P
PrintablesJATMN
AMD Ryzen AM4 Tray
Just a CPU protection tray for AMD Ryzen AM4 CPU's Good for storage or shipping! Print Settings Layer height: 0.15mm - 0.20mm Support: None
- Pobrania
- 1773
- Polubienia
- 200
- Ocena
- 4,58
Wyniki wyszukiwania: yze
Liczymy pasujące modele…
P
Printablese1miran
Men In Black (MIB) Neuralyzer
I couldn't find any free models that I liked of the famous Neuralyzer memory wiping device from the Men In Black film franchise, so I made my own. It's nearly accurate in size and appearance to the on-screen version that does not have the…
- Pobrania
- 1520
- Polubienia
- 189
- Ocena
- 5
P
PrintablesThe Next Layer
BabyZen Yoyo Replacement Switch/Button
The little white release button on my son's stroller broke, so I designed this replacement. The original is ABS, so you should print in ABS or ASA. Also, for some reason, it turned out a tad bit small for me, so I might recommend scaling…
- Pobrania
- 1062
- Polubienia
- 6
- Ocena
- 5
P
PrintablesFreshPrints
Wyze Cam V3 Mount & Focus Ring Anycubic Kobra 2 Max / Kobra 2 Pro / Kobra 2 Plus
The camera mount is aligned to see the nozzle close up even when doing a nozzle wipe and calibration. This is the best current option for the Kobra 2 Series printers uses external Wyze App. Does Not work with Anycubic App. The reason this…
- Pobrania
- 1024
- Polubienia
- 157
- Ocena
- 5
P
PrintablesNorthStrider
Slide-in Wyze Cam Prusa Mount
1/5/2020 - Added 8mm channel version. Added a version to clip onto the BEAR upgrade extrusion. 9/11/2020 - Added Right Hand version per comment request. (Works for MK3S and the Mini.) I decide to do my own spin on Gabe's awesome cam…
- Pobrania
- 995
- Polubienia
- 174
- Ocena
- 4,9
P
Printablesd3rdav3
DK AMD CPU Case (AM2, AM2+, AM3, AM3+, AM4/Ryzen / Socket 754/939)
Case for a safety transport or storage of an AMD CPU. Perfect then u selling CPUs. TIP: Secure the case with a peace of tape for shipping. Hope u Enjoy
- Pobrania
- 939
- Polubienia
- 65
- Ocena
- 4,67
P
Printables3DPO
Bambu Lab P1S Wyze Cam 3/3 Pro Camera Mount
After upgrading my P1P to a P1S I found my previous mount for my WyzeCam would no longer be useful. This solution enables you to still monitor your prints without worrying about opening or closing the door depending on the material being…
- Pobrania
- 866
- Polubienia
- 206
- Ocena
- 5
P
PrintablesGabe
Wyze Cam Prusa Mount
Wyze Cam mount for the Prusa. Hope you all enjoy :) I've added .step and .f3d files so that you may edit the design to your hearts delight. (I wish this was more encouraged since .stl files are a pain to edit well.) Print instructions…
- Pobrania
- 787
- Polubienia
- 97
- Ocena
- 4,88
P
PrintablesPrinterPro
WYZE P1P Camera Mount - (Bambu Lab P1P)
This is a WYZE camera mount. It was made for the v2 camera but works with the v3 as well (shown above). This design currently only works without an enclosure mod but a pegboard and armor plate versions are in the making! Patreon (For…
- Pobrania
- 720
- Polubienia
- 147
- Ocena
- 4,8
P
PrintablesNicholas Guardino
Wyze Angled Window Mount
I had a Wyze cam facing my entry but it wasn't lined up correctly when against the glass. If I angled it away I got bad glare during the day and reflections at night. I made these mounts and they have worked well for me, 10 and 20 degree…
- Pobrania
- 666
- Polubienia
- 75
- Ocena
- 5
P
PrintablesShynd
Wyze Cam V3 Mount for Bambu Lab X1C/P1S Lid
This is a very simple mount that makes it possible to mount a Wyze Cam V3 onto the glass lid of a Bambu Lab X1C or P1S. Background Since the Bambu Handy application on my phone seems to never want to load the P1S camera view (or takes…
- Pobrania
- 573
- Polubienia
- 89
- Ocena
- 5
P
PrintablesInnesPort
Focus Knob for Wyze Cam V3
The Wyze Cam V3 is an excellent, affordable little camera to monitor your printer, but it has one fatal flaw... focus distance! The camera comes with a fixed focus that's approximately 3 feet to infinity, which makes monitoring 3D prints…
- Pobrania
- 570
- Polubienia
- 96
- Ocena
- 4,88
P
