Search results: 58mm

Sort order

Counting matching models…

P
PrintablesM1Designs

Camera Lens Cap 58mm

Both pieces need supports . It should take less than an hour and a half in total. For the settings keep reading, for the story skip down below. The assemble it make sure all supports are cleared and slide the end without the ridges under…

Downloads
846
Likes
52
Rating
4.5
P
PrintablesIshdo

Esspresso Portafilter Funnel (53mm, 57mm, 58mm)

Portafilter Funnel for espresso machines, comes in multiple sizes. Features: Tamp through Prevents waste (Spill over) Sits properly no magnets needed! Works well in combination with WDT tool Easy to clean Beautiful Print instructions…

Downloads
704
Likes
45
Rating
4.43
P
PrintablesMaWoKo_3D_Druck

Victorinox 58mm Mini

Cover für das Victorinox Mini, lasst bitte einen Like da oder folgt mir für mehr damit ihr nichts Neues Verpasst Danke MazZe_2880

Downloads
92
Likes
17
Rating
0

Coffee Tamping station for 58mm Portafilter, puc and accessories

I purchased a new puc and coffee distributor for my Oster expressor machine. I needed something to hold the portafilter steady without making a mess and also to store it all afterards. This simple print will work for most portafilters…

Downloads
59
Likes
1
Rating
0
P
Printablesredfoxdude

Umikot (58mm Version) - Planetary Gear Spirograph Espresso WDT Tool

WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…

Downloads
25,049
Likes
4,179
Rating
4.95
P
Printablesmodsmthng

blind shaker : donut 58mm 57mm 54mm 51mm 49mm Flair Pro 2 (45.5mm) Flair Classic (Donut espresso shaker / donut espresso shakr)

The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…

Downloads
1,824
Likes
208
Rating
4.91
P
PrintablesGiwi

Canon Lens Hood 58mm

This is a Lens Hood for a 58 mm Canon EOS Lens. Suitable for a focal length from circa 18mm

Downloads
1,152
Likes
118
Rating
4.91
P
PrintablesMarko

Coffee Distributer 58mm

This coffee distribution tool is a copy of the OCD tool, for evenly distributing the coffee before tamping. It is adjustable and I made it so the 3mm screws can lock the internal adjuster/spacer in place. however it doesn't actually need…

Downloads
1,006
Likes
197
Rating
4.94
P
PrintablesS

Espresso Portafilter Basket Funnel (54mm/58mm)

Features No support Minimal filament 5g (54mm) 7g (58mm) Compatibility 54mm (untested) 58mm/58.5mm (tested on Decent Espresso and VST Precision Filter Baskets) Print Settings PrusaSlicer 0.15mm quality with 0.4mm nozzle

Downloads
998
Likes
96
Rating
5
P
PrintablesDennis

ECM 58mm Portafilter Tamping Station

For those of you with ECM Manufacture coffee machines, here's a model of a tamping station or stand for your standard or naked portafilters. Best to do it in ABS or PETG as PLA may melt with a hot portafilter.

Downloads
969
Likes
105
Rating
5
P
Printablesdynmic

Tamping station for Lelit 58mm portafilter (+ Umikot compatible version)

A tamping station compatible with Lelit 58mm portafilters (PLA580*) for the Lelit Glenda and similar espresso machines. There are two versions, one is a simple tamping station with slots for the ears of the portafilter and the other is…

Downloads
739
Likes
78
Rating
5
P
PrintablesMdL

3D-Printed Coffee Distributor – 53mm & 58mm (Sizes)

This is a 3D model of a coffee distributor tool, perfect for ensuring an even and consistent tamp in your portafilter. The model supports both 53mm and 58mm sizes to fit different espresso machines. To assemble this model, you’ll need…

Downloads
730
Likes
213
Rating
5
P
PrintablesThael

Chess Figure Set Dubrovnik [Kingsize 3.86"] - mod easy-to-print [for a board with 58mmx58mm fieldsize]

Chess Dubrovnik Set - mod easy to print Kingsize 3.86" (for a board with 58mmx58mm fieldsize) Chess #Dubrovnik #Staunton /////////////////////////////////////////////////////////////////////////////// The set - except of the knight - is a…

Downloads
691
Likes
57
Rating
4.89
P
PrintablesBemko

Niche Zero portafilter holder for Sage/Breville/La Marzocco 58mm

Niche Zero holder for Sage/Breville or La Marzocco 58mm portafilter. Designed to stylistically match the grinder while still seamlessly integrating the stock dosing cup and holder. It is an elegant way to grind directly into a portafilter…

Downloads
656
Likes
38
Rating
5
P
PrintablesJan K.

