Search results: 52

Sort order

2,067 models

P
Printableseds_3d_shop

Filament spool adapter 72mm to 52mm (Sunlu)

+++ Update from 06.06.2022: added the “tight fit” version “Spool_adapter_72mm_to_52mm_tight_fit.stl” (scaled to 101.5% - thanks at SquasherJoe!) for the really tight fit to 72mm Spool. Please check this version and write feedback in…

Downloads
1,769
Likes
70
Rating
4.73
P
Printables3DLabPrint

Cessna 152 based trainer/sport plane

This is just test Gcode, for more info (userguide) please look at: https://3dlabprint.com/shop/cessna-152-based-trainersport-plane/

Downloads
1,158
Likes
146
Rating
4
P
PrintablesMekCreate

Lego inspired Pirate Bicorne (2528pb03)

Just a addon for the Lego Skeleton: https://www.prusaprinters.org/prints/78695-mega-lego-like-skeleton-101-scale I wanted the Lego Bicorne for my skeleton. Did not have the skills to make it myself. So after a long time trying to make it,…

Downloads
1,144
Likes
243
Rating
5
P
PrintablesmoWerk

Radius Gauge 1-30mm | -52,8% Minimal Remix

Minimal remix of @Dingezzz remix of the 1-30mm Radius Gauges by @Restoredoctor. Reduce the filament use of the original model by 52,8% from 225,72 to 106,38 Three prearranged build plates in 3mf and stl format for all tiles with correct…

Downloads
719
Likes
329
Rating
4.94
P
Printablesjlennox

Ridgid R4512 Table saw zero clearance throat plate (R4520?)

This is a zero clearance throat plate for Ridgid R4512 table saws. These may or may not work on R4520 saws? I believe they are the same but I do not own one to verify. Because the print is too large for most printers, it must be printed…

Downloads
360
Likes
52
Rating
0

Articulated mount Ikea Tradfri motion sensor (PIR E1525/E1745)

The 3D printed mount is designed to perfectly fit the Ikea Tradfri motion sensor, ensuring a snug and secure fit. Whether you prefer a more permanent installation with screws or a flexible and removable option with magnet, this 3D printed…

Downloads
316
Likes
42
Rating
5
P
PrintablesIncalculable

Slingshot Zlin 526 AS

This is my slingshot Zlin 526 AS in multicolor. I printed it on a Prusa i3 MK2s MultiMaterial. I printed in PLA, but i do recommend PETG, because its more flexible. Add one (normaly only one is needed!!) M10 Nut into the upper-forward…

Downloads
260
Likes
24
Rating
0
P
Printablesdennis0477

Felgenkappen, Radnabenemblem 50mm Alfa Romeo 145, 146, 147, 156, 166, Spider, GT, MiTo 60652886

Nabeldecken für viele Serienfelgen der Marke Alfa Romeo mit 50mm Durchmesser. Original Artikelnummer: 60652886 Die Embleme gibt es sehr günstig aus China wie z.B AliExpress oder andere Gedruckt in massiv PETG. PLA ging bei mir nicht, da…

Downloads
252
Likes
23
Rating
0
P
PrintablesVixlier

Reolink RLC-1224A RLC-520A junction box

Simple junction box for reolink cameras RLC-1224A and RLC-520A (with included adapter). Square hole at the bottom easily fits crimped rj45 connectors so you can prepare them before installation of the junction box. I've attached the box…

Downloads
232
Likes
19
Rating
5
P
Printablessternli27

Makita DTM52 Tool Box Insert Case Multitool Fein

Designed for Makpac size 2 (155mm height outside) Designed in Onshape https://cad.onshape.com/documents/6c8885acbded4393660dad2f/w/ced976dd821b423d755077ca/e/378dd070d238d2d2863483a9?renderMode=0&uiState=63b16e8f08d58430adbfa920

