Counting matching models…
Note: You still have to clean the lens regularly before the laser. There is definitely smoke building up there! Update Feb 2021 V 2.2 better Airflow ------------------------------------------------------------------- Hier habe ich für…
Backplate for the Atomstack 20 Pro Diode Laser Series Controlbox, it fits on all Atomstack 20 Pro Lasers.
Atomstack wall mount for space-saving storage of the laser cutter. Needed for two holders: 10x M4 14 10 x M4 Nuts 1 x 4mm poplar plywood sheet DIN A4 4 x 6 wall plugs and screws The Laserfile.zip contains all files for the laser cutter to…
A clamp for holding down wood or other material on the honeycomb bed for an Atomstack laser cutter. It may work on other beds but it was specifically designed for the Atomstack bed and fits very snugly. You can scale it down slightly if…
I recently bought a Atomstack A5 diode laser and wanted to add airassist to it without removing the shielding around. So I desinged a replacement sideplate with a 1mm nozzle that fits a 4mm inner diameter silicone tubing. Print…
Open, easy-to-install cable, less flimsy links, snappier clips, and less stiff and more flexible cable chain. I used m3x15 hex screws, locknuts, and washers for attaching to the laser, although the laser hole diameter was 4mm. See…
Füsse bzw. Halterungen für einen Atomstack-Laser zur Befestigung einer Grundplatte.
Raiser feet for the Atomstack X20 PRO series. Raises the laser frame by 25mm. Included step and obj files for your own remix. The screen foot has to be placed first without the frame. Depending if you want the mounting screws in or out…
The mounts are work in progress. I used a 10x20 cable chain to fit the cables and the hose of the air assist: https://www.amazon.de/dp/B08R1LFZTN?psc=1&ref=ppx_yo2ov_dt_b_product_details Used these belt clamps (one especially on the X…
Just a remix to use a 400x400 honeycomb cutting board from Sculpfun with the Atomstack S10 Pro to position your material at the real origo point. Had to edit the offset to fit the frame of the honeycomb. Now it is snap-fit to the…
Air assist to get an accurate pointed airflow to the laser spot. This is for the Atomstack Laser Modul M40 (AST40W50S; 21K23) It replaces the laser shield and metal cone. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
This is a set of bolt-on mounts for limit swotches for the Atomstack A5 and A5 Pro laser engraver series. The mounts are adjustable and they allow the usage of the hard endstops, therefore protecting the endstop switches form damage. The…
Vorrichtung oben und unten aus PLA gedruckt Adapter M12-M6 + Achse/Axis aus 1.4301 Kugellager/Ball-Bearing : https://www.ebay.de/itm/222526238773 Schrittmotor / StepperMotor: https://www.ebay.de/itm/392557822271 Antrieb / Drive:…
Motorized Z-Axis for Atomstack A5. (with mount for 3D touch sensor like BLTouch) Effective Z-axis travel is between 100 to 110mm. Additional weight on X-axis carriage is about 300 grams (690 -> 990). Y-axis travel is reduced by about…
A PSU-mount for the Atomstack A5 Pro laser engraver. I assume it also fits on the non pro. Makes it a little easier to put it aside. PSU-dimensions are ca. 113x50x33. Mount it with some short M4-bolts and T-nuts. Check if it fits before…
This simple sheet slides onto the left front foot of the engraver. Easy positioning of materials fitting their left lower corner onto the origo. No need for any modifications, just snap it onto the left front foot. Printed 0.2, PLA on…
mount with adjustment for Atomstack A20/S20/X20 model fill >= 50% for assembly with laser you need: mount x3 mount2 x1 m5 screw 12-15mm x4 m5 nut x4 5mm washer x8 (optional)
A set of feet, to hold your Atomstack A5 Pro+ laser engraver to a sacrificial base board. The inner gap to slide the feet are 3mm wide, so they should fit other engravers or objects with a similar size. My laser engraver has a kind of…
Add a Center for the Rotary
The AtomStack AC1 camera mount is designed specifically for the B1 enclosure. While both of these products are great, they don't fit together as is. To address this, I have designed a custom mount(detachable with magnets) that allows the…
Direct replacement for the viewing window on the Atomstack M40 laser module. Please note the window is held in place with an M5 grub screw. This screw is also used to secure the air-assist nozzle. I replaced the grub screw with an M3x8…
Print two. Screw them down with 4 screws.