Printablesrobonxt
WYZE CAM (V3+) 20° & 45° Window Mount
Model originally created by me on Thingiverse at https://www.thingiverse.com/thing:6569380 Concept A window mount for WYZE CAM V3 and V4 (Standard and Pro models supported) Usage You will need to print: - [1x] WYZE Cam V3+ XX ° Angled…
- Pobrania
- 565
- Polubienia
- 49
- Ocena
- 5
P
Printableszuberio
Wyze Cam v3 Window Mount - Upside Down Gravity Hold
Quick and easy print (~1hr), no supports. I designed this with the mindset that the Wyze Cam v3 has a nice ledge along the bottom that's perfect for ‘locking’ the camera in place if one installs it upside down. I printed the first 1mm in…
- Pobrania
- 564
- Polubienia
- 133
- Ocena
- 5
P
Printablescbutters
Mini ITX Ryzen Case cbutters
Mini ITX Ryzen Case See Video Here: This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/55PxXyqRY3A This case will work exactly with a ASROCK Fatal1ty AB350 Gaming ITX Motherboard and the AMD Wraith Stealth…
- Pobrania
- 561
- Polubienia
- 85
- Ocena
- 5
P
PrintablesSeeSharpist
Wyze Cam V3 Mount for AnkerMake M5C
I'd been wanting a camera to remotely monitor my AnkerMake M5C remotely for a while, so I created one. I have a lot of cheap, lightweight Wyze cameras and generally like them. It sits on the top of the right side gantry and supports: -…
- Pobrania
- 549
- Polubienia
- 79
- Ocena
- 4
P
PrintablesFishninjay
Centauri Carbon Wyze v4 Cam Glass Door Camera Mount for Elegoo CC
Simple door mount for the Elegoo Centauri Carbon glass front door to hold the Wyze v4 camera. Allows remote monitoring of your print-in-progress on your phone via Wyze app, and if combined with a wifi smart outlet, eg Wyze wifi outlet,…
- Pobrania
- 539
- Polubienia
- 69
- Ocena
- 5
P
PrintablesNotQuiteApex
AMD Ryzen AM4 CPU clamshell case
Ever needed to safely keep your old AMD CPU? This is a simple, print in place case just for you! I would recommend adding a bit of tape to help keep it shut. Files include STL, STEP, and Autodesk Inventor Part file for editing and…
- Pobrania
- 534
- Polubienia
- 42
- Ocena
- 4,75
P
PrintablesAlex B
AnkerMake M5 Wyze Camera v3 (+pro) Mount
The built-in m5 camera is so low on the Z axis that it makes it very impractical for viewing initial layers. This clip allows you to put a wyze cam v3 (or v3 pro) on the left side gantry to observe your prints from a higher perspective.…
- Pobrania
- 532
- Polubienia
- 108
- Ocena
- 4,83
P
Printablesjarrah
Wyze Cam v3 Window Mount
I liked the idea of a printable window mount originally designed by TwoPunchakes, but I wanted a version that didn't require supports. I have therefore re-made this from scratch in Fusion 360, providing a design that encases the Wyze Cam…
- Pobrania
- 525
- Polubienia
- 96
- Ocena
- 5
P
PrintablesOtakuMx
Wyze/Beagle Adjustable 40mm Camera Mount v2 | Fits Most Printers
This is version 2 of my popular Wyze Cam mount. This one is adjustable so you can move it up/down - Closer/Further from the print surface. Now with Beagle + Blink Mini Support. (See Links Below) This mounts to my Neptune 3 Pro, and desk,…
- Pobrania
- 523
- Polubienia
- 71
- Ocena
- 4,6
P
PrintablesAlex Lawson
Ender 3 S1 Wyze V2 Camera Mount
Camera mount to attach a Wyze camera to your Ender 3 S1. It's still a WIP as it'll require a dab of hot glue to actually hold on to the printer. Prints easily on my Ender 3 S1, just have to flip the model 180* so it'll sit flat. No…
- Pobrania
- 513
- Polubienia
- 57
- Ocena
- 4,5
P
PrintablesSeeSharpist
Wyze Cam OG/V2 Mount for AnkerMake M5C
I'd been wanting a camera to remotely monitor my AnkerMake M5C remotely for a while, so I created one. I have a lot of cheap, lightweight Wyze cameras and generally like them. It sits on the top of the right side gantry and supports: -…
- Pobrania
- 489
- Polubienia
- 66
- Ocena
- 4
P
Printableskcarhart
Wyze Cam V3 Mount
Wyze Cam V3 Mount Includes: Base Mount (wb_v3.stl) Attach to wall with command strips/tape. Tie Mount (wb_v3_t.stl) Attach to pole or other object with zip ties/velcro straps. Print vertically with no supports.
