Search results: 8s

Sort order

440 models

P
PrintablesJKM

THRUSTMASTER - TH8S Shifter Add-On

New Thrustmaster TH8S gear lever Variations: TH8Sss1 v1 - no screw needed, just fold and push TH8Sss1 v2 - push, use screw, put part 3 on and then part 2 No supports. Perimeter: 5 Material: PET-G Layer: 0.1mm TH8Sss3 - thread printing,…

Print approx. €2.98–€3.65 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
600
Likes
12
Rating
0
P
PrintablesMatt G

Mec-Gar P18 38S Base Plate Extension

I've always wanted base bigger base plates for my RIA 51679, but certain companies that provide them are wishy washy on if they will fit this particular magwell. Plus they are expensive. This one fits the magwell and adds no additional…

Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant

Downloads
103
Likes
5
Rating
0
P
Printables8to6tech

8s Balancer base (flying capacitor balancer)

Decided to make this to reduce the chances of screws coming loose and flying around the 280ah diy house batteries in my skoolie. yes the balancer is potted but can never be too safe, right? initial print is 2 sidewalls, 2 top and 2 bottom…

Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant

Downloads
19
Likes
0
Rating
0

Flashforge Adventurer 5M (AD5M) Filament Cutter - compatible with DIY enclosure when using my Design8Studio drag chain termination v1.1

CAVEATS Before you download this or try it: I get a fair amount of reports of issues with this particular listing, especially when used with one of my minimal enclosure remixes. For example, this warning from fellow maker Eric Morneau : I…

Downloads
5,921
Likes
973
Rating
4.74
P
PrintablesHexiBase

HexiBox Series: Tang Band W5-1138SMF / Dayton Audio DMA80-8 2.1 Backpack Speaker

As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.

Downloads
1,576
Likes
244
Rating
0
P
PrintablesThrustmaster

THRUSTMASTER : TH8S Shifter Accessories

Security Please follow the mounting instructions in PDF to replace plates and knobs Customize at your own risks ! Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability , add : 7…

Downloads
1,463
Likes
127
Rating
4.83
P
PrintablesNelsonClark

Makita charger flat wall mount for DC18RC, DC18SD, DC18SH

A simple flat mount for the most common Makita chargers on the market, no need to try and line things up like with the single foot models or like the dual tilted ones. This model is easy to print and easy to use. To install charger, screw…

Downloads
1,228
Likes
97
Rating
4.9
P
PrintablesRobertoooo

Guition ESP32-S3-4848S040 EU wall mount

This is a wall mount for Guition ESP32-S3-4848S040 ESP32-S3 based touch screen, which can be purchased without the relay base. The relay base doesn't fit in a standard 60mm diameter appliance wall box, so if one doesn't really need the…

Downloads
977
Likes
53
Rating
0
P
Printablesmarcusone

Sunton ESP32S3 8048s043c 4.3" Screen Case

Sunton ESP32S3 8048s043c 4.3" Screen Case https://www.aliexpress.com/item/1005004788147691.html?spm=a2g0o.order_list.order_list_main.21.51981802EHw6b4 Using OpenHASP https://www.openhasp.com/0.6.3/ For the back to screw on, I used M2x12…

Downloads
887
Likes
29
Rating
5
P
PrintablesThrustmaster

THRUSTMASTER : Official TH8S Gear knob files

There are 3 files available on this page : 1/ The DESIGN PIECE is the most important one. You must use it as the base to design your own knob that fits around the piece. 2/ The ADAPTATER is the part needed to mount your knob on the…

Downloads
742
Likes
46
Rating
4.67
P
PrintablesVanix

CYD 3.5" Case - esp32-3248S035

Case for "CYD 3.5" capacitive touch. (ESP32-3248S035C) Display and case on one level. For example: https://de.aliexpress.com/item/1005005928255980.html?spm=a2g0o.order_list.order_list_main.11.4a535c5fYamG2U&gatewayAdapt=glo2deu Fits the…

