34,533 models
This adapter allows you to use Meta Quest 2 head straps on the Quest 3. Instructions: Download under ‘model files’ and print with supports. Enjoy Haydn Bao Design notes: From v4 to v5, the geometry updates are minor. There's just a few…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
Update V2: I completely rebuilt the Duplo connector. I changed three things of the original "Minimalist Duplo - Brio, IKEA, Wooden Train adapter" with Tinkercad in order to fit my needs: I reduced the inside height of the Duplo connector…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
Minimalist Duplo - Brio, IKEA, Wooden Train adapter that you can use for connecting Duplo bricks with wooden train tracks to make bridges and slopes. The peg on the outside is modified a bit so it fits on a Duplo brick too. Print with…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
SSD or HDD adapter from 3.5" to 2.5" drive. You are going to need 4 countersunk screw M3x6mm for mounting drive to the 3D print If your drive needs the connectors to be in the same position as those on a 3.5-inch drive, it won't be…
Print approx. €1.46–€1.79 excl. taxPreliminary estimate for one variant
Hi guys, after the disaster of ordering the M2-M3 BoboVR conversion kit today I decided to do a quick and dirty remix this great Quest 3 to Quest 2 Head Strap adapter by HB. (Many Thanks) It's far from perfect. USB cable has to go in back…
Print approx. €1.79–€2.18 excl. taxPreliminary estimate for one variant
Allows you to use a 3.5 in HDD hot-swap bay with your more popular 2.5 in SSDs. ****Edit*** I added two new files v2, I rounded off the edges I think it looks nicer. ****Edit*** I've added a Riser so you can easily use the more readily…
Print approx. €2.98–€3.64 excl. taxPreliminary estimate for one variant
Overview: Does not slip, even under decent pulling force Fits poles with a diameter of 6-~16mm Ring for securing the plant has a diameter of ~25mm Uses very little material I needed a clip to secure my tomatoes to a stick, but all the…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Had to print using 2mm raft to stick on build plate. Print with thicker side of the model upward shown in photo, no supports needed. May require some strands to be cleaned up when done printing. You can find adapters on Amazon but why not…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Based on the fantastic spectra cartridge designed by James Tipton, I've modified it to take full cartridges of film and fit a little more snugly, removing the most tricky aspect of reloading my spectra. Required Materials: Conductive…
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
This battery adapter is used in multiple of my other designs. For Makita 18V Batteries, see my design here: https://www.printables.com/model/436132/ For Milwaukee M18 Batteries, see my design here:…
Print approx. €4.30–€5.26 excl. taxPreliminary estimate for one variant
Prints PETG in 0.2mm layer height with no supports, a 5mm brim around adapter helps with bed adhesion. This is suitable for use with Sharpie fine point pens. Print upright with thin part of the adapter touching the build plate. No…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
Information: The width of the adaptor where chain pass is around 10 mm. Print settings: Step: 0.3 Shell: 3 Infill: 30% Supports: No Filament: PLA
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
I designed this piece to mount IKEA SKÅDIS boards onto a wall using regular screws. The board does come with screws and a mounting bracket, but I was looking for a more flexible solution: with this adapter you can mount the board on…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
There are surely simpler adapters to be fair, but this one can fine-adjust the way the camera looks into the lenses, to get the best picture quality. NOTE: This is model was more a personal project, I just decided to share. The tolerances…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
For my new Eurotronic Spirit smart radiator valves I needed a clean and easy adapter. There are many adapters out there that are quite bulky, couldn't figure out why that would be necessary... So designed my own in a few minutes. My…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Prints PETG in 0.2mm layer height with no supports, a 5mm brim around adapter helps with bed adhesion. This is suitable for use with Stabilo 0.4mm fine pens. Print upright with thin part of the adapter touching the build plate. No…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
A universal adapter to hold a Parkside PAP 20 A1 (Lidl) battery. You can add holes in Prusaslicer 2.4+ or in any other software to connect it to the machine. No supports needed. Feel free to tell me for improvements.