- Pobrania
- 443
- Polubienia
- 58
- Ocena
- 4,5
P
Printablesfuchsr
Simple tripod stand for Wyze Camera (v2)
Here's a straightforward tripod stand for use with a Wyze camera. I used to use it to monitor prints on my Monoprice Voxel/Flashforge Adventurer (when I still had it). The legs are adapted from brianN's…
- Pobrania
- 428
- Polubienia
- 63
- Ocena
- 5
P
Printablesmsystems
Liter of Ryzen (Deskmini x300 Ultraslim, .9L)
For when the 1.2L 3d case isn't small enough. Important information and disclaimer (read): It only works with Deskmini x300 and the ID-Cooling IS-30. It will not be compatible with anything else. The IS-30 is not perfectly compatible with…
- Pobrania
- 411
- Polubienia
- 26
- Ocena
- 5
P
PrintablesBenKenobi
Wyze Video Doorbell v2 Secure Cover
Presenting the Wyze Doorbell V2 Cover – a minimalistic yet secure solution for enhancing your doorbell's functionality. This 3D-printable cover seamlessly integrates with the original mounting hardware, ensuring a snug fit while…
- Pobrania
- 411
- Polubienia
- 49
- Ocena
- 5
P
PrintablesJace1969
Alita - Battle Angel Hands (Original by Parallyze)
Model originally created by Parallyze over at the Mini Factory. I was having trouble uploading the large files and it kept hanging so I save it here as a 3MF. Please open in Windows 3D Builder and save to .STL or OBJ as you please : )…
- Pobrania
- 404
- Polubienia
- 30
- Ocena
- 0
P
PrintablesRyan Millar
Wyze Camera Mount for Prusa I3 MK3S+
This is a remix to an existing camera mount. The remix adjusts the camera height and spacing from the print bed for better alignment with the first layer and to allow clearance for side drawers (the side drawers I've printed are:…
- Pobrania
- 402
- Polubienia
- 80
- Ocena
- 4,79
P
PrintablesNovex
Ender 3 S1 Wyze Cam V3 Mount
Remix of these two models: Ender 3 S1 Pro Wyze Camera V3 Mount | Ender 3 S1 Corner phone mount Edited to fit the Ender 3 S1. Modified the camera retention brackets to fit the wyze cam v3 stand in multiple horizontal positions (0 degrees,…
- Pobrania
- 399
- Polubienia
- 48
- Ocena
- 4,5
P
PrintablesAiirik
Ender 3 S1 Pro Wyze Camera V3 Mount
Wyze Cam v3 mount for the Ender 3 S1 / Pro (only tested with the S1 Pro). Fits a Wyze cam v3 perfectly and at an optimal viewing angle. (Will not fit Wyze Cam v2 or older models) Mount fits the left side of the machine, can be flipped…
- Pobrania
- 378
- Polubienia
- 40
- Ocena
- 5
P
PrintablesLuca Bartoli
Babyzen Yoyo and Yoyo2 Button
Original button broke, so I redesigned it and printed in PETG. Fits perfectly and it is smoother than the original (probably due to the PETG). For better strength, print with the clips parallel to the build plate (stl and 3mf are already…
- Pobrania
- 377
- Polubienia
- 4
- Ocena
- 5
P
Printablesmostdays
Wyze Pan Cam v3 Bracket
This is a copy of the Wyze Pan Cam v3 bracket as close as I could make it. Along with the main bracket I have made an additional model to enable the ability to mount the Pan Cam v3 on the ceiling. Supports are not needed for the main…
- Pobrania
- 376
- Polubienia
- 61
- Ocena
- 5
P
PrintablesYangorang
Slide-in Wyze Cam V3 Prusa Mk3 Mount
Same as mount from Artem but tweaked the holder size a bit to better fit the Wyze Cam V3 which has a slightly smaller but taller base. The existing channel for the cable pass through is a bit tighter with the V3 due to there now being the…
- Pobrania
- 349
- Polubienia
- 51
- Ocena
- 5
P
PrintablesDeltaken
Bird feeder camera (Wyze, Blink)
A bird feeder to spy on the birds in your garden. Compatible with Blink and Wyze cameras. 2 parts, the feeder and the roof. Both can be printed without supports. The roof snaps on the feeder to hold the roof in place. v2: Bigger holes for…
- Pobrania
- 339
- Polubienia
- 62
- Ocena
- 4
P
PrintablesTrackerct
Wyze Cam V3 Rain House
Searching online for a weather-proof cover for the new Wyze Cam V3 produced nothing. So I designed my own. It snaps onto the cam without tape or glue and prints without supports.
