Counting matching models…
Cable management. Second most important thing in the world. Maybe even first. Anyways, this little remix allowed me to clip the big bundle of cables to my Ender 5 frame. Nice and neat :) Update 16 jun '19 Noticed a small artefact on the…
This is not a printable thing, this is not a guide. This is a cheatsheet. Direct Serial connection from RaspBerry Pi (GPIO pins 8, 10 and 14) to SKR 1.4 (Turbo) This cheatsheet shows which wire goes where and what to configure in the Pi,…
The terminals on the Mean Well LRS-350 series PSU are not covered. This fixes that. It will not prevent short or shocks when poking around with a screenshot driver or other conductive items, but at least you won't accidentally touch them.…
THIS IS A PROTOTYPE This is a set of a TKL (normal size, full height TKL 80%) and matching NumPad. Both consist of a plate, on which the switches are mounted, a "pcb" on which the hot swap sockets are placed and a base, in which the USB-C…
About the relocation; I got the idea from https://www.thingiverse.com/thing:3830464 . Moving the electronics out of the cube structure gets me one step closer to an enclosed printer. Also I will soon receive the new 32-bit 4.2.7 ARM-based…
Based on the design of the “ Modular Drawers for IKEA Kallax ” by KILO , I created longer versions to fill up the entire depth of a Kallax pocket. Also, there seems to be a critical part missing in his Printable, which I added here, see…
Display for those trains you always planned to create a model rail road for, but never had the space, time, money e.t.c. Put them on display :) Designed for 3 layers, but should not be hard to extend to more. The project started with two…
This is a remix of the Apple Wireless Keyboard 3rd Generation case - https://www.thingiverse.com/thing:2673738 - but the remix-source-finder does not allow me to select this one. My contribution: Created a smaller version of the case, to…
— import to PrusaPrints messed up the formatting, please see the thingiverse page for a better reading experience — A stand-alone FluxEngine based on the magnificent work done by David Given ( http://cowlark.com/fluxengine/ ) ~This…
The Ender-5 is technically 95% identical to the ender-3, but the frame is completely different. The aluminum extrusions have the same measurements, but the tool holder for the 3 could not fit on the corner of the 5 because the Y-axis belt…
Update May 3rd, 2023: added a “Special” version with a 0.4 gap between the two “in-rail” parts, as well as shorter partial in-rail section… you'll see when you download and import into your slicer. The idea here is to have a better gap…
IMPORTANT NOTE feb 21st, 2021 This project is finished enough to be used, I will not abandon it, but I will also no longer give it care and attention, unless specifically asked for! Reason is, I have ordered a couple of 2209 drivers and…
Endstop relocation for X- and Y-Axis for Creality3D Ender 5 WARNING! If you don't do this correctly, you might damage your printer! USE AT YOUR OWN RISK! When installing, DO NOT, I repeat DO NOT USE AUTO HOME! first try: disable steppers,…
This remix makes the feet a little stiffer, and about 50% wider. Finally I made the horizontal sections solid for added strength. I absolutely do like the original, but when 8 of them break, snap, collapse in 2 weeks time, I need to get…
This is a remix of the Apple Wireless Keyboard 3rd Generation case - https://www.thingiverse.com/thing:2673738 - but the remix-source-finder does not allow me to select this one. My contribution: Created a 3rd part, an extension, to fit…
REAL filament (a dutch brand) often comes on a cardboard spool. That's fine, but most filament spool holders may damage and therefore weaken the spool. This ring fits (very snugly!) in the spool, making it sturdy and wear-proof. Removing…
As a kid I had a set of 6 foam cube puzzles. Combining 4 pieces of each set creates a big cube. Using photo's and with help of google Images, I managed to recreate all 6 puzzles. From photo using google to 2d pixel art design to SVG,…
[ Jan 21; update ] Printed a few sets, flaws detected, see below. Photos to follow. This is a work in progress, I'm curious to your opinion. This is original work based on inspiration by the work by (MatthewRobo)[…
[ Update: April 11th, 2021 ] Added feet for the extrusion, to be printed in TPU/TPE :) This is a storage rack for those boxes you get your screws, connectors etc. in from China. I have accumulated about 20 of these boxes and they need a…
I have re-remixed my own design to exact dimensions with extras; The previous design fits well, but is 200 mm long. The original lid is 198 mm long. Also, the with is corrected from 110 mm to 111 mm (* for tolerances I made it 110.8) The…