Downloads
734
Likes
52
Rating
4.75
P

Dübel d6-D8x39 8Stück

Dübel d6-D8x39 8Stück Ich empfehle PETG und 100% Füllgrad. Der seitlich angebrachte “Flügel” ( Verdrehsicherung ) gehört beim Druck natürlich nach unten. Bei Verwendung von ABS, PC oder Nylon kann es zu Warping beziehungsweise…

Downloads
720
Likes
107
Rating
4.67
P
PrintablesagentSam

Thrustmaster TH8S Shift Knob Adapter

Added a V2 which provides a much better fit on the shaft than my first version. I've also extended the lip as it tore off on the first version.

Downloads
601
Likes
44
Rating
5
P

Dübel d8-D10x49 8Stück

Dübel d8-D10x49 8Stück Ich empfehle PETG und 100% Füllgrad. Der seitlich angebrachte “Flügel” ( Verdrehsicherung ) gehört beim Druck natürlich nach unten. Bei Verwendung von ABS, PC oder Nylon kann es zu Warping beziehungsweise…

Downloads
561
Likes
67
Rating
5
P
PrintablesMegaAndy

Guition 4 inch Screen Frame and Stand (ESP32-S3-4848S040)

Version 2 update: Version 2 of the frame has some notches to click the frame into the rear section. This is a snug fit that snaps into place and is difficult to remove it again but will pull apart without damaging. Version 2 of the…

Downloads
477
Likes
221
Rating
0
P
Printablesjeepers01

ESP32 5inch Touch IPS LCD Screen Case for 8048S050

ESP32 5inch Touch IPS LCD Screen Case I recently purchase this screen from Ali Express. ESP32-S3 HMI 8M PSRAM 16M Flash Arduino LVGL WIFI&Bluetooth 5 " IPS 800*480 Smart Display Screen 5.0 inch RGB LCD TFT Module. It's a gorgeous 800 x…

Downloads
463
Likes
34
Rating
5
P
Printableskiklhorn

ESP32-8048S070 N/C case

ESP32-8048S070 N/C case

Downloads
439
Likes
23
Rating
5
P
Printableslayershifter

Bosch GCM8SJL circular saw vacuum hose adapter 50 and 40mm (screw-in)

Update 2019-06: v2 with improved clip flaps. Looking for a way to connect my non-Bosch workshop vacuum to the GCM8 SJL miter saw I came across Ruperts design, which looked appealing but was angled, which I did not need and which is…

Downloads
360
Likes
43
Rating
5
P
PrintablesAlfem

Box for Sunton esp32-3248S035 board

I have got this amazing and cheap (<20€) board sporting an esp32, 3.5 TFT, multicolor LED, SD-card reader and many connectors for audio, sensors... But it is a development board, and unfortunately a nice enclosure was not available. As I…

Downloads
348
Likes
15
Rating
5
P
PrintablesGoldTownRacing

Darts Holder for 8Sets

Darts Holder for 8 Sets

Downloads
346
Likes
22
Rating
5
P
PrintablesCle4tle

E38S6G5 type incremental rotary encoder mount

Compatible with M3*8 screws with a spring washer and washer. Uses M3 screws for every hole I printed mine without supports or rafts. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter…

Downloads
328
Likes
10
Rating
5
P
PrintablesMichal Schwarz

Wall frame for 3.5" LCD TFT touch display "ESP32-3248S035"

Frame The frame is as small as possible while maintaining at least a partial symmetry and some space for the wall mount. It can be printed face down without any supports or a brim, but the wall mount will need to be printed diagonally…

Downloads
324
Likes
19
Rating
0
P
Printablespoprhythm

Makita Battery Charger DC18SD Mount - Pegboard and Wall

The DC18SD is slightly smaller than the DC18RC, so this adaptation will fit this model. Insert the top peg at an angle first, and then push in the bottom two support pegs. You may want to add a screw into the pegboard for extra support.…