E61 / 58mm Portafilter Wall Mount

This is a Wallmount for your typical E61 Portafilter for the efficient organization of your Espresso stuff. Disclaimer: The original thing was shared by jimhigson on thingiverse under CC BY-NC 4.0 . I did reupload this to complete my the…

Downloads
632
Likes
62
Rating
4.86
P
PrintablesJeffery Wang

58mm Lens cap

This is a simple lens cover that works with lens hoods. There are two versions to the latch (58mm lens grip); v2 has a slightly deeper hold and slightly more aggressive teeth. I recommend printing the grip pieces at 99% scale width so…

Downloads
613
Likes
37
Rating
4.8
P
PrintablesDemokan

Magnetic Espresso Dosing Funnel 58mm

Please print with food safe filament like PETG. Matching neodym magnets: Shape: disc Diameter (D) 5mm Height (H) 5mm Tolerances +/-0.1 mm May not fit to all VST-Baskets. Please check the outer diameter, should less or near 70mm. (see…

Downloads
613
Likes
70
Rating
4.78
P
PrintablesPat

58mm portafilter funnel

58mm portafilter funnel with a 15mm funnel wall. I found that 15mm was the right height to prevent grounds spilling while breaking up clumps without being too intrusive under the grinder. The slots should fit most portafilters, if they…

Downloads
599
Likes
59
Rating
4.88
P
Printablesbykim

Espresso Puck Screen Holder Stand for 58mm Portafilter

Stand or holder for your puck screens generally sized for 58mm portafilters. This was sized specifically for the Flair58 puck screens although may work for other puck screens of similar size. Flair58 pucks screens measure at 58.4mm dia…

Downloads
579
Likes
62
Rating
5
P
Printablesjstiles

58mm (E61) Espresso Accessory Station

Printing Any material should be fine --it's not designed to hold food items or be subjected to heat/pressure. I used PETG, but that was to match the filament I used for the tamping stand and portafilter dosing funnel, which are subjected…

Downloads
569
Likes
113
Rating
4.67
P
PrintablesMatt Boyer

58mm Lens Cap Holder

A belt buckle style lens cap holder w/ a color change at the top. Holds my DSLR kit lens perfectly. Edit December 12, 2022: The standard version accommodates a 1.575" strap. I included a new version to fit 2.00" wide straps.

Downloads
552
Likes
187
Rating
5
P
PrintablesCougarAries

Smooth Spinning Spirographic WDT for 54mm & 58mm Portafilters

WDT (Weiss Distribution Technique) is a method of espresso preparation to evenly distribute coffee grounds in a portafilter to ensure a more even extraction of coffee from the espresso machine. This tool uses several needles spinning in a…

Downloads
479
Likes
75
Rating
4.83
P
PrintablesDutchWorkX3D

X3D Riser Lite 58mm high

Check my FB group if you need more info after reading below. Again a riser but this time one which is in line with the outer lines of the machine. I have tested it with the X1C and the P1S and glass fits perfect. You will need 4 top…

Downloads
466
Likes
86
Rating
4.5
P

Gaggia Classic 58mm Portafilter Stand Tamp Station

Heavily inspired by rotf101's tamping-station (but created from scratch) - see "model origin" for link. I made this for my bottomless portafilter that come with my 2nd hand machine. I have a shades of coffee wooden handle that I fitted to…

Downloads
457
Likes
35
Rating
4.63
P
PrintablesLowres

Victorinox Knife Scales 58mm Swiss Army

Victorinox Rambler Knife Scales 58mm Beta testing: Also added scales that can hold two toothpicks per scale, because of the angles the tools do not fit flush. Category: Tools

