64 models
Please give this a like if you enjoy it! It will help me make more of them. This is a replacement for the TPU block that is used to hold the reed in. You can use any material with this spring style block. Tested in PLA and PETG, they both…
Please like and download if you enjoy this model, it helps me justify the time. --- How to print: * Use a layer height of 0.16" max. These are designed for this layer height. (.2 reported to work fine) * Turn OFF supports. This model has…
Please give this a like if you find it useful or just like the Idea! This mask can be used for anything such as a remote ventilation unit or cosplay. Don't depend on it to save your life, it was something I did to learn the ins and outs…
These two plates allow you to mount the Ender 3 variant of the TZ hot end to your Voron on a Dragonburner. This variant of the mount is a through hole design right to the MGN12C. The front and back brackets you need are included in the…
This file Is Free as in freedom, not beer. That means it is totally open source including the software used to create it. What better way to showcase a 100% free file format and CAD package other than a solid model of the American flag.…
A simple door lock to keep the kids out of the closet. Easy to modify SLDPRT file for different thickness doors. Prevents the door from opening when in the center section, slide it over to open. Simple and effective! Print instructions…
This mounts two 60mm fans to the center bed support of the Voron Trident. It will mount them flush to the bottom in order to not take away any Z travel. It could be used to flush mount any 60mm fan on a typical 2020 extrusion. Two step…
Please heart and download if you like this model, it helps me put time into creating more useful items! V5.1 update - added cutout for center filament guide NOTE: This must be printed ABS, ASA or better temperature and creep resistant…
Please give a like to this model, it helps me justify the time spent making these gadgets. *** update - I replaced the files with new ones with a more flexible cut out so you can more easily remove the board without breaking the USB-C…
I wanted to mount the display on the front of the mbot without removing the ultrasonic sensor. I drilled out the 3.3mm holes to 3.3mm and then tapped them. Will require M4 X 15 or 18mm bolts. Print it face down on the matrix mounting…
Requires M3 45mm long bolts to mount to the super simple slide on only DIN rail adapter. Both parts print with no supports. Print the DIN rail on its side, and the case face up. A FreeCAD file has been provided for the DIN rail adapter.…
If you like this model please heart and download so I can justify making more! This FreeCAD file makes is ridiculously easy to make a custom checkerboard pattern. I included a chess pattern (8x8), but you can make whatever pattern you…
This is a rough draft of a very simple to print hack rack. V2 will be spreadsheet driven so anyone can easily modify it.
Comfortable no snag and very adjustable strap for the Prusa face shield and derivatives. Print instructions Zero infill, one perimeter and zero top and bottom layers. Pads are 100% infill. .3mm layer height and .6 wide. Use the attached…
This was just a quick fix, that makes this better but does not fix the problem 100%. Check out my other model for the real fix! This is a very quick fix for the Sunlu E2 filament drier. Although it is advertised as being able to use 3Kg…
There are two files, one for the actual TPU seal and the other for converting an 11/32 ¼" hex socket into a removal tool. The printed insert is just a guide - it is very difficult to do without it. FreeCAD files are included so you can…
If you enjoy this model, please give it a like! This took ages to get right, and I hope to put this kind of effort into more parts. 2020 Extrusion clip with a 3mm diameter thermistor holder. No hardware needed at all, just push in and it…
I had a 9.5mm SSD to DVD Rom caddy for my Dell M4500 I got from here: http://www.newmodeus.com/shop/index.php?main\_page=product\_info&products\_id=451 It had an angular bezel as shown in the picture on the left. When I got an M4700, it…
I modified VerticalDocs face shield to include Octagonal pins that are fatter and more spread out. This anchors the plastic in very firmly. Sliced and diced the model to create the lower support with the same exact mounting method. To…
My kids had a great time building the SKLEP Mk 1, but when it came to firing it, the bungee cord we had just didn't perform. We have plenty of rubber bands so we used it with a pen for a while. This made it super ugly! This little gizmo…
Please like this model, It helps me justify the time expense. This is a super simple and highly effective horizontal chain adapter for a Nema 14 motor (36mm). I have also included a stealth burner mount version that has an additional tab…
This part is simply the Voron Trident or 2.4R2 X carriage left and right frame with holes moved towards the center by 2.5mm each. This was a particularly difficult model to modify. Voron models are complex and very detailed. I tried to…
Replacement LCD cover for when yours breaks! FreeCAD Source file included. Print instructions 100% Infill - clear material. Search for “Print Glass” for instructions on how to print PETG super clear like glass!