Downloads
323
Likes
35
Rating
4.75
P
PrintablesJXC

Makita DC18SD Wall Mount

Flush mounting for Makita DC18SD charger. One of the sides has pin holes that are not straight up and down, so I decided to cant the screwholes relative to the mount, so you end up with the smallest possible mount, but also have vertical…

Downloads
320
Likes
38
Rating
0
P
Printablesgzilli

ESP32 Capacitive Touch Screen Module Case [ESP32-3248S035C]

ESP32 Capacitive Touch Screen Module Case [ESP32-3248S035C]

Downloads
315
Likes
22
Rating
0
P

TP-Link TL-SG108S-M2 10-inch Rack Mount

A 10-inch rack mount for the TP-Link TL-SG108S-M2 2.5G switch. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . I have added a .3MF project file as well. Do you like my models?…

Downloads
313
Likes
39
Rating
5
P
PrintablesNonSkittles

shift knob for th8s(no adapter needed)

So i modeled a shifter knob for thrustmasters new th8s shifter i noticed that there was none of these on the internet, i only found adapters and almost none shifters that fit on the adapters, so i decited to make my own it just slots into…

Downloads
287
Likes
19
Rating
0
P

Case Gauge Funnel 9mm/38sc

Case Gauge Funnel for Shockbottle 9x19 and 38SC 100 Round Case Gauge The funnel alternates the height of the peaks and valleys to encourage the rounds to tip into the channel. The “Stanley Cup” version features giant carry handles for…

Downloads
281
Likes
28
Rating
5
P
PrintablesCrypto

Stand for the Guition Esp32s3 4848S040 4-inch

I've been using jtenniswood's project for making easy LCD control panels (https://jtenniswood.github.io/espcontrol/).

Downloads
279
Likes
23
Rating
5
P
Printablesmatthew lim

Timemore 078s Dial Indicator

Designed this as changing grind settings on the timemore 078s can be subjective from where you look at the indicator, hopefully this will make it easier and more consistent to set the dial

Downloads
257
Likes
14
Rating
5
P
PrintablesKampflafer

Timemore Sculptor 078s tumbler spacer

The spacer aligns itself through 2 10x3mm magnets like the original dosing cup. The height with spacer is the same as the original. Magnets are held in by glue. .sted File is included

Downloads
251
Likes
23
Rating
3
P
PrintablesMakeNick

Audi TT 8S mobile phone holder for center console

I've been looking for a mobile phone holder for my Audi TT 8S for a long time that fits under the switches for ESP etc. The holder should be somewhat flexible with a clamp in the size of the cell phones that fit. After a few test prints,…

Downloads
248
Likes
14
Rating
5
P
PrintablesKampflafer

Timemore 078s 078 knocker assist.

The ring gets press fitted on the knurled part of the rotating knocker. You may need to scale it up or down a few % to get the fitment right.

Downloads
247
Likes
24
Rating
5
P
Printablesmarkusdd

Sunton 7inch Display Housing (ESP32-8048S070) with rounded corners

Like the original, but faceplate with rounded corners and even frame width

Downloads
242
Likes
10
Rating
0
P
PrintablesJ Cee

Timemore sculptor 078/078s hopper with flow feed

These designs take a lot of time and experimentation to get right, but I still keep it free to download. If you enjoy the model and want to contribute to my next bag of coffee, it would be appreciated :) I made this because my attempts at…

Downloads
241
Likes
17
Rating
5
P
PrintablesSarah Matthies

Guiton 4” 480x480 ESP32-S3-4848S040 Smart Display Case Wallmount

This is a simple casing for the Guiton 4” 480x480 ESP32-S3-4848S040 Smart Display. The display fits just right with additional space at the back to place battery. The USB C connector is still reachable for easy charging.

