81 modeli
Print it on its side to get the clips stronger, using support everywhere. Filament ASA and layer thickness 0.20mm. I used nozzle size 0.4mm. I have a separate file for matching fixture for a Ledlenser MH5 light with flex-brake-bad, an…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
Update März 2024 Ich habe noch zwei weitere Embleme von Tegernseer und Erdinger hinzugefügt. Das kleine Augustiner-Emblem hat jetzt ebenfalls einen glatten Rand. Vom kleinen Tegernseer-Emblem gibt es zudem noch eine “leere” Variante zur…
[ Note: please see notes at bottom regarding updated version] I'm currently using this part to mount my Bontrager Ion 200 RT light to a Blendr GoPro-style mount on my Trek bicycle. I initially printed this with a 0.4mm nozzle (see red…
This is a model of the tank G98_Waffentrager_E100. maybe you ned to scale it up Print Settings Printer Brand: RepRap Printer: Prusa i3 Supports: Yes Resolution: 0.1 Infill: 30% Category: Vehicles
Pull out the original holder form the rubber an screw it together with my holder. You additional need 2x M4 Locknuts and 2x M4x15 screw and also a cutted off M5x17mm screw. Print with 100% infill.
Designed for use with Selle Italia SLR Boost TM Superflow (Small) specifically. The design utilises a slip in joint for the original Trek/Bontrager RT mount that comes with the light. There is also a provision to use an M5 Bolt for…
This is a Garmin Varia saddle mount using the Bontrager Blendr saddle mount system. No hardware is needed in the model. Allen screws are needed to mount to the saddle, otherwise the Garmin mount is built in. It should be printed with…
This custom-designed ice mold is compatible with standard German beer crates (20 x 50 cl bottles) and adds a handy twist—it’s stackable for easy storage! 💡 Why It’s Great: Designed to fit 50 cl bottle crates perfectly 1.8 mm wall…
Bontrager Blendr Universal Light Mount Model W574066 Support: YES Material: PETG, ASA etc.
Update 2019 Aug 15: I was contacted by nichenke who tried to fit this on the Wahoo Elemnt and it didn't fit. He tried to modify the original design from the F3D file but it didn't update right. I tried and got the same results. I've found…
A lightweight alternative to the bulky included Bontrager Lumen bicycle handlebar light mount.
An adapter to fit the Garmin edge 530 to the blendr double stem gopro mount.
Some Trek bikes come with a snazzy little saddle clip to attach a Bontrager Flare light neatly to the saddle. This adaptor allows you to instead attach a Garmin disc mount (found elsewhere in things like out-front mounts) and attach a…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A stylized 3D figurine inspired by Will from Stranger…
A model of RhB Waffentrager Print Settings Printer Brand: RepRap Printer: Prusa i3 Rafts: Doesn't Matter Supports: Yes Resolution: Doesn't Matter Infill: 20% Category: Vehicles
There are three unique parts, each of which must be printed twice: ULock cylinder holder (2x) maintains spacing between cylinder and rack. It is intended to be relatively loose, as it only holds the cylinder in place while attaching the…
I wanted to install my Bontrager Ion 200 RT light to my gopro mount under the bike computer so I have designed this. You need M5 bolt and Bontrager Flare RT mount with threaded insert (see picture). Category: Sport & Outdoors
Clip to mount a Bontrager Flare RT (or any Flare I believe) tail light to the loop on the back of a saddle bag. It uses the mounting block that comes with the light. Pry the rubber seat post loop off of the mounting block. The block…
Simple alternative for the extremely expensive (and imho bad) frame screws from Bontrager to attach frame bags to the bikes (e.g. Trek Checkpoint) →…
Band mount for Cervelo D shaped seatpost (Caledonia, R5 etc) to fit Bontrager Flare RT rear light. Uses M4 hardware.
Designed around using an internal structural carbon spacer, this is simply an aesthetic shroud to visually integrate the bar and frame. Intended to use a carbon spacer with an outer diameter of 31.2mm. This outer shroud is intended to be…
Just made the screw flange surface thicker
Print at 10% infill. Fits Trek Bontrager bottle cage. Would love to add an o-ring and seal it further in the future. This will work for now. There are 2 parts, print both. Infill: 10% Grid Filament: Inland PLA+
I'm a big fan of the Bontrager Blendr system for mounting things to the compatible stems. You can mount a Garmin and a headlight onto your bike without a single rubber band or screw-on mount wrapped around your handlebars, resulting in a…
Mount for Garmin Varia or compatible accessories to fit a Bontrager seat with the blendr fitting spacing Edit: Added .step and .3mf files because its what I would have wanted.