Downloads
184
Likes
55
Rating
5
P
PrintablesCubeBox391

Tapo C520WS C510W corner mount

Corner mount for tapo camera C520WS C510W I made the model so the camera holes fit in those models, if you need any other size just let me know or remix it. I've also added a PDF with the 1:1 scale of the entire thing, just print it on an…

Downloads
179
Likes
26
Rating
5
P
Printablesdjedje_zr7

Bike phone mount Samsung Galaxy A52/a52S

Juste cut the read red part in picture Sized to fit with phone case get the base support at https://www.printables.com/model/76576-bike-phone-mount-samsung-galaxy-a40

Downloads
154
Likes
12
Rating
5
P
PrintablesMarcin

DSO152 FNIRSI oscilloscope box (120x200)

Many thanks for Yanev for making such a grat box! Hovewer, after trying to customize it to fit FNIRSI DSO152, it occured to me, that minimal height of the bottom and the lid are 15mm each, a little to much for that small oscilloscope. But…

Downloads
148
Likes
31
Rating
5
P

Stand for the Lego Star Wars AT-AT #75288

The large Lego Star Wars AT-AT tends to fall on its side on the first occasion. This stand makes the model more stable. The top includes an opening for the hatch as well as a slit for the string that lifts Luke. The stand's support beams…

Downloads
111
Likes
22
Rating
0
P
PrintablesAleQ

VW Rimcap 52 mm

My car needed new Rim caps. The ones I ordered from Amazon were too big, so I printed my own. They are better, shinier and have the latest VW Logo on them. Let's see how they hold up to the weather. It's a very tight fit! I printed it…

Downloads
97
Likes
15
Rating
0
P
PrintablesdotwinX

Fischertechnik Kugelbahn ball tracks flexprofil 180, copy of 165231

See pictures, I guess PETG is better than PLA, but I would be happy for feedback…

Downloads
95
Likes
10
Rating
0
P
PrintablesTahoma Prints

Cup holder adapter for Peterbilt 520 trucks

https://www.paypal.com/donate/?business=C8C56MQUF7KQ4&no_recurring=0&item_name=Thank+you+for+donating%21+It+helps+me+create+new+projects+and+get+supplies+%26+upgrades.%0A¤cy_code=USD This is an adapter I created for Peterbilt 520 style…

Downloads
94
Likes
5
Rating
0
P
PrintablesM.J. Caboose

152cm (!) Robot from movie A.P.E.X., Painted

I really had to go for it … This bad boy is a filament print of the robot in mutible pices to combine to a 1,5m tall version. This print is done with regular cheap PLA filament since it was intended to be painted from the very beginning.…

Downloads
84
Likes
26
Rating
0
P
PrintablesR.R.

1952-53 Ferrari TIPO 500 F2 Short Nose

Winner, 1952 Grand Prix of Switzerland, driven by Piero Taruffi Piero Taruffi, a native of Rome, studied industrial engineering and showed potential racing motorcycles, but wouldn't achieve success in competition until after World War II.…

Downloads
68
Likes
3
Rating
0
P
PrintablesOmbra

Rivarossi model train 5523 pylon H0

This is a reference pylon for the Rivarossi 5523 model train bridge, to replicate the different ones simply scale it on the X axis. For reference (in Italian):…

Downloads
63
Likes
8
Rating
0
P
PrintablesErikSi

052 Vorsicht: SpielendeZahlen! Winkelmesser 1

Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.

Downloads
52
Likes
9
Rating
0
P
Printableseap6rda

Plantronics 5200 headset adapter for rubber earbud

Design: Adapter designed to mount perfectly to the Plantronics Voyager PLT 5200 headset and to interface with a standard soft in-ear rubber earbud (plug). Design software: FreeCAD Dimensions: envelope is about 10mm long x 6mm diameter.…

Downloads
51
Likes
5
Rating
0
P
PrintablesRhodrigo17

Coffee tamper - 52mm Diameter

coffee tamper for 52mm filter baskets - Like Delonghi home espresso machines. prints well at 0.2, can do finer if you wish to highlight geometry.

