Search results: ball

Sort order

13,878 models

P
PrintablesGonz Heredia

Pokeball

Hello again! I had been wanting to make a Pokeball with my printer for a while, and although I had initially thought of using one of the existing models, this time I wanted to make the model from scratch. I was inspired by several of the…

Downloads
12,997
Likes
5,953
Rating
4.86
P

Christmas Balls, Single ribbing

Christmas ornaments in the shape of balls. Available in three sizes: 40, 60 and 80 mm. Different number of ribs (depending on the size of the ball): 10, 14, 18 and 22. Rib width 3 mm. Print the bottom part with a support so that the curve…

Downloads
6,572
Likes
1,432
Rating
4.95
P

Christmas Ball, full cross ribs

Christmas tree ornament. 6 variants (3 sizes: 40, 60 and 80 mm, different number of ribs). Print with supports on the print plate to increase stability. ❗Large balls with dense ribbing are heavy (approx. 120 g).

Downloads
6,285
Likes
1,358
Rating
4.92
P
PrintablesMargel

Death Star Christmas Tree Ball

Prints fine with 10% infill. Print at .10 layer height for maximum detail. Glue together.

Downloads
5,626
Likes
1,748
Rating
4.92
P
PrintablesKingTut

Airless basketball

This mini basket ball can be fully printed in pla and bounce very well from any (reasonable) height. I've found it works perfectly for indoor games such as passage cricket or any other creative indoor games. This ball was inspired by the…

Downloads
5,351
Likes
215
Rating
3.56
P
PrintablesDazus K

Christmas Ball with Intersecting Diamonds

Update: I've uploaded new PrusaSlicer 3MF and GCODE files (look for “New settings” in the file names). These keep the hot end at 190C and use other techniques to cool the filament, so it's less likely to clog. I made a few other changes,…

Downloads
5,212
Likes
1,438
Rating
4.86
P
PrintablesFC2M3D

Balloon Dog Keychain (Remix)

I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊

Downloads
3,612
Likes
734
Rating
4.45
P
Printablesgoodjobswe

Toothpick Pocket Ballista

Travel back to the siege warfare era with the Toothpick Pocket Ballista. This miniature mechanical marvel takes inspiration from the powerful weapon of ancient times, perfectly sized to fit in your pocket. Ideal for history enthusiasts,…

Downloads
3,605
Likes
1,327
Rating
4.91
P
PrintablesAdam

Marble run ball/sphere in two parts (24mm, 30mm, 40mm, and 50mm)

This is a sphere printed in two parts with a threaded connector to attach each piece. Its design allows printing without supports, which gives a nicer finished look to the part. You can also mix and match colours! Use a dab of super glue…

Downloads
2,610
Likes
168
Rating
4.94
P
PrintablesTheRooster

#NoWalls Standard Dungeon Tiles (OpenLock/MagBall)

NoWalls Standard Dungeon Tiles (OpenLock/MagBall) ================================================== Part of my #NoWalls Modular 28mm Dungeon Tiles Collection UPDATE 2:* Once again I have updated the files. These are now at Version 4. The…

Downloads
2,502
Likes
564
Rating
4.85
P
Printablesrevbem

Football Stand

I couldn't find a Football Stand matching my preferences. So I designed my own ;-) Matches the original football size (HxLxW 7x12x7 inches / 17.78x30.48x17.78 cm). But even works with smaller sizes. The stand can also be used in asymetric…

Downloads
2,364
Likes
137
Rating
4.94
P
Printableserickson85

Prusa MINI/MINI+ Squash Ball Feet System & Spool Holder

Remix of Squash ball feet for Prusa Mini. All brackets bolt into aluminum extrusions and support the electronic's box. Highlights: Massive Noise Reduction Improved Stability (Lifting the magnetic sheet won't tilt the printer) 6 Support…

Downloads
1,825
Likes
592
Rating
4.97
P
PrintablesYosuke

Squash ball feet for Prusa i3 mk3s

I found that there is well known idea to use squash ball for 3d printer feet for anti vibration. I made this model for my Prusa i3 mk3 by myself, so this is not really a remix but pretty much inspired by existing nice designs such as…

Downloads
1,801
Likes
390
Rating
4.96
P
PrintablesART TOO

Snowball Maker - Parametric

Be prepared for the toughest snowball battle's this winter !!! 4 Sizes: 80mm 120mm 150mm 180mm

