Print instructions Rafts: No Supports: No…
A parametric FreeCAD model with 60mm squares over the leveling touch points, connected with 10mm strips. Also that model exported 0.31mm high for printing with thick layers on wide nozzles. This should be useful on any 300mm square bed as…
Bed Level Test zum Testen der Druckbett kalibrierung. Verwendet mit Cura. Die Datei ist erstellt für den Sidewinder X1. Ob er auch bei anderen funktioniert, kann ich nicht beurteilen, eventuell mit passender Skalierung. Sollte das…
Soportes superiores e inferiores para barras estabilizadoras de Artillery Sidewinder X2 Material necesario: 2x Barras de 12mm de diametro y 591mm 4x tuercas M3 4x Tornillos M3 con 10mm creo que sobra
For a long time I was looking for a solution to the layer lines that were present in all my prints ever since I bought the printer. As it turns out our cheap printers with their trapezoidal lead screws are horrible in this regard. I…
Artillery X1 & X2 replacement - might fit Genius (not sure) For using 5020 blower fans. I used 5015 fans and they are all very loud so had this fan already and found it much better in every way. I can run it at 40-50% and it still quiet…
I was not happy seeing how the cable on the extruder was hitting the Z-Rods and the Top-Bar while homing X and while printing near Z-Max (with the original cable clip the cable touches the top bar at around z=20cm. So it was time for my…
Steps: Raise the X axis to the top Release the timing belt Place the supports to the X axis Lower the X axis until it touches the supports, we will know that it has lowered enough when the z motors lose steps Place the timing belt again…
Este pastillero es una version simple , pensado para petg aunque en pla anda bien, se sugiere escalarlo al 150% para mayor capacidad. considera 3 tomas diarias separadas y 7 dias de la semana.
If you find this thing useful, please consider sending a tip. Thanks! https://paypal.me/cdsmakestuff Easy Upgrade for the Artillery Sidewinder X1... For the size of the bed, the leveling wheels on the ASWX1 are tiny... My CE3Pro has…
Il s'agit d'un remix de la version Prusa Mk3. J'utilise ce système sur mes Prusa et je n'ai pas trouvé d'équivalent pour la Genius, j'ai donc fait une adaptation ^^ Il s'agit de leds en 24V, branchées directement sur l'alimentation sur…
This model was designed when i found that my lateral remix with overrun of -20mm was getting tilted for the bowden cable under lateral tensión. so i made this one to try, so far works well, but i'm a little concerned on thermal…
Week Pill Box - Pastillero Semanal
Fillament Spool Holder with Fillament runout sensor attachement. This was designed for my Artillery Sidewinder X-1, but should fit a range of 3D printers. It attaches to 2020 and 2040 aluminium extrusions. Specially designed for those…
This part was designed to mount your Raspberry Pi to your Artillery printer using this excellent Pi Case with siderails designed by Sneaks: Modular Snap Together Raspberry Pi 2B/3B/3B+/4 Case w/ OLED & Fan Options No additional hardware…
Mounted with four M3 Screws Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: No Resolution: 0.2 Filament: M4P ABS-PC Category: 3D Printer Parts
Interesante y estetico gabinete para suplantar el original de la Artillery sidewinder x4 pro Mejor visualizacion del nozzle Acceso a la rueda dentada del extruso Mejor ventilacion Se compone de 3 partes que se deben pegar con cianocrilato…
Remix of the “Artillery Hornet - Air Conveyors for Cooling - New Improved Version V3” changing the mounting mechanism. The original had an overcomplicated mounting system that required more precision printing than the stock hornet is…
During a print, the idler arm of the extruder tilts and which causes uneven extrusion and under-extrusion. As a result of it, the print fails. One of the pictures is clearly visible how the arm skews to the left without the fixture…
I came across this on Tinkercad, but it contained quite a few errors in the model, misaligned bits etc. So I cleaned it up and made it more printable and now it lays flat on the print bed, the slats are properly meshed with the crate body…
I recently acquired a Genius, and I was not a fan of the spool support, I use a model for my other printers that I adapt to the printers and that I find very good, useful, resistant and functional. With the genius' plastic mount, we find…
you will need 2 MGN9 360mm rails for the x axis, 2 MGN9 480mm rails for the y axis and 6 MGN9C blocks: https://s.click.aliexpress.com/e/_DDRpCQP you will also need some m3x8mm screws: https://s.click.aliexpress.com/e/_DFWx7UR m3 t-nuts:…
Extrusion Covers for Artillery Genius
Since original part tends to break at mounting piece, I've spent some time modeling it to fit to the original space. Working fine for few weeks now. As I had no working cooling during print I decided to use PCTG for printing and it worked…
I rebuilt it because the original one was broken, I tried to update it for better ventilation and cooling. You can mount it with metric 3 inserts, I also recommend pet-g material.