A lightweight spacer for installing limit switches on an Atomstack A5 Pro, will probably work on many others. It is a fairly easy, light print. If printing with PLA, don't overtighten. Allows installation of the kind of switches found…
Nozzle from the Atomstack air pump kit | https://aliexpress.ru/item/1005004561794589.html
These attachments are designed to clamp the tumblers from the inside of the mouth. This allows you unobstructed access to fully engrave/etch the entire outside of the tumbler without the jaws interfering with the laser head. There is a…
Befon Branded Atomstack Laser Engraver Risers by RebelTaz I found this fantastic design ( Ortur Master 2 LM2 Height adjustable feet by LoZa on Thingiverse: https://www.thingiverse.com/thing:4676121 ) for risers for a laser engraver. This…
If you regularly move your laser-engraver, it can be a good idea to park or secure the laserhead from sliding around. I designed this for my Atomstack A5 Pro* and it fits great. This is no guarantee it fits yours either and maybe you have…
Crosshair laser attachment for Atomstack X30/A30/S30 Pro laser module (M150 160W / 33W ) Also included the pinouts for the laser module to get power for the red laser module Update: Added a new design which is slightly outside the layer…
This is Atomstack M100 Noctua Mod. Atomstack M100 is used in Atomstack S20 Pro or A20 Pro laser engraver. I can use it with zero sound. You need: 1) Fan: Noctua NF-A6x25 FLX 2) DC-DC converter 24 V → 12V: MEAN WELL SPU03N-12 Just print it…
Just a simple air assist plate adaptor for the Atomstack A5 Pro Designed to use a 5 to 6mm ID flexible tubing Support is recommended
Halterung für die externe Befestigung der Atomstack x20Pro Steuerungsbox z.B. bei einem selbst gebauten Gehäuse, die Lüftungsschlitze stimmen mit den meiner Rückwand überein. Die Rückwand findest du in meinen Modellen.…
Little blocks for the F3 laser table. Ensures that series works can be done from the same position over and over again. Snug fit over the triangles (only to be placed over the ridged ones). on top M5 bolt hole for further expansions.…
Atomstack X20 Pro Frischluft für den Laser. Link zum Schlauch: https://www.amazon.de/dp/B07M6B3PXS?psc=1&ref=ppx_yo2ov_dt_b_product_details
This is a remix of https://www.thingiverse.com/thing:4692711 I made this because the air nozzle was too high for my laser, I have reduced the height so the aim is where the beam focuses, 2mm below the shield. Print Settings Printer:…
Use this and an M4 screw to find the home position on your Atomstack X7 Laser engraver.
Backplate for mainboard, so i can be placed otside the enclosure
Printer: Ultimaker 2+ Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament brand: Makerpoint Filament color: White Filament material: pla
The Atomstack P1 laser engraver has a ventilation outlet of around 50mm, while most air filters (like the Atomstack D2) need some 75mm tube. This adapter allows to easily attach these to the Atomstack P1. The 75 mm tube gets fixed using a…
Drag Chain for AtomStack X7 Pro I had this drag chain laying around from a previous project, so I decided to mount it on the Lasercutter. But it wasn't that easy. The mounts are doing their job, but they are not perfect. I added the f3d…
Hiermit kann das Circuit-Board im Acrylrahmen beim Umbau eines kompatiblen Diodenlasers auf das Atomstack R30 Lasermodul oben auf dem Modul befestigt werden. Die Verbindungslinie der Spacer sollte nach oben zeigen (auch wenn diese minimal…
Holder to keep in place aluminium business cards for engraving in Atomstack P1 engraver. Use printable spring stabilizer to keep business card in place, otherwise laser cooling fan will destabilize it and damage the image (business cards…
Pied permettant de surélever le graveur ainsi que le support pour ranger ceux-ci lorsqu'ils ne sont pas utilisés. 3 hauteurs disponibles : 5, 10 et 15 cm Visser tout d'abord les vis (FHC M5 pour ma part mais toutes vis M5 feront…
This is a Atomstack R30 mount. The rail clamp (for hight adjustment) is not with direct screw taping, because its damageing the laser housing. The screws are clamping the laser. Im using m3 brass inserts for more strength and long life…
For Atomstack X20, A20, S20 Sealing the air-assist chamber good or bad idea? I was surprised by the amount of dirt (soot) I found in the chamber after a few cuts. The soot can land on the protective lens and cause distortion or more…
Adapter zum erhöhen des Atomstack Maker R1. Mit Hilfe des 16mm Adapters lassen sich nun mühelose größere Tassen mit Henkel Gravieren. Zur Montage benötigt man 4 Zylinderkopfschrauben M4x25.