Do not print this face down as shown in the preview. Print it in the orientation shown in the photos below. The .stl file in the current models folder is in the best orientation for printing without supports. This is the clip side of a…
I've printed and used Bryce's awesome Transmitr remote mount , but I just can't leave well enough alone. Considering the remote is held to the stock mount by screws, I was curious if it was possible to use those screws to install the…
Replacement for the stock clip on a Bontrager Flair bicycle light. The clip that I made to attach the light to a bag started causing the bag to sag a little from the weight of the light and it bugged me. I made this part to use the…
This is a clip for a bag that fits my Flare 2012 tail light. I tried to just use the clip from ondevas (Thingverse) model but it was a little to thick so I started a new model from scratch using his as the inspiration. The clip will fit…
Designed for mounting a Bontrager Ion 200 RT underneath a Garmin out-front mount. Category: Sport & Outdoors
Garmin Varia Horizontal Mount for Trek/Bontrager Saddles. v9 is 90 Degrees v10 has a 10* Downward Angle. .step file provided. Modification encouraged!
This is a Garmin Varia saddle mount using the Bontrager Blendr saddle mount system. No hardware is needed in the model. Allen screws are needed to mount to the saddle, otherwise the Garmin mount is built in. It should be printed with…
these mounts will work with the Flair R, Flair RT and Flair R City. there is a secure ‘click’ when the light slides into place. 28.6 - this is the model pictured on the back of the seat tubes. mount is angled up 10 degrees for better…
I wanted to use my light with the Blendr mount on my bike, but I couldn't find a stock solution that seemed suitable. The mount uses standard GoPro-style fittings, so it should be compatible with a wide range of accessories. I have this…
An adapter to fit the Garmin EDGE to the Bontrager Blendr system.
I needed a combined mount for my Wahoo Elemnt Bolt v2 and Bontrager ION 200 RT front light. I made use of the Blendr system from Bontrager to neatly combine and fit them to my stem. Some additional requirements to complete the build:…
This is remix of two model https://www.printables.com/model/857615-garmin-varia-bontrager-blendr-saddle-mount and https://www.printables.com/model/439489-magene-light-l508-saddle-bag-mount Magene mount 90 deg rotated and do'nt work…
This model is for a second generation Trek Checkpoint (2022+). I created a mount for the first generation Checkpoint here https://www.printables.com/model/160973-fender-mount-for-bontrager-flare-r-city-on-trek-ch I printed it with the…
notes: Uses M4 hardware (link) Angled to match seat tube (approx 16º) If needed, I included an stl with posts to help support the floating mount. I was having trouble with supports. 0.15 layer height 6 wall loops 15% infill gyroid PLA+
I recently posted my Transmitr remote mount for MTB handlebars (as that's where I use mine) but realized that I didn't have a version that would work with road handlebars in the common 31.8mm dimension. Like the MTB mount, this needs only…
Print this without support with the countersunk side of the screw hole on the bed. Clip to the top. Screw to the fender mount with pretty decent torque, but don't strip out the hole in the bike. This clip holds either a Bontrager Flare1…
I found myself with a couple spare freehub bodies for the Bontrager Rapid Drive hubs (commonly found on Bontrager MTB wheels) so I decided to make a holder. An initial prototype worked well but without teeth it would turn both ways and…
Die 8m Stiprute von Zite Fisching benötigt zwei verschiedene Halter um einen Trageriemen anzubringen. Beide sind hier enthalten. Zusätzlich dabei ist ein Zubehöradapter mit eingeprestem M8 Gewinde.
Some Bontrager saddles feature 2 M5 tapped holes, which is nice for mounting all sorts of things. Here is Bontrager Blendr Saddle Accessory Mount which uses these hardpoints. I have a Topeak saddle bag which I wanted to mount. Because I…
Completed mount to mount a Bontrager Flare R City Rear light to the rear left fender mounting point on a Trek Checkpoint ALR5. This mounts the light right next to the rear brake disc. This has been tested on a 2018 Checkpoint, should be…
This is the base for an adapter between Bontrager Light and another device. It uses the 1cm-uni-mount system, which consists of two holes spaced 1cm apart, allowing you to easily attach a different type of holder and thus create your own…
This hanger holds a Bontrager Ion and Flare R light set while they're charging. The hanger slides over an Amazon basics dual-USB charger (UTC2421US-BK). Printing: I printed this using supports, but it might work without them. There is a…
As my new bike is not trek, it only comes with a garmin+gopro mount for the handlebar. And since it is an carbon aero handlebar, I also cannot use the round handlebar mount comes with the light. Hence, I design the mount by referencing…
Ascher Taillight Mount for Bontrager Fender I assume this mount should fit other Bontrager Fender sizes. I encourage those interested to remix this part for any reason. IMPORTANT NOTE: You may need to adjust the print scale by 1 or 2…
Control knob for Trager Pellet Smoker. It may fit others, but check the STL to see if the dimensions align to what you need for your intended use. This knob is intentionally a tight fit. The tips of the knurled teeth on the smoker cut…
My Bontrager Ion Pro RT bike light stopped working after only a couple years. I replaced it with a cheap Lumintop B01, which is great, but the mount is awful. This model is an adapter to attach the Lumintop B01 onto the handlebar mount…
Simple adapter which snaps into the the free RIDEtime computer mount supplied with some Bontrager Blendr stems that works with K-Edge computer pucks, such as are available for Garmin and Wahoo. You'll need M3 flat head screws - the K-Edge…
