P
Printables
Beetlejuice Coaster
Beetlejuice, Beetlejuice, Beetlejuice! Here's a Beetlejuice coaster I made!
Wyniki wyszukiwania: uic
Liczymy pasujące modele…
P
Printables
K1 Series Quick release magnetic tool head cover.
Note:- The rear portion that attaches to the printer is included ‘ONLY’ in this download set. If you decide to use one of my other alternate cover designs you will need the back plate from t his Version .…
P
Printables
Quick Mount Micro
I really like the Blade-Tech Tek-Mount! But it is not only expensive, it is also larger than often necessary. The Quick Mount Micro follows a similar design, but scaled down and optimized for 3D printing. All you need to do is to print…
P
Printables
Sam3DBox 3 Spoke Wheel Moza Quick Release Adapter
A friend bought @Sam3DBox's 3-Spoke Steering Wheel and needed to connect it to the Moza Racing Quick Release, so I made this adapter for it. Added a tiny detent bump to make a bit more friction, so the steering wheel has a good hold but…
P
Printables
Gridfinity Vase Quick+Hollow Base
The vase-bin + base ends up taking as much time as the full gridfinity bins on my printers. ⅔ of that is the base printing. The bases involve a lot of bridging and unnecessary filament. So I hollowed out the bases and print them upside…
P
Printables
Kawaii Halloween Friends Faceplate Set for GEN2 Decor Drawers 1x1 (Single) | Quick Swap
Quick swap faceplates designed for the GEN2 Decor Drawers by Jerrari Print settings I used (included in 3MF) 0.4mm nozzle 0.2mm layer height 15% infill (gyroid) Seam position: Back (rotate faceplate so seams are on the underside of the…
P
Printables
Gridfinity Chapstick Holder 1x1x4U (Quick Print)
1x1x4U Gridfinity Lite Bin for holding Chapstick Quick Print - No Magnet or Screw Holes Printed in 34 minutes! Holds 4 standard size chapstick tubes Printed on Ankermake M5 with PLA+ with a 0.4mm nozzle at Fast speed Print Settings: 0.3mm…
P
Printables
Linear Rail Guide Adapter For Quick Swap Kit - Snapmaker 2.0 A350
I was looking for a solution to use the linear rails SBR16 with the quick swap kit and it was also necessary that we can quickly remove the adapters.
P
Printables
Reolink RLC-823A 16-fach quick release wallmount
I designed a camera mount for the Reolink RLC-823A 16x that allows the camera to be removed quickly and without tools. The reason for this is that I mounted the camera in the window frame so that the window can be opened when needed.
P
Printables
Tesco Green Box Topeak Quick Track Adatper
Do you have a tesco crate box hanging around that is not finding any use? Do you ALSO have a bike with a topeak pannier rack on? Well do I have news for you my friend, with this nifty device you can turn your old green box into your BRAND…
P
Printables
Quick-Release Hose Wall Mount
During a transitional phase, I currently need to refill the water in our heating system quite frequently. However, the hose used for refilling must not permanently connect the domestic water supply to the heating system. To ensure…
P
Printables
Crude/Quick/Simple sandwich soldering fume extractor 140mm
Quick and simple sandwich construction for fume extractor using 140mm fan. Needed something to suck fumes away from my face while soldering and didn't like other over engineered designs that uses a lot of plastic and unnecessary…
P
Printables
Catch Cover Quick Disk Wall Mount
Wall mount for CatchCover Quick Disk system. Use for Rattle Reels, Fishing Rods, Cup holder, etc. Category: Gadgets
P
Printables
HSW Quick Nozzle Holder
Here is a simple and effective nozzle holder for the HSW system by RostaP ! Dimensions Holes are 5.5mm wide for M5 nozzles or 6.3mm for M6 nozzles Printing There is suffisant play everywhere so you don't have to scale anything. It can be…
P
Printables
Functional Model of a European style railway screw coupler (UIC Schraubenkupplung)
update: I just found an existing model in Scale I and II - obviously I previously did not find the proper search words. Still, that model is not functional (no threads) - see my " railway stuff " collection. I don't think a thread for…
P
Printables
Makita 2012NB to Cen-Tec QuickClick vacuum adaptor