Downloads
1,657
Likes
578
Rating
4.8
P
Printablesdancan13f

Prusa Core One/+/Gen2 OneL/+ Squash Ball Feet

I recommend using balls with blue dot; they are the hardest. ACCESSORIES Prusa CoreOne/+/Gen2 You will need 4 M3x6MM screws to fix them to the lower frame; this one has 4 threaded holes in each of the 4 corners as standard. Prusa…

Downloads
1,452
Likes
513
Rating
4.93
P
Printableslskaling

Snowball Maker

A snowball maker for 80mm (3.2 in) snowballs, battle-tested in the Alaskan outdoors. Prints in place without supports, and no screws required! I recommend reducing the layer height to 0.15mm to accommodate the overhangs. However, it…

Downloads
1,445
Likes
179
Rating
4.67
P
Printablesbuchnema

Ball Pump Needle

Because those metal needles break quite easily, I needed a quick solution to inflate one of our kid's toy basketballs. There are two version: with a DIN VG 5.2 thread, which can be found on most ball pumps with a thread like Schrader…

Downloads
1,443
Likes
46
Rating
5
P
PrintablesMarkoJ

Simple Water Ball Valve, Hose and Gardena Fittings (print in place)

This is a very simple emergency low-pressure water ball valve that can be printed quickly in place (print-in-place) and with no assembly. ver. 1 with 0,3 mm tolerances (in optimization, with comments…) Should be printed using mechanically…

Downloads
1,423
Likes
103
Rating
4
P
PrintablesSigismond0

Pokeball Plus Auto Catch and Spin

This is a little contraption that allows you to hold down the button on your Pokeball Plus, so that you can use it with Pokemon Go and automatically catch anything that triggers it. It's possible to to this with a rubber band or the strap…

Downloads
1,365
Likes
94
Rating
5
P
PrintablesSASSy Design

Ball Plant pot and Planter - Vase mode

A very simple yet beautiful design for a geometrical plant pot. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…

Downloads
1,318
Likes
324
Rating
5
P
Printablesrecall

Rubber Duck Snowball Maker

A rubber duck snowball maker.

Downloads
1,234
Likes
191
Rating
4.79
P
Printablessternli27

Car vent phone holder mount adapter ball joint ventilation clip

The clips supplied with the general car mounts don't hold well and that bothered me. Inspired by various similar holders, I came up with this version, which can be printed horizontally. The horizontal printing position improves the…

Downloads
1,206
Likes
150
Rating
4.9
P
PrintablesJohan87

Pokeball Switch Cartridge Holder

Not my design, found on Thingiverse: https://www.thingiverse.com/thing:3346103 which is a remix of https://www.thingiverse.com/thing:1615753 // Edit: Not sure but might be the same as…

Downloads
1,196
Likes
190
Rating
4.8
P
PrintablesRui do Carmo

Squash Ball MK4/MK3s/MK3s+ Vibration Damper V4.0

New version, more improvements (for some pictures scroll down): 100% print in place, NO SUPPORTS!!; Easier to print dovetails - more area to grab on the build plate!; Zip ties no longer optional nor required; Better tolerances - Easier to…

Downloads
1,154
Likes
285
Rating
4.91
P
PrintablesJV Lobo

Mini Basketball Game

Welcome to the wonderful game of Finger MiniBasketball! Slice settings: These are the main settings I've used for slicing the parts: Layer height: 0.2mm. There is one part I recommend printing at a smaller layer height, which is the net,…

Downloads
1,150
Likes
249
Rating
5
P
PrintablesTorsten B

Rapsodo Callaway RPT golf ball stencil

I used the Golf Ball Marker Template from Thingiverse (https://www.thingiverse.com/thing:3830902/files) an added the RPT pattern from the Original Callaway to it. For best fitting i had to scale to 101% maybe for your Printer you have to…

Downloads
1,134
Likes
79
Rating
5
P
PrintablesHD_Creator

Generic ball joints for camera mounts and other adjustments

For the articulated arm that holds the RaspberryPi camera on my Prusa Mini, I needed a way to fine adjust the viewing angle of the camera. So I opted to design a ball joint. I did a number of prototypes to try out how much the socket…