Downloads
42
Likes
1
Rating
5
P
PrintablesCodeplayer

12V MK52 heatbed cover

This is a remix of @Boogie created Heatbed cable cover: "A slightly simpler version of the heating bed cable cover with the possibility of tightening the screws for the contacts. For this cover you need a M3x12 screw to mount it." I just…

Downloads
33
Likes
0
Rating
0
P
PrintablesBooks

Gear Mount for PIXMA 2522 Feed Mechanism Gears

Gear mount for the gears of a Canon PIXMA 2522 inkjet printer feed mechanism.

Downloads
32
Likes
4
Rating
0
P
PrintablesFluki

Storage box 4,5L ~ 152oz

Included parts: box width: 145mm length: 145mm height: 250mm volume: 4.5L ~ 152oz lid-18 thickness of 18mm width: 145mm length: 145mm lid-23 thickness of 23mm width: 145mm length: 145mm lid with spoon holder thickness of 25mm width: 145mm…

Downloads
23
Likes
8
Rating
0
P
Printablescalex

Givi TRK52N - E152 removable M6 nut caps

M6 nut-caps to fit your grid's M6 bolts if you want to remove the grid (E152) from the GIVI TRK52N top-case. These nut-caps allow you to remove the grid and keep the holes closed. You can also fit them with a rubber washer to keep water…

Downloads
23
Likes
3
Rating
0
P
PrintablesLayerCake

Supermicro Slim ODD Bay ICY DOCK MB852M2PO-B Adapter

While the ICY DOCK MB852M2PO-B can be mounted with the standard hardware in a Supermicro server, it will have a lot of room to move, this adapter fixes that issue by not using the mounting points on the drive but raising it and mounting…

Downloads
21
Likes
1
Rating
0
P
PrintablesJ

Sparkfun qwiik rfid KIT-15209 box

Box designed for outdoor assembly of sparkfun qwiik KIT-15209 rfid reader. Printed and assembled. I have tried to design this so water that enters the box should not reach the circuit board. Cable is to be pulled thru wall from inside of…

Downloads
17
Likes
2
Rating
0
P
PrintablesGaius Pupus

Box for Socket Wrench Set 52pcs 1/4" plus some place for accesories

I did not use CAD for this model. I used the absolutly “customizable rugged box” and the Prusa Slicer, to to cut the “wiessmann” bit holder in pieces, placing it in the box and merge it to a new model. Great tools if you know hot to use…

Downloads
14
Likes
3
Rating
0
P
PrintablesAdam

Replacement disc for Melissa and Doug Beginner Pattern Blocks (528)

Update [2023-10-20]—I have a model with a full set of replacement blocks, not just the disc: https://www.printables.com/model/620841-replacement-blocks-for-melissa-doug-beginner-patte This is a replacement disc for the Melissa and Doug…

Downloads
13
Likes
5
Rating
0
P
Printables3DDDS

Extended handle for HYUNDAI Silent Compressor 24 Liter - SAC55752

This handle extension allows for an upright posture while pulling the compressor behind you. The handle was printed with PETG and consists of four parts that are joined together using M4 screws and nuts.

Downloads
12
Likes
0
Rating
0
P
PrintablesGuillaumeQ

Narrower internal diameter adapter for Decathlon rear view mirror 520 (ref 8600893)

The Decathlon rear view mirror 520 (ref 8600893) didn't fit my bike (and many people's bikes judging by the product reviews on Decathlon's website) as the internal diameter of my handlebar is narrower than the mounting adapter provided…

Downloads
10
Likes
6
Rating
0
P
Printablesiceshark

SteamDeck Frankendock - SteamClip Anker A8352 Modular Dock REMIX

I Remixed the Steamclip - Steamdeck Attachment System - VESA Attachment by Mike Brumm to create a dock where I could attach my battery my steam deck and my Anker A8352 hub. I borrowed pieces from different sources to create this dock that…