This adapter easily connects the Makita 2012NB thickness planer to the Cen-Tec QuickClick vacuum system. I have uploaded 2 versions: - One with a “normal” fit. It's tight, but easily removable. - One there's a bit tighter, and not so…
P
Printables
Creality K2 plus build plate quick clamp
I print larger prints that take up most of the bed for my business and 1 of my K2 plus's bed magnet was coming up from the print warping a bit. I designed these clamps to assist on holding the bed and print. It works great no warping…
P
Printables
Filament shrinkage calibration PLA, PETG and ABS (simple and quick)
I made this filament shrinkage card so I could calculate how much to compensate during design. You print the card, and measure the steps, and then calculate the percentage the filament shrinks. The numbers on the card is the dimension the…
P
Printables
The Juicer - An extruder mod for the Lemontron
If you aren't already using the new lemonstruder , you should try using that instead of this! This is a modded extruder for the Lemontron that adds torque and helps keep the filament pushing gear from overheating and softening the…
P
Printables
Wall Mount Quick fastening system - Sistema universale di Fissaggio Rapido
Wall Mount Quick fastening system for panels and coverings - Sistema universale di Fissaggio rapido a Pressione Available in two models: Wms_1 - Wms_3 Filaments: PETG - PLA+ - ASA - ABS Hardware needed: Screws as per assembly requirements…
P
Printables
Quick Release Fastener for Pet Indoor/Outdor Exercise Pen (Print-in-Place)
Background: I have a multi-panel exercise pen made from heavy wire that looks like this: I wanted a way to secure this pen to a wall, while being quick and easy to remove the pen for cleaning or storage. This model attaches to a wall…
P
Printables
Gridfinity PicQuic Screwdriver Holder
A gridfinity holder for a picquic screwdriver. I have a sixpack plus, but I'm sure it will work with other models. It's not super refined, but it works well enough. I have included the freecad files for it, if you want to edit it.
P
Printables
Makita Quick‑Connect Cuff tool adapters
current adapters for tools: Makita dhs660 Makita Random orbital sander corded 125mm Will probalby add more when I CAD new adapters
P
Printables
Vise Pad with grooves - to fit Quick-Adjust Half-Nut Vise
This is a remixed pad to fit Quick-Adjust Half-Nut Vise by LoboCNC, it is better for holding PCBs or cylindrical parts. I made the pad a bit thicker, and have three V grooves at different heights. one on dead centre. Freecad .STEP and…
P
Printables
SawLink Universal QuickMount - Wire based pole saw conversion
SawLink Universal QuickMount offers the same remote-trigger pole-mounted chainsaw setup as ToughMount , but with a twist: all fasteners are 3D printable and designed for hand disassembly . No tools needed, no hardware store visits — just…
P
Printables
SuperMod Quick Adjust Bar Clamps
This project combines a third hand, bar clamp, and work holding tool into a cheap and versatile desktop aid for any maker. The tougher the filament, the more robust the clamps. I have done my best to model parts with layer lines in mind…
P
Printables
Quick Release System for 1/4'' Camera Adapters
Phil's original Quick Release System is awesome! Thanks for including the CAD files. I adjusted the connectors to fit threaded inserts for 1/4'' camera connectors. The mechanism just needed a few fix and release cycles to get super smooth…
P
Printables
Quick'n'dirty remix of a Schiit Modi/Magni under-desk mount
A hastily-made remix of https://www.printables.com/model/617521-schiit-modi-plus-under-desk-mount with added triangles to remove the needless overhangs and making printing without supports feasible. This is not well-made, but I'm deep…
P
Printables
Citrus juicer “Boaty”
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — A boaty-looking citrus juicer with two spouts. One with a separator for seeds and pulp and one without. The spouts…
P
Printables
Tupperware Quick Shake REPLACMENT Mixer/Blade
I lost my original mixer/blade for my 500ml Tupperware Quick Shake. Print 3+ perimeters, 100% infill. I recommend printing in PETG ; “food grade” PETG filament is even better.
