Search results: 27

Sort order

3,217 models

P
PrintablesFestool

Festool D27/ D36 suction hose holder

Festool D27/ D36 suction hose holder - simplify your tool management Where do you currently hang in your suction hose? Print your own Festool suction hose holder and make your everyday work easier and more productive. Do you need further…

Print approx. €1.00–€1.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4,055
Likes
498
Rating
5
P
Printablesgeektoybox

Logitech C270, C310 and C505 Focus Wheel (Complete)

I found this focus wheel at https://www.thingiverse.com/thing:714475 , but it was 11.1mm thick and it made my camera look like a toy so I created a much slimmer one. My final design comes in at 4.4mm so it is much more compact and works…

Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,789
Likes
423
Rating
4.94
P
PrintablesGregEl

Voronoi Lampshade E27

A functional lampshade with a voronoi like pattern for E27 lamp sockets that have outer threads (like the IKEA Hemma cord set). Video tutorial: https://www.youtube.com/watch?v=6cxxnytzxkY I have also included a model that can be used as a…

Print approx. €7.65–€9.35 excl. taxPreliminary estimate for one variant

Downloads
1,601
Likes
382
Rating
5

HexScraper fast (18mins 0.6mm / 27mins 0.4mm)

Please compare the first photo with your slicer before printing. Make sure that your scraper head underside looks like photo 3. If it takes longer than 36 minutes to print, then something is wrong with the slicer settings. Optimized…

Print approx. €0.65–€0.80 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,276
Likes
272
Rating
4.72
P
PrintablesPomi

Logitech C270 Webcam Cover Replacement (with GoPro Mount)

This is my cover replacement for Logitech C270 Webcam. All you need to do is disassembly the original webcam and remove PCB electronics board. The board is fixed in the new housing using the original screws. Pros Click-clack system. No…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,229
Likes
188
Rating
4.69
P
PrintablesPrinterfreak

Logitec C270 - Focus Adjustment

Modification to adjust the Focus on a Logitec C270 Webcam. Be aware that if you open the Camera the Focus Ring is glued into place. You can Remove this glue with a small Screw driver. Additionaly you will need 2x M3x8mm Screws to mount…

Print approx. €2.03–€2.49 excl. taxPreliminary estimate for one variant

Downloads
1,131
Likes
137
Rating
4.97
P
Printablesebeeche

Prusa MK4 camera mount for Logitech C270/C310

Having a 3D printer without a camera is like driving at night without lights. I decided to create a base that doesn't require any alteration to the MK4 and can also serve as a starting point for others to create their own camera support.…

Print approx. €0.83–€1.01 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
891
Likes
203
Rating
4.76
P
Printablesfoorschtbar

Logitech C270 Webcam holder and arm for Original Prusa Mini/MK3/MK4

A simple Webcam holder with a arm for a Logitech C270 Webcam. Works with Original Prusa Mini, i3 MK3, MK4 and similar printers with standard aluminum extrusion profiles. You can Mix&Match the different arms, but i suggest to use the parts…

Print approx. €2.27–€2.78 excl. taxPreliminary estimate for one variant

Downloads
559
Likes
111
Rating
4.89
P
PrintablesMykashy

Metric Screw Measuring Tool M6-M27 up to 120mm

Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure screws of length from 5mm to 120mm. Color change for the letters & numbers If you dont want to paint the letters you can add a color…

Print approx. €3.29–€4.03 excl. taxPreliminary estimate for one variant

Downloads
359
Likes
141
Rating
5
P
PrintablesAhmed Alsalawi

190E W201 Center console zebrano wood panel plastic buttons support 2016800275,2016802675,20168008,2016800175,2016802475, 2016802475

Use ASA,ABS, PA6 , print with support easy installation with direct taping screws 2.5mm diameter and 3.5mm screws or epoxy glue

Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant

Downloads
315
Likes
17
Rating
0
P
PrintablesŁukasz Dubczyk

Lego Fibonacci gear 27 teeth

Lego Fibonacci gear 27 teeth

Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant

Downloads
305
Likes
41
Rating
4.5
P
PrintablesDaniel Vitanza

C270 / C310 Focus Ring + cover with leds and microphone holes

1. Introduction This is a remix of a remix (Scatterthought) of a good Logitech C270/C310 Focus Ring design. I just add my contribution ;) -Tighter tolerances between ring and cover. -Change the “gear” design to better grip the lens.…

Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
301
Likes
28
Rating
4.88
P
PrintablesPavel Janeček

8E0863727A VW Hood Insulation Pad Clip

About model My custom design of Hood insulation Pad Clip for VW Cars. This was made for Škoda Fabia II FL (2012). Size: 25x20x17mm Compatibility VW carmakers brands Modifications I optimised original VW design like so: Clamp has better…

Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
272
Likes
26
Rating
5
P
PrintablesEl Chinn

LEGO Technic Liftarm 1x7 (6278125)

my son lost this part while building some cool original lego technic monstertruck (thanks to the LEGO company), and i was irritated not to find it somewhere here. luckily 2 were used in the model, so i started to reengineer it . the angel…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
269
Likes
25
Rating
4
P
PrintablesDedoper

Universal Car phone holder and mount 90, 180, 270, 360 degrees tiltable

Car phone holder and mount, universal Vertical for phone calls etc and pull up the pin to tilt the phone left or right

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
152
Likes
30
Rating
0
P
Printables3DPrint68

Festool D27-36 suction hose reel holder

Festool suction hose reel holder - improve your tool management. Can be used in addition to : https://www.printables.com/fr/model/806346-festool-d27-suction-hose-holder…

Print approx. €2.46–€3.01 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
149
Likes
22
Rating
0
P
PrintablesMax

Logitech C270 mount Prusa mini with cable strain relief

Bit of a mash up I was already using the X-axis cable strain relief clip, so I incorporated geektoybox’s C270 webcam mount. Perfect for spaghetti detective or general nozzle/print checking. Added an extra 10mm offset towards the rear to…

Print approx. €0.99–€1.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
145
Likes
20
Rating
5
P
PrintablesPaxer

Dyson V7, V8, V10, V11, V15 Vacuum Bag Adapter for 27.4mm Thread

Added a thread on the end to screw onto a 27.4mm thread, like the one on the diy vacuum bag here: https://www.thingiverse.com/thing:6107866. (it is a really good diy vacuum bag by Johnnywatchbox on Thingiverse). If your vacuum starts…

Print approx. €1.50–€1.84 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
129
Likes
14
Rating
0
P
Printablessternli27

Fader Knob Cap for ReVox Studer C279 Mixer / Mischpult Faderkappe

Depending on the precision of your 3D printer, you may want to select a different version. For me, version 24 was the best fit. Cap1: 8.05 x 2.20 mm Cap2: 8.10 x 2.20 mm Cap3: 8.15 x 2.20 mm Cap4: 8.20 x 2.20 mm Cap5: 8.25 x 2.20 mm Cap6:…

Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant

Downloads
89
Likes
6
Rating
0
P
PrintablesBenschCraft

Vorwerk VT270 vaccum cleaner nozzle adapter

found on thingiverse print settings: Prusa mini+ No Rafts No Supports Resolution: 0.2 Infill 15% Prusa PETG

Print approx. €3.05–€3.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
87
Likes
8
Rating
0
P
PrintablesIronAegis

CR-10 Smart Pro Logitech C270 Right X-Axis Mount

This is a cover that slides over the existing x-axis tensioner and does not require any hardware or modifications to secure to the machine. Use an M3x30mm bolt to self-tap the threads holding the camera to the mount.

Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant

Downloads
82
Likes
8
Rating
5
P
PrintablesJacopo Tediosi

Vevor Wheelstand (Logitech G25, G27, G29, G920) Shifter Support

A shifter mount for the Vevor Wheelstand for Logitech G25, G27, G29, G920, tested with the Logitech Driving Force shifter. but should also work for other shifters with table clamps, alternatively the model can be edited to punch some…

Print approx. €12.38–€15.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
79
Likes
12
Rating
0
P
PrintablesTeo_211

1966 Ferrari 275 GTB Wall Art

Very nice and detailed wall art silhouette of the classic 1966 Ferrari 275 GTB Size can be changed. I accept suggestions

Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant

Downloads
72
Likes
22
Rating
5
P
Printablestomatis

Cover substitution for BK21-V27454-FCW on the inside of sliding door of a Ford Transit Custom

Self designed alternative cover substitution for BK21-V27454-FCW on the inside of sliding door of a Ford Transit Custom Prequisites: * Some welding glue (like UHU Plast Special) * Some more bit elastic glue (like UHU Plus 2 Component…

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
61
Likes
4
Rating
5
P
Printablesaaronp18

Nespresso Vertuo Plus Replacement Capsule Container Krups XN900 MS-624276

I picked up a second hand Nespresso Vertuo Plus which was missing the rear capsule catching container so I decided to print one! My print bed is 210mm so it doesn't quite reach the top, but that's ok, capsules still fall in correctly. I…

Print approx. €5.83–€7.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
60
Likes
5
Rating
0
P
PrintablesJohn Brown

ASUS Z270E IO Shield

Asus Z270E IO Shield. Printed on a Prusa XL 5T using PLA 0.4n. The item printed clean, no support or brim was necessary.

Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant

Downloads
59
Likes
4
Rating
0

E27 Base for "Lithophane Planet Lamp Collection - ⌀150mm"

Working with @Layer63_3290755 we decided to make the deathstar model of this lamp. Unfortunately due to an error in our communication we worked with different sizes of the lamp. When we finally decided to work on the 150mm Diameter…

Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant

Downloads
53
Likes
9
Rating
0
P
Printablesdjedje_zr7

There no place like 127.0.0.1

2 colors, no MMU required. 2versions : full infil and hexa infill

Print approx. €0.91–€1.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
52
Likes
12
Rating
5
P
PrintablesBruce

27.2 to 31.8 Seatpost Shim by Bruce

A shim for your bike allowing you to fit a 27.2 seat post in your 30.9 seat tube. Suitable for all kinds of bikes, seat posts and materials. Please contact me if you want different sizes. Made on a PRUSA MINI+ using PETG filament.

Print approx. €1.13–€1.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
43
Likes
4
Rating
5
P
PrintablesIgor Kopriva

Replacement part 481246279768 for Whirlpool dishwasher

Replacement of the plastic insert into rail holding the basket. That prevents the basket-holding rail from leaving the guiding wheels. It gets easily broken over time and is almost impossible to get hold of replacement. Recommend printing…

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
43
Likes
2
Rating
0
P
PrintablesBruce

27.2 to 30.9 Seatpost Shim by Bruce

A shim for your bike allowing you to fit a 27.2 seat post in your 30.9 seat tube. Suitable for all kinds of bikes, seat posts and materials. Please contact me if you want different sizes. Made on a PRUSA MINI+ using PETG filament.

Print approx. €1.01–€1.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
42
Likes
2
Rating
0
P
PrintablesBurt Simpson

Reinforced Jar Opener 27 mm

Using jblake's dimensions of his reinforced opener, I redrew it in Fusion 360 so I more quickly scale to different sizes while keeping the thickness at 14mm and the “catch tabs” at 2mm. This is the 27 mm model in the collection. Printing…

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
38
Likes
3
Rating
0
P
Printablesgia

AOC I2757Fh Monitor VESA Adapter

Bolts to a VESA mount (I used #10-24 bolts and nuts). Monitor's factory mounting post fits into slot. Can turn mounting plate upside down to elevate monitor a bit more (though you'll likely need to use a right-angle HDMI connector in that…