Downloads
10
Likes
4
Rating
0
P
PrintablesJan Urbánek

All infill combinations ISO 527-2 testing specimens

The "group" files (pct) originate from my bachelor's thesis and exclude 35%, 45%, 55%, and 65% (we decided in initial testing that we could skip these). They also exclude Support Cubic, as there is no difference between it and the…

Downloads
9
Likes
2
Rating
0
P
PrintablesKalle

Inrico T522A Stand

Da das Inrico T522 manchmal recht wackelig ist habe ich mir diesen einfache Stand konstruiert. Es wird in die beiden Führung geschoben. Um es einfach zu halten wird an der Schlaufe ein Haushaltsgummi befestigt und einfach nur über den…

Downloads
7
Likes
0
Rating
0
P
PrintablesPitr

Eta 5244 Leone

Prasklý kontakt na nabíjecí stanici. Reklamace neuznaná tak jsem vytvořil vlastní a dávám kdyby měl někdo stéjný problém.

Downloads
3
Likes
0
Rating
0
P
PrintablesBryson

Base insert for Alientek T90B Rugged Case for power brick part number 260526

I had to make a slight modification to fit the power brick that came with my T90B kit. This brick is slightly larger in height and width compared to the one in the original design. I accidentally added a few extra mm in width but it works…

Downloads
2
Likes
0
Rating
0
P
Printablesmmuellerphoto

DIN Rail Bracket - Heat Insert Version - 52.5mm & 62.5mm

This is a Heat Insert Mod of the great DIN Rail Bracket from Fabian. M3 Heat Inserts up to 5.7mm can be used. If you want to create your own mounts for it - hole distance is 52.5mm. I will also publish several mounts I created.…

Downloads
6,076
Likes
538
Rating
5
P
Printablessamwiseg0

ratgdo32, v2.53i, v2.52i, v2.5i, v2.5, & v2.0 PCB Case / Enclosure

Since many of the new Chamberlin/LiftMaster garage door openers do not have removable light covers, including mine, I decided to make an enclosure to prevent any shorts and keep the PCB properly protected. This is an enclosure for the…

Downloads
3,226
Likes
278
Rating
5
P
PrintablesPrintForge

Easy-Thread 72mm to 52mm Spool Adapter for Bambu AMS Lite for Sunlu+Anycubic+Crealty

This spool adapter downsizes a 72mm filament spool bore diameter - Sunlu, Anycubic, Crealty, Hatchbox, et al to fit the Bambu Labs' AMS Lite rotary spool holder. Tested on A1 Mini using default settings for any given layer height and…

Downloads
3,091
Likes
193
Rating
5
P
PrintablesNiffels

motorcycle chain lube thing for 520 chains

Print recommendations: PETG ist most likely the best thanks to it's slight flexibility 0.1mm or 0.15mm layer height recommended due to the small hole the lube goes through 3 perimeters work great. 2 is probably maybe also enough.…

Downloads
2,616
Likes
631
Rating
4.91
P
Printablesjoshua Bentley

RC WHEEL RIM 1:10 SCALE FIFTEEN52 TARMAC 52 X 26 12 MM HEX TAMIYA TT 02 NO SUPPORT RADIO CONTROLLED CAR SUBARU

Hi, I have designed the Fifteen52 Tarmac alloy wheel from scratch in fusion 360 to better suit an rc car, the material (PLA+), the printing process (FDM) and still retain the famous design. The wheel is designed to be printed face down…

Downloads
2,306
Likes
294
Rating
5
P
PrintablesBudwin

New 52 Batman Inspired Helmet

New 52 Batman Inspired Helmet Enjoy Category: 3D Printing

Downloads
2,148
Likes
425
Rating
5
P
Printablesdodasch

SRAM CHAIN GAP ADJUSTMENT TOOL 52 TEETH 12 SPEED

I printed the STL "original" with an Ultimaker 3 Extended in PETG/PLA. You can print the STL "optimized4print" easyer without PVA.