Downloads
1,101
Likes
109
Rating
5
P
PrintablesJustinB57

Paintball Marker Stand

This paintball marker stand was designed with the intention of being both simple and easy to use. Simply print both pieces out of high-quality PLA, screw the ASA adapter snugly into the marker, try to make one of the fins on the ASA…

Downloads
1,035
Likes
76
Rating
5
P
PrintablesCrocmagnon

Balloon knot tying Tool

Reupload from Thingiverse , all credits go to the original author: https://www.thingiverse.com/thing:4899580 When sharing, please credit “ Just printed 3D ”. Whatch the linked 1 minute video to see how to use this tool! Print instructions…

Downloads
1,015
Likes
91
Rating
4.8
P
PrintablesDazus K

Open Spiral Christmas Ball 2025

This is a fun and incredibly lightweight ornament that scales up and down beautifully. It's been printed as small as 25% and as large as 200%. I've provided my PrusaSlicer project file and GCODE for a Prusa MK3S+ printer at 100% scale.…

Downloads
978
Likes
218
Rating
0
P
PrintablesOpenFigure3D

Super Saiyan Son Goku - Dragon Ball Z - Bust Statue

The Legendary Super Saiyan! Celebrate Goku Day (May 9th, 5/9 aka Go Ku ) with this amazing bust statue, sculpted by mavile3d for OpenFigure3D, featuring my favorite look of Goku, when he first becomes Super Saiyan in his battle with…

Downloads
958
Likes
149
Rating
5
P
PrintablesOsfald

Window blind chain coupler/connector 3,5mm ball

Sometimes you will lose or break a connector in your window blind chain. This simple project will fix it so you can enjoy a working blind chain again. It is designed for chains made of balls with diameter of 3,0-3,5mm.

Downloads
927
Likes
206
Rating
4.95
P
PrintablesNoWayCall

Gashapon Capsule Ball

Goes into Tomy Gacha gashapon vending machine

Downloads
881
Likes
42
Rating
4
P
PrintablesFanofgenetics

Hotrod Racer Balloon Car - No Glue version

The Hotrod Racer Balloon Car by Polly-Jeanius is very cool, but it requires you to use glue, and I'm not particularly eager to use glue. Therefore, I have remixed the model using slightly modified axles from my building kit to allow me to…

Downloads
857
Likes
80
Rating
5
P
PrintablesMotolsky

Snowball maker

My snowball maker

Downloads
849
Likes
119
Rating
5
P
PrintablesAdrián Vidal

Fully parametric ball bearings

This design allows you to 3d print the casings that will make a ball bearing in combination with some bougth or even 3d printed balls. My chose was some steel balls that i bought on aliexpress but you can use whatever you want as long as…

Downloads
848
Likes
46
Rating
5
P
PrintablesIsaac

Baseball Cap Holder

Baseball Cap Holder This support-free wall holder is designed to hold a baseball cap. It was inspired by other similar models but I didn't like that they all seemed to either require supports or weren't designed for command strip…

Downloads
774
Likes
142
Rating
5
P
PrintablesLiouma

Squash ball feet: the most efficient system for Prusa i3 MK3/MK3S/MK3S+ or any 30 extrusion based printer, 100% printable

If you want a completely SILENT printer, print this and see bellow for TPU LCD panel support. Vibration dampers. Reduce noise and vibrations. This is the most functional design I could find or imagine based on existing models I could…

Downloads
758
Likes
166
Rating
4.8
P
Printablesjefftml

Balloon Letters

Celebrate whatever you want with these Letter Balloons made in Blender 3D. These letters were created with a high quality cloth simulation in Blender and baked into the objects so you'll get perfect results every time.