Print approx. €4.73–€5.79 excl. taxPreliminary estimate for one variant

Downloads
32
Likes
0
Rating
0
P

mistake-Update 27.04.2025 Refrigerator egg-compartment modular / puzzle for hunting gr.m or 2 quail eggs

Kühlschrank-Eierfach- Modular / Puzzle für Hünerei Gr.M oder 2 Wachteleier. Fehler-Update 27.04.2025: Der Puzzle-Zapfen bei Dateien Kühlschank-Eierfach- Modular 02 würde bei gemischter Zusammenstellung (2 kleine / 1 großes) zu Schäden am…

Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant

Downloads
30
Likes
6
Rating
0
P
PrintablesBen

Lasko 2708 Tower Fan Base Column

My Lasko model 2708 fan was knocked over and the plastic base broke. Instead of throwing it away, I designed a replacement base with a few modifications to make it more print friendly. The base reuses the original hardware. Add a stop or…

Print approx. €18.66–€22.81 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
30
Likes
3
Rating
0
P
PrintablesL7899

Nilfisk 107402774 tube holder

Nilfisk Multi II 30 T INOX VSC tube holder for aluminium 35mm tube. Tried finding this is shops to purchase, but was not available in my country.

Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
26
Likes
6
Rating
0
P
PrintablesPurefloyd

Print approx. €6.60–€8.06 excl. taxPreliminary estimate for one variant

Downloads
25
Likes
0
Rating
0
P
PrintablesBlueThunder05

Paradise GL22627BK Light Housing

The injection molded plastic housing that comes with the Paradise GL22627BK Landscape Pathway Light typically cracks/falls apart after 1-2 years. I modeled a replacement with the main difference from the original is I used external fuzzy…

Print approx. €5.39–€6.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
25
Likes
3
Rating
0
P
PrintablesSneh

SU27 Firewall

This is a 3d print file for the SU27 RC model that can be purchased on aliexpress here:…

Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant

Downloads
23
Likes
3
Rating
0
P

lego 5427

I couldn't find this brick anywhere. That's why I created this model for printing. The model is created with the LDraw library ( https://www.ldraw.org/ ). Program LDCad ( https://www.melkert.net/LDCad ) uses this library to create a Lego…

Print approx. €0.53–€0.64 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
21
Likes
0
Rating
0
P
PrintablesNautilus Forge

GIESSE E275 - window lock - spare part

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant

Downloads
19
Likes
0
Rating
0
P
PrintablesSean Kane

Frigidaire 318242275 (Electrolux ICON ) Stovetop knob base & post strengthener

This is a replacement for the Frigidaire 318242275 (Electrolux ICON) stovetop knob bases. Although the part you grab is metal, the base is plastic, and the knob post that connects to the stovetop often cracks at some point, and then the…

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
19
Likes
0
Rating
0
P
PrintablesMark

Panasonic AJ-PX270 Mic Mount to Sennheiser Cold Shoe

Designed to replace the shotgun mount on an AJ-PX270 with a cold shoe for hanging a Sennheiser wireless receiver pack. Print in ASA or PETG if you're going to abuse your camera by leaving it in hot cars or direct sunlight (bad photog).…

Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant

Downloads
17
Likes
2
Rating
0
P
PrintablesLinuTec

PAL-Übungsaufgabe 27

PAL-Übungsaufgabe 27

Print approx. €2.08–€2.55 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
1
Rating
0
P
PrintablesScrap King

Kings 270 degree awning support

Kings awnings have a habbit of getting droopy, as thier knuckles can bend a bit over time, which leads to the bag they live in when stowed riding lower than when first fitted. In my case, as it was mounted on my van, it would bash into…

Print approx. €5.26–€6.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
15
Likes
2
Rating
0
P
PrintablesFilcuk