A buck-converter mounting plate that screws to the PSU of the Ender 5, and catches behind the power-switch for stability. I designed it to mount 2 of the LM2596 modules with voltage display (see image) and a Raspberry Pi. Hardware…
From an old HP/Compaq computer, I rescued a card-reader normally mounted in a 2.5" drive bay. I designed a case for it that uses the original screws to hold it in. The back is completely closed and the cable, which has a 2x5 JTAG Header…
Important note: This design is intended to be used with the electronics box relocated to the back of the printer. Will not work on the bottom as there will be no room for air intake, let alone a fan. Update Apr 1, 2021 Added a version of…
On my Ender-5, this one works beautifully! Thank you Wacio! On my Ender-3, however, the vent touches the heater-block, so I made 2 new versions, with respectively a 1 and a 2 mm higher top-part. To know which one to print; this is an…
The Keychron K2 HE (special edition) has wood trims on the sides. I want to create storage space for the USB dongle, this is step 1; recreating the trims. Edited on Jan 22 after feedback from Drazor; my models were 127 mm long, whereas…
Print as in STL file (no supports), insert in frame, rotate 90 degrees clock-wise to lock, slide in cable, done :) naming I find it hard to describe the clips/clamps/thingies so I decided to give them a name. Bill: The Bill clip is 10 x…
Copied in TinkerCad from Kilinich, carefully deconstructed, adjusted and reconstructed to reduce the rising angle to 40 degrees. I decided to keep both the front and back 40degrees, which in retrospect is not very smart; to should be 40…
Remix that is an easier print; Instead of honeycombs, which are slow to print, I have added alternating lines of 1.2 mm wide, 0.2 mm high. When printed on 0.1 or 0.2 layer height, the nozzle will have to move only diagonally in 1…
UPDATE - Aug 9th, 2026 It really works ... I would not have thought it would work this well, but I took a load of fully black (or darkgreen, or whatever) desiccant, spread it over some containers (filled about half), and one cycle PETG…
This is a remix in extremis. There is not a single part that has not been altered, but all for the better, in my opinion. Not there is anything wrong with the source (by ogg1e, which is a remix already) The changes are listed below.…
The terminals on the PSU of an ender 5 are not covered. This fixes that. It will not prevent short or shocks when poking around with a screenshot driver or other conductive items, but at least you won't accidentally touch them. I tried to…
A buck-converter mounting plate that screws to the PSU of the Ender 5, and catches behind the power-switch for stability. I designed it to mount 2 of the LM2596 modules with voltage display (see image below), but it can easily be adapted…
A FreeCAD model based on Pavels work, but added more parameters for easy configuration
Based on https://www.thingiverse.com/thing:1874648 but fully rebuilt (because of model artifacts I could not get rid of as easily as rebuilding) This 40-pin GPIO cover is based on the dimensions of the source thing. The remix is: 4 pins…
Today while printing, I bumped the power button on my Ender 5. Needless to say, ruined print, lost time, got an Idea ;) See here a cover for the power button that is placed by dropping the peg in the V-Slot, and turning it closed. prints…
I've seen many controller-board mounts/adapters for fitting an SKR (or MKS) mainboard (four holes in the corners) into a Creality Ender printer. With all Enders, the screw holes are unique for Melzi boards. For mounting an SRK or MKS in…
IMPORTANT UPDATE Keychron has open-sourced their design files, you can get the model from their repository; https://github.com/Keychron/Keychron-Keyboards-Hardware-Design So you want a Keychron K8 Pro or Max in a color of your choice?…
Why does cheese sweat in the refrigerator? In any case, cheese becomes less tasty looking when all sweaty and soggy. Most cheese boxes come with an inlay so the sweat does not touch the cheese. Mine did not. Luckily I have a 3d printer ;)…
If anyone knows what this thing is actually called, please... let me know :) Installation is simple. Break the tip off of a (wood) toothpick Insert the end of the rope in the bottom of the swirl. Push the rope in following the swirl until…
To protect the moving bed from grabbing cables (particularly a SD Card adapter ribbon cable) I created a simple shelf. Be sure to print logo-side down without supports for best result. Modifications available upon request. To install, you…
For the larger desiccant container created by @David3DOMEngin_14309 I created a funnel. It's a 30 minute TinkerCAD job that prints easily and reduces the amount of bounce-out of desiccant beads. It snaps in quite firmly but still easily…