Downloads
452
Likes
63
Rating
5
P
Printablespatta

Thread adapters M42 : T2, camera filter 52mm 55mm 58mm

Here I start dumping the 100+ STL of screw thread adapters that I've made for the Telecentric project Waiting for the famed OpenScad “universal adapter” Maybe I'll put them all here. Start with some M42: Camera mount thread M42x 1 adapter…

Downloads
422
Likes
38
Rating
5
P
Printables1g0rb

Swiss army knife 58mm scales

Special feature is a scale with two slots for both tweezers and toothpick and optionally a side slot for a pin/needle (useful for removing SIM cards for example). An addition is a pen scale which requires pen and plastic part from…

Downloads
412
Likes
83
Rating
5
P
PrintablesJCVB

Extra slim Camera Lens Filter Case (77mm, 67mm, 58mm, 52mm, 45mm)

A extra slim lens/photography filter case with magnets (6x2mm). Fits 77mm, 67mm, 58mm, 52mm and 45mm Filters. 92mm x 87mm x 10mm Maximum filter thickness 7mm

Downloads
385
Likes
87
Rating
5
P
Printablese1miran

Filter Mount System for iPhone 17 Pro and 17 Pro Max - 58mm & 67mm

Do you need to attach a ND filter to your iPhone 17 Pro or Pro Max? Here's a solution. A total of 10 magnets are required. Magnets should be 10mm x 2mm . Glue magnets into each of the 5 depressions on both the base plate and filter ring.…

Downloads
383
Likes
61
Rating
5
P
Printablesnielsie645

Gaggia Classic Pro water reservoir cover with 58mm tamper holder

A replacement water reservoir cover with a place for two 58mm or 58.5mm tampers. For the Gaggia Classic Pro. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200 Infill: 15%, doesn't really matter…

Downloads
377
Likes
64
Rating
5
P
PrintablesBurf

No-Mess Dosing and WDT Funnel for 58mm Baskets

A funnel with a small lip that wraps around the edge of 58mm baskets to help prevent grounds from getting trapped between the funnel and the basket during aggressive WDT, and eventually ending up on your counter. The lip is small enough…

Downloads
359
Likes
32
Rating
5
P
PrintablesMatze H.

Magnetic 58mm Portafilter Funnel (Gaggia Classic, E61, ECM, Lelit, Bezzera)

I made a new magnetic funnel for my portafilters. I own a Bezzera BZ10 (used to own a Gaggia Classic) and an open basket portafilter with an IMS B702TH26.5M basket. The Outer Diameter is about 70mm for my portafilter. The E61 variant has…

Downloads
356
Likes
45
Rating
4.5
P
Printablesfelixna

Rocket Espresso 58mm E61 Tamping Station

This is a tamping station for Rocket Espresso 58mm (E61) portafilters. It allows you to tamp with one hand with single-, double- or bottomless portafilter. I printed it in PETG and fuzzy skin which gives it a cool look. I designed it with…

Downloads
355
Likes
32
Rating
5
P
Printablesgdrag

58mm magnetic espresso dosing funnel

This funnel has an outer lip and uses 16 magnets (4mm diameter, 2mm height) to hold onto the portafilter basket. It prints upside down without supports. Should fit most 58mm baskets. The bottom lip has a 70.2mm clearance, with a 58mm…

Downloads
343
Likes
52
Rating
5
P
PrintablesFilmTeam

58mm Canon lens front cap

Hi, I was in need for a few lens caps and as I didn't have any I modelled them. And after few iterations I got them working quite well. Enjoy and protect your lenses! Cap is a print-in-place model, so a good tolerance is needed Supports:…

Downloads
328
Likes
26
Rating
5
P
Printablesmattus

Umikot base gaggia classic evo 58mm

I printed it with generic PETG 0.2mm layer height. Printing upside down (threads facing bed) does not need supports. Dimensions Height: 23 mm Spacing between tabs: 23.5 mm