Logitech C270 Focus Ring Mod Privacy Cap

A simple privacy cap for the Logitech C270 - Focus Adjustment Mod . ⌀ 17mm with an inner slope of 0.2mm - may fit other similar mods. Features No supports required ✨ Extremely fast print (≤2 min) 💨 Print ≤0.20mm layers recommended What…

Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
0
Rating
0
P
PrintablesJan Urbánek

All infill combinations ISO 527-2 testing specimens

The "group" files (pct) originate from my bachelor's thesis and exclude 35%, 45%, 55%, and 65% (we decided in initial testing that we could skip these). They also exclude Support Cubic, as there is no difference between it and the…

Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant

Downloads
9
Likes
2
Rating
0
P
PrintablesDaniel Baltz

Mitsubishi Outlander Interior trim 6977A273ZZ

- Mitsubishi Outlander interior part 6977A273ZZ - Printing of ABS is preferred. - Acabamento Parafuso Trilho Banco 6977A27

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant

Likes
7
Rating
0
P
PrintablesMagicShrimp

270 Degree Hinge for Elegoo Centauri Carbon

Required Stls: 1x hinge_upper 1x hinge_lower 1x arm_upper 1x arm_lower 2x nut_block *4x plastic_spacer *The plastic spacers go in the glass cutouts to align the panel and prevent the metal screw from touching the glass. Required Hardware:…

Downloads
9,744
Likes
1,137
Rating
4.9
P
PrintablesNikolica

M3 Round Screws (Hex head) and nut 2mm-27mm

Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5mm/s…

Downloads
9,273
Likes
2,751
Rating
4.29
P
PrintablesAlex_cf_Siu

270 degree Door Hinge for Creality K1

[5 Dec 2023 short update] Known Issues: A.) This is designed for K1, I don't own K1 max, not sure if it will fit, there are K1 max version 270 hinges done by others also available on Printables. B.) PLA will work, but recommend PETG or…

Downloads
8,747
Likes
753
Rating
4.8
P
PrintablesEon3D

Capybara – 27 min – The Master of Chill!

Meet the Capibara: calm, cute, and ready to vibe on your shelf or backpack! With its relaxed pose and friendly face, this little fellow is the ultimate print-and-go animal. A great companion for your desk, collection, or to turn into a…

Downloads
8,490
Likes
971
Rating
4.89
P
PrintablesNygaard Design

276 Human Low Poly People Pack (architectural model building assets)

276 individually scanned low poly people, models are shared from multiple authors under the CC attribution license. For more info on individual licenses see Loïc Norgeots sketchfab page (original author link). I split, rotated, and…

Downloads
8,395
Likes
490
Rating
4.92
P
PrintablesEon3D

Rexa – 27 min – The Chubby Chibi Dino

Here comes Rexa, the sweetest little dino from a long-forgotten land of fluff and fun! With a round belly, soft curves and sleepy eyes, Rexa isn’t here to roar… just to melt hearts. Prints in only 27 minutes with minimal supports—perfect…

Downloads
7,443
Likes
896
Rating
4.95
P
PrintablesNikolica

M2 Conical Screws (Hex head) and nut 2mm-27mm

Expectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: 5mm/s or lower…

Downloads
5,660
Likes
275
Rating
4
P
PrintablesNikolica

M3 Conical Screws (Hex head) and nut 2mm-27mm

Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5mm/s…

Downloads
5,197
Likes
708
Rating
4.44
P
PrintablesIn3DSpace

Logitech C270 Mount Prusa i3 MK3

Mount for a Logitech C270 webcam for the Prusa i3 MK3. Great for monitoring prints and creating time-lapses. This will require the removal of the original webcam base, which can be achieved by removing the foam end caps, exposing a screw.…

