5,940 models
This is a collapsing Lightsaber designed to be printed as one part. Its only 205mm high when printed but expands to over 950mm in total length! Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on…
This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. The hilt is 209mm long with the cap…
This is a collapsible hand fan where the blades interlock in a way that they can't over extend or pass through their collapsed state. Just take care not to break the tabs, especially with brittle materials. They can break when extending…
The beautiful enclosure of the Prusa Core One is not as airtight as it could be and if you have LEDs installed inside air and light will vanish through the corner gaps where the steel profiles come together. Others have addressed this…
--- latest Update: Salt & Pepper Insert! --- Since the camping season is starting again I designed Inserts to use the Container for Salt & Pepper or sth. like that. Also I did minor improvements to all parts. --– Printed O-Rings (TPU) ---…
!!! REPAIRED FLYING PARTS !!! CZ/SK Jedná se o model trojplošného letadla Fokker Dr.1. Jde o méně náročný model na složení. K dispozici jsou nové klapky (Flaps), při tisku buďte pozorní které soubory používáte (jsou označeny vždy buď OLD…
This tower was created by aclugston519 from thingiverse. The thin walled version did not work for me so this is the thick walled version. It printed perfectly as is with the exception of painted supports for the top piece. See…
This Frozen themed Wand i desinged as a Birthdayparty giveaway, comes in three pices to ensure all funktionality and the ability to be more colorfull. I did a little hack when slicing the Stick-Model. I set a Hight Range Modifier from the…
This 3D-printed cargo strap clip is designed to slide over a rolled-up cargo strap, keeping it neatly coiled and preventing it from unraveling during storage or transport. Perfect for keeping your garage, workshop, or van organized! These…
After creating some more complex models/containers with threaded attachments and supports, finally came up with this simple and less bulky design. The smaller cap goes into the larger portion. The larger part attaches to the top of the…
Collapsible / Rotatable Clothes Hanger (Print in Place) This collapsible / rotatable clothes hanger weighs little, is easy to store and is perfect for on the go. The rotation locks into the open and closed positions with a loose fit. If…
parts size adjusted for easier storage
I used the Golf Ball Marker Template from Thingiverse (https://www.thingiverse.com/thing:3830902/files) an added the RPT pattern from the Original Callaway to it. For best fitting i had to scale to 101% maybe for your Printer you have to…
EINZIEHBARER LICHTSCHWERT-SCHLÜSSELANHÄNGER EINFACHE MONTAGE! UNTERSEITE DES GRIFFS KANN ABGESCHRAUBT WERDEN, damit die Klinge entfernt und ausgetauscht werden kann. SCHLÜSSELANHÄNGERRING erforderlich Printed on Prusa mini Settings: 0.15…
Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Veröffentlichen, verteilen, verkaufen oder handeln Sie die Dateien oder physischen Modelle dieses Objekts nicht.
Compact Capsule Filler with Credit Card Mixture Dispenser This compact capsule filler is designed to fill 24 capsules of size 00 in one batch using a credit card as a mixture dispenser. The capsule filler is made up of three functional…
Hello, If you like my design, please like and share it! This is an engine cover nut/bolt cap I made for my 1995 BMW 325i E36. There are 4 caps in the engine bay that clip in once the 2 nuts and 2 bolts are installed for the two-piece…
Goes into Tomy Gacha gashapon vending machine
Nespresso Capsule Holder - remodeled
I also made camping version. It is here : here Tento inovativní 3D model skládacího ramínka vás ohromí svou jednoduchostí a praktičností. Ve složeném stavu se vejde do dlaně a je tak lehké, že ho můžete nosit kamkoliv. A co je nejlepší?…
A print-in-place collapsing sword! It's my first sword so it's not perfect, yet… STEP and F3d files added! pls post a make! ADDITIONAL SETTINGS: 0.15mm layer NO supports retraction setting (optional) outer walls first 10% infill seam…
A quite minimalistic holder for Nespresso capsules. Holds 5x4 capsules. Print instructions Prints without supports as is.
This is a model of Luz's Palisman Stringbean from The Owl House with a collapsing staff. It is 83mm wide, 183mm long and 268mm tall. With the staff fully extended, it is about 1.4m tall. This remix is based on Stringbean Palisman - The…
I'm working on a 3D printed keyboard and I needed some extra keycaps, I didn't find anything useful or similar to the ones I bought. Printed with both PLA and PETG 0.15 mm layer height
A lot of child, a lot of doll but only one Pacifier… a receipt for a disaster :-) Now there is no problem as they now have anough Pacifier for everyone… but I know… they'll find something else now :-P Easy to print and kids love them.…
Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Veröffentlichen, verteilen, verkaufen oder handeln Sie die Dateien oder physischen Modelle dieses Objekts nicht.
