Counting matching models…
Milwaukee Packout Toolbox tray bins to help organize your toolbox trays. Bins are a very snug fit, you could just use a single bin, or an entire side. Several different combinations, including short and tall heights. The 87mm Bins make…
This was designed for our Travel Trailer table, to hold the sundry items we use every day like pencils, flashlights, tooth-floss and vitamin containers - but could be used for anything. At .3mm Layer heights on a MK3s it was just under…
Replacement shock-cord hooks from a tent-fly. Printed in yellow so they don't get lost like the originals! Original in black, prints in yellow. Hooks are just over 37mm long and 19.5mm at the widest part, 4mm thick. You should be able to…
As shown - a tight fitting adapter to allow Fisher Price Little People to be used with Duplo or Duplo Compatible blocks. You can print without support as long as you printer does okay with bridging. There is enough height to allow for…
Another Screen-door replacement handle. I checked first and many of the versions I found were a bit to small or tried to include the locking mechanism. We don't need our screen-door to lock so it didn't make sense. I sized this one to be…
I wanted a plain rectangular bin without any divider slots and without the need for printing supports. The large lip is required so the bins fit tight to each-other and so the lid will close properly, fitting inside the bin. I added a 5mm…
All the mini-bit holders I've tried lose their bits after changing a few times. I solved that by adding a small recess to house the 8mm x 3mm magnets we all get for the extruder gear visualizer! Just insert a pause at the first hex-layer…
Organizer bins for the Dewalt TSTAK folding handle toolboxes. I wanted some more separation for more parts, but also wanted to be able to take the container out of the bin. Two styles included - short and regular. The Short bins are 4mm…
I needed a simple RV Vent cover for our RV, but didn't want to buy a full louvered vent. This is 111mm or 4.37" in diameter and goes into a standard vent with a clip. I believe this will fit 6.5" diameter RV Vents. I included a small clip…
Zyliss Vice Pads for my new to me (used) Zyliss vice. If you are looking you likely know about this vice and the fact parts are very difficult if not impossible to find. These are a very good fit on both Zyliss vices I have - one more new…
This is an automatic overflow Rain Barrel Diverter for 3" PVC Pipe with a 1.25" side take-off that fits 1.25" sewer pump drain hose. My rain barrel had an opening that fits 1.25" hose and I couldn't find a design that used 3" PVC. Water…
Stacking marker tray with sliding dovetails to lock them together. Designed for Stampin Up markers, but would fit anything up to about 12mm - 13mm in diameter. There's an open base included to use as a riser, or you could use a…
The cord-wrap bracket on my miter saw broke and there is no replacement available so I designed and printed one. This is my first attempt at Fusion 360 and printing. It fits and it solved the problem so I call that a success! If you…
My original filament spool holder broke - but I liked the threaded-rod and clamps I made - so I needed something that would hold a 16mm (5/8" OD) axle that my filament turns on. This is sized for 1/2" Sched 40 PVC for the legs and 5/8"…
Over designed bracket to hold the Ridgid 18V Pane Light on the wall for both storage and for use above my workbench. My garage door blocks my overhead lights and this is a great alternative to get some extra light on the workbench as well…
Interconnecting Thread and bobbin holder for cross-wound thread. Several sizes and designs are included. The larger size fits the larger spools of Gutermann Mara thread and a matching bobbin. The smaller version will fit other similar…
Offset Hex-Head Screw Driver holder. I bought a good-set of ball-end hex screwdrivers and they are so-much better than the right-angle hex-keys for most 3D printer operations (where you don't need a lot of torque). I wanted something to…
Screwdriver holders that actually work! I have a few multi-screwdrivers and have never found the single hole or multi-hole screwdriver holders very good. I also have a French-cleat wall system and want to be able to move sections around…
I fill our RV at the campsite with a jug sometimes, so I need a way to hold a short garden hose. I have tried a number of other designs, and while they work, the ones I've tried have a few flaws in my testing; they either don't quite fit…
Simple drawers to fit in the Fence Rail of Delta 36-752T2 Table Saw. The 140mm version fits the right, the 115mm fits the left, by the power switch. You can scale to print longer or shorter if you need. Fusion file included if you want to…
Low Profile DIN box for a single breaker, specifically the MidNite Solar DC breaker. Our RV Came with a solar panel charge controller directly connected to the rooftop Solar Panel without a disconnect. I wanted a low-profile breaker box…
Standard Knife sheaths aren't big enough for the scimitar / butcher style knives. There are small and large versions of the STL as I have two different sizes. The Small version has two styles - an open back and a closed back. The…
This is a replacement t-handle from a snow-plow attachment for a 4-wheeler. It's designed around the standard with a few added features to make it a bit better. It's slightly longer, tapered a bit-better and the bottom has a flare to fit…
Ikea Duktig style door pulls that match the Ikea Duktig kitchen. Designed with separate washers and drawer pulls so you can print without support.
These are thumb-screw caps for 1/2" bolts (3/4" or 19mm head) that have an embedded magnet to hold them onto the bolt. My use is for levelling feet on our folding camp table - which doesn't have enough room to store the feet when it's…
I needed to disassemble my RV Faucet and noticed the inside part had an odd 12-point design to it - like a giant TORX bit. I didn't have one - and thought a simple plastic print would be more than strong enough to turn the threads. It…
I wanted an inexpensive way to add more thread to my industrial sewing machine and not the flimsy little metal rods that come with them. This might not be something that everyone can use - but the idea can be useful for other things. A…
Our Coleman camp-chairs came with cup inserts that were too-small for almost all of our cups and mugs so I designed this as a replacement. This is the third revision after I kept getting bigger mugs for camping. Obviously this would work…
I've always struggled with getting the caps off the large bulk-bags of wine. I've seen commercial units but they look too big/clumsy and I don't have a local supplier. This is designed to pop the caps off easily and prints quickly. There…
Custom bracket for the Lippert Screen Door Assist for narrow / close door opening situations. In our RV, the standard bracket was just a bit too far-out and would interfere with one of the drawers. You could push on the bracket then open…
My first T12 soldering holder didn't fit my trusty, 30-year old Radio Shack wire holder. The wire cage is 28mm ID, and roughly 33mm OD. This might work for other cages by adjusting the scaling, but I also included the Fusion360 file, and…
Our RV couch has cup holders that don't work with small cups and glasses, as they have an odd recess. I designed these to allow smaller cups and to eliminate the narrow recess at the bottom of the standard cup holders. Can be installed as…
I upgraded my soldering station to a T12 station, so printed some updates to my 30+ year old Radio Shack soldering stand. I like the brass coiled sponges better than the wet sponges, so I designed a holder that would fit the recess in my…
The sliding barn door in our Imagine XLS23LDE kept falling off, which apparently is a common issue. It's also quite heavy at almost 50lb or 22KG. We decided to just take it down, and hang a curtain. I didn't want to remove the existing…
This is a replacement switch for a heated-pad - may be similar to heat-blanket switches. 3D printing makes this a much better part than the original injection molded piece - which, as you can see in the pics - had very little plastic…
The stock USB outlets in our RV are fine, but they have bright blue LEDs. We purchased well made, aluminum USB adapters from Acegoo, a well known brand which also makes a dimmer switch we also added to the RV Acegoo USB Outlet, NO LED As…
These are all currently available results.