Print approx. €2.88–€3.53 excl. taxPreliminary estimate for PETGSource material: PET
I didn't like the weight of the spool on top of my printer any more So I designed an adaptor to use the original spool holder that came with my MK3, which adapts it to mount on the side of the printer. An easy print part, I printed mine…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for PETGSource material: PET
Joe3020 fitted an adapter for 10MM bearings for Overture cardboard spool, I remixed it to work on most spool holders. This adapter to insert into certain cardboard spools to reduce the amount of cardboard dust from spinning against the…
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET
Smart holder adaptér držák vychází z originálu, který byl modifikován pro sportovní sedadla vozidel značky Škoda, včetně pojistky proti vyndaní pokud je vložen držák multimédií ;) postup: tisk z PET-G (z důvodu vysokých teplot ve voze v…
Print approx. €3.90–€4.76 excl. taxPreliminary estimate for PETGSource material: PET
This adapter converts 4" Drain/Waste/Vent PVC pipe to 4" flexible dust collection hose . My previous adapter was a two piece that needed to be epoxied together, which resulted in me seldom using it because I didn't want to break out the…
Print approx. €4.85–€5.93 excl. taxPreliminary estimate for PETGSource material: PET
This battery adapter is used in multiple of my other designs. For Bosch 18V Professional Batteries, see my design here: https://www.printables.com/model/427974/ For Milwaukee M18 Batteries, see my design here:…
Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant
01.12.2024: Added a version without the logo as requested as well as a step file so you can add custom logos if you want to. I created this model in order to use my phone with a QuadLock Mount I bought. It just goes on the back of a…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET
Parkside battery adapter for Ryobi tool. Mixed two pieces of work together, I admit that. Did some modifications so they fit together. You need to print: 1x top 1x bottom 2x clip And extra: 4x 6.3mm Faston male crimp connector, "blue"…
Print approx. €6.42–€7.85 excl. taxPreliminary estimate for one variant
Here is my own interpretation of the razorback form The Expanse. The model is design at 1:30 and mesure around 67 centimeter height but designed to be undersized until 34 % size without issues (1:90 scale - 23 cm height). It can be…
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for one variant
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for PETGSource material: PET
Smart holder adaptér !!!POZOR - pouze pro Colorprint!!! držák vychází z originálu, který byl modifikován pro sportovní sedadla vozidel značky Škoda, včetně pojistky proti vyndaní pokud je vložen držák multimédií ;) postup: vložit model a…
Print approx. €5.10–€6.23 excl. taxPreliminary estimate for PETGSource material: PET
Slim cans or "sleek" cans do not fit well in all cup holders. This adapter has a flexible design to work well in a wide range of vehicles. I have tested in multiple vehicles without any issues. Print using a material that won't melt in a…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for PETGSource material: PET
This adapter allows you to rack (19") network elements of the TP-Link manufacturer, more precisely the OMADA business range. Unfortunately the manufacturer has not planned to be able to rack this equipment via holes and brackets, many…
Print approx. €3.18–€3.88 excl. taxPreliminary estimate for PETGSource material: PET
Airsoft Adapter from M12 CCW to M14 CCW
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
This small adapter is a quick solution to use PC4-M6 fittings instead of PC4-M10 fittings. I printed them in PLA because PETG is unfortunately too soft and you can screw them into the M10 thread with an 11mm wrench. Print Settings Rafts:…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
A slightly completed version and slightly corrected dimensions. (Remix from https://www.thingiverse.com/thing:5167475) This type of adapter can be used for small currents not exceeding a few amps. Maximum about 4 A. Use only with real…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
PC4-M10 adapter for the MMU3. Remix of vertigo235's great adapter for the MMU2. Prints perfectly fine without supports @ 0.2mm layer height.
Print approx. €1.34–€1.63 excl. taxPreliminary estimate for PETGSource material: PET
A 12mm CW to 14 CCW threaded adapter for fitting a tracer unit or mock suppressor on an airsoft gun.
