Counting matching models…
Background I tried out several hook designs available for US pegboard, but none fit my pegboard just right or had sufficient strength/geometry for my needs. I spent enough time printing & testing incompatible designs that I finally gave…
I needed a game case holder for 14 PS4 cases but only found designs to hold 10/12 cases on here & Thingiverse. I didn't want to print multiples or consume the time/material required for existing case designs, so I made my own. This holder…
Update: Added a tolerance test based on feedback from makes. Please check fit with this part and adjust XY scale for desired fit before printing the whole part. Background I took the basic design from my M12x1.75mm shift knob and adapted…
I designed this hanger to improve organization of air tools near the compressed air tanks in my garage. It is meant for light items such as air nozzles, chucks, adapters, etc… It will hold 5X industrial-style ¼NPT plugs with enough…
The included nozzle for my 2.25" Shop Vac has never been “just right” for vacuuming out a vehicle. It’s also been a little too narrow for my needs. I've been using it mainly for cleaning up my pellet grill, so I was in need of a “clean”…
I needed a way to transfer 1" chlorine tablets from the bulk container into our pool floater without using bare hands or using up my gloves. I designed these tongs with a large enough opening to grab the tablets and they're thick enough…
Overview I converted my son's Pro Boat Sprintjet 9" boat to run a 1806 brushless outrunner motor, standard RX41 receiver, & 20A BL ESC. I designed a few parts to optimize the performance with the new drive system. Here they are… 3-Blade…
This is a redesigned version of my original wide nozzle with improvements. I also designed a style similar to the standard narrow nozzle that came with my shop vac. There are 4 styles, fits 2.25” hose: Wide Nozzle - similar to my original…
This is a 17mm RC wheel wrench I designed for use on my 1/8 scale Arrma & Mugen rc vehicles. The shape is ergonomic and height is optimized with a thru-hole for access to the axle set screws on most 1/8 scale RCs. The tool works great for…
Simple stand for Micro RC boats. Designed to fit ProBoat Sprintjet 9" & JTronics 3D printed 200mm jetboat. Print Instruction & Assembly Printed @ 0.3mm layer, 3 perimeters, & 20% rectilinear. (no support) QTY 2ea of the ‘STAND END’ &…
Background This print file is an extensively modified remix of Arkon Lincoln SCX24 Beadlock Wide Rims on Thingiverse by CheapAZHobbies I used PrusaSlicer to scale, remove material, & correct the geometry so it could be used on my SCX24…
The Issue I recently purchased a Husky 9-drawer mobile workbench and I loved it immediately except for one thing. The drawers have a soft close mechanism which requires extra opening effort over typical ball bearing drawers. Because of…
I designed this receiver hitch to be super glued onto the bottom of the SCX24 Bronco rear bumper. The drop hitch is removable for clearance when you aren't towing. The receiver profile matches the bumper as much as possible to reduce…
Once I completed my Lack enclosure, I recognized a need for tool organization that would be minimal, accessible, & easily relocated for future needs. I searched and found several prints, some slipped over the leg completely (would require…
Background I needed a ¼" driver for idle screw adjustment on my car that was low-profile, magnetic, & fixed to allow precise rotation control. I printed several versions of designs I liked, but the hex bit fit was too loose & shallow for…
This remix has the following changes: removed material from rear fender location for clearance to MM chassis motor pod added 1mm thickness side clips to tighten up body when clipped in place cut front clips to remove countersink features…
Background If you're a standard Sharpie user, you've used the clip built into the cap. The Metallic Sharpie is great, but doesn't have a clip-cap because it should be stored cap-down to work properly. Due to this feature delete, it…
Stelzer's Sunlu S2 Filamentdryer bigbase has improved stability one direction of the spool dryer, but is unstable in the other direction. It will tip over when opening the lid due to the narrower footprint of the new stand vs the…
I printed two probe spools to better organize my pellet grill temperature probes. I designed this magnetic hanger to keep them handy on the grill. It has two pockets to glue in 12x3mm magnets. It could also be used to hang other things as…