Downloads
4,458
Likes
613
Rating
4.82
P
PrintablesNikolica

M2.5 Conical Screws (Hex head) and nut 2mm-27mm

Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: 5mm/s or lower…

Downloads
4,124
Likes
226
Rating
4.5
P
PrintablesEon3D

T-Rex – 27 min – The Tiny Roar of Prehistory

Say hello to this fierce little friend—T-Rex is here to stomp straight into your collection! With its chunky legs, stubby tail, and massive head full of charm, this dino is a must-have for fans of quick and cute prints. ✔ No supports…

Downloads
4,021
Likes
609
Rating
4.9
P
Printablessuit

Human Skull with battle injuries (3D scan; Historiska Museet 260727)

3D scan of skull found on the Battle of Visby, where on 27th of July 1361 the Danes fought Gutnic Peasants. The human skull found at the Battle of Visby is a grim reminder of the brutality of medieval warfare. The skull shows clear…

Downloads
3,909
Likes
802
Rating
4.94
P
PrintablesDiablo

270 Degree Geared Hinges (V2) for K1/K1 Max/K1C. Easy print option. Not print in place.

I CANNOT SAY THIS ANY SIMPLER. I'M WRITING THIS IN UPPER CASE SO THAT WHEN SOMEBODY SAYS ‘I DON’T UNDERSTAND WHAT I NEED TO PRINT' I CAN SAY IT'S ALL IN THE INFORMATION PAGE. AT A BARE MIMIMUM, EVEN IF YOU DON'T READ ANY OF THE MAIN TEXT,…

Downloads
3,680
Likes
726
Rating
4.57
P
PrintablesManifold3D

Logitech H-pattern shifter mod G27 G29

UPDATE: I've redesigned my own version of this from scratch, you can find it here: https://www.printables.com/model/800917-logitech-g-shifter-gated-manual-and-shift-knob I remixed the model by simply combining the 'base' and 'top' part…

Downloads
3,620
Likes
200
Rating
4.75
P
PrintablesEon3D

Eki – 27 min – The Watchful Little Owl!

Meet Eki, your pint-sized guardian of calm and coziness. With wide curious eyes and a round feathery body, Eki brings quiet charm to any space. This owl’s tiny size and quick print time make it the perfect addition to your flock of kawaii…

Downloads
3,560
Likes
548
Rating
4.92
P
PrintablesNikolica

M4 Conical Screws (Hex head) and nut 2mm-27mm

xpectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 20mm/s…

Downloads
3,329
Likes
272
Rating
3.67
P
PrintablesNikolica

M4 Round Screws (Hex head) and nut 2mm-27mm

Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5-10mm/s…

Downloads
3,089
Likes
770
Rating
4.75
P
Printablesthall72

Lego Compatible (2780.dat) Technic Pin with Friction and Slots

This model is compatible with the lego system.

Downloads
3,044
Likes
211
Rating
5
P
PrintablesKSchloe

Festool D27 Hose Clip

Just a simple Hose Clip for the D27 Festool hose. Category: DIY

Downloads
2,832
Likes
373
Rating
5
P
PrintablesJerrari

MODULITH 270 Under-Table Starter Kit

Turn the underside of any table into storage. Screw in a rail, slide in a drawer. MODULITH rails mount under a desk, shelf or enclosure table with a few wood screws. Cases slide on and QuickLock holds them, so you can swap or rearrange…

Downloads
2,789
Likes
497
Rating
4.88
P
PrintablesNikolica

M5 Conical Screws (Hex head) and nut 2mm-27mm

Expectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 25mm/s…

Downloads
2,676
Likes
292
Rating
5
P
PrintablesDebolestis

E27 Lamp Shade Collar Ring

I have lost this part for my lamp so I made one. Inner thread diameter is 40mm. Tested in PETG.