Collapsible Water Sprinkler (Print in Place) Sweet collapsible water sprinkler for your kids. The water connection needs a little support. You only need the original seal of an adapter for the tightness. Model printed with: Prusament PETG…
Revision Notes 8/23/2026 - I added a Small-to-Large connector cap after a few people requested it. There are three kinds of connector in this set. I have found the smaller connector fits many types of hand soap, dish soap and lotion. The…
Hello, Welcome to my profile, full of models and miniatures :-) I have an Extendable, retractable, collapsing long sword for you. The individual parts fit together perfectly and it is very well thought out and so you can even play with…
I recommend using fuzzy skin in the slicer for texture to the base I would not recommend using for fuzzy skin for the inner three stick because it would add friction and it would stay in place
None of the adapters I tried had the proper curve to mate up to the arms on the Quest 3, so here's my attempt at one that's working well for me. There are two versions - one that needs supports (shown on the headphone jack side) and one…
I printed a couple of copies of @Adam 's most excellent rock scent-training capsule recently: https://www.printables.com/model/295199-scent-trainer-rock and was impressed with both the concept and execution. As an aside - I've also…
M6 Nut Knob - Printed with encapsulated nut. G-Code included for 6 nut print, with pause for nut insertion
Čepičky pro označení umístění kol na autě. Verze se závitem,pro výměnu za stávající čepičky a verze bez závitu pro nasazení na nejběžnější plastový typ čepiček, průměr 9,8mm. Valve caps for distinction Wheels placing (position) on car.…
Are the tiny little shafts on your potentiometers not fun to twist? Throw a custom cap on it! 6mm internal hole, fits my 1/4" potentiometers snuggly. A recessed hole exists in the bottom of each cap to accommodate a few millimeters of…
M5 Nut Knob - Printed with encapsulated nut. G-Code included for 6 nut print, with pause for nut insertion
Material wahlweise, z.B. PLA, PETG, ASA, etc. Layer: 0,15 - 0,2 Infill: 20% No Support, no Brim needed
The pillbox that's fun to open, even if you don't want to take your pills. It's amazing for daily usage because it is fun to use it. It is not just another PillBox, this is Awesome BrainZap! PillBox . PillBox is designed to store your…
Holds 20 capsules. Brim required for stability Print instructions 15% fill Update: New version available here https://www.printables.com/model/129039-nespresso-capsule-holder-version-2
I had previously re-mixed some dog scent training capsules that had a magnetic base - https://www.printables.com/model/936563-magnetic-dog-scent-training-capsule My daughter wanted to use the capsules with a cheap rubber safety non-slip…
If your household is like mine you may be missing several of the these caps on your toilet. Heres an easy solution to those ugly looking rusty bolts.
Protective cover for child's pouch Prevents the pouch from getting squeezed, protects baby from getting dirty and ensures that all snack contents end up in baby's tummy - Easy to grip - especially useful on the go - designed to ensure…
We often buy other brands of Nespresso capsules, such as the Jacobs or Omnia capsule in the picture. These are often not packaged in the same way as the original. Thanks to the designer of the original model because it works great, I just…
Toyota Prius center caps to suit factory rims - PLA
Here's my super long lightsaber, like to print it. Supports are not required, for best results use a 4mm nozzle. The katana is about 40 inches/102cm long in total and the handle is about 7.8 inches/20cm long. Have fun printing.
Collection of mud flaps for the front and back of the 3DSets Landy. Overview Logo 4x4 Mountain. LandR. Logo. **** Printed with PLA and 0.25 nozzle, color change at 0.65.
