4,144 models
Here we go again next project for the contest This velcro organizer is specially design to have the most necessary things always at hand. How many times you get in and get out the car? Tired of looking the most necessary things to take…
— Updates — 27/08/2023 - Okay, I've had quite the busy year 😅 So I'm finally getting around to creating lower flow versions as well as looking at different threads and integrating washers for a tighter sealed fit. Should be around a month…
Festool Mobile drilling attachment MB 40 - Accessories Do you already know our Mobile drilling attachment? The MB 40 mobile drilling attachment is your companion when precision is required. Print your own Festool Accessories for the MB 40…
This innovative bottle holder design serves a dual purpose: it allows you to cool PET drink bottles in lakes and rivers and easily attach them to backpacks. This makes it perfect for outdoor activities like fishing, hiking, and camping.…
This uses 4" dryer ducting hose to connect a fan to a nozzle for blowing air under the covers. I tried this with a box fan, and also a squirrel cage blower fan. The box fan in this design works poorly. The pressure in front of the fan…
This is a bracket to allow you to hang your tonal fitness system accessories when not in use. I've mounted them to the bottom of the bench to hang the bar, rope, or handles when not in use. The center hole allows for a #6 or #8…
This is an attachment for the Makita DUB184 18V Brushless Electric Blower . Note: It may fit other models that use the same blower funnel but I have not tested with others. I have included as many files as I could so it can be modified…
Introduction A simple pair of magnetic holders for attaching flat bellows to a metal lathe as ways covering. I used this 5/8" tall flat bellows available from McMaster Carr: https://www.mcmaster.com/1320K111/ These bellows are made for…
The idea and design was somewhat inspired by https://www.printables.com/model/29577-dyson-v11-wall-bracket-for-accessories-wandhalteru%2Fcomments I had a few things about it that didn't fit my needs so I made my own. All of them are hung…
PETG recommended for strength and flexibility at 20% infill with 4 perimeters. (Some petals snapped with less infill.) No supports needed. Mounts horizontal or vertical, including the underside of a shelf or on the ceiling, depending on…
An adjustable strap attachment which allows you to add a sternum/chest strap to a variety of backpacks.
Note - I have not printed this with the new Arachne perimeter generator. If you do come across tolerance issues print the main parts with the classic settings. This isn't quite a remix but a slight design change. I originally used Reven's…
Description This is my version of the keyhole/extension cord magnetic attachment seen on Linus Tech Tips. I am sure they will eventually come out with a great product so do check out their store, but for now, we can make our own! There…
Standard plant pot with already attached planter plate. Can be also printed separately. Scale the model in Slicer :)
This model is a adaptor for fit a PC4 M6 coupler. Print take 12m in 0.15 layer height on a MK4. You can print this without support, I recommend PETG to print it.
This watering can attachment makes it possible to water with pinpoint accuracy even with large watering cans (10 L).
If you find this useful, please consider sending a tip. Thanks! https://paypal.me/cdsmakestuff Retaining ring / nut for KitchenAid stand mixer attachment, Food Grinder (FGA-2). Depending on the tolerances of your printer, it may be…
Smartphones put power in the hands of everyday people to hold awful behavior to account, but holding up a phone makes you a target. This print lets you use your phone as a body camera, and attaches to a shirt, lanyard or backpack. Add an…
Complete the look and print some salters to go with your Pow Plow and side exhaust . Dimensioned to be printed as a pair and fit these salt shakers . I recommend saving most of the salt in another container, then using a dab or two of hot…
We've all seen them. those sleek, minimalistic and modern 3d printable wallets. they're pretty cool. customisable, cheap, easy to replace… but sometimes you have the need for speed… Introducing this card holder for your office pass,…
This is a replacement for the spring-loaded latch that goes on the extension tube of the Tineco A10 (or A11) Hero vacuum cleaner. I have had two of them break, so I think it's a design issue with the original. This part is a direct…
This vacuum attachment is meant for vacuuming in tight spaces. Specifically, it angles “down" along the long edge for concentrated suction.
I had an existing quick release mount from my normal camera tripod. But i needed a quick release base on my small desk tripod for usage of a dslr as webcam. With the print i can attache the existing camera mount (ground is round about…
Mit dieser Halterung befestigen wir unser Gardena Micro-Drip Bewässerungssystem an unseren Blumenkästen. Die Wandstärke der Kästen beträgt 4 mm und die Ausladung der Halterung 70 mm. Translation: DeepL We use this bracket to attach our…
From original broken part I modeled spare part of OneBlade attachment
This model is just for fun. I needed to print a bunch of Star Trek (TNG) communication badges for an activity, with only 1 day to complete them. Most of the models available online were either too detailed (overkill for my needs),…
Because I use them to wipe the print surface. Uses 2x M3 nuts, and 4mm, 6mm M3 bolts.