I designed this adaptor to fit a 10w laser module from China onto an Atomstack Z Screw Slider. Screw spacing is 16mm x 40mm for the laser part and 24mm x 38.5 for the part that attaches to the Atomstack Z Height Adjuster. I used M3 screws…
Y-Endstop für Atomstack S10 Pro nach Umbau auf R30 IR-Lasermodul Prusament PETG
This is a mount for a 12 mm diameter crosshair laser pointer module on the housing of the laser of a laser cutter/engraver. Print Settings Printer Brand: Anycubic Printer: Kobra 2 Rafts: No Supports: No Resolution: 0.2 mm Infill: 10%…
I designed these feet in fusion360 to raise the honeycomb to an optimal and adjustable height for the Atomstack A5 20W. The goal is to elevate the work surface as much as possible to minimize laser wobble. These feet offer additional…
For all Atomstack fans - a 3D logo for your enclosures. Printed with a 3mm bottom layer You must include in your slicer (G code) the M600 command to change the filament for the other color. Best to let the base color print 1 or 2 heights…
riser pour réhausser Graveur Atomstack X24 de 120mm conçu pour des plaques d'acrylique de 2,6mm d'épaisseur imprimer un jeu de pied en normal puis 1 jeu de pied en miroir
*** After using this for a few days i think i need to make it thicker to make it more rigid. it still works fine right now but it does sway lol I needed a bracket to hold the new Atomstack R30 IR Laser Controller board to the Z chassis,…
Atomstack R30 infrared laser module model
I designed this as a option to quickly adjust the focus on your laser without adding a z-axis screw, this makes adjustments super quick with the help of gravity and the included 2mm spacer. 100% infill is recommended but I did 5 layers…
Air Assist Adapter by RebelTaz This is an air assist adapter plate for an AtomStack A5 Pro. This replaces the left side UV panel and is designed to accept a 3/16" metal pipe. I used an old brake line cut and bent to the correct shape. The…
This part is an adapter for using a silent Noctua 60mm fan for cooling the Atomstack M100 laser-module. The part was created in the style of https://www.printables.com/de/model/275058-atomstack-m100-noctua-mod but the present version can…
Die Backen haben eine Gesamthöhe von 17mm und lassen somit einen zum Rand hin nähere Lasergravur zu. Gedruckt habe ich diese mit verschiedenen Filamenten. Der untere Teil aus PETG und der obere Teil ab Layer 28 aus TPU 95A. Beides mit 10%…
Adjustable Leg (LEGO) for Atomstack A5 PRO, Nastaviteľná noha pre gravírku Atomstack A5 PRO. Nadstavenie s kockami LEGA
Backplate for Atomstack X7 laser so it is possible to get the electronic outside the enclosure
Holder for screwing down the power supply on a board. Print Settings Printer Brand: Prusa Printer: i3 MK4 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Notes: If you use Prusa Slicer, the included project already has the necessary…
The laser plates for AtomStack does have different dimension. With this adapter it is possible to use the AtomStack M50 laser in the base plate from the AtomStack R30 and AtomStack R30v2 without replacing the laser plate. Printed in PLA…
This box will keep your unused laser module from the Atomstack P1 safe. Just unmount it from the printer and put it in the matching slot. Print instructions: 0.2mm layer height 0.4mm nozzle no supports Printing the seal is optional. Also…
I've misplaced that card more than once. This helped.
designed to mount to t-track and cradle laser cutting bed.
Just a jig får holding business cards, easy to engrave multiply cards with this jig so the cards always get placed at the same place. Can be rotated for vertical or horizontal.
This is a utility part to assist in perfect zeroing your X and Y axis on an AtomStack A5 M40. You will need to do a couple of modifications to the laser chassis while installing this. Move the belt retaining T-nut on the left side up to…
Installing the Z-axis adjustment accessory on the Atomstack *20 Pro models requires moving the Y-axis stop switch 20mm or the machine will fail to home, and even when moving the switch 20mm it will still fail if the laser head is in the…
Remix of: https://www.thingiverse.com/thing:2673206 I like the simple design of the Duet Wifi Case from denos, so I remixed it to use it on my Atomstack A5. Changes on bottom part: Duet position moved to make space for the…
Conduit latéral pour extraction d'air permettant un placement plus aisé du graveur, même contre un mur ce conduit a été conçu pour être installé à l'arrière du boitier B3 de protection Il peut être monté pour déporter le conduit…
To see how it is used, you can watch this video.