P
Printables
Lumi the Owl – Cute & Quick to Print
Meet Lumi , the tiny owl full of charm and personality! Designed for a fast and easy print, Lumi is ready in just 20 minutes, making it a perfect quick project. With big, expressive eyes and a rounded, cute design, Lumi is great as a desk…
P
Printables
Koda the Koala – Small, Adorable & Quick to Print
Meet Koda, the tiny koala full of charm and ready to be your next quick print! Designed for a smooth and effortless experience, Koda prints in just 20 minutes with no supports required. Its compact and detailed design makes it a perfect…
P
Printables
Quick connect AC Intake Hose - Split
I just split the model to work on my Anycubic Kobra S1. should be fine for printers of similar size. It needs supports for the dove tail and the back side of the quick connector. No gluing needed, the quick connect will lock the two halfs…
P
Printables
Core One - Top cover quick access magnets - remix for 8x3 magnets
added a negative volume cylinder and sphere (for the chamfer) to make the opening bigger for 8x3mm magnets.
P
Printables
glove holder QUICK-CLIP v1
un portaguantes con el acceso para el modelo de clip de morral comodo y practico para trasportarlos durante periodos en montaña o otros sin necesidad de ser guardados en maletines o bolsas A glove holder with access for the backpack clip…
P
Printables
glove holder QUICK-CLIP v2
un portaguantes con el acceso para el modelo de clip de morral comodo y practico para trasportarlos durante periodos en montaña o otros sin necesidad de ser guardados en maletines o bolsas A glove holder with access for the backpack clip…
P
Printables
Quick removal mounting for 70mai Dash Cam 3 M200
The mount allows you to quickly remove the camera to prevent its battery from overheating or to protect the camera from theft. Note: I am using a brand-new camera with adhesive tape still on it; it has not been tested without the tape.…
P
Printables
Universal Quick Release Cargo System
Overview Most city bikes have the ability to have a rack in the back of the bike. These tend to be very narrow and it is common that people strap on crates or bags to make these racks usable. Almost universally these are difficult to…
P
Printables
CR18P Juice UP magnet mount, 0.12mm layer, 6 walls, 25% infill
Printed in PETG, but it'll accept PLA as well. 0.12 layer heigth, 25% infill. Add pause at layer 50 in your slicer to insert the magnets. It'll accept anything from 8x3mm to 12x5mm magnets. I have used M2x12mm screws.
P
Printables
Voron 2.4 Quick Release 270 Degree Door Hinges
Modified the original just to remove the pad for VHB if you are just mounting theors ia hardware Created a hole and placement template to make drilling mounting holes easier
P
Printables
Fanatec 50mm Quickrelease Adapter, F1, CSL, Clubsport, Podium
Adapter to mount an 50mm Quickrelease on an Fanatec Wheel The Height of 25mm fits on a Simagic QR50. Other Quickreleases should fit, but cant confirm, i made additional Spacers to change the Distance between QR and Wheel. I added an 6.5mm…
P
Printables
Quick Release Plate for Sunpak PlatinumPlus 5800D
This Sunpak PlatinumPlus 5800D Quick Plate replacement can be used to keep this old tripod kicking. I printed mine in PLA with a 25% Gyroid infill pattern. Heat ¼" - 20 Heat inserts are used to expand the longavity of the part. I used…
P
Printables
Air Hose Quick Connect Snap-On Cap
Cap for a male 1/4-inch air hose quick connector to keep dirt out of it when not in use. I put a quick connect vale on my drip sprinkler system to flush it out in the winter and use this cap to keep dirt out of the valve. The cap has…
P
Printables
Quick Printing 1/4"-20 Hex Bolt Foot or Grip Cap
I was making an extension table to a trade show display, and I needed some legs with adjustable feet to level it, so I drilled some holes, put in some threaded inserts, grabbed some ¼"-20 bolts, and printed these feet to go on the end.…
P
Printables
SDS MK5n Billet Wheel 3D printed Quick Change Tread
A re-design of quick change TPU treads specifically for the SDS MK5n. These are a ground up re-design of the Quick Change Formlabs WCP treads : The MK5n version has geometry adjustments to make them last longer, and be easier/cleaner to…
P
Printables
FFBeast Quick-Release with USB Passthrough
I added mounting holes for magnetic pogo-pin connectors . If you plan to use them, I recommend buying the versions with the wires already soldered, doing it yourself is difficult. If you only have the bare connectors, you can push the…
P
Printables
Lathe Quick Change Tool Height Jig
This model is designed to print without supports, print with the big circle side down. It is there for placing a level, or a phone with a level app if you're lazy like me.