Downloads
234
Likes
19
Rating
0
P
PrintablesNicholas

Cobra 90 – Thrustmaster TH8S Shifter Knob + Adapter

Give your sim-racing setup a cobra-inspired shifter knob with a flared hood, detailed scales, a segmented belly and sculpted fangs. Cobra 90 has a shortened neck and a widened grip surrounding the mounting socket. The scale detail…

Downloads
227
Likes
63
Rating
5
P
PrintablesJKM

THRUSTMASTER – TH8S Sequential Shifter (+/-)

accessories for sequential ordering attach the bottom plate add pins add rubber bands according to the required strength screw the top part 4x M4 print: material PETG perimeter 4 layer height 0.1mm filling 15% gyroid supports no old model:

Downloads
224
Likes
17
Rating
0
P
PrintablesWesEubanks

Meshtastic UHF HT. Heltec V3 Baofeng BF888S.

Parts Needed: - Baofeng BF888S UHF HT - Heltec V3 - M3 x 30mm Allen screws and nuts - Some soldering required

Downloads
224
Likes
47
Rating
0
P
Printablesstah

Dillon Case drop 9mm / .223 / 38Spec / 357 Mag

Standard replacement parts. 9mm (Dillon green), .223 (Dillon white) .38spec/357Mag (Dillon orange) Update 1: SHORT version redesigned to be more stable when using machine without case feeder. Update 2: Added version for GolluB Case Feeder…

Downloads
217
Likes
14
Rating
0
P
PrintablesStefanN

Sunton 7inch Display Housing (ESP32-8048S070) with Stand (FreeCAD)

The original design is great, but I wanted some enhancements. Because the STL showed some faults after importing into CAD, I decided to re-draw the whole model. On the Frontframe, the mounting holes for the Sunton display got M3…

Downloads
217
Likes
5
Rating
0

Pistol Holder Display Stand 9mm 38spl

This is a display stand for your pew pew's I would go 100% on the infill if you want it to last.

Downloads
212
Likes
20
Rating
0
P
PrintablesDjdogscute

Thrustmaster TH8S shift knob adapter to m12 size

you should print this with supports and the infill density doesnt matter to much but also dont change the scale from what I have for it to fit. This is small and only takes 5 grams of fillament and it works on the Thrustmaster TH8S shifter.

Downloads
208
Likes
13
Rating
0
P
PrintablesChrisHerman

CYD 3.5" Case - esp32-3248S035 with clips

the 0.6mm clips hold the PCB in place so you do not need screws. The back cover is unchanged from the original. It already snapped in place without screws. I printed on a Creality K1 with 0.4mm nozzle and 0.2mm layer hight.

Downloads
202
Likes
17
Rating
0
P
Printablesuepsie

suction cup mount for DS18B20/DS18S20 temperature sensors (Aquarium)

This is an aquarium (or other glass surfaces) mount for temperatur sensors DS18B20 / DS18S20 (6x50mm). the sensor just snaps into the mount and there you go. you need two suction cups (small ones) like the EHEIM 6803…

Downloads
201
Likes
22
Rating
4
P
PrintablesKos Kos

Case for 4S/8S Gloyuda 15ah 33140 LiFePO4 battery

Case for 4S/8S Gloyuda 15ah 33140 LiFePO4 battery The case provides space for a BMC and an active balancer (if desired) BMC and balancer are mounted on double-sided adhesive tape Screw holes are 3mm У корпусі передбачено місце під БМС і…

Downloads
197
Likes
24
Rating
0
P
PrintablesHiRez99

Futaba R7008SB receiver Holder

Futaba R7008SB receiver Holder Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 35% Filament: Tesla Filament PLA RED Category: 3D Printing

Downloads
192
Likes
6
Rating
0
P
PrintablesJulianB

Sunton 7inch Display Housing (ESP32-8048S070)

This is a case for the Sunton 7" display [1]. I only used it for the non touch version, so i could be that it doesn't fit with the touch version of the display. You need 4xM3x8 screews and 4xM3 nuts. Just press the nuts into the Frame. It…

Downloads
180
Likes
8
Rating
5
P
PrintablesPrinter

Extended Battery Tray for Arrma Outcast 8S

This model is for the left side. Use your slicer's mirror function to replicate for the right side. I recommend using an impact-resistant filament like PETG, PC, or nylon. Print with supports. High wall count and high infill. This design…