First off; I'm new to this, so this is far from perfect, but it fits my needs, it might fit yours :) After printing the Pi sleeve (by tobbi007, the first remix he did years ago https://www.thingiverse.com/thing:2889371) I found three…
UPDATE: I'm mad. Absolutely mad... I made this: Disclaimer: this project was printed by JLC3DP at my own expense, no affiliation, but I do have to say; amazing service. I do however NOT recommend ;P Because then my keyboard is no longer…
Remixed the lamp to mount Dioder L1327 multi-colour led lamps. New mount for lamp, to mount, remove the metal mounting plate, then snap the lamp in the mount. (The pivot point should point toward where the metal plate was, photo will…
This is just a stand, puzzle not included ;) Category: Puzzles
Extended version of mount by Blinkii removed the "stop" to allow the mount to sit "in the middle" of the led strips extended the mount, 4 lengths; +16, +37, +58 and +100mm This is actually a remake of a mount I created (by remixing the…
Mainly designed and printed because I was bored. All printed parts on my Ender 5 are in REAL PLA Orange, so I though the knob of the display should be as well. This should fit any knob axis of 6 mm. Category: 3D Printer Parts
Update [Feb 26]: I no longer add the nut above the thingi, because then the distance is depending on the tightness of that nut, which can be different between the two. I no just use an 20 mm bolt and either piece of plastic screwed in…
Attribution beforehand; I was inspired by a picture I saw online for a Prusament spool as a Christmas tree ornament, my first version had terrible quality and was a single model file, multi-color and supports required, I tossed that after…
For the original part 6 of the set did not fit. It was way to loose. I created a new part by using the original part 1 as a "template", then scaled down 5% (in x and y only) and the screw now fits perfectly. Category: 3D Printer Parts
Based on (not a remix) instructions for the software by Randy Obillos , I got myself a RasPi v1.3 camera working on a RasPi 4B; Please be aware; this is not usable with the enclosure kit. When I got it built and mounted, I will create a…
This is a storage/carry box for the RPWK87 keyboard I created earlier this year, see here: I Tried several ways of getting the model fabricated, you can read my story about that here: This post is purely for this particular box. I…
Created with Tinkercad Revolve tool for the curve and Sketch tool for the profile, a simple mount that holds the phone against the back of the monitor and it is just right to do meetings with. A simple 30 minute design, 90 minute print.…
For storing a harddisk with a lot of historical data, the original packaging falling apart, I created this strongbox. It was designed with padding-foam in mind!. I don't have access to fancy filaments that foam up when printing, so I just…
Of all the upgrades the XL+ has, the spool holders bother me. Loading a spool takes careful alignment. No longer! I contemplated downgrading to the old spool holders, but then a thought struck; I have a 3D printer - I can solve this…
Mounting plate for the stock Ender 5 carriage on a MHN9H rail. Mounting the adapter plate to the carriage; M4 x 30 Hexagon Socket Countersunk Head Screw (x2) M4 Nyloc nut (x2) The two top holes where the wheel-axles were are M5 holes, we…
This is a u-coupler to electrically connect the 3 strips of Ledberg to a single light source. This is designed specifically to be used with https://www.thingiverse.com/thing:4729201 Originally created in OpenSCAD (before I discovered…
A smaller font version of the ins and del keys. In the photo is clear that I need to reprint a few keys, some black filament got in the yellow. But the result is great :) Only showing the keycaps here, spoilers ;)
This is a recreation of a Thing I printed about 5 years ago and needed to re-print, but the original Thing seems no longer available. So I recreated it. These are the Y-axis bump stops, mount on the four corners, if you have a BLTouch, be…
For my Ender 5 Endorphin Hybrid CoreXY build, I noticed that tightening the bolts for the X-Axis idlers causes binding in the bearings, leaving the idlers locked. So I cannot fully tighten the bolts. This created wobble in the idlers.…
Be advised; this is just an idea. I don't have the brainpower to figure this out on my own. The end goal is to "just throw on a spool" and the RFID via magic tells the printer what material is (about to be) loaded. There are many projects…
These are all currently available results.
![REAL (cardboard) Filament-spool adapter [Updated 2026-09-05]](https://media.printables.com/media/prints/114261/images/1120718_9c752fa0-bdff-4e4f-bb3e-648c4d310c0c/82933256ab0ff89c7b8319cf2233fd4c_display_large_11.jpg)