- Pobrania
- 339
- Polubienia
- 69
- Ocena
- 5
P
PrintablesTwoPuncakes
Wyze Cam V3 Window Mount w/ Gorilla Tape
While you're waiting to print this, I'd suggest preparing the double-sided tape: Cut a length of 2 inches (or 5.5 cm) of Gorilla Double-Sided Tape , then cut it in half lengthwise. Remixed from: Wyze V3 Camera Window Mount by the_holocron…
- Pobrania
- 319
- Polubienia
- 80
- Ocena
- 5
P
PrintablesFrankincell
Wyze cam mount for Prusa Mini
This is a remix of the excellent "Wyze Cam Prusa Mount" by Gabe. I just mirrored it to use it on the left side of the Prusa mini and removed some of the material to make it lighter. Print instructions Printed as oriented in the 3mf file.
- Pobrania
- 309
- Polubienia
- 45
- Ocena
- 4,92
P
Printablesnullgel
Wyze Cam Corner Shelf
NOTE: I made a new corner mount that I think is better: https://www.thingiverse.com/thing:3412469 A tiny shelf for a tiny camera. This is a perfectly-sized corner shelf for the Wyze Cam security camera. It has a notch to pass the USB…
- Pobrania
- 303
- Polubienia
- 62
- Ocena
- 4,6
P
PrintablesTaptic Digital
WyzeHouse - Wyze Cam V3 Birdhouse
Introducing the WyzeHouse! This fully 3D printable birdhouse will provide your feathered friends with a luxuriously safe nesting site that you can monitor remotely. This enormous suburban home is split into multiple parts, and will fill…
- Pobrania
- 298
- Polubienia
- 87
- Ocena
- 5
P
Printablespbouna321
Low Profile Wyze Cam Pan V3 Ceiling Mount.
5/26/2024 Updated the file as I am slightly better at Freecad now. Made both the base, and adapter ring thinner. Made the tolerance on the dovetails slightly better for printing faster with a .6mm nozzle at .3mm layer height. Now can…
- Pobrania
- 298
- Polubienia
- 47
- Ocena
- 4
P
Printablesjericho
P1P and P1S Screen cover Wyze Camera Mounts
While I liked and created several blue_stik mount options for Wyze cameras (see here and here and here ) I kept thinking there should be a better and more low profile way to mount the camera on top of the printer. Adding the AMS really…
- Pobrania
- 297
- Polubienia
- 65
- Ocena
- 4,5
P
Printablesrob garcia
Wyze Pan v3 wall mount +
I took the model created by Max Johnson and adjusted it slightly by adding a recessed hole for the camera mounting screw. I then create a top shield to keep rain and mainly snow off the camera. Then Wyze released the OG and I wanted to…
- Pobrania
- 294
- Polubienia
- 32
- Ocena
- 5
P
Printablesknives127
Arrow FOC Analyzer
little gizmo to find the balance point of your arrows and calculate the FOC. Diameter 5mm and 7mm to grab common arrow shafts Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2…
- Pobrania
- 281
- Polubienia
- 42
- Ocena
- 5
P
PrintablesCameron Burdette
Flashforge Adventurer 5m - Wyze Cam V2 Mount
Wyze Cam V2 Mount for Flashforge Adventurer 5m. This will work unless you install the door for the enclosure.
- Pobrania
- 273
- Polubienia
- 33
- Ocena
- 0
P
PrintablesCrimson Caboose
Wyze Camera Holder (No Enclosure) for Flashforge Adventurer 5M (AD5M)
Wyze Camera holder for Flashforge AD5M without an enclosure.