Downloads
313
Likes
36
Rating
4
P
PrintablesMikhail Gordin

Skadis pegboard bottle holder (t-nut mounting; 37mm, 45mm, 50mm, 58mm bottle sizes)

Bottle holders for Ikea Skadis pegboard using the t-nut mounting system . See that link for how to use t-nuts. These holder has interior diameters of 37mm, 45mm, 50mm, and 58mm. These are similar to the Skadis Bottle Holder - T-Nuts…

Downloads
296
Likes
30
Rating
5
P
PrintablesSimo

df54 blind shaker mount 58mm + 54mm (MHW-3Bomber)

printed in pla-cf Orca slicer about 1hr print time 0.2 layer hight 2 walls 4 top & bottom shells 20% infill gyroid

Downloads
292
Likes
15
Rating
5
P
Printablesbykim

Espresso Portafilter Filter Paper Holder 55mm 58mm

Holder for paper used in espresso making. Comes in two sizes one for 55mm paper and another for 58mm paper and two heights. Update 8/18/2023: added holder for 58mm paper and taller options

Downloads
282
Likes
25
Rating
5
P
PrintablesVger1981

Victorinox Classic 58mm scales

Use a 3,2mm drill bit with a flat tip to clean the holes for a better fit. Scales should snap-on without a glue.

Downloads
278
Likes
49
Rating
2
P
PrintablesRJ Tan

Victorinox 58mm Scales

Victorinox 58mm scales with slot for pen, tweezer, toothpick and 2 pins/needle. One more slot is available for toothpick based tool.

Downloads
277
Likes
26
Rating
0
P

Qidi Plus 4 55-58mm Adapters

Qidi 4 plus stock spool holder adapter. More sizes to fit non-standard spools. Please see attached image. Print in PLA or any filament, infill any (I used 50% adaptive cubic) 55mm to fit Hatchbox, Funflag 57mm to fit Sunlu, Zyltech,…

Downloads
271
Likes
25
Rating
0
P
PrintablesPhunXter

Nikon lens hood AF-S 70-300mm 58mm

Two types of lens hoods to fit Nikon AF-S 70-300mm or any other Nikon 58mm lenses Category: Camera

Downloads
260
Likes
27
Rating
0
P
PrintablesFred.call

Lens cap holder 49mm-58mm-72mm

Voici un lens cap holder, qui permet d'y clipser ces bouchons d'objectifs d'appareil photo. Très pratique car il s'adapte à la sangle canon par exemple. Les diamètres de bouchons acceptés sont 49mm pour le plus petit, 58mm pour le second…

Downloads
244
Likes
52
Rating
4.67
P
PrintablesYT

Umikot - Thick Spin Ring 58mm and 54mm

This is a remix of @redfoxdude_386759 Umikot - Planetary Gear Spirograph Espresso WDT Tool Love the original design, which look great and work perfectly, thanks again for the amazing design and hard work. But after use it for few days, I…

Downloads
240
Likes
24
Rating
5
P
PrintablesLucas

58mm Filter Adaptor for GoPro Mission 1 (with Threads!)

There are two versions, with and without threads. I recommend printing with a .12mm layer height, this should allow the threads to print without a problem. If you have issues with the threads printing, use the other model without threads.…

Downloads
238
Likes
8
Rating
0
P
Printablessacrilegor

Coffee funnel for 58mm portafilter (Rancilio Silvia + Rocky)

This easy to print funnel distributes the coffee at max level of an 58mm basket. For my Rancilio basket it seems to be optimal, but for other filter baskets my not be good. Advised to print in PETG, but if you do not preheat the…

Downloads
237
Likes
29
Rating
4.5
P
PrintablesHorstelin

Umikot (58mm Version) V2 Quick Mill Base

I changed the 22mm base to work with my quick mill portafilter: -removed deep pocket since the basket lip is very thin -added 3 lugs (instead of 4) for needle protection

Downloads
220
Likes
26
Rating
4.5
P
PrintablesPenguinNinja

Bokeh lens filter (fits over a 58mm lens)