Downloads
2,087
Likes
105
Rating
5
P
PrintablesShakky4711

DC-5521 Connector Housing

Connector housing for DC-5521 / DC5521 low voltage connectors. I did not like that there is no strain relief when attaching cables to the typical DC-5521 connectors you get on eBay or Amazon, so I designed these housings. I left the area…

Downloads
1,759
Likes
899
Rating
5
P
PrintablesMaxT

Christmas Door Trim Corner 52 - Christmas Tree and Merry Christmas (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
1,595
Likes
333
Rating
5
P
PrintablesPTBRB

Phone case for Samsung Galaxy A52/A52s

I redesign the model created by Callan McNamara of a case for the Samsung Galaxy A52 phone. I adjust the cut out for buttons and connectors, tightened the case and proposed an other pattern cut out in it. I tried to print it in flexible…

Downloads
1,556
Likes
98
Rating
4.9
P
PrintablesCADScott

Motorcycle Chain Oiler Block - 520, 525 & 530 Size

This handy tool attaches to the outside of motorcycle chain oil cans, and enables you easily oil the chain with one hand. It splits the oil path from the outlet tube into two and places the oil over the rings where it is supposed to go.…

Downloads
1,429
Likes
195
Rating
5
P

B-52 Stratofortress Kit Card

The B-52 Stratofortress is an American long-range strategic bomber. The B-52 was put into service in 1955 and has remained in service for over 60 years. The USAF projects that it will serve another 30 years before it is retired. Since its…

Downloads
1,339
Likes
299
Rating
5
P
Printablesjoshua Bentley

DEEP DISH STEEL RC WHEEL RIM 1:10 SCALE 52 X 26 12 MM HEX STEELIE SPARE TAMIYA TT 02RADIO CONTROLLED CAR

I made a steel wheel with a deep dish for my tt02. I made these wheel 52mm high, 26mm deep with and of set of ET02 (2mm positive) to suit my Tamiya TT02 and use original tires. The wheel is designed to be printed face up with supports at…

Downloads
1,326
Likes
175
Rating
5
P
Printablesdancan13f

Stand for Lego Millennium Falcon 75257

Stand for the Lego Millennium Falcon (ref. 75257). Glue all parts. RELEASE 09/04/2025 Publishing the files in STEP format for customizing.

Downloads
1,311
Likes
200
Rating
5
P
Printablesidig3D

Extrusion Corner Plate Brackets for 1515, 2020, 2525, 3030, or 4040

Extrusion corner brackets with built-in plates. Short and tall versions for 2020, 3030, and 4040 extruded aluminum -- and now with 2525. Print three of each for each corner. I like to break things down to essential patterns and make…

Downloads
1,300
Likes
284
Rating
5
P
PrintablesZapador

Killflash for EOTech 512/552

Someone asked if it was possible to design and print a killflash for an EOTech so I gave it a shot. There's probably other existing models out there already but it was a fun little project. It works better than I expected and would…

Downloads
1,286
Likes
52
Rating
5
P
PrintablesGustavo

Prusa i3 MK3 & MK2/S frame (MK42/52)

Extruded this from original Prusa DXF files. MK42 = Prusa i3 MK2 and MK2S (frame, Y carriage) MK52 = Prusa i3 MK3 (frame, Y carriage, fronat & rear plate) Looking for ALU extrusions? Look here: https://www.thingiverse.com/thing:2838381…

Downloads
1,077
Likes
66
Rating
0
P
Printablesthall72
Downloads
1,039
Likes
53
Rating
5
P
PrintablesHabit

52mm and 60mm Gauge Pod for Nissan S13 / 180SX / 200SX / 240SX

A simple gauge pod for the Nissan S13 that mounts below the dash. It replaces the oem vent assembly. fits 52mm gauges and 60mm gauges My design is a straight replacement of the oem vent assembly. no cutting, no drilling, 100% reversible.…

Downloads
1,014
Likes
61
Rating
0
P
Printablesverdi

Meshtastic Seeed Studio XIAO nRF52 / SX1262 Case

Tube Case for the Seeed Studio XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html Print Settings: PETG 0.2mm layer 4 walls 15% infill add support on everything…

Downloads
994
Likes
165
Rating
4.5
P
Printablesthall72

Lego Compatible (25269.dat) Tile 1 x 1 Corner Round

This model is compatible with the lego system.