- Pobrania
- 271
- Polubienia
- 41
- Ocena
- 5
P
PrintablesThatSilkyGoose
Wyze Video Doorbell Pro Adapter Plate
This is a copy of the mounting plate included in the box with the Video Doorbell Pro! I used it to create a plate to fit in my existing intercom system, replacing the old broken doorbell, but I wanted to save y'all the time of creating…
- Pobrania
- 271
- Polubienia
- 16
- Ocena
- 0
P
PrintablesWCTT
Wyze Cam V3 Ender 3 Mount
Remixed this to work with the Wyze Cam V3. The other remix for the V3 was a little higher than I like, so this should sit lower for the camera to be more level with the bed. Category: Camera
- Pobrania
- 270
- Polubienia
- 25
- Ocena
- 4,5
P
Printables3D Sourcerer
SUMO/DELACK Enclosure Wyze CAM V3/V4 Camera Mount
CLICK HERE FOR THE ASSEMBLY GUIDE
- Pobrania
- 263
- Polubienia
- 22
- Ocena
- 4,67
P
PrintablesMidvale
Wyze Camera
This version doesn't need hardware to use. Print 100 percent infill, with supports. May need to enlarge mounting holes to suit. https://wyze.com/ Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Yes Supports: Yes…
- Pobrania
- 256
- Polubienia
- 70
- Ocena
- 5
P
Printablesiamdrew
Dr. Gusman Logic Analyzer Case
Design for the v6.0+ PCB design by Dr. Gusman Does not support board chaining. I would suggest printing the bottom piece with the open side up and the top piece with the open side down. If you have a textured bed, I also would suggest a 1…
- Pobrania
- 253
- Polubienia
- 9
- Ocena
- 0
P
PrintablesToWcH
Wyze doorbell wall mount
This is a replacement wall mount for the wyze doorbell.
- Pobrania
- 253
- Polubienia
- 21
- Ocena
- 5
P
PrintablesDr Taco
Wyze Cam Pan v3 corner mount for fence post or anything that is 90.
I created this model to mount my cam pan v3 to watch over my backyard from the corner post of my deck. You can use this model anywhere you have an outside corner that is 90 or print with TPU or PETG and bend it, if its an abnormal corner.…
- Pobrania
- 239
- Polubienia
- 44
- Ocena
- 5
P
PrintablesTruepaint
Bambu A1/A1 Mini, Wyze Cam V3 Mount (No hardware needed)
Not happy with the camera on your A1 or A1 Mini? Got a spare Wyze Cam V3 laying around? Give this print a try! This is very simple design that uses very little filament and can be printed in very little time, this adds an actual live…
- Pobrania
- 235
- Polubienia
- 52
- Ocena
- 5
P
PrintablesMRedmon
Parametric Bird Feeder For Wyze Cam and Similar
Sample video: My FB feed started to show me all sorts of bird feeders including some commercial options that had built in cameras. I decided I had to create my own version. It's all parametric so you can modify any of the sizes using…
- Pobrania
- 232
- Polubienia
- 52
- Ocena
- 0
P
PrintablesJeffrey Smith
Bambu Lab P1P / P1S Top Glass Riser with mount for WyzeCAM2
Top glass riser that doesn't take 22 hours to print and I can control the airflow through the riser. Simple, clean, easy to print and suited my needs. Props to the original design.
- Pobrania
- 232
- Polubienia
- 55
- Ocena
- 5
P
PrintablesJoe
C-Clamp & Wyze V2 Camera stand
I originally designed this only to mount my Wyze cam, but I decided to break out the C-clamp for more general purpose use. Before you glue the Plate to the top of the Screw, you must first thread on the Screw & Nut onto the Clamp Body.
- Pobrania
- 229
- Polubienia
- 24
- Ocena
- 0
P
Printablesnullgel
Wyze Cam Corner Bracket
This is a minimalist, inside-corner mount for a Wyze Cam. Simply screw it into the wall and then slide the base of the camera into the slot. There is a space behind the mount to run the cable so that it hugs the corner of the walls as…
- Pobrania
- 226
- Polubienia
- 40
- Ocena
- 5
P
PrintablesLuiz Eduardo Carneiro
Reinforced Wyze Cam OG front glass mount for Bambu P1S/X1C
2026-02-12 : Check the size of your OG Cam, if it's 52.2x52.2 like @Negarpls_3674399 mentioned in the comment section, this version might not support your camera. I released the .STEP file, though, if you make the change, share a remix,…
- Pobrania
- 225
- Polubienia
- 28
- Ocena
- 5
P
PrintablesDerpFishStuff
Wyze Cam v2 Glass Mount - Pinch Hold
A very quick and easy print that can be stuck to a glass to hold your Wyze Cam v2 against the glass. Spaces in print for 3m sticky tape. Camera wedges into the square hole. Scale up or down as needed to make fit firmer or looser. Based on…
- Pobrania
- 207
- Polubienia
- 32
- Ocena
- 5
P
PrintablesTek
Wyze Cam v3 mount for Flashforge Adventurer 5M
Liked the Wyze cam mount for the A5M, but wanted to be able to easily open and close the enclosure door. Cobbled some pieces together to make the camera platform both moveable and removable. This is a garbage model but it is functional.…
- Pobrania
- 207
- Polubienia
- 37
- Ocena
- 5
P
PrintablesDallas Estep
Wyze Cam Pan Mount
This mount helps attach your wyze cam pan anywhere!