P
Printables
Quicko T12 soldering station holder
Holder for my soldering station and couple of soldering tips.
P
Printables
DRS E-Dope Picatinny Magnetic quick release mounting with snap on protective cover
Got tired of forgetting my hold overs so invested in the DRS E-Dope card and keeping all my DOPE digitally. Design: 1) Mounts via 1913 Picatinny Rail 2) Quick Magnetic Attach / Detach (so card can be transferred to multiple pew tubes) 3)…
P
Printables
Beyblade X Quick Release Stadium Lock
Was kind of annoying popping the clips out of the stadium every time I wanna pack it up. With this, just insert and twist to lock the stadium cover. Also has a hole so you can put on a carabiner for spares. Tested on Takara Tomy BX-10 and…
P
Printables
Quickmill 5000 (old model) replacement gears
The Quickmill 5000 has hybrid/plastic gears on the high-speed/low torque side of its gearbox, that failed after 30 years in my machine. I have printed replacements in PETG, that have held up so far, but SLS Nylon gears would come very…
P
Printables
Quick Lock Dual AA Battery Travel Case
Quick Lock Dual AA Battery Travel Case Keep your spare power organized and secure with this Quick Lock Dual AA Battery Case . Designed specifically for travelers, photographers, and EDC enthusiasts, this case features a unique ruggedized…
P
Printables
Quick Lock Dual AA & AAA Battery Travel Case
Quick Lock AA & AAA Battery Travel Case Stop carrying multiple containers for different battery sizes. This Quick Lock Case is a precision-engineered storage solution that securely holds 2x AA and 2x AAA batteries in a single, compact…
P
Printables
Cam lever - quick release clamp
A M3/M4 bolt (and nut) is needed. Expected bolt dimension: Thread size: M3, M4 Recommended thread length: longer than 20mm min: 15mm with 6mm height trusted washer Bolt head diameter: up to 8.2mm Bolt head height: up to 4.0mm
P
Printables
X-Men Quicksilver Stereobelt
02-2026 UPDATE - I was missing a few files on initial upload - should be all fixed. I've had a bit of an obsession with Quicksilver's audio gear from X-Men: Days of Future Past and a friend went as Quicksilver for NYC Comic Con, so I made…
P
Printables
Juice Box Holder for Kids (500ml)
As soon as I saw the juice box holder by Allpa_112 , I knew I needed to make a version for the German juice boxes (500 ml) my son likes. We take a lot of road trips and when we'd get snacks for the road, he'd always get a juice box. When…
P
Printables
squirrel Wheelbase Quick Release
squirrel quick release, designed as a part of the squirrel base, implemented in other projects. Required hardware includes M6 bolt, M6 nuts, plethora of M5 nuts and bolts as well as M4 bolts. See the .step file for assembly instructions.…
P
Printables
Spoolholder Quickchange Remixed
Print settings used on my ASX1 Printed from PLA Layerheight 0.28 mm Infill 20% No adhesion, no support 0 Bottom Layers 80 mm/s Infill 50 mm/s Wall 1/2 roller took approx. 30 min.
P
Printables
Fortnite Slurp Juice Prop
I designed this extremely cool Fortnite Slurp Juice Prop! Perfect for decor, cosplay, or gifting to a Fortnite fan! The bottle needs to be printed using clear filament To assemble, apply a small amount of glue to the bottom of the blue…
P
Printables
Quick M2 Bolt Sorter - Organizing Your M2 Bolts Made Easy
You know the feeling. You're disassembling one of your old projects, and you're stuck measuring and sorting your M2 bolts. Well, no more. Using this handy print, you can sort and organize your M2 bolts with ease, helping you get ready for…
P
Printables
JuiceBox Abtropfschale/Drip tray
No Support needed Recommended Print Settings Material: PLA or PLA+ Nozzle: 0.4 mm Layer Height: 0.2 mm Wall Line Count: 2–3 Infill: 10–15% (Gyroid or Grid)
P
Printables
Quick & Easy LED Tube Clip: No Extra Screws Needed
Introduction: I created a clip model for flexible 20 mm LED tube lighting to have clips in different colors from those offered by manufacturers. The screws provided with the lighting do not allow direct fixing into drywall, so I used…
P
Printables
Ortlieb Quick Rack Mount - adapter
I added and extra zip tie slot and the ortlieb quick rack mount, so if your frame doesn't have the mounts and you don't want to pay for the thru axle, here is a solid solution
P
Printables
Eberlestock Thin-Molle Quick Clip
Quick clip attachment designed for eberlestock thin-molle
P
Printables
Ortlieb Quick Rack Seat Stay Adapter
This seat stay adapter is for the Ortlieb Quick Rack so that it can be attached using zip ties.