Adapter to mount a light/lamp to a Routewerks - handlebar bag The adapter is a GoPro style mount which is bolted to the side of the handlebar bag. Supports are needed, best to use PETG Please let me know if you have any comments or…
Some Trek bikes come with a snazzy little saddle clip to attach a Bontrager Flare light neatly to the saddle. This adaptor allows you to instead attach a Garmin disc mount (found elsewhere in things like out-front mounts) and attach a…
Problem: The silicon band for the Duotrap S cadence sensor that is attached to the pedal crank of my road bike broke. Solution: I have TPU, why not give it a try? The replacement part has worked really well for me so far. The first…
Adapter to mount a rear bike light (having a Bontrager style mount) to a Tailfin AeroPack. Create the best fit by heating and bending the adapter a little. Take the existing rubber from the Bontrager rear light (saddle post mount) and use…
Requires a mount that came with the light and a short m5 screw to attach said mount to the print. There are two versions, adhesive being the later version that came out of frustration with the zip-tie one which I don't recommend. Zip-tie…
I do not want to clip this pump on my frame as it looks very ugly. Hence I will not be able to fix the CO2 cartridge at the end of the pump as it is too long for my saddle bag. This clip will help to organized the saddle bad better. I…
I recall seeing these hub stiffeners being sold by trek/ bontrager but now I cant find them, so I made my own. Longer on goes on hub side with disc brake. Increases stiffness by increasing hub face/ fork face contact area from 22 to 34mm.…
Using my Transmitr remote mount, I realized that the location on the bars was okay, but not perfect. Think about the location for a front derailleur or dropper post - it's under the bar. So, I went to work to create an under-bar solution…
Bontrager Ion adaptor for stock Brompton front light support. Only a M4 bolt, washer and nut needed
Bought a Trek Verve+ 4s and wasn't impressed with the taillight so made an adapter to mount a Bontrager Flare RT. Need 2 M3x8 and 1 M5x16 FHSC Screws Printed .2 layer Suggest using ASA for longevity since its exposed to UV and heat.
No matter how much I tightened the bolt for the gopro mount (at risk of stripping the insert and plastic), the light would always slip. I designed this to act as a block to prevent the light from changing its angle when knocked.
This allows one to hang a Bontrager Ion 200 RT bike light as a ceiling light in a tent, useful when bike packing and carrying additional lights would add weight. Category: Sport & Outdoors
Description: Custom 3D-printed mount designed specifically for the Bontrager RSL integrated handlebar . This low-profile adapter fits seamlessly into the central mounting interface and provides a stable, compact solution for attaching a…
I did not like affixing my rear light using the rubber strap that comes with all the generic Amazon lights, so I decided to make something a bit nicer. I recommend to print in orientation shown in the pictures using supports. Standard or…
english A small carrier for 6 spice jars (56 mm diameter) You will need 2 M3 threaded inserts (Melting into the handle), 2 M3 screws (8 to 10 mm) and 2 washers. The Fusion file is included for adjustments. Material: PLA, PETG Layer…
This is a quarter-turn mount for a Garmin Varia radar light that mounts to Trek Bontrager saddles. The Garmin socket is friction fit, the backplate does not have the "nubs" nor does it flex like original Garmin Mounts. This was done to…
This thing holds your Wildfire-S to your Bike's handle bar. Very useful when zeroing in on the general area of a geocaches location. Actually, this is custom made to fit my Bontrager mountain bike with a 31mmx35mm tube. The idea is that…
I like my cycle computer close to the middle of the handlebar. Bontrager did not provide a strap long enough to wrap around a 35mm handlebar. My design allows me to place the Node 2.1 anywhere on the 35mm section of the handlebar. Printed…
This is an adapter that will convert the Bontrager computer mount to a Garmin computer mount. I use the original computer mount as the design reference, so it should work with any bontrager computer. I will suggest to use PETG or ABS for…
This is a light mount that allows you to attach a set (front and rear) Bontrager Flarer lights to to any two prong GoPro mount. Notes for printing: -Definitely needs supports (will not print correctly without them) - Use more than 10%…
Remix of the excellent Blendr light mount by CinciJeff - functionally identical, remix just addresses some needs for supports. The back mount (for attaching to a GoPro or Blendr mount) has been slightly adjusted to no longer need…
Bontrager Elite Speedometer holder to be used in bicycle frame
A mount designed to attach Bontrager lights (like ION 200 RT , Flare RT ) to the openGrid system. The model is split into two parts to ensure proper mounting tolerance, easier printing, and a cleaner look. Simply glue the two parts…
Replacement buckle for a baby harness .
.3mf files are exported from PrusaSlic3r with settings I use for ABS at 0.2mm layer height. Supports should be set to support from build plate only. Other printers may be able to reduce the supports I include. There is a thin beam across…
Simple saddle mount for my Trek Bontrager Light
.3mf files are exported from PrusaSlic3r with settings I use for ABS at 0.2mm layer height. Supports should be set to support from build plate only. Other printers may be able to reduce the supports I include. There is a thin beam across…
notes: Uses M4 hardware (link) Angled to match seat tube (approx 16º) If needed, I included an stl with posts to help support the floating mount. I was having trouble with supports. 0.15 layer height 6 wall loops 15% infill gyroid PLA+