- Pobrania
- 202
- Polubienia
- 36
- Ocena
- 5
P
PrintablesPostalshark
Wyze V2 V3 Window Mount
This is an angled window box mount for the Wyze V2 and V3 cameras. I based it off another mount. I used this as a starting point. https://www.thingiverse.com/thing:4885411 This is a friction mount design that allows for angling up or…
- Pobrania
- 202
- Polubienia
- 21
- Ocena
- 4
P
PrintablesChurky
Wyze Cam V4 mount for Elegoo Centauri Carbon V2
The camera inside the printer is almost useless, focus is lacking and light causes the background to over darken and you can not see anything. I created this mount for my Wyze Cam v4, I think it should also fit a v3, but I don't have a v3…
- Pobrania
- 198
- Polubienia
- 55
- Ocena
- 4,75
P
PrintablesJerrari
Wyze Cam V3 Enclosure Mount
Wyze Cam V3 Lack Mount So you like watching you printer work eh, making sure it's making prints and not piles of spaghetti? Well why not slap a security camera to your enclosure to make sure nothing fishy happens the moment you step away?…
- Pobrania
- 198
- Polubienia
- 105
- Ocena
- 5
P
PrintablesVedanshG
Wyze Cam V2 Ender 3 Pro Mount
Wyze Cam mount for Ender 3 Pro. I decided to remix "rdprosser's" design and made the pieces slightly easier to print by removing the cable clips. The pieces are calibrated to my Ender 3 Pro meaning that depending on the accuracy of your…
- Pobrania
- 194
- Polubienia
- 43
- Ocena
- 0
P
Printablesbdahlem
Wyze Cam OG Bambu P1S X1C Lid Mount
You can change the angle by adjusting the parameter in the .f3d file. This model has the camera angled at 70°. Printed in PLA, no support.
- Pobrania
- 192
- Polubienia
- 24
- Ocena
- 0
P
Printablesruredi87
Ryzen thermal paste cover
Ryzen processor perfect amount of thermal paste cap. When you put cooler on the cpu thermal paste thickness will be 0.1mm Category: 3D Printing
- Pobrania
- 191
- Polubienia
- 22
- Ocena
- 0
P
PrintablesChad Birchem
WYZE CAM V3 Mount - Droid
Version 1 - I will likely keep upgrading this and releasing new versions as i tinker with it. IMPORTANT - Make sure you orient in the 3d model in your slicer so its laying on its back, this will prevent the need to use any supports!! Best…
- Pobrania
- 191
- Polubienia
- 62
- Ocena
- 5
P
Printablestheory
Wyze Cam V3 Bird Feeder
Modelled this to fit a Wyze Cam V3 as that's the ecosystem I use around the house. Has a hole in the back to fill it up when it gets empty. Uses 9 m3 Threaded Heatset Inserts and m3x10 screws.
- Pobrania
- 187
- Polubienia
- 46
- Ocena
- 5
P
PrintablesAltirix
Gigabyte A520M DS3H IO Shield AM4 Ryzen
replacement io shield for A520M DS3H Category: Replacement Parts
- Pobrania
- 182
- Polubienia
- 9
- Ocena
- 0
P
Printablesreoost
Wyze 5070 Wall Mount
Mounts to the wall using 4 "Poster Strip" sized command strips on each bracket and an optional nail through each mount. To mount you will need 2 Printed Mounts 8 "Poster Strip" Command Strips 1 M3 screw of at least 16mm 2 M3 Nuts 1 M3…
- Pobrania
- 182
- Polubienia
- 25
- Ocena
- 5
P
Printablesbinarypickle
Wyze Cam Wall Mounts
Created some sturdy mounts for my wyze cams. Fits my v2s nicely, don't know how it will handle v1 or v3.