Downloads
749
Likes
120
Rating
5
P
Printablesfifindr

Mini Tabletop Basketball Flick Game

Use brim for launcher + tree supports for balls. A compact tabletop basketball game based on flick mechanics and precision. Place the ball on the launcher, press down, and release to shoot towards the hoop. The force of the press controls…

Downloads
740
Likes
264
Rating
5
P
PrintablesNycat

Pokéball Flexible Coasters – Gotta Print ’Em All! -No MMU

Description Show off your Pokémon fandom with these Pokéball-inspired coasters! Designed with a honeycomb mesh for a flexible, fabric-like look, they’re lightweight, quick to print, and a fun way to decorate your gaming setup or coffee…

Downloads
737
Likes
415
Rating
4.67
P
PrintablesMrozozoz

Pokeball treat toy for cats

This is simple pokeball toy for cats. You fill it up with the treats through the hole. As your cat rolls the ball the treats will fall out of it rewarding the cat. The model consists of 4 parts: two hemispheres, preferably one red and one…

Downloads
729
Likes
361
Rating
4.83
P
PrintablesAndreas Otto

Ender-3 V3 SE Ball Joint Filament Guide Shorter 1-piece print

Printed in PLA Plus, .2mm layer height and organic supports

Downloads
686
Likes
59
Rating
5
P
PrintablesNick Esselman

Sport balls, whole balls and half balls included

Whole balls and half balls included ALL 25% Scale Recemented. 20% infill, the more the heavier These are just for fun, and not intended do be used as real use balls. i use them to throw upwards laying down if i'm bored and thinking of new…

Downloads
674
Likes
19
Rating
5
P
PrintablesJustinB57

Paintball Marker Wall Mount

This paintball marker wall mount was designed with the intention of being both simple and easy to use. Simply print both pieces out of high-quality PLA, mount the wall mount to the wall using drywall anchors (use the screw holes in the…

Downloads
667
Likes
49
Rating
5
P
Printablesfiretech

Low Profile Squash Ball Feet for Prusa MK4/S, MK3.9/S, MK3.5/S & i3 MK3/S/+

I liked the look of @Yosuke's Squash Ball Feet , but the added height compared to the stock feet (~10mm) made the MMU3-to-extruder tube rub against the ceiling of my enclosure just a bit too much, so I loaded in the model in Fusion 360…

Downloads
647
Likes
204
Rating
4.92
P
PrintablesPeter Farell

Minnesota Timberwolves NBA Basketball Team Logo

Minnesota Timberwolves NBA Basketball Team Logo

Downloads
646
Likes
68
Rating
4.67
P
PrintablesCalebTimoteo

Baby Yoda (Grogu) with Ball - Star Wars Home Decoration

Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.1-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)

Downloads
624
Likes
86
Rating
5
P
PrintablesGrzegorz Z.

BallBearing spool holder for (Un)orginal Prusa Drybox

I didn't like the friction of the steel bars, it was kinda hard to spin the spool even by hand.. So here is my mod: ball bearing spool holde r for (un)Orginal Prusa Drybox. The mount holes are for original , 18mm, bars. There is a version…

Downloads
615
Likes
110
Rating
4.87
P
PrintablesBens

Bird feed fat ball - Vogelfutter-Meisenknödel-halter

Bird fat balls are sold without net (yeah not rubish) - but you need a cage to offer them to the birds. I started to use the thingiverse model below, but had problems to print. So I constructed a new version - easier to land and print ;-)…

Downloads
610
Likes
41
Rating
5
P
Printables3DNase

collectible card box (Pokemon, Magic, Baseball)

Cardbox with dividers. no supports needed.

Downloads
606
Likes
89
Rating
5
P

Christmas Ball, full single ribs

Christmas tree ornament. 8 variants (3 sizes: 40, 60 and 80 mm, different number of ribs). Print with supports on the print plate to increase stability. ❗Large balls with dense ribbing are heavy (approx. 100 g).

Downloads
600
Likes
108
Rating
5
P
Printablesscubam@xx

Ball Chain Replacement Clip

This is a replacement connector for vertical roller blinds with a ball chain. Ball diameter: 4.5mm Ball distance (center-center): 6mm The pieces usually stick together well, but a small drop of super glue can be used if you want. If you…

Downloads
590
Likes
100
Rating
4.82
P
Printableserickson85

Prusa i3 MK3 MK4 Squash Ball Feet System

Highlights: Noise Reduction Improved Stability. Reduces VFA & Ringing/Ghosting. 6 Support Points without increasing operational footprint. BOM: Print 6x Foot & 6x M6 Slot Nuts 6x Squash Balls (double yellow dot) 5x M6 x 12mm Bolts 5x M6…

Downloads
573
Likes
138
Rating
4.91
P
Printablespjp_innovation

Modular ball circuit cat toy

Modular ball circuit for cats Create a custom layout that suit your need and change it as many time as you want !! No glue needed !! Everything is slide locked together. Pet safe !! You can upgrade it by the time, disassemble for storage…

Downloads
563
Likes
207
Rating
5
P
PrintablesJA:GR

Rugby ball All Blacks

I finished the model on the mini rugby ball just few hours before the final game starts in France. I will keep my fingers crossed to All Blacks. I could add it my mini balls collection.