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
If you have a camera capable of taking 220 roll film you can use it to expose a full roll of 35mm film using the adaptors in this print. I've tried other 3D-printed adaptors but none worked in my Hasselblad A24 magazines, which is why I…
Print approx. €1.56–€1.90 excl. taxPreliminary estimate for PETGSource material: PET
Compatible with standard garden hose fittings Mounting plate with holes for secure attachment to wood with zip-ties, screws or any other method Included broom stick adapter for attaching to broomstick shaft or anything similar. (use…
Print approx. €3.09–€3.78 excl. taxPreliminary estimate for one variant
Adapter um ein Homematic IP Gerät an ein Danfoss RAVL Ventil anzuschliessen. Das sollte auch mit anderen Ventiltrieben, die auf ein M30 x 1.5 Gewinde aufsetzen, funktionieren. Getestet habe ich es aber nur mit verschiedenen HmIP Geräten.…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
I created this battery adaptor for my aqara motion sensor as I had plenty of CR2032 batteries but no CR2450. Version 2 is 4mm thick that fitted perfectly with the motion sensor. I have included the 5mm version for other applications.
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
This is a strange use case: use a traditional vacuum cleaner to clean a robotic one. The official robot cleaning guide says you have to clean the dusty filter with tapwater. If you do so you close the pores of the filter by creating a…
Print approx. €3.90–€4.77 excl. taxPreliminary estimate for PETGSource material: PET
Simple and quick print. Prints in-place, no need for any supports. Print it with 4 perimeters and 100% infill, to be a bit stronger/heavier. After printing make sure to work it out a bit manually so it moves freely. Mounting instructions…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
When dealing with lots of spools and especially with refill filaments, sooner or later you will find yourself with a tangled spool which can only be saved by respooling the filament. So I was looking for a quick and easy solution to…
Print approx. €2.48–€3.03 excl. taxPreliminary estimate for one variant
Use this adaptor to connect your vacuum hose. You need my further adaptors to connect this adaptor to your woodworking machine. I would be happy if you would design more adapters for the basic module. You can finde a file with the basic…
Print approx. €3.17–€3.88 excl. taxPreliminary estimate for PETGSource material: PET
Cable management clip for the Apple 70W USB-C Power Adapter. Based on the 67W adapter model from Petr Albrecht (the V2 model), I made a new design to fit the smaller 70W adapter (28.6x65mm). The adapter suits the Apple MacBook Air with M2…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for one variant
I made this model to utilize spare mason jars around the house. The watering spike keeps the water coming out at a slow enough pace to where you can set, forget, and not have to worry about watering your indoor plants for a *period of…
Print approx. €6.33–€7.74 excl. taxPreliminary estimate for one variant
2024-07-25: Dust was getting in where the print slots into the CPAP. The V3 design has a much tighter fit which should help alleviate the issue. I recommend adding tape around the connection where possible. 3M 2091 filters are about the…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
Updated 05/22/2025 Allows for the use of two Ryobi 18v batteries in place of a 40v battery. Suggested print settings: - 0.20mm QUALITY - PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 20% - Infill pattern Grid - 3…
Print approx. €2.20–€2.68 excl. taxPreliminary estimate for PETGSource material: PET
“Milspec” Bug A Salt 3.0 Stock Adapter In the pursuit of owning the ultimate tactical bug exterminator, I was in search of a robust, tight-fitting stock adapter for the Bug A Salt 3.0 that didn't require tapping screws into the body or…
Print approx. €2.76–€3.38 excl. taxPreliminary estimate for PETGSource material: PET
DISCLAIMER: Airsoft part only, utterly useless in any real firearm! It started as a joke, then became a bet and in the end turned into surprisingly working project: Someone offered me an MP5 hi-cap he had no use for, and i wondered, if i…
Print approx. €4.99–€6.10 excl. taxPreliminary estimate for one variant
Rámeček má vnitřní rozměry 28.6x73.8mm. Na adaptér se nasadí snadno a nehne se. Otvory na kabel jsou užší a ze začátku jde kabel do nich ztuha, ale časem se “ojedou” a kabel nevypadává. edit 23.7.2023: Nahrál jsem další dvě verze, kde…
Print approx. €0.27–€0.32 excl. taxPreliminary estimate for one variant
This is another makita 18V battery adapterplate which has 3 x M3 mounting Screws. For electrical connections I use a 643852-2 clone. It is modified with some holes for the cables soldered to two 1 mm thick brass strips (40 x 10 mm) - See…
Print approx. €1.82–€2.22 excl. taxPreliminary estimate for PETGSource material: PET
This threaded adapter converts from 3/4" garden hose female to 15/16" faucet male. Make sure to use a washer on the garden hose side. There are two version of the .stl file, one with a built-in supporting ring (break it off after…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