Downloads
947
Likes
46
Rating
5
P
Printablesthall72

Lego Compatible (95225.dat) Minifig Hair Long Wavy with Center Part

This model is compatible with the lego system.

Downloads
946
Likes
62
Rating
5
P
Printablesrreibel

Car Phone Holder - Mini Cooper R50, R52, R53

This is a remix of the excellent Gen #1 (R50, R52 & R53) Mini Cooper phone mount by weber395 (https://www.thingiverse.com/thing:4107581). I wanted a simpler version with a ball mount. fits same as the original, pretty much snaps into…

Downloads
920
Likes
76
Rating
5
P
PrintablesHenningge

DIN EN ISO 527-2 Typ 1B Tensile test / Zugprobe

Bei Fragen gerne Anschreiben, oder wenn ihr mir die Anforderungen für eure Probe schickt, kann ich dazu auch eine fertige Druckdatei hochladen. Für Creo .prt Datei Anschreiben. Die .gcode Datei ganz oben entspricht den Anforderungen der…

Downloads
907
Likes
20
Rating
5
P
PrintablesCallan McNamara

Samsung Galaxy A52s Case

About A snap on case for the Galaxy A52s. I've uploaded versions with and without the back pattern shown in the picture. Made with OpenSCAD, I've included the .scad file in case you want to tweak it. Printing I printed on a Prusa MK3s at…

Downloads
894
Likes
42
Rating
4.75
P
PrintablesV1 Engineering

52mm Spindle Mount for MPCNC Primo

Generic tool mount for most 52mm spindles. Print instructions 45% infill is probably more than enough, 2+ perimeters (1mm+ walls) Fits the MPCNC Primo version only. https://www.v1engineering.com/

Downloads
884
Likes
28
Rating
5
P
Printablesthall72
Downloads
847
Likes
84
Rating
5
P
PrintablesStikkan
18+

The source marked this model as adult content.

Downloads
836
Likes
101
Rating
5
P
PrintablesMaciej Wyrfel

Samsung galaxy A52 5G phone case

Bumper case for Samsung galaxy A52 5G with geometric cut-outs. Approximate walls thicknes ~2.6mm. All necessary holes (for usb socket, microphones, etc) arranged well, button tabs also. Print with TPU filament, layer height 0.15mm (first…

Downloads
835
Likes
57
Rating
5

CZ 452/453/455/457/457/512 .22LR 5 round magazine

A magazine I designed after my factory CZ one. Might require some hand fitting. The spring and follower are steel.

Downloads
797
Likes
33
Rating
0
P
Printablestato_713

Motorola Moto G52 G72 G82 & Edge (2022) xt2205 case

Originally published here: Motorola Moto G72 G82 & Edge (2022) xt2205 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay…

Downloads
790
Likes
34
Rating
4
P
PrintablesSA 3D C&C

Texture Roller ROLL252 - 3D Cookies & Cream

You can scale to suit but at 100% it just works and doesn't use that much filament. 0.15mm layer height using a brim. If you print multiple on 1 bed, make sure your retraction settings are dialed in as it will create multiple artifacts.