Prints best with no supports on the face of the model furthest away from the 3/8'' wrench.
A simpler classic back-scratcher tip for Scratch Attach! made by @design8studio . Sand down/trim seams to taste.
This is a work in progress, feedback is welcome. The two CAD pictures are V3 and the other pictures are V2. V3 pictures coming soon. I made this with the intention of being able to attach different portable monitors to a “tough” laptop,…
Context My sister runs early mornings with her child and has no good way of mounting a flashlight to her stroller. Design I designed this to attach to the front bars of the stroller and be adjustable for different flashlight angles.…
Nicwell water flosser attachment holder for 5 attachments Please post your makes :)
8020 1010 1"x1" curtain or bungee sliding attachment point
Petite attache pour accrocher la plante à son tuteur
I had a bunch of these whisk attachments left over from past hand mixers. This print turns them into normal hand whisks. Print them in PETG if you plan to put them into the dishwasher or use them to mix hot liquids. They have internal…
The nut on the Tormek grinding stones is fairly special: M12 2 flutes / splines 4mm pitch (!) This is a perfectly fitting spare/replacement part, should you need one.
The ClickTag is a nametag that was originally designed for a kinky event to enable people to show their contact interest and role. Attach or detach one or up to four of the color coded wings as your mood or interests change - they snap…
Students create different prototypes of a bird feeder and discuss their models and printed results. Students combine 3D printed parts with wood, plexiglas and plastic trash.
Wall mount for Ikea's Badring. This water sensor should actually lie on the floor, with the sensors in the floor to detect water. Now with this wall bracket you can connect other switches without having to do anything special to the unit…
I had this AQUAPUR adaptor for quite some time, but doesn't fit on my DREAME XR vacuum cleaner. So I remixed design from 3D Galaxy . I printed in PETG Infill: 30% or 40% Layer Height: 0.20mm Supports: Yes, organic If you like my work…
This is a custom vacuum attachment designed for the Dyson V11 Animal. It has a shorter body length as well as a smaller nozzle diameter to provide better suction and reach. I recommend printing it vertically as seen in the gcode. It's…
The model is print-in-place, no supports needed. Works best with headsets having a headband-depth of ~30-35mm. When the thumbscrew is in place, you can tighten the hook by turning it. Be careful not to screw it too tight. I used black PLA…
I made this remote control holder attached to the frame of light switch (for the always misplaced blind's remote control) and because I didn't want to drill or glue to the wall with the previous original remote control holder. It works…
This rotational hook aims to bring new functionality to otherwise often unused parts of our homes and workshops. As stairs typically have vertical posts and are often located near an entrance, I see an opportunity to improve the…
Turn any benchy into your new chopstick rest with this cute little attachment. It fits right into the storage compartment of your favorite 3dbenchy. There is plenty of tolerance given, so your machine doesnt have to be calibrated…
The metal liner of this attachment piece fell out and the knob became really loose on the oven. I changed the internal diameter of the plastic attachment piece so that it friction fits onto the metal rod on the over. The knob costs $40+…
Bracket for attaching the Aqara motion sensor to the wall or to the included hook that fits on (my) stairwell. There is a recess in the hook for inserting a magnet.