print in shown oritation, pause at layer 51 (14,40mm) and toss in a M4 nut in both. enjoy i used 0.6 nozzle on CR-10 Smart (klipper) layer height 0.28, layerwidth 0.72. 100-125mm/s 3Dsupreme PLA+ off white (colour seemed to fit)
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant
A Cap for the "Prusa lubricant LM8UU adaptor" Designed by Honza David. This is ONLY the Cap, for the adaptor check out David Honza´s Design. It is a loose fit . If you want it to be tight scale in down in the slicer. “With some trial and…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
1 inch (D=32mm) female adapter for quick coupling garden hose to water tap. It can be printed without supports. O-ring is needed (Outer diameter = 16mm, inner diameter = 11mm, seal cross section = 2,5mm) and gasket between water tap and…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for PETGSource material: PET
Garden Tap Adapter: 3/4 Inch to M24 for Water Diffusers and Filters Product Description: Introducing the Garden Tap Adapter, designed to convert your 3/4 inch garden tap into a compatible connection for M24 water diffusers and filters.…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
Rangehood ducting adapter 150mm to 125mm
Print approx. €9.25–€11.30 excl. taxPreliminary estimate for PETGSource material: PET
This adapter will allow you to connect your Schrader style bicycle or tire pump to your paddleboard for easy inflation. I am using it with a Milwaukee M18 Electric portable air pump to fill up my paddleboard on the go. I printed in PETG,…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for PETGSource material: PET
I think Ryobi is missing a huge market opportunity. I have a ton of Ryobi Tools and Batteries (1000+ Wh worth!). I've made several prototypes that use Ryobi 18V batteries to charge USB ports or run a 13.8V regulated cigarette socket. I'd…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
None of the adapters I tried had the proper curve to mate up to the arms on the Quest 3, so here's my attempt at one that's working well for me. There are two versions - one that needs supports (shown on the headphone jack side) and one…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
Salut, Cet adaptateur permet de raccorder une Festool Rotex RO150 ancien modèle vers un aspirateur D36 non flexible.
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
The Losi Rock Rey is a fun RC car, but it comes with lame EC3 battery connectors. You can trim the original part to fit XT60, but then it sticks out too far, and you might need to get longer screws if you use the nicer XT60H with the…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
Bike bottle cage/holder adapter to lower/raise cage mount. Use m5*12 screw, longer screw can damage your bike frame , always first try to install cage to adapter and see if screw does not stick out. Cage mounting holes are 64mm apart…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant
Adapter for 250g Spools: Sunlu, Jayo, Tinmorry, Eryone Designed for 250g spools from Sunlu, Jayo (plastic), Tinmorry, and Eryone (cardboard). Sunlu and Jayo share plastic spools, Tinmorry and Eryone share cardboard ones. Remixed from…
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for PETGSource material: PET
Wanted to use teslapunk's Flexible Segmented Vacuum hose with my Festool CT MIDI I so I remixed etinen's adapter to be merged into the original DN40 part from the Flexible Segmented Vacuum Hose. Update: Didn't like how tall the original…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET
An adapter to use Dyson V8 and later accessories with an older Dyson V6 vacuum cleaner. I printed the final part with a 4mm nozzle, 0.10mm DETAIL profile in Prusa Slicer, just because I wanted a nice, clean finish. All the prototypes were…
Print approx. €4.40–€5.37 excl. taxPreliminary estimate for one variant
This adapter inserts into certain cardboard spools to eliminate the cardboard dust from spinning against the spool holders. Fits cardboard spools: Polymaker Overture Inland (Microcenter) Duramic I personally use Polymaker filament because…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
This is part three of my enhancements/addons for the Original Prusa Enclosure (see my other models here on Printables). In addition to the two spool holders inside the Enclosure, I wanted a spool holder on top of the case. So I designed a…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
Some time ago I built a radio with a microcontroller and an FM-IC. I used an ordinary single-turn potentiometer to tune the frequency, but this did not work as intended. It was really difficult to tune in a specific frequency since the…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
This is a vacuum adapter for CAMLOCK that fits a RIDGID Hose. It a remix that was made to fit a RIDGID Hose, specified as the 1-7/8 in Vacuum Hose. The model has a 43.50 outside diameter, with threads, which fits snug on the hose. Made to…
Print approx. €3.29–€4.03 excl. taxPreliminary estimate for one variant
Printed using ePLA. use support as already planned in the attached bgcode file or use your own.
