1 / 3
Impact printhead Remix for Creality Ender 3 / NEO / PRO (not E3 V2 V3) Printhead HGX-Lite with mount for CR-touch — image 1
1 / 3

Impact printhead Remix for Creality Ender 3 / NEO / PRO (not E3 V2 V3) Printhead HGX-Lite with mount for CR-touch

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix Printhead Kirill Plasma

Rating
0 / 5
Likes
7
Downloads
31
Makes
0
Views
482
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Описание на русском ниже:
This printhead based on project of Kirill Plasma https://www.printables.com/model/922675-impact-printhead-for-ender-3-tevo-tornado-lomacho 
Target of project:
I wanted to avoid of need very accurate print of feeder лoMacho. My first print was a few bad and BMG spare parts have worn off due to poor alignment of the feed gears.

Differences from the original

Disclaimer: For the Ender 3 NEO and other Ender , you need to purchase a carriage that is the same as the Ender 3
CR-Touch offset:
y_offset: 10.1
x_offset: 25.2
Extruder:
rotation_distance (starting value) - 5.65. Be sure to calibrate the steps after installation!

  • The body became slightly larger to allow for HGX Lite installation.

  • The carriage mounting holes were moved lower to allow for HGX Lite installation.

  • Added a CR Touch mounting location. (Implemented as a modular mounting platform so that those who want can design it for their own types of sensors.)

  • The length of the PTFE tube between the heatsink and the feeder has changed. (I will add the exact length when I disassemble it.)

  • Added 2 holes for M3 heat-set inserts and the need for 2 M3*6 screws to attach the CR-Touch bracket holder.

  • Changed the cable mounting bar - made it longer to allow securing the wiring properly and avoid friction on the feeder gears.

BOM:

  • M3*5 heat-set inserts - 12 pcs.

  • E3D V6/Volcano hotend with heatsink - 1 pc.

  • 40x40x10(20) heatsink cooling fan - 1 pc.

  • NEMA14 36mm + HGX-Lite + screws included in the kit for attaching them together.

  • 5015 blower fan for part cooling (preferably GDSTime DualBall) - 1 pc.

  • M3x6 screw - 4 pcs. (base to carriage + CR-touch bracket to base)

  • M3x8 screw - 4 pcs. (direct drive to base + base to carriage)

  • M3x10 screw - 1 pc. (duct to base)

  • M3x16 screw - 2 pcs. (base cover)

  • M3x18 screw - 2 pcs. (for 4010) optional

  • M3x20 screw - 1 pc. (for 5015)

  • M3x30 screw - 2 pcs. (for 4020) optional

  • 3-4 zip ties for securing wiring

  • ~80mm PTFE tube

If you liked it and want to give support:

Русский язык

Эта печатающая голова создана по проекту Кирилла Плазмы https://www.printables.com/model/922675-impact-printhead-for-ender-3-tevo-tornado-lomacho 
Цель проекта:
Я хотел избежать необходимости очень точной печати устройства подачи лoMacho. Моя первая печать была несколько неудачной, а запасные части BMG стерлись из-за плохой центровки механизмов подачи

Отличия от оригинала

Disclaimer: Для Ender 3 NEO и других Эндероподобных вам необходимо приобрести каретку, такую же как у Ender 3 
CR-Touch офсет:
y_offset: 10.1
x_offset: 25.2
Экструдер:
rotation_distance (стартовое значение) - 5.65 . Обязательно откалибруйте после установки шаги!

  • Корпус стал немного больше для возможности установить HGX Lite

  • Отверстия крепления к каретке сдвинуты ниже для возможности установить HGX Lite

  • Добавлено место крепления CR Touch. (выполнено в форме посадочного места для модульности, чтобы для те кто хочет, могли спроектировать под свои виды датчиков)

  • Длина PTFE трубки между радиатором и фидером изменилась (точную длину дополню когда буду разбирать)

  • Добавились 2 отверстия под вплавляемые втулки М3 и необходимость в 2 винтах м3*6 для крепления держателя кронштейна CR-Touch

  • Изменилась планка крепления кабеля - сделал ее подлиннее, чтобы можно было закрепить проводку хорошо во избежание трения о шестерни фидера

Необходимые материалы:

  • вплавляемые втулки М3*5 - 12 шт.

  • E3D V6/Volcano хотенд с радиатором

  • 40x40x10(20) вентилятор для обдува радиатора - 1 шт.

  • NEMA14 36 мм+ HGX-Lite + винты которые есть в комплекте для крепления между собой

  • 5015 турбинка для охлаждения модели (желательно GDSTime DuallBall) - 1 шт.

  • винт M3x6 - 4 шт. (база к каретке + крепление кронштейна CR-touch к базе)

  • винт M3x8 - 4 шт. (крепление директа к базе + база к каретке )

  • винт M3x10 - 1 шт. (воздуховод к базе)

  • винт M3x16 - 2 шт. (крышка базы)

  • винт M3x18 - 2 шт. (для 4010) опционально

  • винт M3x20 - 1 шт. (для 5015)

  • винт M3x30 - 2 шт. (для 4020) опционально

  • 3-4 стяжки для крепления проводки

  • ~80мм PTFE трубки

Если вам понравился проект и вы хотите его поддержать:

Print Settings
  • Rafts:

    No

  • Supports:

    Yes

  • Walls: 6

  • Resolution:

    0.2

  • Infill:

    30

  • Filament material:

    ABS

Tags