Simple angled stand (65 degrees) for Fahrenheit Humidity/Temp LCD Meter. Prints face down, requires no support. Update: added 45, 50, 55, 60 degree angle options to improve LCD visibility
I designed this adapter to use Dyson Animal attachments with my 2.25" hose Shop Vac. For reference - if you have another reducer application need, the actual CAD geometry adapts from 2.275"ID to 1.35"ID. The Dyson side has a draft that…
Several years back, I built a modified golf cart with an ATV drivetrain/suspension and I originally used a Hurst pistol grip shift knob I had on my Mustang. I wanted to change it up to something more comfortable for the seating position…
Background I finally decided to organize these ratcheting wrenches that have been piled into the wrench drawer of my toolbox for years. The holder was specifically designed for Craftsman double ratcheting wrenches so it may not fit your…
Background ProLine’s 1/24 Hyrax tires currently only come pre-mounted on their plastic beadlocks. The wheel width is a little narrow for my taste and results in an egg shaped tire profile. When mounted to both styles of Treal beadlocks I…
JoHnEyAp's base for wide mouth Mason Jars was just what I was looking for so I could print an M&M dispenser. I tuned up the thread area to remove the blanked out original threaded section and drop down the Mason Jar threads. I then took…
Update: included TPU feet from Elan As part of my Lack Enclosure Build for my new MK3S+, I wanted to isolate printer vibration from the table top and reduce noise. I designed my own feet which included outboard supports on the front of…
Replacement brackets to raise the front bumper of SCX24 Bronco. Out of the box, there's an ugly gap from the bumper to the body. These brackets are a direct replacement to the factory brackets. Raising the bumper reduces the gap and helps…
I really liked the wave structure in this container because its uses minimal material and optimizes size vs capacity. I needed a case for 24 AAA, so I set out in PrusaSlicer to cut, measure, move, merge, export, import, & repeat until I…
I needed something to better organize my multiple Xbox Controller Stands from In3DSpace , so I designed a tiered rack to work with them. The stands are located by the pocket in each step. I’d recommend securing with super glue or double…
1.3"OD knob for fine control and finger divots for speedy manual axis control. Reset button still accessible. Print Instructions Quick 39 min print @ 0.2mm Quality, 15% infill, Overture Space Grey PETG Installation Remove original Prusa…
AAA case with a basic snap hinge and rugged-style securing clip. Holds 24 AAA batteries. Correct size latch clip & pins included in model files or you can use M3x25 hardware.
I designed this stand to hold my Hudy RC Tire Balancer. The balancer can be hand-held, but the stand makes balancing hands-free and eliminates human factor during the process. When not in use, it can be easily disassembled and stowed in…
Background I really liked TankerTech's bucket handle grip remix. It just needed a few updates for the buckets I had around. All the wire handles on my buckets were not straight enough to fit in the wire path between the two grip halves (…
Background This is a plug for a backyard casting game. The game originally came with two fish shaped plugs and they've disappeared. I designed this replacement so my kids could continue enjoying the game. Works great with the fish targets…
I designed a magnetic holder for my Thermapen MK4 instant read thermometer I use when smoking & grilling. Could be used to hold anything of comparable size & weight. Print Instructions Printed with Overture Space Gray PETG at 0.3mm layer,…
I tried out this Nano Bracket - Bike Tube Strap Bracket to hold my Crank Brothers M19 Bike Tool. It worked, but wasn't quite right for the velcro I have on hand, plus I needed more fastener clearance. This design is 100% mine from…
I designed this plug housing to enclose 4mm bullet / banana-plug connectors for a charge lead adapter for a HOTA D6+ charger. This housing could be useful in any other application where you want to enclose 4mm female connectors. Print…
Winder to easily stow & manage floating rope during use for light 1.5lb kayak anchor. Referenced the remix designs for winder body & handle to create a new model from scratch based on winder body & handle with added holes and updated…