- Pobrania
- 181
- Polubienia
- 30
- Ocena
- 5
P
PrintablesOak Park Creation Lab
Tello Ryze Drone Payload System
I took this original idea for a ping pong ball carrier and remodeled it to be easier to modular and easier to print. Print the clip and attach to the Tello. Then attach either the box or the bowl. Use Tello's 8D flip capability to drop…
- Pobrania
- 179
- Polubienia
- 16
- Ocena
- 0
P
Printablesurbncarnivor
Wyze Cam V3 Extension Mount for Ankermake M5C
slides into the original mount, just to get a bit lower to see a bit more of the print from the camera
- Pobrania
- 179
- Polubienia
- 26
- Ocena
- 5
P
Printablesdylanbrookes104
1:1 Ryzen 5 5600X CPU
1:1 scale CPU 100% infill recommended no support material ( unless you want to add the 1331 pins on the under side ;P ) bar code, serial, etc. are genuine and a pain in the butt to create
- Pobrania
- 176
- Polubienia
- 17
- Ocena
- 0
P
Printablesfuchsr
Wyze Cam Prusa Mount with Slide-in Connector
This is a remix of With_Maltodextrin's remix of Gabe's camera mount. I added the slide-in connector for the Wyze cam I developed for my other printers (eg…
- Pobrania
- 174
- Polubienia
- 22
- Ocena
- 4,88
P
PrintablesRod
IKEA Skadis Wyze Cam Bracket
Simple bracket to mount a Wyzecam V2 or V3 to IKEA's Skadis pegboard. Example of using the IKEA Skadis Fusion 360 models: https://www.prusaprinters.org/prints/118225-ikea-skadis-fusion-360-models . Printing Supports: Yes, painted on the…
- Pobrania
- 172
- Polubienia
- 39
- Ocena
- 0
P
Printablesmakeshift-meatballs
Stand for Wyze Cam Pan
I designed this simple stand for my Wyze Cam Pan to elevate and stabilize it for use monitoring my 3D printer. I printed using a 0.28mm layer height at 50mm/s with 10% infill and 2 perimeters on my Ender 3 v2. No special settings are…
- Pobrania
- 171
- Polubienia
- 33
- Ocena
- 5
P
Printableshawknum001
Prusa Wyze Camera Mount
Wyze camera mounting bracket that attaches to the left z-axis motor. Works with Prusa MK3 and MK4. Attaches with a single M3 screw.
- Pobrania
- 169
- Polubienia
- 32
- Ocena
- 5
P
Printablesspumoni
Wyze Cam v3, Wyze Cam v3Pro, Wyze Cam v4 Mounts
Note: The 9 Hour print time is because all mounts are being provided on one plate. If you want one specific mount, download the appropriate STL File single Camera Wall Mount Double Camera Wall mount Single Camera Soffit Mount Double…
- Pobrania
- 167
- Polubienia
- 25
- Ocena
- 0
P
PrintablesJon R
Wyze Cam V3 Pro replacement swivel
Replacement part for the Wyze V3 pro. Might work for other models Wyze cams This is not intended to be a exact replacement for the original, but it is functionally the same.
- Pobrania
- 166
- Polubienia
- 13
- Ocena
- 5
P
PrintablesBluecornNM
Wyze cam monitor shelf
I've been working from home since 3/17. The company I work for makes a hardware video platform that I've been using for most things but I now need to have a webcam for my Mac too. USB cameras are currently out of stock most places, and…
- Pobrania
- 163
- Polubienia
- 22
- Ocena
- 5
P
PrintablesFishninjay
Wyze V4 Smart WiFi Camera Mount Hanger Bracket for Elegoo Centauri Carbon
Hanging bracket for the Wyze smart camera, v4 model. This allows the glass front door to fully close shut. The top edge of the bracket fits inside front edge of the Centauri Carbon, either with top glass, or a printed riser. When hanger…
- Pobrania
- 162
- Polubienia
- 24
- Ocena
- 5
P
PrintablesWith_Maltodextrin
Wyze Cam Prusa Mount - 25mm taller
User Gabe's excellent original design seemed a little short, so I increased the height of the platform 25mm using Blender. The added height makes it a little easier to see items/edges of prints on the closest part of the print bed. It…
- Pobrania
- 162
- Polubienia
- 10
- Ocena
- 5
P
PrintablesTruepaint
Bambu A1/A1 Mini Wyze Cam V1/V2 Mount (No hardware needed)
Not happy with the camera on your A1 or A1 mini? Got a spare Wyze Cam V1 or V2 laying around? Give this print a try! This is very simple design that uses very little filament and can be printed in very little time, this adds an actual…