This is an attachment for a bokeh filter. It fits over a 58mm lens. I designed the base free to rotate, so that I can make bokeh images in the background rotate also. Each filter slides into the top of the base. I have 17 pre-made filter…

Downloads
219
Likes
47
Rating
5
P
Printablestples

Breville Sage 58mm portafilter holder for Skadis

Let's be honest, if we are in the hobby of espresso and 3d printing, we love tinkering with our equipment. Maybe even more if we have a breville dual boiler planning or have done a “slayer” mod to it. I think that the white skådis holder…

Downloads
214
Likes
20
Rating
4
P
Printablesgareth.ky

58mm Magnetic Dosing Ring/Funnel

Modeled on a VST basket and refined through about 7 prototypes, this is the dosing ring that I actually use every day. Magnetic so it clings to the basket. Magnets actually just touch the basket for a good hold. Accurately modeled on a…

Downloads
213
Likes
23
Rating
5
P
PrintablesShowStudio

Espresso 58mm Tamper Stand & Tamping station V2

Small indent on bottom face for adhesive feet. Should print fine if you're printer can handle overhangs

Downloads
210
Likes
20
Rating
0
P
Printablesnielsie645

Gaggia Classic Pro water reservoir cover with hinged lid and 58mm tamper holder

25/02/2026 - It's been 4 years, but I've finally removed the rogue part from the underside of the model and updated the page. Apologies to anyone affected. Upgraded version of my original water reservoir cover for the Gaggia Classic Pro .…

Downloads
205
Likes
29
Rating
4.5

PortaFilter Holder 58mm

A Portafilter Holder that fits different 58mm Portafilters and helps with a double sticky tape. it fits the different thicknesses of filters for that reason it won't be 100% but will hold the Portafilter well. Print Instruction 0.1 Layer…

Downloads
195
Likes
17
Rating
0
P
PrintablesPOD3D

58mm Portafilter Holder

This is a portafilter holder designed specifically for 58mm Rocket Espresso brand. Due to single spout portafilters as well as double spouts it can be problematic to tamp without stability so I made these. They can be used to store the…

Downloads
190
Likes
38
Rating
5
P
Printablesmchangcreative

Option-O LAGOM casa 58mm portafilter holder

March 17 update : I've uploaded a reworked base design that I think is more aesthetically pleasing. See the first two photos in the image carousel. You can now build a holder to your preferences: more appealing Mark 2 base original Mark 1…

Downloads
189
Likes
14
Rating
5
P
Printablesfhessel

Tamper Station for Sage Dual Boiler (58mm)

The holder can take the portafilters for one or two cups and holds both in a vertical position. I printed in PETG, but other materials like PLA should also work. No special print settings (like supports) are required.

Downloads
189
Likes
22
Rating
5
P
PrintablesBgnome

58mm Dosing cup for Breville (Sage) Oracle

A simpler option for those interested, this dosing cup lets you use the built-in grinder of the Breville (Sage) Oracle without having the portafilter locked in. This allows you to prepare your puck without using the auto-tamp feature, so…

Downloads
181
Likes
7
Rating
3
P
PrintablesEttil Vrye

58mm Coffee Dosing Cup for Sage/Breville Dose Control Pro Grinder / Smart Grinder Pro

This is a simple dosing cup for the Sage (or Breville) Dose Control Pro or Smart Control Pro coffee grinder and fits in its 58mm portafilter-holder and the portafilter itself without making a mess. It can be printed in PLA without any…

Downloads
181
Likes
21
Rating
0
P
Printablessamuel_gabl

58mm Portafilter Holder | Siebträger Halterung | Wandhalterung

This 3d printed portafilter holder for 58mm portafilers is designed to be mounted on your kitchen wall with 4mm bolts

Downloads
169
Likes
8
Rating
0
P
Printablesaplyard

Magnetic Coffee Funnel 58mm V3

Magnetic Coffee Funnel 58mm Update of https://www.printables.com/model/628761-magnetic-coffee-funnel-58mm -Made thinner -Magnets are now 3x1mm (Neodymium Disks) This is magnetic coffee funnel for 58mm baskets. Print Settings Printer…

Downloads
167
Likes
12
Rating
0
P
PrintablesPaulharmo

58mm Portafilter Puck Screen Holder - 2 Slots

Bykim's V2 puck screen holder, but shortened to be more compact and hold only 2 puck screens.