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
Never lose a drop of e6000 again! This thing adapts the e6000 nozzle to a luer lock so that you can load a glue syringe easily. To use: Screw the luer lock end on a syringe Jam the nozzle of e6000 in the other end Squeeze the e6000 tube…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
I was under the impression that all pool net skimmers have a standard size handle only to find out that mine is too large for the model that I initially printed (and remixed). I needed a much longer tube holder with a larger diameter. The…
Print approx. €2.72–€3.32 excl. taxPreliminary estimate for PETGSource material: PET
My miter saw is the Ryobi TSS103T. The inner diameter of the part that attaches to the miter saw is about 37.9mm (1.5 inches). The outer diameter of the part that attaches to the shopvac hose is 55mm (2 11/64 inches). I had to do just a…
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant
So i modeled a shifter knob for thrustmasters new th8s shifter i noticed that there was none of these on the internet, i only found adapters and almost none shifters that fit on the adapters, so i decited to make my own it just slots into…
Print approx. €4.02–€4.92 excl. taxPreliminary estimate for one variant
This part allows a portable AC unit to be connected to a 5" rigid ducting pipe for external venting. My case was through a conservatory wall (UK) during a heatwave. Threaded side screws onto a 6" Portable AC Hose and the other side is…
Print approx. €9.50–€11.61 excl. taxPreliminary estimate for PETGSource material: PET
The female thread works with a US garden hose (0.75 11.5NH seems to work well). The male thread is BSP 0.75, which I guess is used on some sprinklers in the UK and/or EU? TBH I'm not entirely sure if this is useful for any more than one…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
Hi , Here is an adapter for 45rpm in case of breakage or more likely loss. The part is printed upside down and the number of outlines will define the appearance of the surface. ---- Salut, Voici un adapteur pour 45 tours en cas de casse…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
UPDATES: Added version with mounting screw holes countersink so knob does not collide with screw head for those using full sized screw heads. This focuser is based on the Crayford design, where a smooth pinion is rolled along a smooth…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Minimal design for a silent hot-end fan: Smaller 40mm fan base and re-enforcement for screws. Maximize air flow for cooling - No grill and adapter air outlet matches E3D air inlet. Thicker base for better Prusa mount. Fits Original Prusa…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
This handy adapter let you use the SP-Connect sleeves with all kinds of GoPro accessories.
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
I liked the design of "Gardening leaf rake with replaceable teeth " by https://www.printables.com/social/5644-darazsweb but I do not have a Gardena pole. This adapter will connect to a standard broom/paint screw pole which uses ¾" 5 TPI…
Print approx. €2.10–€2.57 excl. taxPreliminary estimate for PETGSource material: PET
Requires an M5 x 2 cm bolt to attach it to the saw. I printed in PLA with a 0.4 mm nozzle and 0.2 mm layer height, with the adapter on its back. I found this orientation to minimize supports and keep the layer lines oriented in a…
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant
This is a simple adapter to use M58 (or M67) filters on camera lenses with M49 filter thread. It should be possible to print it without supports. I found that it screws more smoothly when printed with 0.1 mm layer height, but 0.2 layer…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Hello, I propose a clamp for the GLITTER GEL CRICUT JOY pen to be mounted on your CRICUT MAKER 3. To be printed without support with a raft. Good print !