- Pobrania
- 158
- Polubienia
- 37
- Ocena
- 5
P
PrintablesTecno Friki
PC CAJA ITX CON VENTANA LATERAL DISIPADOR AMD WRITH PRISM MINI TORRE LOGO RYZEN COMPUTER CASE
Quería montar un Equipo Informático de Productividad en mi zona de estudio ( para ofimática y navegación Web) que a la vez que fuera eficiente energéticamente tuviera suficiente potencia y no se quede corto a medio plazo, además debía…
- Pobrania
- 155
- Polubienia
- 26
- Ocena
- 0
P
PrintablesFourD_Tiger
LItter Robot 4 Wyze Mount Adapter
Not much to say here. This is for someone who saw the original model, but wanted to use a Wyze Cam instead of an Eufy. This is a delicate part with a very small bed contact area. I suggest using organic supports and a brim. I used black…
- Pobrania
- 150
- Polubienia
- 12
- Ocena
- 5
P
Printables3DPO
Bambu P1P Wyze Cam 3 Mount
I noticed there were no mounts for a Wyze Cam 3 for the P1P that worked with the Armor Mod plate, so I made one that should work with any. This is my first foray into 3D modeling, so if there are any issues please let me know or feel free…
- Pobrania
- 150
- Polubienia
- 18
- Ocena
- 5
P
PrintablesClink Grove
Wyze Camera Mount: Prusa XL series Remix
I used Surfalex2000 's awesome camera mount with the t-nut part to secure the camera, and combined it with my Wyze cam mount to make a new fixture that should be compatible with multi-head XL printers! This is also (mostly) compatible…
- Pobrania
- 150
- Polubienia
- 24
- Ocena
- 5
P
PrintablesDavid Nunez
Flashforge ADX5 Wyze V4 Mount
Remixed from "Flashforge AD5X Wyze cam adapter" by @jsmayda_3414182
- Pobrania
- 149
- Polubienia
- 27
- Ocena
- 5
P
PrintablesWCTT
Prusa MK3S Wyze Cam V2/V3 Mount (Easy Print)
This is another Wyze Cam mount for my V2 and V3 cameras to hook onto the Prusa MK3S printer I have. This should be an easier to print model.. printed on it's side. You can mirror it if you want in your slicer.
- Pobrania
- 145
- Polubienia
- 16
- Ocena
- 5
P
Printablesohheyitspaul
Wyze Video Doorbell v2 30/45/60/90 Degree Wedge for Secure Cover
Needed to use the 30 degree wedge for my installation, but wanted to also use the security cover design. I remixed the bottom mounting frame with so that it mounts 30 degrees offset. I use 3mm heat inserts for the two small holes on the…
- Pobrania
- 143
- Polubienia
- 11
- Ocena
- 5
P
PrintablesChurky
Wyze Cam V4 mount for Elegoo Centauri Carbon
The camera inside the printer is almost useless, focus is lacking and light causes the background to over darken and you can not see anything. I created this mount for my Wyze Cam v4, I think it should also fit a v3, but I don't have a v3…
- Pobrania
- 142
- Polubienia
- 31
- Ocena
- 5
P
Printableskfbest
Wyze Camera Window Mount
Printed the excellent Wyze tripod mount by fuchsr, but with where I wanted the camera, it kept getting in the way. Converted the camera mount part to be window mountable. I ended up using 3M Command strips to attach it to the door of my…
- Pobrania
- 142
- Polubienia
- 20
- Ocena
- 5
P
Printablesroblpetty
Wyze Cam v3 privacy cover
Really simple cover for camera to ensure privacy without needed to move camera or unplug. just used foam mounting tape to attached to the top of the camera Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
- Pobrania
- 142
- Polubienia
- 22
- Ocena
- 5
P
PrintablesGogoGooch
Centauri Carbon Wyze v2 Cam Glass Door Camera Mount for Elegoo Centauri Carbon
This remix of the v4 is designed to hold the old v2 Wyze Cam. I made the mounting lip thinner so the door would fully close as well. Printed on Elegoo Centauri Carbon with Elegoo White Rapid PETG0 @ .20mm Strength @Elegoo CC 0.4 nozzle…
- Pobrania
- 141
- Polubienia
- 18
- Ocena
- 5
P
PrintablesIpabloI
Wyze Cam OG 3D Printer Mount
Slides onto siding. I used a T nut to hold it in place so it doesn't move inward, the other end is held in place by the original plastic cover. I doubt the mount will move much though. Printed with supports for the mounting pins. 20%…
- Pobrania
- 141
- Polubienia
- 11
- Ocena
- 5