Downloads
167
Likes
12
Rating
5

E61 / 58mm double portafilter wallmount

I have two portafilters and wanted to mount them with one rack and with less material than the original. I removed excess material and put 2 of them in line and I think 2 screws are enough for a secure mount You can use upto 4,5mm screws…

Downloads
165
Likes
19
Rating
5
P
Printables3Daemon

Umikot 58mm Mechanism and Spin Ring modified to receive M3 HEATSET INSERTS

In this mod, the short Mech is V2 modified to receive 4x m3 heatset inserts. The Spin Ring V2 is modified to receive 1x m3 heatset inserts. This avoids the need to directly thread M3x12 into plastic. Direct-thread M3s are…

Downloads
164
Likes
25
Rating
5
P
Printablespandax

Niche Zero portafilter holder for Lelit 58mm

Inspired by Bemko, I did a similar support for my portafilter. It's not the same design, as he didn't share STEP file and I had to make a new one from scratch, but it keeps the same function and design (vaguely). To be placed under the…

Downloads
164
Likes
13
Rating
5
P
Printablesstance

Lamarzocco 58mm portafilter stand

Another design for lamarzocco 58mm portafilter. La Marzocco 58 mm filter holder support for tamping without having to place the filter holder on the work surface. Certainly works with other filter holders but I haven't tried them.

Downloads
163
Likes
30
Rating
3
P
PrintablesEntropy4U

Normcore 58mm Portafilter Holder for Gaggia Classic

Normcore 58mm Portafilter Holder for Gaggia Classic. Better for drop packing than more minimalist holders. I've included a pretty decent estimation of the PF itself

Downloads
162
Likes
13
Rating
3.5
P
PrintablesDave

SAK 58mm scales

No glue, precise fit. 58mm is the small, maybe most common and Swiss Army Knife. Just pop off the original sides and snap in your own printed one. This is the first model I made to learn the process end to end, with an ode in design to…

Downloads
159
Likes
11
Rating
0
P
PrintablesReme Le Hane

Easy Print Dosing Cup (58mm)

Simple to print dosing cup that requires no support. Took about 90min to print with a 0,6mm nozzle on my Biqu B1

Downloads
159
Likes
11
Rating
0
P
PrintablesK3D-Works

iPhone 16 Pro 58mm Lens Filter Mount Adapter

Description: This 3D printable adapter is designed specifically for the iPhone 16 Pro, allowing you to attach standard 58mm lens filters to your device. Perfect for photographers and videographers who want to enhance their mobile…

Downloads
158
Likes
23
Rating
5
P
PrintablesJan K.

E61 / 58mm Portafilter Basket Wall Mount

Do you like this design and want to give a Tip for it? Do it here This is a Wall Mount for 58mm Portafilter Baskets, that are mainly known from E61 brewing groups. I would advise you to use (opt. food-save) PETG, since it's not…

Downloads
158
Likes
13
Rating
4.5
P
PrintablesGoodBoi

Breville/Sage Smart Grinder 58mm Dosing Funnel

A no-mess dosing funnel for use with Breville/Sage Smart Grinder and 58mm Portafilter. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: Generic Anything Foodsafe Any…

Downloads
158
Likes
10
Rating
0
P
PrintablesPixxelSnake

Focus Gear Ring | 58mm - 69mm | 24 sizes

For our old Zeiss lens set, I created focus rings in different sizes. So this is a selection from 58mm inner diameter of the ring to 69mm in 0.5mm increments. (2,28 inch to 2,72 inch) Measured is the inner diameter that has contact to the…

Downloads
154
Likes
23
Rating
0
P
PrintablesLoogle

Single Shot (7 - 9 g) Dosing Funnel and Tamper for 58mm VST and LM Baskets

Description Single shots are useful if you need to limit your caffeine intake, want coffee more frequently without increasing caffeine intake, or just like the taste of single shots. Whatevery the reason, single shots can be tricky to…