Downloads
563
Likes
21
Rating
5
P
PrintablesPrintical

Pokéball Display Stand

A Minimalistic and Super Fast Print to showcase your Pokéballs by @yoyothechicken

Downloads
551
Likes
54
Rating
5
P
PrintablesPeter Farell

Balloon Boy

Balloon Boy from Five Nights at Freddy's

Downloads
538
Likes
54
Rating
0
P
PrintablesPeter Farell

Drill Bit Ballerina Gru

Drill Bit Ballerina Gru. (Part of my stupid dangerous toys collection) Tiny ballerina not included.

Downloads
519
Likes
95
Rating
0
P
PrintablesTamer

Cats toy with ball

[ENG] Hi, A simple printable cat toy: - The whole toy can be printed without dividing into parts - built-in supports under the ball (after printing, just slightly tear it off with your fingers and remove the supports) - fast printing (by…

Downloads
514
Likes
115
Rating
5
P
PrintablesFC2M3D

Balloon Dog Keychain

Easy to make a Balloon Dog keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Downloads
510
Likes
101
Rating
5
P
PrintablesFanda

Ball

Tento míček je rozdělen na dvě poloviny s výrazně odlišnými barvami: jedna polovina je jasně červená a druhá jasně zelená. Povrch míčku je hladký a lesklý, což vytváří atraktivní vizuální efekt. Pro 3D tisk je ideální rozdělit míček na…

Downloads
502
Likes
37
Rating
5
P
PrintablesDany Sánchez

Trionda FIFA World Cup 2026 Ball Coaster

🏆 World Cup 2026 ⚽ The Adidas official ball for the 2026 FIFA World Cup has been revealed, called TRIONDA. It features a triplet design of: Canada, represented by red and a maple leaf USA, represented by blue and a star Mexico,…

Downloads
500
Likes
41
Rating
5
P
PrintablesMato

florball ball

this is florball ball for playng florball

Downloads
480
Likes
18
Rating
4.75
P

Pickleball Ball Marker

Customizable stencil for marking pickleballs to be able to easily tell which ones are yours. I've included the original stl shell that fits 73mm diameter (standard) pickleballs (I tested this on Onix pickleballs, shown in pictures.) Load…

Downloads
478
Likes
80
Rating
0
P
Printablesishikawats

Skelly Eyeball Skull

This is the bony buddy of previous model Ghost Whistle : https://www.printables.com/model/604285-ghost-whistle Skelly Eyeball Skull has movable eyes and a movable jaw. There is an optional stand but the skull can also stand upright on its…

Downloads
477
Likes
140
Rating
4.83
P
PrintablesFightTheFoo

Hinged & Latching Pokeball Card Box

These deck boxes are hinged and have a latching feature that allows you to open them by pushing the button on the front of the Pokeball. Print a base, top, hinge, and button for all versions. The great ball requires additional “Great Ball…

Downloads
476
Likes
143
Rating
5
P
PrintablesRoary Labs

Soccer - football shirt keychain

Support your favourite team with a nice keychain! Print it with multimaterial or by layer to obtain a nice final color effect! You can find the .3mf files ready for multimaterial printing, just choose your favourite spools of colors.…

Downloads
472
Likes
25
Rating
5
P
PrintablesForeman

Cat Ball Toy with Rattle

Simple cat toy ball with rattle. The rattles were printed in different colors than the balls and dropped in during a pause when printing the ball. I found producing good results with minimal warping on the lower half of the ball requires…

Downloads
469
Likes
72
Rating
5
P
PrintablesSpool Designs

Bowling Ball MMU

Scale Sized Bowling Ball, Drilled 3 Prints House Ball Single Material Print Finger Grips Ball With or without CoG marker (CoG marker hard to see at smaller scale, better to go without usually).