P
Printables
Quick print funnel
Just a simple quick print funnel, with a 10.5mm od neck and a 70mm basket. No fuss, no extra nonsense. I keep one in my car to top off the oil without making a mess.
P
Printables
Quick low-cost lithophane box + tutorial
This is a quick low-cost lithophane box, only 18,90gr and takes about half an hour to print, made for 100x100mm sliding lithophane. Enter https://itslitho.com to create your Lithophane, please make sure you do the following configuration:…
P
Printables
quick print bird feeder with hook
a hook that you can put birdseed mix on to feed birds during winter. here is the recipe: 1/2 cup peanut butter 1 1/2 cup birdseed 1/2 cup cornmeal 1/4 cup seeds or nuts of choice (optional) coconut oil if it doesn't stick together. mix…
P
Printables
Quick Connect with passthrough nut
Quick Connect with passthrough nut passthrough_ptfe_nut enclosed_ptfe_holder A Quick Connect nut and holder/screw that can be fixed on for example a dry box. There is no space for filament to stick out in the PTFE-plug-quick-connect…
P
Printables
SBR20 Locking Dovetail Mount (Quick-Swap System)
Description This is a robust dovetail mounting system designed specifically for SBR20 linear rail sliding blocks (SBR20UU) . I created this mechanism to allow for modular, quick-change attachments on linear motion projects without…
P
Printables
Muichiro Tokito – Mist Hashira Figurine
This fan-made 3D model is inspired by Muichiro Tokito , the Mist Hashira from Demon Slayer: Kimetsu no Yaiba . The design focuses on Muichiro’s signature flowing hair, mist-like presence, and composed stance, making it a clean and stylish…
P
Printables
Quick release clip - Velbon DV-7000N
Use high infill, as this is a structural part. Pick a material that is suitable for outdoor use, such as PETG.
P
Printables
Miniature Toy Catapult Quick Print Long Distance
Tired of only starting wars at your home? Introducing the tiny catapult! This 20 minute print allows you to arm yourself with a ready-to-go catapult, giving you the advantage on any battle field. But wait there's more, this catapult has a…
P
Printables
Multifix Liftknob Hebeknopf Hebescheibe Schnellwechselkassette Quick Change Tool Holder
Anhebehilfe für Multifix Schnellwechsel Werkzeughalter. Einfach die Stellschraube einschrauben. Gewinde M5, passend für Multifix Größe A. Empfehle mit 0,1 mm Layerhöhe zu drucken. Die Scheibe nimmt 5 mm vom Gewinde der Stellschraube weg.…
P
Printables
100ml Vape Juice Holder (FreeCAD)
A parametric vape juice holder! These are intended for 100ml and 120ml bottles, but other sizes can be accommodated by adjusting the parameters in the Freecad project. To export custom sizes/dimensions, open the Freecad project with…
P
Printables
Light-duty Arca-Swiss friction quick-release clamp
This is not very secure and will not work with Arca-Swiss plates that have anti-slide-out stops. I only designed it to be better than simply balancing my audio recorder on my cello case in case it got bumped. Print it with 3-4 walls and a…
P
Printables
Holder for pen, laser module and vinyl cutter for quick toolchange (FreeCad files included)
This is a collection of holders to be able to quickly switch functions. The quick-change holder, which these tools are designed for, is for an Creality Ender 3, but the base may be designed for other printers, too. The neat part is, that…
P
Printables
Magnetic Quick Connect Cap
A cap for the Magnetic Quick Connect that just covers the tube and helps restrict air flow back into the filament. Printed at 1mm layer height and uses the same magnets as the Magnetic Quick Connect. I use this for my polydryer boxes
P
Printables
universal belt holder, quick release 360 rotation, knife /univerzální držák na opasek,rychloupínací 360 otáčení,nůž/
univerzální držák na opasek,rychloupínací 360 otáčení,nůž /universal belt holder, quick release 360 rotation, knife
P
Printables
univerzální držák na stehno,rychloupínací 360 otáčení,nůž /universal thigh holder, quick release 360 rotation, knife