Downloads
154
Likes
16
Rating
5
P
PrintablesNathanJ7C

58mm Espresso Tamper Stand (Version 2)

Small indent on bottom face for adhesive feet. Should print fine if you're printer can handle overhangs

Downloads
153
Likes
26
Rating
5
P
PrintablesOskait

58mm Cup Holder for Jaapps Smart-Grind-By-Weight mod for Eureka Mignon

This is my take at a 58mm Cup Holder for the Smart-Grind-By-Weight mod by jaapp (https://github.com/jaapp/smart-grind-by-weight) The cup fits nice and securely, leaving enough clearance. The cup holder slides over the load cell and screws…

Downloads
151
Likes
10
Rating
5
P
PrintablesKevin

DF64 Gen 2 58mm Portafilter Holder

Hold 58mm portafilter on a DF64 Gen 2 grinder, may work on a Gen 1 but not sure. This was designed specifically off of my bottomless Normcore portafilter and Normcore dosing ring, but it may work with other combinations of different brand…

Downloads
151
Likes
7
Rating
0
P
PrintablesVousaty_

58mm dosing funnel

58mm dosing funnel

Downloads
150
Likes
10
Rating
0
P
PrintablesTeo Vasilev

Coffee Tamper (51mm ; 58mm)

I don't know if all machines are standardized measure it this one is for diameter 51mm 58mm

Downloads
148
Likes
17
Rating
0
P
PrintablesR&D

Canon Lens Hood 58mm - straight wall, textured

A lense hood to cover sunshine from your lense. Gives a bit more contrast to photos. I want to mention the fact that at 18mm focal length this hood will cause vignette! Meant to be used as a telephoto hood. Personally i use it mainly when…

Downloads
146
Likes
12
Rating
0
P
PrintablesNathanJ7C

58mm Portafilter Puck Screen Holder

Holds most 58mm Puck Screens

Downloads
146
Likes
11
Rating
5
P
PrintablesThespianMask

Lens Filter Step Up Ring (39mm to 58mm) - TTArtisan AF 27mm f/2.8

This is a step up ring that adapts 39mm lens filter threads to 58mm. The TTArtisan AF 27mm f/2.8 uses the odd 39mm thread, and I wasn't willing to hunt down and buy another CPL filter, so I want ahead and designed my own. This is printed…

Downloads
146
Likes
12
Rating
5
P
PrintablesLVMRCreations

Espresso Portafilter Holder (58mm)

I needed a holder for my 58mm portafilter holder for weighing and other purposes, so I created this rather than purchase an expensive (and unnecessary) metal one. Also works with naked portafilter (which took a little work because the…

Downloads
142
Likes
11
Rating
5
P
PrintablesObachtEtzi

Elegant 58mm Espresso Tamping/Tamper Station & Barista Tool Organizer

I designed this tamping and accessories station to bring some order and style to my espresso workflow, specifically for use with my 58mm bottomless portafilter . This organizer solves the problem of a cluttered counter by providing a…

Downloads
141
Likes
28
Rating
4
P
Printablesagabr

Breville 58mm Bottomless Portafilter Tamping Stand

This is a stand I designed for the Breville 58mm Bottomless portafilter so it is easier to tamp it. Category: Kitchen & Dining BE SURE TO PRINT WITH FOOD-SAFE MATERIALS AND A FOOD-SAFE NOZZLE LIKE STAINLESS STEEL

Downloads
139
Likes
22
Rating
0
P
PrintablesjohnP

Baratza Sette 270 Dosing Cup Holder + Dosing Cup 58mm Gaggia

remix of the amazing arhodes9 model. I printed the cup with tree support straight up.

Downloads
138
Likes
14
Rating
0
P
PrintablesTommy1972

58mm Lens adaptor to 52mm

To mont a 58mm filter on lens 52mm. (Canon RF 35mm f/1.8 IS STM Macro) Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: .1 Infill: 0.2 Filament: prusament PLA Black Category: Camera

Downloads
137
Likes
9
Rating
0
P
PrintablesTom_Ash

Gaggia Classic Pro E61 58mm portafilter locking base.