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
A small adapter to attach a phone with an SP-Connect case to a Gorillapod (Tripod) which uses a 1/4 inch screw as standard.
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
Der Sunlu S1 ist nur für die 1kg Standard-Spulen vorgesehen. Um auch die kleinen 250g Spulen verwenden zu können, entwarf ich diesen Adapter. Nachdem die Spule auf den Adapter gebracht wurde, wird dieser nur zusammengesteckt und in die…
Print approx. €8.77–€10.72 excl. taxPreliminary estimate for PETGSource material: PET
I love the little Milwaukee FMCS cordless circular saw, not only for metal, but also for wood! But unfortunately there is a problem: Milwaukee does not offer a way to use the saw guided on the rail for whatever reason. To finally solve…
Print approx. €9.82–€12.00 excl. taxPreliminary estimate for one variant
Update 10.08.2023: Updated version with tooth which are more stable than the original one. Have you ever had the issue that the thermostat adapter was broken? Yes, it happens quite often. Therefore I created a model which can be used to…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Adaptateur avec manchon a visser sur votre récupérateur d'eau 1000 Litres. Possibilité de le rallonger en P.V.C diamètre 40 mm. Réalisée un joint avec ce que vous avez sous la main entre le manchon et la partie a visser. Impression en…
Print approx. €7.25–€8.86 excl. taxPreliminary estimate for PETGSource material: PET
Hemera/Hermes adapter plate for the Anycubic Chiron. This adapter plate allows you to mount the Hemera unit without modifications to the baseplate of the Anycubic Chiron. You can also still use the included bed leveling probe, but I have…
Print approx. €1.79–€2.18 excl. taxPreliminary estimate for PETGSource material: PET
The LED Support was designed to work as an adaptor to install 5.75" LED headlights in the original support that the Honda Ruckus/Zoomer uses for the dual headlights. The LED headlights have a tab that you need to orient between the tabs…
Print approx. €4.49–€5.48 excl. taxPreliminary estimate for PETGSource material: PET
This is an adapter to directly connect the Bosch GCM 800 SJ (and I suppose several other types) to the Nilfisk Attix 30 vacuum cleaner. Both systems have a click-in mechanism for a fast and easy assembly and disassembly providing a…
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for PETGSource material: PET
Can be used to run 3M adflo from Milwaukee M12 battery. To assemble you need to solder some wires and crimp some spade connectors. Use Large 6.3mm spade connectors for the Milwaukee battery side Use small 2.8mm male spade connectors for…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant
hi zusammen :), ich habe einen Adapter/Aufnahme für einen wie ich finde sehr coolen vorhanden Federkamm entwickelt um diesen unverändert an dem Parallelanschlag (horizontale Anwendung) der GTS 10 XC verwenden zu können. Anwendungsidee:…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Adaptable tray for telescope, for 1.75 and 2 inch tripods, with different inclinations and optional holders for tablets. (See also: https://www.printables.com/model/1040019-frame-for-models-of-telescope-trays ) After making several models…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for PETGSource material: PET
This adapter is curved so you can use inside a wood table and use a vacuum with 40mm hose. Curved prints are hard to print without support so I added also gcode with tree support as I have printed it. You can move printed part also when…
Print approx. €3.78–€4.61 excl. taxPreliminary estimate for one variant
M42x1 CS-Mount Adapter, usable to connect old M42 camera lenses to CS-mount camera. Designed to match correct focal distance between lens and camera sensor. Technical details: https://en.wikipedia.org/wiki/Flange_focal_distance
Print approx. €3.73–€4.56 excl. taxPreliminary estimate for one variant
An adaptor to fit 80mm air duct onto a 100mm inline fan. The fan pipe outer diameter should be a few mm less than 100mm, and the adaptor should be a perfect fit. If your fan is not a good fit, scale the model using larger inner wall…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for PETGSource material: PET
![Universal Parkside Battery Adapter [PAP 20 A1]](https://media.printables.com/media/prints/108918/images/1078299_f1a15a72-f130-43d8-867a-9151b1efc70e/img_20211230_150124.jpg)