Print the male2male long flat side down Print the female 2 female like a teardrop The long one can also be printed with flex or tpu to give that real wonky feel The grooves in each allow you to stick in a toy like a ribbon or a…
FR: Juste un petit truc modélisé pour mon colocataire pour aller jouer au football en salle. Il joue "à l'anglaise". Un peu violent et brutal, tout ce qu'on aime :) Du coup, pour retenir ses lunettes et pour ne pas payer 10€ pour un…
I had to mount a head on the body of a dressmakers mannequin for my wife’s tailorwork. I found this great model of a full-size voronoi head by Dinalab on printables - already sliced in two parts for printing- and added a base to the…
Attach your Samsung Galaxy Watch / Active Wireless Charger to a table. After printing, glue or screw it on the bottom of the table. Then just place the wireless charger Tested with the original wireless charger of a Samsung Galaxy 4. I…
You will need a M3x30mm bolt and a M3 nut to insert in it. It can be installed with M4 or M3 wood screws. Printed on MK4s 4 perimeters 0.2mm PETG Organic support on the build plate
This item is no longer needed in my latest path design - https://www.printables.com/model/555238-mmu3-filament-path-design What this is: A single strong mount clip to attach the Prusa MMU2S Spool Holder trays specifically to the Home…
Modified with Tinkercad and sliced with Cura
Overview This custom-designed stand is made specifically for the Philips MG5720 Multigroom trimmer. It offers a neat and elegant storage solution while integrating the charger directly into the base. Just slide your trimmer into place –…
This is an old, generic percussive (thumping) back massager that came with a couple heads, a rounded one and a bumpy one, and my spouse requested a pointier version of the rounded head to target muscles better. I measured the threads on…
Dust collection with 58mm attachment for vacuum. Replaces Dust Nozzle 416497-7 and has attachment for existing vs direct attachment of 58mm vacuum. Print Settings Printer brand: Prusa Printer: i3 MK3 Rafts: Yes Notes: I printed using…
This 3D printable ring fits securely around a Hydro Flask wide mouth bottle and provides a built-in loop for attaching a paracord handle. It's a simple, rugged solution for carrying your bottle on hikes, at the gym, or just around town —…
Nozzle Holder attaches to Prusa MK3 series. Separate size inserts for easy identification. Also holds wrench from E3D Fun Pack. Insert Sizes/Types .10 .15 .25 .30 .35 .40 .50 .60 .80 1.0 HS SS NP C B OR Print hole side down Inserts need…
Turn your robot vacuum into a legendary knight on a quest! Left side of the Sword (Excalibur) Right side of the Sword (A.D. 1136) This 3D-printable kit includes: Front Sword — a blade that declares your cleaning crusade. 2X Side Blades —…
This is a remake of As-seen-on-TV item, called Dust Daddy. In principle, it's just some straws and adapter. Straws should be purchased separately from the store. This version uses 9 of them, and they just friction-fit into the holes.
Minimal through-bolted mount I designed for my Robust live center and ring drive center attachments… https://www.turnrobust.com/product/live Also fits similar ¾-10 centers by OneWay, Savanah, etc. The weight is on the through-bolt or wood…
This model uses the recess on either end of the cooler to attach wheels. This model is split into two pieces to allow printing on a MK4. The wheel attachment is held on with a ratchet strap that is threaded though the slots on either end…
You have to have the gripper attachment.
This innovative model is specifically crafted to enhance the Xiaomi Round Button by adding a functional and aesthetic glow-in-the-dark attachment. Perfect for those who need to locate their device in low-light conditions, the attachment…
Dyson Outsize Absolute+ Vacuum Seal Bag Attachment I created this using the template from @M3D3. You can use it from most newer Dyson stick vacuums.
🌟 Introducing LumiClip The ingenious glow-in-the-dark attachment 🌙 that brings a combination of safety, style, and versatility to everyday items. LumiClip shines brightly in the dark, ensuring you stay visible and your items are easy to…
A wall mounted attachment holder for Eureka RapidClean Pro Cordless Vacuum. Made specifically for the two attachments which come with model NEC280TL, which the manufacturer neglected to provide a suitable storage solution. The arms…
Für unsere Bonsais brauchten wir ein Regal auf dem Balkon. Die Regale sind oval, innen ca. 25 mm tief und haben die Innenmaße 170x130 mm bzw. 190x150 mm. Die Befestigung erfolgt über eine Klemmvorrichtung am Balkongeländer. Das Rohr hat…
I needed a hook to hang Christmas stockings from a shelf. This hook works for shelves between 35 and 45mm thick. Print instructions Doesn't need any support, prints in two pieces. PLA 0.2mm layer height. Share photos if you print =)
Super easy way to convert a pan motor to a mini turntable. Can also be used as a drive wheel or invert to use as a small camera stand. The rear side features a 8x13mm hole to fit a threaded ¼ insert. Print it face down with PLA, I…
Press fit for 3mm lightpipe and 5mm LED
The model contains a 5mm spacer for 2 80mm Fans and the attachment for the 240mm radiotor. I used this model to cover up the fans https://www.printables.com/de/model/373460-hexagon-fan-cover-80mm-120mm-140mm/comments/1557508