Downloads
779
Likes
379
Rating
5
P
PrintablesMekCreate

Lego inspired Epaulettes (2526)

Just a addon for the Lego Skeleton: https://www.prusaprinters.org/prints/78695-mega-lego-like-skeleton-101-scale The real Lego Epaulettes don't fit on a real Lego Skeleton minifig, so had to make it a bit longer, so it will fit the…

Downloads
764
Likes
205
Rating
4.94
P
PrintablesFyrby Additive

Seeed Studio XIAO nRF52840

🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a scale model of the Seeed Studio XIAO nRF52840, which is an Arduino & CircuitPython capable Nordic nRF52840 board with Bluetooth 5, BLE and NFC that comes with an onboard antenna and costs around $9.90. The product…

Downloads
760
Likes
20
Rating
5
P
PrintablesIfrit

rfid box for rc522 and arduino nano

A box to contain an arduino nano connected with a rc522 rfid module. Not Fully satisfy by Dgoma box design ( http://www.thingiverse.com/thing:1413827 ) I decide to make my own. Like Dgoma I could only recommend the Miguelbalboa's work for…

Downloads
758
Likes
54
Rating
5
P
Printablessowa705

52mm lens cap (improved version)

Improved version of my older 52mm lens cap. Prints in just two parts and clips together without screws or springs. Designed for PLA+ filament and requires supports. Print one 1x body with your selected design and 1x spring

Downloads
754
Likes
65
Rating
5
P
PrintablesMichael S

RFID RC522 Cover

Make sure you have everything wired correctly before pushing the cover in, disassembling is a bit tricky, used small tolerances.

Downloads
745
Likes
40
Rating
0

Kamov Ka-52 Aligator

Print your legendary Kamov Ka52 helicopter at home. STL file. Tested.

Downloads
742
Likes
40
Rating
0
P
PrintablesTarz

CZ 457 455 452, Savage Mk II & Anchuztz Magazine Box

1/2/2025 user Jonathan Wolff reported box will also hold Anschutz 10 round magazines 8/21/2024 9/21/2024 Added two Savage labeled lids and one blank lid. 2/22/2024 User reddog kindly advised box will hold Savage MkII 10 round mags.…

Downloads
740
Likes
74
Rating
5

1A - Tensile strength specimen (ISO 527-2)

Model of 1A tensile test specimens according to ISO 527-2 standard.

Downloads
737
Likes
14
Rating
5
P
PrintablesMuffelkraft

Improved Makita LXT 18V Battery Terminal (643852-2)

This 3D printable Makita LXT 18V Battery Terminal is a remixed version of two existing designs, featuring several enhancements for improved usability and compatibility: 3-pin compatibility: Expanded to accommodate 3-pin configurations,…

Downloads
725
Likes
77
Rating
5

52mm gauge mount (central air vent) to fit MK3 golf

This is a gauge mount to fit 52mm gauges into a MK3 golf central air vent. The design replaces the existing air vent and includes a back plate to allow mounting of a variety of different gauges. The back plate has two print in place…

Downloads
720
Likes
67
Rating
5
P
PrintablesSoarpix

JEEP Wrangler - 52 part fully printable

I made this JEEP Wrangler model in Fusion 360 and printed on my Biqu B1. The body, vinsch and rearview mirrors was printed with bed support. Everything else was printed without support. 5mm steel axle L=80mm or use the printable one DON'T…

Downloads
711
Likes
216
Rating
5
P
Printablesthall72

Lego Compatible (32524.dat) Technic Beam 7

This model is compatible with the lego system.

Downloads
709
Likes
53
Rating
0
P
PrintablesDrKronos

Paintbrush Stand, up to 52 brushes

Blender file included. For quickest and most economical printing, set wall count to 1 and 0% infill.

Downloads
683
Likes
123
Rating
4.8
P
PrintablesLee

Pro-micro nicenano nrf52840 dongle case

This case is useful if you have a nice!nano or pro-micro nrf52840 board that you want to use as a keyboard dongle . The lid snaps in place. There are 2 small holes in the case which align with the leds on the supermini pro-micro.