Downloads
180
Likes
13
Rating
0
P
PrintablesHells

Realistic Skull Shifter Knob – Thrustmaster TH8S & Logitech RS H-Shifter

Realistic Skull Shifter Knob – Thrustmaster TH8S A human skull from a real medical CT scan, with the official TH8S threaded insert built in. It screws straight onto the stock adapter, and the face points forward once tightened. Size: 53 ×…

Downloads
178
Likes
59
Rating
5
P
PrintablesSebastianDruckt

osVAC Adapter M32-Bosch GCM8SJL

Adapter to fit the Bosch Professional GCM8SJL to the osVAC platform. Remix of original Thing ID 3734911. Fitting to the osVAC M32 connector 4671596 and therefore can be used with the complete osVAC setup. I printed it with PLA and it…

Downloads
176
Likes
22
Rating
4
P
PrintablesJager

Case for Guition 4848S040 4"

The case consists of two parts, which are attached to each other using 8 magnets 6x3mm. The adapter can be used as a standalone case for mounting the display on a metal surface. No support is required when printing.

Downloads
173
Likes
15
Rating
5
P

LEGO 1953 Siata 208S Spider

LEGO 1953 Siata 208S Spider

Downloads
169
Likes
38
Rating
0
P
Printablesneedtofish

Futaba R7008SB Receiver Tray

This does require supports.

Downloads
162
Likes
9
Rating
5
P
PrintablesYTSIO

Makita wall mount for charger DC18SF

We sell printed units, please contact us : [email protected] or visit our website/webshop: http://www.ytsio.nl Keep your workspace tidy with Makita wall mount for charger DC18SF. I print them with PETG; 6 wall; 6 top/bottom; 25% Gyroid…

Downloads
157
Likes
15
Rating
0
P
Printablesjoh

Bosch GCM8SJL circular saw vacuum hose adapter for Miele

Based on layershifter's adapter , remixed in Tinkercad. If you want to customize it, head over to Tinkercad :)

Downloads
155
Likes
28
Rating
5
P
Printablesdnagpal

Snow Joe - Handle Lock - Original part ION18SB-9

Snow Joe snow blower has a plastic join between the handles and that part is highly prone to getting snapped. It is out of stock on their website for months now so I designed this as a replacement. Print horizontally (vertical print is…

Downloads
155
Likes
5
Rating
3
P
PrintablesJ Cee

Timemore sculptor 078/078s hopper with flow feed - Zerno style

These designs take a lot of time and experimentation to get right, but I still keep it free to download. If you enjoy the model and want to contribute to my next bag of coffee, it would be appreciated :) Same basic hopper internally as…

Downloads
152
Likes
16
Rating
0
P
PrintablesRob

Turntable with variable steps (2038steps)

150mm Turntable with variable steps (2038steps) and browser interface How to use You can either use the browser interface by simply pressing the buttons and setting the steps, or you can connect a push button to move the stepper motor.…

Downloads
152
Likes
24
Rating
5
P
Printablesthe_ress

Yamaha HS5 and HS8S logo cover

Cover to hide the bright logo on Yamaha HS5, HS8S (and possibly others) PETG, 0.2mm layers, use supports I printed it with matte black PETG. F3D file is included (suppress the last extrude to get the HS8S model).

Downloads
150
Likes
20
Rating
5

Skadis T-Nut Mount for Makita DC18SD

This model does not fit DC18RC Pull out rubber feet from the bottom of the charger and mount brackets into holes. To mount brackets you'll need both T-Nuts and alignment guides, which you can find here:…

Downloads
149
Likes
23
Rating
5
P
PrintablesR B

Makita DC18SD wall mount

Makita charger DC18SD wall mount.