Really small pill-box/container (3cm high and 2.4cm wide closed) with threaded caps for a better sealing. In STL files there are also a cap with a smile and one with an hook. Hope you like it! Ps: the hooked cap could need supports to be…
These are footswitch topper for your Fractal Audio Modeller. They provide a tight fit and make it much more convenient to use your device barefoot or to switch presets with your hands. ---- Did you like my print? If yes please rate it ❤️…
NOTE: you will need some hardware to fully use this print I take my chapstick and my keys everywhere with me. If I forget my chapstick but remember my keys, I have a bummer of a day. If I forget my keys but remember my chapstick, my day…
3D printable sushi keycaps for Cherry MX switches are a fun and unique way to customize your mechanical keyboard. These keycaps are designed to fit standard Cherry MX switches, which are commonly used in mechanical keyboards. The keycaps…
I wanted a Chapstick holder to place my tube onto my locker at work, so I don't waste time digging through my locker to find the right pants pocket with my Chapstick in it. I did not like the designs on thing verse, as many of them…
Nespresso coffee capsule holder for Prusa MINI. I had to make this model because the original did not fit the mini. Just use some double-sided tape to attach it to the wall. Print instructions Print in PLA or PETG I used 15% infill for…
I love having a dice tower to roll my dice, but I have not found one that is easily portable. So, I made one that is not only as small as a soda can (width wise) but is also my first print in place model. The base is able to be snapped…
Made this to fit on the BMW rims underneath my Holden Crewman and match colours to my vehicle. Better use a better temperature and weather resistant material like PET-G. Addition to https://www.thingiverse.com/thing:4854673
52mm lens cap with flaps for easy screw and unscrew
The aim of this project is to provide an open source, top of the line camera slider for e.g. timelapses, that costs approx. $100. This project is somewhat advanced and requires several non 3d printed parts. This is to provide a slider…
My girlfriend had several used lip balms that either had missing caps or loose cracked caps so I decided to revive them with some 3D printed replacement caps! The model is quite basic, just a hollowed cylinder with some fillets. This lip…
Description I made this model as a fun toy that could be worn as a keychain. I soon found out i made great chopsticks. 😅 Printing Use supports only on the lid. I printed in AURAPOL 3d filament and it worked perfectly. I used brim to…
An organizer for chapstick, lipstick, or similar items. Pictures are in rose gold, of course!
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Collapsible, Extendable, Retractable Baton. It is a good toy and a cosplay option. The head at the handle is screwed. The material I used is PLA/PETG Basic…
UPDATE: The .stl file now has the slot in the tab! This is a very slight remix of the Dessicant container by @biketiger. Scaled to 150%, and added a tab with slot to easily zip-tie to the inside of your crab pot or trap, or shrimp, etc.…
Originally designed for use with the Date Night Idea Dispenser , but probably can be used for a variety of purposes. Maybe a tooth container for the Tooth Fairy? A time capsule for Leprechauns? A garage for your pet ladybug's camper van?…
I made a simple Chapstick and Vicks inhaler holder, there was some extra space so i added two more holes.
This model snaps into the hairband, printed using small layers for the snap to be the right size and with a brim, but no supports necessary. This was really fun to design, I had to trace the arc from the band and attach the supplied snap…
Screwable caps for UHF type connectors according to 5/8 - 24 UNEF
Wargame Walls Collapsed Pipes Section 17 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
49mm lens cap with flaps for easy screw and unscrew.
These are holders/caps to add to this model to make it easier to spin in your hand: https://www.printables.com/model/126060-fidget-drive I really liked this fidget spinner, but wanted some holders to make it more satisfying to spin in my…
Remix which has a 5mm bottom. (twice the height of the original in total) & wider flaps. 30mm outside width. It feels a lot more solid and doesn't bend. The original flaps felt a bit to small so I enlarged the width from 20.4 to 30mm.…
Made to fit the Bamboo Land cruiser. May fit others. Color change G Code below
Inspired by Pavel Rampas 's elegant Battery Holder Vase Mode , I designed a Lip Balm Holder for Chapstick or Burt's Bees brands to be printed in spiral vase mode. For Chapstick, please use Chapstick Lip Balm Holder STL due to its smaller…
Wargame Walls Collapsed Fan Section 16 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Nespresso Vertuo Capsule Dispenser. This design holds two of the 61mm x 68mm boxes.
The plastic pods tend to break ; and if you are buying seeds instead of the plant capsules you might need this ! My daughter has 2 modulo nano gardens - that's 8 pods total ! This is not an exact replica of the original pods but it's the…
💬 Summary A set of protective lens caps designed for the Samsung Galaxy S24 Ultra . These caps fit over the three main camera lenses to prevent scratches, dust accumulation, and impact damage. A simple, fast print that adds a layer of…
There are two groups of files for this. One is just the front and rear caps. The other is the front cap with a kill flash. Shockcord Cap with Killflash: I have ‘remixed’ and added to this kit by creating an optional front killflash/anti…
Printing instructions: Magnet encapsulation in PrusaSlicer is accomplished by pausing the print before the layer that covers them : Slice the 3mf file according to your preferences. Scroll to the first layer that will cover the magnets.…
Updates compared to version 1. Center shaft increased to hold sleeve New base for stability and to deploy capsules from sleeve. Build Top section requires a brim for stability Bottom section I placed three support paint on enforcer points…
Hollow Maps of European Countries Made with tracing the inside onto paper in mind. Size: 160mm X 160mm X 1mm thick. Can be resized in you slicer. Layers: 0.2mm or less. Countries so far: FRANCE, GERMANY, POLAND, ITALY.
