Counting matching models…
This 3 part shoe rack is for saving space in a cabinet/closet. The inner width of the model is 135 mm, the height at the front is 84 mm and at the back 175 mm. You need to print the right and left parts with support for the pins. The top…
This simple yet elegant heart design with the word “love” written in a flowing script makes a perfect small gift or decoration for Valentine’s Day, anniversaries, weddings, or just to show someone you care. The model is designed to print…
A perfect little gift for Easter. The egg can be unscrewed and a small gift can be placed inside. Recommended print settings: 0.2 mm layer height top surface pattern → concentric bottom surface pattern → concentric internal solid infill…
Update 16.06.2026: Replaced wrong Connector STL with v2 version for the spring to fit Update 10.09.2025: Added Prusa-storage Drawer_Large.stl. 3 of those drawers would fit into one spool, can also be mixed with the original drawer. for…
These pearls are perfect to create custom necklaces or bracelets the hole diameter is 5mm, you can scale it in your slicer to whatever size you need. All 26 letters Numbers 0-9 Punctuation marks: -, !, ? one plank as a spacer Add a pause…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 70.31x125mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 1.4mm and the Actual Depth is 1.4mm…
A sunglass holder for up to 7 glasses. It is printed in 2 parts. Use glue to connect the parts. Recommend to print with adaptive layer height for the “Sunglas Holder - Holder” The glue I use:…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 225x225mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 1.6mm and the Actual Depth is 1.6mm…
Adjustable phone stand to print in place without support. After printing, carefully twist on the hinges to set up the stand.
The Nordschleife is one of the most iconic race tracks in the world. This HueForge shows the layout of the track Instructions Project: nordschleife.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The…
Simple model of a rose Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 80x80mm in size Filaments Used: PETG GEEETECH BLACK Transmission Distance: 3 PETG Sunlu Red Transmission Distance: 10 PETG…
This organizer holds up to 10 gift ribbons with additional drawers for small stuff. For the lids you need 8 x “Ribbon_organizer - Lid” and 2 x “Ribbon_organizer - Lid_side”. You need to insert filament through the lids and the base to…
Keep your Pixel Buds 2 Pro stylishly docked and always within reach with this custom-designed 3D printed stand. Crafted for a snug fit and clean presentation, this stand blends minimalist aesthetics with everyday practicality. Features:…
Patent of the B-2 Stealth Bomber HueForge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 196.41x250mm in size Filaments Used: PETG GEEETECH Black Transmission Distance: 2 PETG GEEETECH White…
I needed a way to store some money in my car, so i designed my own money clip. Just print it on the side. I recommend a low layer height (i.e. 0.08) for the best details. For the best result print the part on the side: I also added a…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 225x162.2mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm…
Bring holiday cheer to your home with this beautifully designed 3D printable Christmas sleigh! Featuring classic curves, a high backrest, and elegant runners, this sleigh captures the magic of the season. The side is adorned with a…
🎃 Halloween Pumpkin Keychain – Two Variants! 🧡🖤 Add a festive touch to your spooky season with this charming Halloween pumpkin keychain! Perfect for trick-or-treat bags, party favors, or just showing off your Halloween spirit. This print…
Update 17.04.2026 I added a "hook"-Version (T2O - Tape_mount), where you use double sided tape, so it is less visible: This is a universal, adjustable tip‑to‑open mechanism designed to be mounted on any wooden board inside a cabinet.…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 170.94x250mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.3mm and the Actual Depth is 2.4mm…
This is a simple and cute Easter bunny designed specifically for easy 3D printing . The smooth, minimal shape makes it perfect as a seasonal decoration, small gift, or desk buddy. The model is fully support-free and prints reliably on…
To execute the test, you need to insert the Test_OBJ in the Adhesion_Testframe. Then you hold/stand on the frame and bull on the Test_OBJ until it breaks. I use a bow scale which saves the maximum force after the part breaks: szdc88…
Bring some iconic bar vibes to your home! This 3D‑printed display stand is designed to hold two small 2cl Jägermeister bottles and showcase them in front of a clean, bold backwall featuring a forest silhouette and classic lettering.…
🧗 Climber Cable Organizer – Decorative Cable Hook (5–10 mm) Give your cables a sense of adventure! This climber silhouette cable decoration transforms ordinary wires into a vertical scene full of motion and character. Whether it’s for…
This holder is mounted on the side of the ikea lack table. If you use some kind of ikea lack encloser this is a great way to store your printplates. You can store up to 3 print plates in this holder. To mount this holder you need to screw…
Bring your mobile gaming setup to the next level with this custom-designed monitor lid frame and retro-inspired decorative pieces ! Perfect for aluminum gaming cases, this design turns your lid into a stylish display for your monitor…
The original cable winder works great individually, but I wanted a way to store two or more winders next to each other in a modular holder This stand keeps both winders upright, aligned, and easy to access, making cable organization more…
Project: zoro_v1.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 126.01x225mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the…
Elevate your tabletop game with this cozy yet practical coaster, designed for both comfort and durability. Featuring a soft, fuzzy skin surface that adds a tactile touch of warmth, this coaster is perfect for home offices, coffee corners,…
🛞 Spinning Wheel Lamp – 3D Printed Desk Lamp This Spinning Wheel Lamp is a fully functional, mechanically driven display lamp inspired by automotive wheel and brake designs. The wheel (tire + rim) spins smoothly on the base , driven by…
These are all currently available results.