This new mount repositions the Filament Runout sensor, because the original one guides the filament directly onto the extruder cable connector on the extruder. It basically is a 20mm extended part, made to be printed without support and…
The Artillery Genius Pro+Sidewinder X1 & X2 Z Axis Snap Fit Crown Cap is a remix of a part of my own model, which is quite different from the original, for the Replacement parts contest. The Z-Axis Caps are easily dressed on the top of…
29.10.2023 - updated with larger side opening
Easy to print raspberry pi camera mount for Artillery Sidewinder printers. Perfect to monitor the first layer and high prints which my other static setups didnt. Tested on a Sidewinder X2 but should work on a X1 also. Please report back…
I have seen several files that are individual pieces to cover the slots but I wanted something to completely hide the slots and the screws. I came up with this solution. Print Settings Printer: Artillery Sidewinder X1 V4 Rafts: No…
This is a new mount for the Biqu H2 on any Artillery Sidewinder or Genius that I designed and tested with https://www.youtube.com/c/SolarityTechnology . There are two versions, one for the normal hotend, the other for a volcano hotend,…
I'm building my Airbus-style home cockpit. Not a real big one (don't have the space, time or money), but more a mobile one, consisting of 3 blocks with wooden cases which can be fixed on the desk table or can stand on the floor. I found…
Hier habe ich die Filamentführung sowie den Filament Sensor so platziert, dass das Filament von einer höheren Position zugeführt werden kann. Alle benötigten Kugellager und Schrauben sind im mitgelieferten Filamenthalter enthalten. Die…
An artillery tractor is a specialized heavy-duty form of tractor unit which has its orgin in th armed forces to tow artillery pieces of varying weights and calibres. In the present day this has become a highly versatile automobile…
Designed for performance Super lightweight, optimized airflow (designed with the help of cfd simulations) Air duct based on "The Sweeper" https://www.printables.com/model/1051959-the-sweeper-flsun-t1-fan-duct Minimalistic, truss-like…
Late Middle Ages - Generic Field Artillery with crew for 1:72 wargaming Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: 0.1 Filament: Creality PLA Category: Games
I found myself in the circumstance of designing this piece with priority, since it stopped a mass production. Design based on the damaged original part with some improvements for its correct operation. The design adjusts to the pressure,…
Filament Guide Artillery Hornet
Ever since I upgraded the extruder on my Genius to a BMG + V6 hotend, I'd been rocking Chanh55's excellent cooling duct. It performs great, and my only quibble is that it's a bit chonky. This inhibits visibility a bit and requires a…
My changes made a part out of the two parts and converted it for a 5015 fan. I used M3x25 screws to attach the fan and M3x8 to attach it to the printer Print Settings Printer: Artillery Genius Rafts: Doesn't Matter Supports: Yes…
I'm not a fan of the TFT screens that ship with the Artillery printers, so I decided to replace them with slick little mini12864 displays from FYSETC and BTT (FYSETC v2.1, BTT v1.0). These displays give you a control knob which I really…
This is a remix of a x1 fan with the following improvements: -> Split duct for each side so it has an even distribution of air. -> Space for the level sensor -> And it is gripped by a screw so there is no need for glue or risk of falling…
Clamp or screw you webcam on it, clamp it below your front right printer feet. Versions V3.2 13 cm height 1 cm extra bed distance 33 degree smoothed edges V3 12 cm height 45 degree ¼" screw hole Easy to print, no supports, I used 15%…
Nueva Version: https://www.printables.com/es/model/930869-mount-microprobe-v2-for-the-artillery-x4-pro-plus Carcasa rediseñada para artillery x4 pro y plus con soporte para sensor nivel microprobe V2. Mejorado sistema de flujo de aire del…
CHECK OUT VERSION 2.0! https://www.printables.com/model/262009-artillery-hornet-dual-5015-print-head-cooling-duct I liked the stock yellow hot end cooler system, but it did lack with certain prints and to cope I could only reduce print…
I was height challenged on the shelving I mounted my side winder on (stock spool holder was too tall), and I didn't like having to use a tool to to adjust if for different spool sizes. So I designed this.... This is meant to feed in an…
When I took the filament spool out of my printer, I nedeed a support for the filament sensor to put off the original spool holder, so I designed it. The cable is guided in the bottom of the piece, getting a really clean set-up.
This is an adapter for 4 mm PTFE hose so that the filament roll does not have to stand on the frame of the Sidewinder X1. You can then use the spool holder of your choice and don't have to adjust anything. (My printer stands on a higher…
Italian: Questa modifica è nata perchè la Stampante 3D Artillery Genius non ha sull'asse Z le ruote eccentriche per poter regolare la pressione sui profili. Per poter installare la parte, ho inserito nelle immagini la descrizione…
This is a very simple design, but in conjunction with the filament modifier made by @weintdeir, it ensures that the Artillery X4 reaches its maximum height without the flex cable suffering when hitting the upper bridge. On the other hand,…
ARTILLERY X2 REVIEW AND IMPROVEMENTS SCREWS 8x M8 Nut 8x M8 Washer 2x M8 590mm Threaded rod Funda de cables: https://s.click.aliexpress.com/e/_DdXN71d FOLLOW ME: Youtube: dukedoks Instagram: @dukedoks Facebook: @dukedoks SOFTWARE: Fusion…