universal thigh holder, quick release 360 rotation, knife/univerzální držák na stehno,rychloupínací 360 otáčení,nůž
P
Printables
Barcelona, Montjuic, Spain - 3D Miniature
3D printable topographic miniature of Barcelona, Montjuic - 🇪🇸 Spain Capture the beauty of Barcelona, Montjuic 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates…
P
Printables
Spacer to eliminate the excessive dead zone of the FIRE button on TheQuickShot II joystick
A simple spacer that eliminates dead zone on the FIRE button of The QuickShot II joystick. If the spacer does not fit tightly on the FIRE button pin, use a small amount of glue to secure it. The photos show the FIRE button pin, the micro…
P
Printables
Horizontal Quick Clamp Mounts - Peglock
Two versions: on for medium sized clamps and the other for mini hobby clamps. I designed this to compactly store my clamps horizontally as I had space on my pegboard to place them there. I really like how they are both easily accessible…
P
Printables
Haikouichthys Sculpture
3D sculpture of a Haikouichthys. I recommend printing it at a finer layer height or using a resin printer. I sculpted the model in Zbrush, and did some clean-up and scaling in Blender.
P
Printables
Suicune
“AI-assisted Pokémon model ready to print. Great for display and collectors. Share your make!”
P
Printables
Magnetic Quick Disconnect Key Chain
I saw a few of these on here but the ones I printed released too quickly for my tastes (heavy keys). I wanted something with a little more hold, so I threw this one together. Takes 4 magnets (12x3mm magnets) that can just be superglued in…
P
Printables
Birthday Candle Holders – Quick & Easy Print, No Supports Needed
🎂 Birthday Candle Holders – Quick & Easy Print A quick and easy print for 1 or 12 candle holders , perfect for birthday cakes. This model was originally designed for 13 mm diameter candles (so not the ultra-skinny type), but it’s fully…
P
Printables
quick fit rubbish bag hanger
sometimes you need three hands to get the rubbish in the bag.... these work really well with double sided tape and will stick onto most kitchen surfaces, the clips hold the bag tightly only about two hours to print. I get far less rubbish…
P
Printables
Core One/+ Quick-Remove MMU3 Mount
An Easy Quick-Remove Mount for the MMU3 I needed the MMU3 to mount on my Core One + a little more forward than the current offerings, while leaving the lid free to open and close. This borrows from the legs from this mod, but extends them…
P
Printables
Fire Extinguisher Horizontal Wall Mount/ Quick Release
This wall mount design enables a 2kg fire extinguisher (~110mm diameter) to be mounted horizontally, ideal for fitting high up the wall of a van to minimize impact to internal space and ensure accessibility even when the van is heavily…
P
Printables
Lenovo AC Adapter OpenGrid QuickSnap mount
OpenGrid mount for Lenovo AC Power Adapter 135w (ADL135SDC3A) with quick twist release
P
Printables
Vanguard Tripod quick release replacement TPU grip
A replacement grip for the Vanguard Tripod quick release knob that fell off into the ocean when tightening my camera into the tripod. These parts, of course, are not sold by the manufacture. Print in TPU.
P
Printables
Quick release plate tightening tool
I hated having to keep coins in my pockets or carry a metal folding pliers to mount my quick release plate to my camera. This tool fixes that problem and doesn't make noises in my pockets nor scuff up other things like my phone or keys if…
P
Printables
Joby 3K Tripod Quick Release Plate
3D printable quick release plate for the Joby GorillaPod 3K triangular style quick release plate. Designed to be used with a 0.6in / 16mm diameter D-Ring screw, approximately 14mm / 0.55in long, such as these . I iterated on these to get…
P
Printables
Parametric pipe clamp with quick release, fully adjustable in SOLIDWORKS 2019
I have redrawn the model in SOLIDWORKS 2019 for those who work in it.