Downloads
149
Likes
9
Rating
5
P
PrintablesHelheim

Sunton ESP32S3 8048S050C 5.0" Screen Case

Sunton ESP32S3 8048S050C 5.0" Screen Case https://www.aliexpress.com/item/1005004952694042.html I printed in PETG. All credit for the original design goes to marcusone

Downloads
140
Likes
9
Rating
0
P
PrintablesSmily0

Cobra 18S Slat Quickplug Cover

I really liked the Cobra 18S quickplug base and snappable cover, but wanted to ability to customize for easy identification in the field. I often borrow from buddies, as well as lend out my own equipment, and this makes it very easy to…

Downloads
138
Likes
7
Rating
0

Makita charger DC18SH wall mount simpel

Makita charger DC18SH wall mount simpel is a wall mount for your charger. Remove rubber feet, and push the hoder i place. You kan just let it hang or remove the skrew and put a new through the mount. Its pre-drilled. Print Settings…

Downloads
131
Likes
8
Rating
5
P
PrintablesAdamox716

THRUSTMASTER TH8S SHORTSHIFTER MOD

NOZZLE TEMP: 230 BED TEMP: 70 BED PLATE: PEI LAYER HEIGHT: 0.2 AMOUNT OF RAFT LAYERS: 3 MAX PRINT SPEED: 150 MM/S FIRST LAYER SPEED: 50 MM/S ACCELERATION: 2500 MM/S2 MATERIAL: PLA INFILL: 25% COOLING FIRST LAYER: OFF COOLING OTHER LAYERS:…

Downloads
130
Likes
10
Rating
0
P
PrintablesMarco64

Display enclosure for 7 inch ESP32-8048S070C touchscreen display

This is an enclosure for the relatively cheap 7 inch touch display with an embedded ESP32-S3 processor. I use it on a stand to have a dashboard for my home battery system setup. But you can also mount it on the wall in any orientation you…

Downloads
128
Likes
8
Rating
5
P
PrintablesUrbanpirate

Thrustmaster TH8S screw clamp replacement

Made a replacement for the TH8S shifter screw clamp. Included a .step file of the project in case anybody wants to tinker with the design.

Downloads
126
Likes
12
Rating
5
P
PrintablesPureDeath

Kraton 8s Roof Skid guard

Standard height and Tall roof skid guards for the stock Kraton 8s body. I recommend a hard durable plastic. You do not need supports, it prints perfect with out them. Print Settings Supports: No Notes: you don't need supports Category:…

Downloads
126
Likes
11
Rating
0
P
PrintablesRod Danesh

Wasteland Piston Skull – Shifter Knob for Thrustmaster TH8S

Every wasteland war machine needs a gear knob forged from its own engine. This knob turns a classic engine piston into a snarling skull: three ring grooves on the crown, the wrist-pin bore through the side, and a skull face carved into…

Downloads
124
Likes
38
Rating
0
P
PrintablesDante

Solar Filter - Celestron 8SE

This project has been on my list for a while and this contest motivated me to get it done. This is a solar filter for a Celestron NexStar 8SE for viewing and taking pictures of the sun. The glass can be picked up through Amazon for $10 at…

Downloads
124
Likes
23
Rating
5
P
PrintablesRasmus

Makita charger mount for DC18SD charger

Holder for Makita DC18SD charger. mounts with 4 screws. the charger can be taken on and off without tools.

Downloads
124
Likes
10
Rating
5
P
PrintablesFLECHE FPV

BALANCE SAVER 4, 6 and 8S (V1.01 - 2025_09_13)

4 models in 4, 6 and 8S version.

Downloads
121
Likes
12
Rating
0
P
PrintablesBoo_Ray

Arrma 1/5 kraton,outcast 8s rear arm

Two versions of rear arms.. -I recommend atleast 3 or 4mm walls/bottom/tops with vertical printing.. For best durability make 100%infill.. This is rear right arm. For left arm - mirror this part. It is a perfect fit. -it doesnt have holes…

Downloads
121
Likes
20
Rating
0
P
Printablesrrauenza

Bhatinov Filter for Celestron 8se

Bhatinov filter for Celestron 8se. Prints in two pieces and snaps together. Print both pieces with supports. Print Settings Rafts: No Supports: Yes Resolution: 0.30 Infill: 25% Category: Sport & Outdoors