Downloads
2,593
Likes
391
Rating
4.71
P
PrintablesTeirale

(27) Bard - Male - No supports needed

All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…

Downloads
2,522
Likes
279
Rating
5
P
Printablesjanw

Logitech C270 Mount for Ender 3 (v2)

This is a simple mounting bracket to attach a Logitech C270 to the Ender 3 X-gantry. It holds the camera at a good angle towards the bed and printing head, with the tilt being adjustable. The camera and bracket itself are attached using a…

Downloads
2,449
Likes
174
Rating
4.84
P
PrintablesEric Feliciano

Creality K1 Max 270° Door Hinges w Door Latch

Creality K1 Max 270° Door Hinges With Door Latch. My first attempt at a remix so any feedback is appreciated. For print tips, follow original.

Downloads
2,394
Likes
242
Rating
4.91
P
Printablesmcboeck

E27 Socket replacement Nut

Needed a replacement nut for our lampshade, so I made one. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 20% Filament: Prusament PETG Signal White

Downloads
2,308
Likes
237
Rating
4.95
P
Printablestevashkevich

Logitech c270 Mount

Just a remixed mount piece for the Logitech c270 webcam. I had already removed the mount plate from my webcam for a previous mount so this lets you just screw that into this piece. (it is/was a bit of a mess around to get the screw in,…

Downloads
2,161
Likes
250
Rating
4.84
P
PrintablesNikolica

M3 Hex Bolts (Hex head) and nut 2mm-27mm

Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5mm/s…

Downloads
2,076
Likes
351
Rating
5
P

Display Stand for LEGO Star Wars Microfighters and Polybags [last update 27.05.2025] / 75400 75391 75344

Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…

Downloads
2,073
Likes
387
Rating
4.86
P
PrintablesBuildX

#0027 Monopoly Organizer Tray/Inlay - "The Banker"

*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********* Working off of a design by @Jeroen P, I've had to remix…

Downloads
2,023
Likes
395
Rating
5
P

Shelby AC Cobra 427 Kit Card (1:24 scale)

Summary This is a model of a Shelby AC Cobra 427 in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned, but the car…

Downloads
1,862
Likes
371
Rating
5
P
PrintablesRIBsfit

Print In Place K1 Max 270° Door Hinges w/Door Latch

I've been waiting for a 270° Door Hinge for the K1 Max since I first scared myself that it would shatter if swung to far. The factory design has the screws run right into the frame if opened more than 90°. Metal screws against glass with…

Downloads
1,704
Likes
242
Rating
4.07
P
PrintablesKYZ Design

270 Degree Door Hinge - Designed for 3D Printing

I use this for my 3D printer enclosures - sometimes you want to open the door and get it out of the way. The mounting holes are for “6 gauge” or 4mm countersunk screws, the pivot is M4x30 cap screw (if you get a longer one with an…

Downloads
1,685
Likes
519
Rating
5
P
PrintablesRaegin

Wrench for Logitech G27, G29, G920, G923 racing wheel

Description Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!),…

Downloads
1,652
Likes
239
Rating
5
P
PrintablesNikolica

M5 Round Screws (Hex head) and nut 2mm-27mm

Expectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 25mm/s…

Downloads
1,649
Likes
132
Rating
4.83
P
PrintablesKalleKnall

OPEL Astra J washer fluid reservoir cap / Wischwasserbehälterdeckel 13227300

To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Just printed in PETG orange / black. To hold the cap down i insert two magnets (4,5mm x 1,5mm x 9,5mm). MMU…

Downloads
1,632
Likes
146
Rating
4.88
P
PrintablesMaxT

Christmas Door Trim Corner 27 - Santa Sleigh and Reindeer and Snowflake (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
1,566
Likes
346
Rating
5
P
PrintablesNikolica

M6 Conical Screws (Hex head) and nut 2mm-27mm

Expectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 30mm/s…

Downloads
1,550
Likes
157
Rating
5
P
PrintablesBrian Chu

Back Scratcher 27.5cm

I created it for my dad and thought it might be useful for others. There's a long finger one and a short finger one. Print instructions Change infill→fill angle from 45° (default) to 83° #edited 20231020

Downloads
1,539
Likes
108
Rating
4.85
P
PrintablesDeltaX_F

Boeing 727-200

I'm a big fan of trijets, and after modelling the MD-11 I thought it would be cool do a 727. The model is at the same scale as all my other planes, scale 1:400.