Modif câblage mmu2s avec une prise molex et une attache imprimé pour y fixer sur l'imprimante pour sécuriser les prises et éviter tout soucis et qui passe a coté de la fixation du rmu Visserie: 1 vis M3x14 pour trou existant dans le cadre…
The attachments of your IKEA PAX KOMPLEMENT bar broke? No problem, this is your replacement. The original screws fit. You have to place the attachment on both sides of the bar before you mount them (with the original attachment, you slide…
The vortex genie 2 in my lab has a special attachment which made it difficult to vortex microcentrifuge tubes and use it for the brief vortex of conical falcon tubes. So I designed this attachment to tape it on top of the original…
Je n'ai pas trouvé de pièce de remplacement dans le commerce. Celle ci n'est pas identique à l'originale, mais permet une attache propre de la coque avec un petit clip métalique tout en laissant passer la vis en son centre. Le fichier…
Zur Befestigung von Fensterdekorationen mit Abstand zur Fensterscheibe eignet sich dieser Haken. Der Haken wird durch eine Schnappverbindung in den Winkel eingesetzt und kann leicht entfernt werden, um z.B. das Reinigen des Fensters zu…
Reinforced bottle attachment to replace the broken original in the humidifier-flavoring night light fumigator
Enhance the versatility of your Portable Zyliss All-Purpose Vise with these 3D printable rotating grippers! Designed to hold pipes, dowels, and circular objects securely, as well as position square pieces of wood diagonally, these jaws…
My elk call didn't come with a way to attach it to me or my gear. So I designed this for that purpose. It is specifically designed to fit on an enchantress elk slayer call tube but would most likely work on other call tubes with similar…
Make your pre‑shot routine easier, faster, and way more comfortable using the “Tee Off Buddy”. Great for those that have trouble bending to place the tee and ball on the ground and retrieving the tee post shot This quick‑connect golf ball…
I put together this hanger to have a place to store all of the attachments for our KitchenAid stand mixer. The pieces press-fit together... I secured mine to our cabinets using 3M double-stick tape, which serves two purposes... keeping…
Just a hanger for kitchenaid mixer attachments. You'll need #6 countersunk screws to install them. (I only had #8 screws on hand so the screw heads are sitting a bit proud in the photo) Edit: added the step file for anyone who wants to…
I have a pedestal drill, but it is guarded by two fearsome miniature goats, and it's not suitable for every project. I wanted a way to use my hand drill accurately for quick jobs, by adding a way to ensure holes were straight/square, plus…
The vice can be adjusted in two different angles and there are several attachments that you can easily change, if you don't like the attachments I have made you can make one yourself, with the drawing with the dimensions as a PDF in the…
The must have tool for your workbench !!! Only 3,52 gram's !!!
VIDEOS These two short videos explain everything: NEW New as of January 28, 2026 — The following additions and improvements were made: Now the boxes can be mounted on the sides of the printer. Click here: New as of January 27, 2026 — The…
Heads-up: There is now a beefier version 2, in case you have grandkids who tend to break stuff while playing with it. :-) https://www.printables.com/model/1499800-scratch-attach-printed-telescopic-back-scratcher-v This short (90 sec.)…
This is a full remix of the excellent Dyson tool wall mount bracket by richieclarkie ( https://www.thingiverse.com/thing:4097193 ). I needed a stronger version because the brackets with screw holes had a 90-degree angle which was a weak…
Plugs for original wall-attaching inserts can be rotated while pushed into the inserts. And I didn't like it at all :) So I designed a version that will always be in the correct position. Designed for ~4 mm diameter countersunk screw.…
router attachment for dremel
Although these are standalone accessories, they were created with my "Gutter Square Downpipe Diverter Twin Access" in mind : https://www.printables.com/model/1637492-gutter-square-downpipe-diverter-twin-access Parts Required To Purchase :…
Intended to be mounted under kitchen cabinet for storing mixer attachments. Secured with 2 screws. Intended to be printed on its side with supports.
attachments for the Kaercher WD series vacuum cleaner. the head attachments slide on and off so no alteration needed. will also fits any unit that uses 35mm attachments support needed for most of the attachments. step fil include feel…
This simple attachement will let your Benchy float in less than an hour of printing time! I printed mine with NO INFILL , and i recommend using tree supports , they are very easy to remove. Please make sure to check out my other benchy…
The current mount contains very thin walls, therefore it is very fragile, I redesigned the mount, now it is monolithic.
Holds 4 panels together.
Reccomended model: Medium Flow Try printing in TPU/PEBA or other flexible filament for a good seal, otherwise, I cut a small gasket out of paper which worked well. I have also included a Gasket model which can be printed out of flexibles…