Compact rugged box to hold 24 AAA batteries with wavy structure to speed up print time. This is a remix combo of the wavy structure from Norkkon's AAA battery case with resized version of TinnT's rugged box with only a single clamp/hinge.…
I designed this holder for some old punches to keep them handy on my workbench and easy to move around for working. It has 15X 2.75" deep holes of various diameters from 0.28" up to 0.5". Should be easy to scale in X-Y to adjust hole size…
I have a universal 5-panel mirror that came with flimsy, thin steel mounts that allowed too much mirror vibration on my atv-swapped golf cart. Made it impossible to see at certain RPMs, so I wanted to try a beefier mount. I designed…
Background I had a couple brooms that were missing the end caps so I designed up a few custom sized. One is a basic cap, one has a hanging loop. Both have a drafted hex interior for a press fit, but can easily be super-glued or shoe-gooed…
My heater core sprung a leak the day before a cruise-in and I looped my heater tubes to bypass it. That left the bare heater core tubes sticking out from the firewall and I wanted something a little more visually pleasing than two open…
For years I've been filling my smoker tube by holding directly to the hopper cleanout chute on my grill….but this always ended with spilled/wasted pellets. I designed this adapter to mount on my Camp Chef SG24 cleanout chute and funnel…
I wanted to use my GoPro for timelapse video of my MK3S+, but I didn't have a good solution for mounting the camera on or in my Lack enclosure. I had already printed jakejake's TwistLock Clamp as well as his Hand-Screw Clamp and had seen…
Tinnt's Rugged AAA Box has resized clips in order to use 25mm screws and I wanted to use these printable pins. I resized them in PrusaSlicer and exported STLs for convenience to use the box in some other projects.
I designed this hanger to clip onto my compressed air tank handle (approx. 0.75" OD) and hold my Jaco tire pressure gauge. Should also work for other similar 2" dial gauges with a rubber protective cover. My first design required support…
This mount was designed to secure a Wix 33001 fuel filter to keep it from hanging by the fuel line. It is intended to mount to a 1x2 frame rail with zip ties. Use some old tire tube to keep it in place. Secure the mount with small ties…
The front wheels on a PlasmaCar are stationary by design but over time they may get damaged & ground down. We got a hand-me-down PlasmaCar with flats on both wheels so I designed some replacements. I used TPU for the toughness and…
These bands can be slid over the tires on Associated SC28 to add even more fun to an already righteous rc truck. Printed in TPU at 0.3mm layer, they're just thick enough for two perimeters with 0.4mm nozzle. Could be scaled for bigger…
Background Back in 2022, I remixed Luvem Studio's original Screw Lock Carabiner with an extensive cut/merge/scale in PrusaSlicer to delete the corner loop but I never released it. I recently took that model and stretched it for use with a…
I designed this charger stand with a 5 degree angle to reduce glare on my HOTA D6+ hobby charger which was hard to see on my bench and pit table. It also raises the charger up providing additional airflow to underside of charger. The…
Semicircular shade for Nest 3rd Gen thermostat. Keeps sun from heating up Nest & affecting temp reading. Mounts with 3M VHB tape or other double side tape of your choice. Printed in Overture White PETG @ 0.3mm layer.
My daughter got a ‘Back to the Roots’ Water Garden for Christmas and we set up with a betta fish. The water pump discharges horizontally about an inch above the water level in the plant tray, resulting in a constant water noise. After one…
Background I liked matthijsbos holders for Wiha precision drivers for the simplicity and compact design. I remixed to fit my specific 7pc Wiha 26592 set. Printing Printed @0.3mm layer, 3 perimeters, 10% fill, no support needed.
Clip for EZReacher tool with integrated hanging hook. Fits 5/8” square section of reacher. Prints with no support. Recommend 100% infill for strength.
Background Ceramic deburring tools work great for plastics. The edges of the ceramic blade don‘t dig in to plastic like typical metal deburring tools, so it's easy to dress a print to remove strings, zits, unwanted blips, & any other…
These are all currently available results.