Downloads
1,480
Likes
82
Rating
4.75
P
PrintablesJace1969

Star Wars Executor Ship "275cm long"

Another great model uploaded to https://3dwarehouse.sketchup.com/search.html?q=starwars&backendClass=entity as a free download I like this model, but I'm guessing at about 5 - 10 kg's in plastic and 8 months to print. I might just shrink…

Downloads
1,468
Likes
212
Rating
4
P
PrintablesHaro

K1 270 degree geared door hinge

need 4x m3 insert nut

Downloads
1,466
Likes
137
Rating
4.64
P
PrintablesChirimorin

Logitech C270 mount for Neptune 4 Series

Version 2 is now available for download! Version 2 features a sturdier mounting system that clips in place, no more worries about your webcam falling off the printer! This version also slightly moves the camera back so it has more space…

Downloads
1,415
Likes
144
Rating
4.95
P
PrintablesPatrick.b

Douille E27

Douille complète en fichier STEP pour utiliser lors d'un design afin de calculer si les dimensions sont exactes et positionner son ampoule correctement. Je ne trouvais pas ce genre d'objet en step ou F3d donc je l'ai fait pour fabriquer…

Downloads
1,402
Likes
82
Rating
5
P
Printables3DPremiun

Goku Super Saiyan Dragon Ball Z #27

—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…

Downloads
1,351
Likes
124
Rating
5
P
PrintablesRinoa Lilieu

E26 / E27 edison screw light bulb socket connector fitting

E26/E27 bulb sockets cost $3 to buy, this costs 0.30 cents to print! That's 90% savings to help justify your 3D printer purchase. I found Salvatore's 3D model fit the threads of light bulbs very well, however I wanted a more traditional…

Downloads
1,341
Likes
134
Rating
4.75
P
Printablesgwendal

Vacuum head for MFT and Festool 27mm CLEANTEC hose

Derived from Festool vacuum MFT hood by ggragg , to vacuum while working on the bench. Use a Insta-Dog to attach to the MFT table. Has internal radial pins to connect to the 27mm CLEANTEC hose.

Downloads
1,303
Likes
302
Rating
5
P
Printables2B3D Studio

E27 LED Lamp Kit

E27 LED Lamp Kit A modular lamp designed around a cheap E27 renovation socket. This kit features a single base model paired with three interchangeable lampshade options. The shades in the photos are printed with Bambu PLA Basic Beige.…

Downloads
1,289
Likes
687
Rating
5
P
PrintablesDiablo

K1C (and later K1) adapters to fit my (V2 & V3) 270 degree door front hinges

Adapter plates for allowing K1C and later releases of the K1 to use my 270 degree hinges. ----------------------------------------------------------------------------------------------------------------- These two (small) side panel hinge…

Downloads
1,259
Likes
140
Rating
5
P
PrintablesFeetOffTheTable

Ender 3 V3 SE / KE Logitech Webcam Camera Mount (C270 or similar)

I have taken ALL of the work out of mounting your Logitech C270 to your Ender 3 V3 SE X-axis. You don't need to do ANYTHING other than have this camera (or camera with similar mount), and this Ender, then just print. No hardware? No…

Downloads
1,258
Likes
136
Rating
4.8
P
PrintablesDeLongShot

Pegboard 5-inch/127mm Sandpaper Disc Holder

I liked the idea of this design …but I wanted one with wider and more more slots and would not require supports to print. So, I created this design which has 8 slots to fit standard 5-inch/127mm sanding discs. I made the walls have…

Downloads
1,254
Likes
235
Rating
4.8

Wall E27 lamp holder

This is a working wall lamp holder for E27 socket bulb. Do not use with a voltage higher than 24 volts. Print instructions No need support

Downloads
1,235
Likes
94
Rating
5