Important! this is not a complete solution to removing smells/all toxic chemicals from the laser cutting or engraving process, but does remove a significant amount of pollution that would otherwise escape into a room. The only parts that…
This little cap goes on the end of the focus screw on the laser head to tighten into place. Normally the screw can wear in the back plate and make it difficult to get an exact focus. It also helps avoid tightening into one of the holes in…
Atomstack A20 (X20, S20) Pro Controller Back Plate This is a modification to the original model to continue using the Wi-Fi antenna. You can place the antenna in two orientations. It isn't the most elegant, I was going for functional,…
An holder for active carbon filter fabric for the side air inlet of the Atomstack P1. This helps to prevent smoke entering your room and also scatters/blocks any laser reflections coming through the venting holes. Just cut some active…
Rotary Jaw for Atomstack R1. Increased jaw biting with to grip to bigger objects. f3d, step includet
This is a custom mount for the Atomstack F30 Air Assist , designed for the Atomstack A5 / A5 Pro laser engraver. It mounts directly onto standard 2020 aluminum extrusion profiles , which are used on the A5 series and many similar diode…
For Atomstack X20, A20 and S20 users. For maintenance the laser head has to be removed on almost daily basis. (cleaning) The JST plug is giving you nightmares? Fear no longer and use the Atomstack Aviation plug upgrade. Uses a 12mm 4-pool…
Adapter Plate for mounting Atomstack 130W laser onto most generic laser cutters that use V-Wheels on 20x20 extrusion. Plate also mounts external board. Includes clips for both cables and air hose.
This is mod to at air assist to Atomstack X7 Pro Laser Engraver Machine. I printed parts in Prusament PETG. Parts needed: 1-2m of 4x6 4x6 (ID 4mm, OD 6mm) silicon hose - Airassist 1x M5x50 Bolt ( ISO 4762 ) - Airassist knob 1x M3x6 Bolt (…
When I got my x7, the original case has some issues. The face kept coming off (it's just glued on, and not very well). I used Fusion360 to design a new case for the remote board. I figured instead of having the face snap/glue on, I would…
A mounting plate / bracket for an Atomstack A5 Pro+ Laser Engraver's control board, so it can be mounted to the back of a wooden enclosure. Remove power cable from the laser engraver!, unscrew the metal control board from the engravers…
Just a plate to make templates on.
Atomstack A20 Pro V2 Focuscard & Holder 8mm engracing and 4mm cut both in one tool.
Atomstack A20 Pro V2 Focuscard and holderi
Adapter for the Atomstack P1 laser. Snug fit on the back and lets you connect a 100mm vent pipe to it. Category: Machine Tools
This is a modified version of the clips that come with A24 to hold the laser module cable and air assist host. My A24 came with a flat laser module cable and it did not fit well with the included clips.
Etui de rangementpour Laser Diode Atomstack P1
Etui pour ran gement Laser Infrarouge Atomstack P1
I bought a new Atomstack M50 laser (10W) which works great. However, my existing Air Assist came with a shorter window. This extension blocks the empty space, so the laser light won't come flying out the top, and the laser+fan assembly…
Replacement gauge in case you lose your factory gauge for setting the height of your Atomstack X20 laser head. Included FreeCAD file for customization.
Patas elevadoras para CNC Atomstack A10Pro v2. Base + 4cms, 7cms y 10cms.
Corner supports fit firm to machine. Corner supports have notches on top for double sided tape(heavy duty 0.07"thick) and on the sides for magnets(60mmx10mmx3-5mm). Panels may need to be adjust for your machine(mine wasn't square). I…
This box is designed to replace the metal housing that comes with the Atomstack A5 20W to add space for a relay, solenoid, tubing and fittings all in one. It uses the original metal backplate that also acts as a foot and is mounted using…
Very simple and rudimentary mount frame to screw the Duet Wifi at the position where usually the electronics box on the Atomstack A5 is. Category: DIY
Conduit découpé en 2 parties pour pouvoir s'imprimer sur des imprimantes de taille plus modeste
This is a custom-designed insert for the Atomstack X7, A10 Pro, and S10 Pro laser engravers. These machines have a hole in the front acrylic screen for routing an Air Assist hose. However, this opening is often oversized, allowing stray…
Cover for Atomstack B1 enclosure without display with cable hole. I use Atomstack B1 for Creality Falcon2 so I have reversed front cover for cable management. This is cover to cover hole for Atomstack display which is not there anymore.
