1 / 5
Small Conduit Puller Tool
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Small Conduit Puller Tool - for pulling small wire through corrugated split loom
Was designed to be used to pull fiber optic cable through 3/8 tubing, but could be used for other things.
Print settings:
- 0.4mm nozzle
- 0.2mm layer height
- 3 walls
- infill doesn't matter
- After printing, snip off the supports
Put end of cable through the inner sleeve and rotate the inner sleeve.
Put outer sleeve “horn” into tubing and gently pull; the cable will be fed into the tubing.