Base for 24mm long tabs. With a stand for it.

Downloads
137
Likes
32
Rating
5
P
PrintablesChris

Simple 58mm Portafilter funnel

This is a simple funnel for 58mm Filters. Hold in place, shake and be lucky ;)

Downloads
136
Likes
8
Rating
5
P
PrintablesJosh Cook

Magnetic 58mm Dosing Ring

Dosing ring to suit 58mm portafilter baskets Uses 8 press fit 6x3mm magnets

Downloads
135
Likes
10
Rating
5
P
Printablesbrettvitaz

Rancilio Silvia 58mm Portafilter Funnel

In a video on espresso dosing by my new favorite YouTuber James Hoffman , he showed how a portafilter funnel can help with the distribution of grounds. I did a quick search on Thingiverse to find such an item to print, but the search Gods…

Downloads
135
Likes
10
Rating
5
P
Printablesrickrpm

58mm espresso coffee portafilter funnel for 7gr single shot VST type filter and 41mm tamper guide.

This saves time preparing a 7 grams filter on a 58mm portafilter. Coffee is funneled into the center of the filter and a guide lines up your 41mm tamper straight into the coffee. I just tap the entire portafilter to settle the coffee…

Downloads
132
Likes
15
Rating
5
P
PrintablesGrrr

Espresso 58mm Basket Organizer

Introducing my 5-basket espresso filter organizer! Enjoy the flexibility of vertical or horizontal storage – keep it stylishly displayed or neatly tucked away. I designed the back to be open for two reasons: easy access for everyone…

Downloads
131
Likes
19
Rating
5
P
PrintablesJan K.

E61 / 58mm Tamper Wall Mount

Do you like this design and want to give a Tip for it? Do it here This is a Wall Mount for a 58.55mm Tamper that you probably use for your espresso machine, it it's a E61 one. It was custom made for the Lelit Tamper, that came with my…

Downloads
131
Likes
18
Rating
5
P
PrintablesMacNeill

Canon DSLR Lens Cap Holder 58mm

As I was taking pictures I wondered, where to put the lens cap of my camera. I thought that there had to be a place for it and so I designed this part. I also designed a 1/4 inch screw to fix it at the camera. When the lens cap is…

Downloads
131
Likes
42
Rating
5
P
PrintablesThe Slunktator

58mm to 55mm Step Up Ring

58mm (Female) to 55mm (Male) Step Up Ring for attaching a 58mm filter to a 55mm lens. Used Ratasich's model for the 55mm threads and ThespianMasks' model for the 58mm threads. Made 2 models: No grip (just round) Grip (for ease of…

Downloads
129
Likes
8
Rating
0
P
Printablesmickael59b

GUITAR PICKS 0.58MM LISSE ABS

Matériel: ABS Produit taille: 30*26*0.58mm/1.2*1 * 0.02in Convient pour guitare, basse ou ukulélé joueurs

Downloads
126
Likes
8
Rating
0
P
Printablesblechbude

Filterdose 58mm Filter Filterbox Fotofilterbox photographic filter box

Dose zum schrauben für Fotofilter mit 58 mm Durchmesser. Die Dose hat innen einen Durchmesser von 64 mm und eine freie Höhe von 12 mm. Eventuell innen mit Schaumgummi oder Velour auskleiden damit der Filter nicht klappert. Gedruckt mit…

Downloads
122
Likes
37
Rating
5
P
Printablessiemai

Tamperstation (58mm)

Kaffee-Tamperstation – Praktisch, stabil und stilvoll! Diese Kaffee-Tamperstation ist der perfekte Helfer für alle, die ihren Espresso professionell zubereiten möchten. Sie bietet eine stabile und rutschfeste Unterlage für deinen Tamper…

Downloads
121
Likes
9
Rating
5
P
PrintablesJakub Gahér

58mm porta filter funel - 3 ears

Didnt find funnel to do the job without magnec as i did not have any so i make this for my HiBREW H10A. Aded small lip to the inside so the coffe ground would not spill out. No magnets

Downloads
121
Likes
9
Rating
5