Downloads
117
Likes
9
Rating
0
P
PrintablesBuckBuck

Timemore Sculptor 078s Hopper

Key points taller hopper with steeper angle which prevents the beans from sticking to surface (especially when spraying with water) anti-popcorn that allows to hot start and dump all beans at once with open cover use original top cover…

Downloads
116
Likes
12
Rating
0

Audi TT mk3 8S phone holder

Audi TT mk3 8S phone holder

Downloads
116
Likes
4
Rating
5
P
PrintablesSteve

TH8S extended G7 Block + R lock

Extension of G7 Block to help shift to 6th and lockout Reverse. STL has some extra bevels from photo to make in install easier.

Downloads
114
Likes
8
Rating
5
P
PrintablesSilverBullet126

SCX6 - Castle Mamba Monster X 8S - Mounts

A Castle Creations Mamba Monster X 8S for the SCX6. This is meant to match up with my receiver box ( here ) and be used with the new 3Brothers RC Black Jacket motors. There's both a lengthwise (LW) and width wise (WW) mount; choose as you…

Downloads
114
Likes
4
Rating
0
P
Printablesmdshw5

Tang Band W5-1138SMF passive radiator micro subwoofer

A few years ago I made a small, poorly made box for a Tang Band W5-1138SMF 5 1/4" subwoofer plus two 6 1/2" radiators. It worked and sounded alright but now that I have developed better CAD skills and understand the modifications I wanted…

Downloads
110
Likes
11
Rating
0
P
Printablessshman

Thrustmaster TH8A/TH8S short throw knob (colorful remix)

I've done a couple of changes since the original model: Made it a bit shorter (doesn't affect the overall length as the thread is in the same place). Split the model into 3 to print the middle part in a different color.

Downloads
104
Likes
20
Rating
0
P
PrintablesD4rk Helmet

Makita DC18SD mountingbracket

Small brackets to mount a Makita DC18SD charger to a wall. Do this one by one for each mountingbracket remove the rubber You need to remove the original case screws put the bracket replace the original screw with a 4mm x 50mm countersunk…

Downloads
104
Likes
13
Rating
0
P
PrintablesLoogle

Sculptor 078s Incremental/Vernier Indicator

Description: My Sculptor 078s gets moved back and forth between drip and espresso range quite a bit and I was having trouble getting back to exactly where it was previously. Not anymore! Stock “step size” according to Timemore is 28 μm…

Downloads
104
Likes
19
Rating
5
P
PrintablesSteve

Thrustmaster Clip in TH8S Short Shift

Model includes some clips on 3-4 throw to hold in place. Simply take gear knob off to install. With the existing throw mechanism the throw can't be made much shorter otherwise it may bounce out of gear. With the slightly shorter gear…

Downloads
103
Likes
8
Rating
0

JST XH Housing/Male (1S to 8S)

from me: printer: Bambu labs p1s filament: esun pla silk print profile: 0.8mm extra fine + outer brim UPDATE 21/11/18 correct shape and size for foolproof notch exported set 1S to 8S 19/11/18 files names were inverted There was no JST-XHP…

Downloads
103
Likes
5
Rating
0
P
PrintablesBitSpirit

Baofeng BF-888S

3D scan of Baofeng BF-888S

Downloads
97
Likes
6
Rating
0
P
Printablescyborgxxl

8S LiFePo4 Active Balancer Case

Designed it for my 8S LiFePo4 Active Balancer for my 24V LiFePo4 battery bank.