Downloads
465
Likes
23
Rating
5
P

Christmas Balls, Cross ribbing

Christmas ornaments in the shape of balls. Available in three sizes: 40, 60 and 80 mm. Different number of double ribs (depending on the size of the ball): 6, 10 and 14. Rib width 3 mm. Print the bottom part with a support so that the…

Downloads
452
Likes
98
Rating
5
P
Printablesuping1

Pickleball trophy

5/7/2024 UPDATE: I updated Trophy_v7.3mf to enable editing of the “#1 Dinker” text. I also added STLs for 1st, 2nd, and 3rd place. Enjoy! ================================================= I designed this primarily in Fusion360 and tied…

Downloads
445
Likes
57
Rating
5
P
Printableseyalshtark

Extra long vortex tube and ball

A very long vortex tube with spinning ball. Printed to the height limits of the Prusa MK4. No supports needed for the tube, only a brim. Supports needed for the ball. Lower the print speed to 70- 60% for the top third of the vortex tube.…

Downloads
444
Likes
46
Rating
4.6
P
Printableszbuser

Tippmann A5 Paintball Trigger Assembly

NOTE: I just tested this with my marker chrono'd for the first time and it does not work at full power. The sear spring is just not strong enough to get that sear back up in time. I'll work on that and get an improved sear spring uploaded…

Downloads
432
Likes
42
Rating
0
P
PrintablesDroodle

Anti-vibration, Squash ball feet for stone / concrete slab

The dovetails could use some optimization, but it works. They disable the need for supports when printing. I use 6 balls under my granite slab just to give some extra support in the back since I have my spool on the printer (and I had 2…

Downloads
410
Likes
156
Rating
4.95
P
PrintablesJustinB57

Paintball Marker Setup Wall Mount

This paintball marker setup wall mount was designed with the intention of being both simple and easy to use. Simply print both pieces out of high-quality PLA and then do the following: Mount the large tank holder to the wall using drywall…

Downloads
388
Likes
44
Rating
5
P

PokéBall Pencil Holder

This PokéBall-inspired pencil holder is split into separate parts for easy multi-color printing. The button is printed as a standalone piece and should be glued on after printing. The model is designed for three-color printing — either by…

Downloads
378
Likes
251
Rating
5
P

Christmas Ball, full body with ribs

8 variations of Christmas tree ornaments. Single and double ribbing. 3 sizes: 40, 60 and 80 mm. Print with supports on the plate to increase print stability.

Downloads
377
Likes
85
Rating
5
P
PrintablesAaz Things

Low-noise ping pong ball

A low-noise ball if you want to play ping-pong against the wall at home but have troublesome neighbors. Generated in MeshMixer in a couple of minutes. It's sturdy enough and very quiet. Easy to scale. Default print settings: PLA 0.2 brim…

Downloads
366
Likes
23
Rating
0
P
PrintablesPeter Farell

Golden State Warriors 3D Basketball Logo

Golden State Warriors 3D Basketball Logo

Downloads
360
Likes
33
Rating
0
P
PrintablesAmmar Faridi

Floating Ball Toy

One of my childhood memories.. Print instructions Use supports on basket and ball

Downloads
354
Likes
52
Rating
5
P
PrintablesPeter Farell

Snake Wrapped Around Crystal Ball

Snake Wrapped Around Crystal Ball

Downloads
353
Likes
129
Rating
5

Banksy's Girl with Balloon - 3 Color w/filament changes (1 at a time)

Start with White, then go Black, then Red last. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…

Downloads
352
Likes
143
Rating
4.8
P
PrintablesAugust Johnsen

Padel Ball Pressurizer

This pressurizer is designed to keep your padel balls under pressure after play. By preventing air from escaping the balls, they remain bouncier and better suited for consistent performance. This helps extend the lifetime of your balls…

Downloads
350
Likes
25
Rating
5
P
PrintablesChmNrd

HoverBall Nested Cat Toy (Organic Support Test)

HoverBall Nested Cat Toy (Organic Support Test) I wanted to create a model that was fun for both the maker and their feline friends! This design is a set of hovering nested balls that highlight PrusaSlicer's (version 2.6+) new organic…

Downloads
335
Likes
45
Rating
4.5
P
Printablesalphastratus

MK3s Z spindle ball bearing

This is a little mod for the MK3s to add a 608 ball bearing per Z spindle at the top end. The Z motors need to be a few mm higher (additional length of the spindles at the top end to fit into the bearing) so there also new mounting parts…

Downloads
335
Likes
29
Rating
5
P
Printablesbsfiosco

C920 Ball Joint Mount for Articulating Camera Mount for Prusa MK3 and MK2

This is ball mount joint for a Logitech C920 camera that allows it to directly attach to the ball nut from the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2. This allows you to remove the standard mount from the C920 and…

Downloads
335
Likes
85
Rating
4.83
P
PrintablesZadrix

golfball

simple golfball.