Downloads
673
Likes
35
Rating
5
P
PrintablesKahnindustries

Treecko - Pokemon 252

In honour of Pokemon Go's Treecko Community Day (March 23rd) I have knocked up a Treecko one piece model Needs supports! Print instructions Category: Creatures

Downloads
664
Likes
110
Rating
5
P
PrintablesBryce Ragatz

Supermini Pro Micro nRF52840 Reference Model

Model approximating the budget bluetooth development board

Downloads
648
Likes
22
Rating
0
P
PrintablesJB3Designs

Low Poly B-52

This is a low poly B-52. It is modeled after the static display at the gate of Offutt AFB in Nebraska. Category: Vehicles

Downloads
647
Likes
27
Rating
0
P
PrintablesCoinCorrector

RFID RC522 module case

Hanging brackets made for M3 screws. I recommend having the bridges and supports set up properly beforehand. Added version of bottom piece with screw holes inside.

Downloads
632
Likes
39
Rating
0
P
Printablesthall72

Lego Compatible (2552.dat) Baseplate 32 x 32 Raised with Ramp and Pit

This model is compatible with the lego system.

Downloads
629
Likes
81
Rating
0
P
Printables3DAviator

B-52 Stratofortress

The world-famous US strategic AirForce bomber called the B-52 Stratofortress is borought to you by VualtChaser Settings: Printer: Prusa MK3 Slicer: PrusaSlicer Infill: 5% Retraction: No Nozzle Size: 0.40 Supports: Yes. How to print: To…

Downloads
624
Likes
44
Rating
5
P
PrintablesLiqueseous

Logitech x52 Hotas Desk Clamp

This model is designed to fit on any desk 45mm in thickness or less. The base plate is designed to fit both the stick and the throttle. It attaches to the base of the Hotas via the holes used for the suction cups. The opening for the M3…

Downloads
623
Likes
84
Rating
5
P
PrintablesStanley

Tube Case for Seeed Studio XIAO nRF52840 & Wio-SX1262 (Meshtastic / MeshCore)

A compact tube-style enclosure designed for the Seeed Studio XIAO nRF52840 & Wio‑SX1262 Kit . This case is suitable for portable Meshtastic or MeshCore LoRa nodes , powered by a single 18650 Li-ion battery. The cylindrical design protects…

Downloads
619
Likes
96
Rating
5
P
PrintablesJacyk

Wheels RC 1/10 52x26mm BMW Alpine E21 onroad rally car wheel rim

Hi It is my wheel to rc car. I was inspired by the Alpine BMW E21 wheels. offset 3mm widht 25mm diameter 52mm hex 12mm I recommend printing on the inside

Downloads
612
Likes
100
Rating
5
P
Printablesthall72

Lego Compatible (32952.dat) Brick 1 x 1 x 1.667 with Studs on 1 Side

This model is compatible with the lego system.

Downloads
606
Likes
31
Rating
5
P
Printablesthall72

Lego Compatible (2524.dat) Minifig Backpack Non-Opening

This model is compatible with the lego system.

Downloads
599
Likes
89
Rating
5
P
Printablesthekojent

Baofeng AR-152 Exoskeleton

Cleaned up the AR152 exoskeleton design by Sigint Systems. Internal surfaces are now parametrically defined instead of a boolean subtract of a mesh. This means a cleaner file that needs fewer supports and support blockers to print cleanly.

Downloads
581
Likes
35
Rating
5
P
PrintablesBuildX

#0152 Front Bottom Corner Cable Passthrough Cover

*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** This opening is another source of hot air leakage -…

Downloads
573
Likes
96
Rating
4.96
P
Printablesthall72

Lego Compatible (32523.dat) Technic Beam 3

This model is compatible with the lego system.

Downloads
568
Likes
35
Rating
3
P
PrintablesJohannes

BMW C1 Overload Protection (4652852493)

Overload protection part for BMW C1 stand mechanic See Repository with full history, issues and more: https://github.com/jteiwes/overload_protection Design The design was created from a broken part by measuring and test-printing several…

Downloads
566
Likes
12
Rating
0
P
PrintablesSunny

Lenovo P520 Drive Cage

Hey friends! This model was one of my first ever attempts at 3D modeling. For a better solution, check out this model . For a great model to add even more drives in the optical bay, check out this model . I have created a hard drive cage…

Downloads
556
Likes
29
Rating
0