* No screws, glue, or any hardware required * revision note 09-07-2024: “the master printer update” The current version can be fastened by a flange locking screw in the bottom of the pawn. The base stayed the same. Stay tuned for the pip…
Square box for collectible coin capsule with 38 inner diameter and 40 outer diameter.
The Ikea Parik is a really good chair, firm pre-formed foam and comfortable to sit on. We bought nine of them second hand for little. The legs have a foot that can move around a ball at the end of the leg. One of the chairs missed the…
Holder to project towards the ceiling (on a bed for example). Printed without supports. Access for cables, rear buttons and fan grid. 10 degrees tilt. The slicer has to be set to avoid unpleasant stringing close to the device: UPDATE…
I created this collapsible Base so that i can first get out of my simrig and second that the Virpil Sticks are not in my eyesight when i play racing games. Apart from the print you will need 4x M6x20mm Screws 4x M6 Brass Inserts 4x…
Worried that filament might find it's way into the Z-Bottom motor mount screw holes? Here's your solution! I've made a couple versions of the caps and provided bother .STL's. V2 = looser fit; easier to remove V3 = tighter/snug fit; not as…
Two designs capsule holder for Dolce Gusto Nescafe coffe maker. Both are mobile, you can attach the base to the table with double-sided tape to allow the capsule holder to rotate on its own axis. The expandable design has 10cm height…
In the Rc hobby, everyone wants to have the best possible control over their models. Either it is a drone, a plane or something else, often the pilots feel that they would like to have longer or thicker joysticks for more control.The…
Too much of sewing is pinning and measuring and I get bored easily! I got tired of making double fold straps so I made a giant bias tape maker instead. This is for 90mm/3.5 inch wide fabric strips. This was made using the customizer by…
(Deutsche Beschreibung unten) This stand is suitable for storing and serving all kinds of shot glasses. Thus, from an empty spool of Prusament, you can make two shot glass stand. No screws are needed. The handle is printed in two halves.…
Printing Layer Height 0.20mm or lower No supports needed Material: TPU and PLA (I used a mat PLA but most types should work) Perimeters: The TPU part 4 or more others can be juist 2 Assembly/Installation begin by pushing in the TPU part…
I wondered, which fan-upgrade would be worth it, so I decided to take a more powerful 5015 fan - the EBM PAPST RLF35-8/14N 24V. I remixed the original BEAR Fan duct, so credits to Bear Lab…
Fix for the still not fitting version. Now working for DSLR like 80D,70D,60D,… Settings Value Infill 15% Perimeters 2 Layer Height 0.20 mm Material PETG (PLA) Supporting Material only on surface / bed Comments printed on MK4 with MMU3…
Center caps with a Chevy theme. Tricolor and single color print files.
Overview The timelapse feature of OctoPrint is one of the main reasons I set it up on my printer. But, the image quality can be somewhat limited to what a webcam can provide. So, with some inspiration from other creators online, I…
Description I needed to keep my Philips Hue® outdoor LED strip unplugged in the garden, and I decided to print a little cap to screw on the connector to avoid ruining it with humidity and weather. The M15x1 thread seems hard to print, but…
Hollow Maps of European Countries Made with tracing the inside onto paper in mind. Size: (over 100mm wide) X 1mm thick. Can be resized in you slicer. Layers: 0.2mm or less. Countries so far: UNITED KINGDOM, UKRAINE, CZECH REPUBLIC,…
20 Tabletthalter Für Schnapsgläser Serviertablett ca. 24 cm lang, 19 cm breit, 3 cm dick, Loch: 3.8 cm. Bitte beachten Sie, dass der Bodendurchmesser des im Halter platzierten Glasbechers weniger als 3.8 cm betragen muss Mehrzweck – Das…
This is a small tray for six Dolce Gusto type coffee capsules: Clean uncomplicated design, easy to print. Capsules sit slightly angled for an elegant look and easier pick up. Model file oriented for printing without supports. Bonus model:…