Downloads
310
Likes
9
Rating
0
P
Printablesjedisct1

Banksy's Flying Balloon Girl

Print with black, and add a color change around 1.30mm to switch to red. Use 0.10 or 0.20mm layers. The model can be safely downsized for a Prusa Mini.

Downloads
309
Likes
77
Rating
5
P
PrintablesDanae

EARRING PENDANT WHALE BALLENA

I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…

Downloads
308
Likes
82
Rating
4
P
PrintablesC0PATHUK

Baseball Bats Puzzle

Baseball bats puzzle. Can be used as a ball stand. When printing, you need to match the flow to the plastic. So that the parts fit tightly when assembled. I came across a video on YouTube with a similar metal puzzle. I decided to make my…

Downloads
302
Likes
63
Rating
5
P
PrintablesPSPS

Prusa Mini Base Squashball Legs

Wanted to put my upgraded Mini on Squashballs for noise reduction. I didn't modify the inserts to continue working with the USB drives and USB port since i did not use those features and had some trouble with Fusion360, so i just made…

Downloads
300
Likes
65
Rating
4.92
P
Printablesfuchsr

Ball-style Filament Guide for Prusa i3 Mk3S

This is a filament guide for the Mk3S that implements @Nerys's rotating ball mechanism. I've been using this kind of filament guide on my other printer makes for a long time and finally decided to adapt it for the Prusa i3 Mk3S. Do you…

Downloads
293
Likes
53
Rating
5
P
Printableselcubano

Another Plant Rooting Ball

Cut about 25mm/1in of the peel/bark of the branch you want to propagate. Fill each side with compost or potting soil. Encapsulate the branch and secure with zip ties. Add water to the top of the ball at regular intervals to prevent the…

Downloads
291
Likes
56
Rating
4.5
P
PrintablesiEatHands

PinHoist - Pinball Playfield Jack Hoist

PinHoist Print your own PinHoist for yourself and friends. Print the left and right Body from PLA or PETG and print 2 of the inserts using your choice of flex material. I used 10% infill on both the body and the insert. I printed both…

Downloads
283
Likes
28
Rating
4.67
P
PrintablesBorderbox

Spinning Beach Ball - Motor Rotation Indicator

What better way to indicate a busy printer than the spinning beach ball. Since the blades are modular and snaps together, you can mix and match colors to create your own custom spinner. You don't even have to use all six blades, use two…

Downloads
281
Likes
31
Rating
5
P
PrintablesHow._.

Crown Spherical Holder (Bowling Balls, Helmet Stand + More)

Hello, Two things happened that lead to this design being conceptualized and linked. Bowling balls being precariously perched on seats/tables at the risk of falling while being cleaned after games Helmets being precariously perched on…

Downloads
280
Likes
26
Rating
0
P
Printablesineichen

BALLPOINT PEN MECHANISM

Ever wondered how a ballpoint pen mechanism works? This is how it works. Simply print out these parts and have a look on how it's made. No support is needed. And with the following assembly video you are good to go. To ensure proper…

Downloads
279
Likes
67
Rating
5
P
PrintablesMoyYep

Fun Ball Cat Toy

Watch as your cat has the best time of its life. Notice that the top half of the ball is hollow. Most of the mass is in the bottom, meaning that when your cat slaps the ball it will keep wobbling. Use supports everywhere so it doesn't…

Downloads
274
Likes
44
Rating
0
P
Printablesdavidconger

Football Bowl for Snacks or Candy

A vase-model printable American Football shaped bowl for snacks or candy. Shown here in MatterHackers Quantum PLA Purple/Gold as a gift for a UW Football fan. Personally, I prefer an 80% scale for this model. There is also a plug you can…

Downloads
267
Likes
43
Rating
5