Please like and download this model, It helps me justify the time expense. Sneaks compatible case for Arducam 1080P Low Light Low Distortion USB Camera Module with an M12 lens. AKA the UC-B18 SKU B0468 (2MP IMX323) Amazon ASIN B0CGLW3Z1N…
2026-09-17 - Update: Added modeled in support for the back side. Added a front side without Bambu text. Added a full STEP assembly including the hot end. This adapter does not need the difficult to install heat set inserts. It also…
I was tired of my kids structural projects falling apart depending on the brand of gum drop used! Some just fatigue more than others. These little gum drop replacements were not even noticed by my daughters friends or teachers. It is…
Please like this model, it helps me dedicate time to making custom models! If you do remix this please link to this, it took over two dozen attempts to have this fit correctly. This is a snap in clip for the WPL-C24 Toyota Hilux looking…
I thought the world needed a way of auto-magically generating an 8-bit style 3D rolled cigarette to go along with the very useful Thug Life 8-Bit style glasses. You can either print the parts without doing anything at all or load up this…
This is a quick way to mount the BIQU MicroProbe to your original style Satsana fan duct without reprinting the entire thing over again. It installs on the left side over the Satsana and also has a lower hole for the BLV linear rail…
NOTE: beware of the crossbow, it could ride up against the filament and make it seem like the extruder is not working correctly. It needs a return spring to be reliable in my opinion. 2026-09-27: added a Duck Burner extruder adapter and a…
This mounts the Afterburner flush to the mounting plate of the CR10 or Ender 3. The plate removes provisions for the Omron probe and adds a mounting hole for a BLTouch or Microprobe on the right side. The new simple and stronger BLTouch…
Please give this model a like so I can make more of them! Not exactly a remix, but it was Rob Latur's electrical box is certainly the inspiration. You can use this to flush mount a decora outlet or switch. It has strap mount holes in case…
After the Cartographer CNC mount upgrade, I either needed to move the end stop to the head or make an extension. This is quick and easy. It also gives you an additional 4mm of X travel if desired. 1.25mm offset is the same as the original…
Timid, but focused. Takes the hot end like a duck to water. 2026-09-20 V1.14 Shortened the spacer and tightened up the package. I took out the Trident gantry files, this duck went down a rabbit hole. 2026-09-18 V1.11 Updated with a full…
This model allows you to remove the screen on the CR10S Pro and Pro V2 and blank off the hole. On the back it has mounting bosses for a Raspberry Pi Zero. The FreeCAD file used to create it is included. To change the mounting holes, edit…
This model prints with only one material change! The chess board is upside down on the board and the black squares are only one layer thick. You can print it right side up also if you prefer, but you will have to wait till the end for the…
I made this power supply bracket to install a 500W power supply in place of the original Prusa 240W unit when mine failed. Instead of replacing it with an original supply, I doubled the power to increase reliability and also reduce noise.…
Please heard and download the model if you like it! This plug covers up your fairlead opening so debris does not impact itself into the synthetic rope and cause it to break prematurely. This will hopefully also keep any water out of that…
This is a bottom bracket for the CR10S Pro variants that allows you to twist the ribbon cable 90 degrees so it does not take up that much space. The printer should have come like this from the factory! I tried to make it with a bit of…
If you like this model please give it a like and download so I can make more! This converts a common 5 gallon detergent tank into a fuel tank with a Midwest Can compatible cap. The containers might be called: 5.3 Gallon Tighthead | Carboy…
These parts fit a generic Diesel heater sold on Amazon under the OMT, Orion Motor Tech brand. It is thin and tall. The legs fit a 167mm base. There are also two parts in there to convert it for a top cover only or top and two sides. This…
2026-10-13: the camlock only works well with a spring. it is not consistent without it. Perhaps a curved disk spring would be lower profile. 2026-10-10: Added a camlock file. The center cross threaded pin is steel in the picture.…
Updates: 2026-10-15: archiving self tapping style, not strong enough for the top had hold downs. Updated 3mf with brims and removed self tappers. 2026-10-14: shortened blanks and added wings so they press in and stay put. 2026-10-13:…