Downloads
97
Likes
11
Rating
0
P
Printableslclab

Ventilated THRUSTMASTER TH8S Shifter Knob (S, M & L)

An ergonomic, ventilated knob for the THRUSTMASTER® TH8S shifter in the sizes small, medium (recommended) and large. Check also my DRIFT Knob for the THRUSTMASTER® TH8S Shifter . Please don't scale the parts: The thread and the fits are…

Downloads
95
Likes
66
Rating
5
P
PrintablesMeesterEd

Apple watch band holder by as2008schl REMIXED

I took Apple watch band holder by as2008schl and merged all of the modular bits in to one 5 slotted holder meant to be mounted with double sided tape. The ones on the left are 42mm and the right are 38mm and both fit nicely. These were…

Downloads
92
Likes
6
Rating
5
P
PrintablesMenga

Wallmount for Makita DC18SD Charger

Print on the side. Support for the pins are a must, for the holes it isn't necessary. The holes for the anchor screws are 3.7mm, meant for 6mm Fischer wall plugs (Drywall or brick)

Downloads
91
Likes
2
Rating
5
P
PrintablesNonSkittles

Mini Shiftknob for TH8S

A mini shift knob for thrustmaster th8s its print in place model that doesent need any screws or anything, just pop off the printer and use it fits snugly on the saft, so just push it on and play no supports i used brim, no need to use it…

Downloads
89
Likes
5
Rating
5
P
PrintablesAAME

ISDT BG-8S TPU Cover

Simple cover for ISDT BG-8S mode of TPU http://www.isdt.co/bg-8s.html http://aame.work/2017/11/05/isdt-bg-8s-tpu-cover/ Print instructions Category: Hobby Summary Simple cover for ISDT BG-8S mode of TPU http://www.isdt.co/bg-8s.html…

Downloads
84
Likes
4
Rating
5
P
PrintablesBoo_Ray

Arrma 1/5 kraton,outcast 8s front arm

This is a rough model of front arm for kraton 8s. I haven't tested it! For rear arms I had best results while printing it at 45deg angle with ABS plus and high temps.. Arm held for normal bashing and some big jumps - but failed at landing…

Downloads
83
Likes
16
Rating
0
P
PrintablesMáté Kancsal

Euro Shift Icons Thrustmaster TH8S Shifter Knobs

I modelled the shift knobs of the best european cars so you don't have to! I hope it will make your sim racing journey more immersive.😊 The bundle contains 12 shift knobs some of them needs glue to assemble. Pictures of printed examples…

Downloads
82
Likes
34
Rating
0
P
PrintablesRaptor_50_Titan

The Poolcleaner Turbine ONLY - PVXH038SA

Fixed - Correct file has been uploaded. 08/19/2023 This is a replacement drive gear for the Hayward The PoolCleaner 2 Wheel Suction Cleaner. This may also fit the 4 wheel version also. Turbine Hub with (6) Vanes - PVXH038SA This is #2 on…

Downloads
81
Likes
5
Rating
0
P
PrintablesPandalism

10in Mini Rack Adapter for TP-Link TL-SG108S

Part of my wider “Pndlsm's MiniRack” series, here is a mini rack adapter (10 inch width) for tp-link 8 port switches. Design uses Hex grating of 8mm edge to edge and 2mm thickness throughout Should give a satisfying and loud click when…

Downloads
80
Likes
14
Rating
0
P
Printablesmarkusdruckt

FreeCAD Files for THRUSTMASTER TH8S Gear knob (+STL)

FreeCAD file for official THRUSTMASTER TH8S gear knob files. Change "MainBody" object to your desire and/or add custom extensions.

Downloads
79
Likes
18
Rating
0
P
Printables3dprintkings

Audi TT (FV/8S Facelift)

please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings recommended to do a color change by script at height 3.50mm and use a prime pillar Category: Keychains

Downloads
79
Likes
13
Rating
0
P
PrintablesIberGoku

Botao de Câmbio Personalizado PRUSA Thrustmaster TH8S Shifter

Botao de Câmbio Personalizado PRUSA Thrustmaster TH8S Shifter

Downloads
78
Likes
79
Rating
0
P
Printables3DrehDruck

R18SDS Wall Mount

I printed with a 0.6 Nozzle and 0.3 Layerheight. Hope this will help one or two people ^^

Downloads
78
Likes
5
Rating
4