This mount shifts the creality mainboard away from the side of the case so you can route the USB cable internally on a CR10S Pro and Pro V2. It could be used to connect it to Raspberry Pi for an Octoprint server or a Klipper conversion. A…
Please like this model and download if you enjoy this! Please consider using the amazon affiliate links bellow to support my designs. This is a very simple and lightweight wheel hub and wire landing gear holder used to convert a pool…
We used this stencil to spray paint “Failure Management” onto an old red long sleeve shirt in white. It works out great and lasts forever with base color paints with no glitter or any other additives that get pulled off in the wash. Very…
These are replacement feet for a tripod with triangular looking legs. If they look like the picture bellow, you can modify the FreeCAD file VERY easily by just entering in some values into the spreadsheet. The profile of the leg should…
The Fysetc CNC bed mount for the V0 fixes all the bed bending issues and makes the printer awesome. It's an amazing product, but is also very frustrating that there is no documentation. You need this spacer if you have a V0.2, the drag…
Note this is a work in progress, I have not fully assembled the printer with these so there might be some mistakes. The top hat is 100% tested. Frustration-free assembly of the Voron 0.2 Trim Nuts. Trim Nuts meaning, a slide in trim and…
Please give this model a like so I can make more! This is a very easy to use and print wire tag FreeCAD model. It is driven by the spreadsheet inside “WireDims”. Simply change the dimensions and see the model change in real time. They can…
Check out my LGX dual filament sensor model for more info on how to build this. It is very similar but no parts are the same. More info to come.
If you like this model, please give it a like and download it so I can justify making more! Here is a winch cover I drew up in FreeCAD. It can be printed as two parts or one. The 3MF file is already set up for both. No need for support,…
I wanted a missile switch cover for my furnace since I was sick and tired of it getting shut off by mistake. The regular covers are so boring, so this spices things up nicely. No one will dare shut off that furnace now, they might blow up…
Credit where credit is due: based on this, I was not able to post as a remix. RX TOOLHEAD V5.5 using Bambu H2S/A1 gear & H2D Hotend This is a pre-alpha release. Designed to mount an extruder with the LGX bolt pattern. Testing with my LGX…
This is a quick hack, but it works. This requires a PowerWheels adapter from Amazon. The amazon adapter is bolted onto this adapter plate and the adapter plate is glued into your gutted old dead battery. It is not the most elegant…
If you like this model please like and download, it helps motivate me to make more! Please consider using the amazon affiliate link bellow for the required hardware! The spacers Raises the Datto Alto V3 up 14mm to increase airflow or make…
I needed to measure some window frame radiuses that had awkward geometry to get around. The first plate has a 10mm radius gauge on it. This model can be scaled directly to the size you need. If you need 9mm radius, scale 90% in the x and…
A STEP assembly has been made of the Filametrix system. This aims is easier assembly and less friction. 1 - thread on an M5 nut onto a PTFE tube. 2 - cut it off clean 3 - with a 2mm drill, just turning it by hand open up the squished tube…
Please like and download this model, It helps me justify the time expense. This is designed to be printed in TPU. 85A works better than 95A. I recommend something like NinjaFlex since it is documented to hold up to oil. The cover fits on…
This is a simple adapter that you can use to secure your rotary Chinese Diesel Heater (CDH) rotary controller to a standard square controller mount. Uses two M2.5 x 12mm screws A FreeCAD file is provided for easy modification.
Please give me a like and download, it helps me make more files like this. Please consider using my Amazon link if you want to use a motorized grease gun to make this job quick and easy. I used this one and I love it.…
a test to see if this quick edit works. scaled everything by 1.33 Stretched the top hat from 240ish mm to 510mm : +270mm Bolt holes pulled back to 6.2mm, 3.4mm and 4.7mm. 4mm deep for the inserts. Puzzle Piece 4 part top hat assembly…
The LGX Lite spring conversion files in the linked pintables are pretty good, except there are no STEP files. Any issues encountered and you will have to modify the files in something like blender. There are some issues with the file, all…
1515 extrusions drive me crazy! The frustration is gone once you throw these on there. If you want to cover the entire slot you need at least two of them so you can move one to the side if you need to roll in a new nut. These where made…
These are all currently available results.
