23,446 models
Design for Large eggs (60mm). Choose between 12 or 18 eggs size Fits on PrusaMINI bed After print you could remove the center column. Check some of my paid model at: https://cults3d.com/en/users/Cisco3D/creations Important : IF YOU LIVE…
Print approx. €10.21–€12.48 excl. taxPreliminary estimate for one variant
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
This Print-in-Place truck is something more than it seems to be. The connectors on the back can hold one of many attachments, such as a Dump Bucket or Wood Transport extension with a crane, all of which can be downloaded from here:…
Print approx. €5.36–€6.55 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)
Print approx. €7.23–€8.83 excl. taxPreliminary estimate for one variant
***UPDATE*** I've had a couple of suggestions come in (thank you @Roman_1037762!) that I'd like to implement over the next couple of days. The first of which is a clockwise flow for folks south of the Equator. Or maybe you just have a…
Print approx. €11.13–€13.60 excl. taxPreliminary estimate for one variant
This is a little stackable Storage Box. You can print it with the draft setting and it works just fine. There are two types, one stackable, one non stackable. They are nearly identical. Hope you have fun printing and can use it!
Print approx. €11.25–€13.75 excl. taxPreliminary estimate for one variant
This mini basket ball can be fully printed in pla and bounce very well from any (reasonable) height. I've found it works perfectly for indoor games such as passage cricket or any other creative indoor games. This ball was inspired by the…
Print approx. €3.40–€4.15 excl. taxPreliminary estimate for one variant
***CHECK UPDATES BELOW*** Summary My print: https://youtube.com/shorts/qCkzSldsGnc?feature=share I wanted to challenge myself to design a March Madness trophy, so here's what I came up with. I designed it at 207mm height, and because of…
Print approx. €14.38–€17.58 excl. taxPreliminary estimate for one variant
NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
I created the stackable version of my Organizer/Basket for Drawer at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High Profile 204.0 124.5 117.5 Standard Profile 60.0 Low Profile…
Edit: I also tried a different approach here: Let's build...Drybox v2! by Ren | Download free STL model | Printables.com You can find many single parts, videos or blog posts regarding dryboxes. When I realized I have stringing problems…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
This model has been verified for compatibility using a GoPro Hero 4 case. It is not an official GoPro part — geometry recreated for functional interoperability. Dimensions: Diameter (x, y): 29.5 mm Height (z): 17 mm Hole size: M5 screw &…
Recommend printing in PETG Personally I printed it Gyriod with 20% infill and 5 layered walls for extra resistance. FOLLOW Radical Maker’s instructions for more details. ***DO NOT put full strength into the clamp it will possible snap…
Wide woven basket, diameter 170 mm, height 80 mm. Printed with Prusament PLA without any supports. Sliced in PrusaSlicer 2.7.0. with Input Shaper.
Print approx. €10.92–€13.35 excl. taxPreliminary estimate for one variant
🇷🇺 Добро пожаловать в Россию Welcome to Russia Important Note: Artemio García started creating this model for MiniWorld3D several years ago. When he finally finished it, the war between Russia and Ukraine had just started. We decided to…
Print approx. €3.72–€4.55 excl. taxPreliminary estimate for one variant
Minor remix to clean up some artifacts and details from when @henry remixed an older design previously. Super useful little bins. Prints nicely for me in PLA at 0.3mm, 20-100% infill.
Print approx. €5.80–€7.09 excl. taxPreliminary estimate for one variant
Some not required material (in my opinion) was removed to decrease printing costs and duration further. Main features: Two magnets for each segment with press fit (6x2mm). Minimized material costs, the gridfinity boxes are fixed only by…
The magazine base plates will fit original Glock 2-row magazines in “normal size” calibers: 9x19mm, .40 S&W, .357 SIG etc. e.g. for the Glock 17/34/21… I recommend to print them standing upright with a brim and set the slicer to finish…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Based on the linked original models. GCode includes Organic Support. 3mf file, as well i suggest to print it with painted on support.
Print approx. €5.60–€6.84 excl. taxPreliminary estimate for one variant
About the Smart Storage basket: The Smart Storage slide-out hanging basket is used for storage of various items. It can be used to storage food in the refrigerator, in the office for storage of office supplies or in the garage for storing…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for PETGSource material: PET
1/100 Scale MG Gunpla Model Base. No Assembly Needed.
Print approx. €4.75–€5.81 excl. taxPreliminary estimate for one variant
Darth Vader Bust - on a base with lettering Printer : Flsun V400 layer height : 0,1 line width : surface 0,4 ; inner outer wall and filling 0,6 Scale 100 % no support ; Lightning infill 25% ; print time ~ 14 h JAYO PLA Meta Black…
Print approx. €9.67–€11.82 excl. taxPreliminary estimate for one variant
This is a remix. I didn't design this nice model, I've only converted it in STL and added a base. The original model and author here https://sketchfab.com/3d-models/spiral-a4e84079db884dddbc2e980b44ce8cfd kylie Printed @0.15mm with PLA:…
Print approx. €8.48–€10.36 excl. taxPreliminary estimate for one variant
🇻🇦 ¡Benvenuti in Vaticano! Welcome to the Vatican! The world has a new Pope, Leo XIV, and on this occasion, MiniWorld3D is bringing a major landmark of Rome and the world to our library. This entry is a highly-detailed model of St Peter's…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
When I design the Ultimate router jig, ( https://www.printables.com/model/847294-ultimate-router-jig) , I was not able to find a trim router base wich can be easiliy printable without support. For this reason I decided to design my own…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
My first mashup :) There are 2 versions. Table and hanger. For hanger it takes 5x5x5mm hock. stl-s have an error as the bottom is not flat. On my PC it took me 1.5 hours to make hanger variant, so I decided to cut it in slicer. 3mf files…
Print approx. €5.99–€7.32 excl. taxPreliminary estimate for one variant
Basketball ball suitable as decoration. There is still a pedestal planned, during this week I will add a version with a pedestal. Print instructions printer Prusa MK3 0,2 quality infil 15% filament PETG
Print approx. €12.57–€15.36 excl. taxPreliminary estimate for PETGSource material: PET
Small woven basket, diameter 80 mm, hight 60 mm. Printed with Prusament PLA without any supports. PrusaSlicer 2.7.0 with Input Shaper.
Print approx. €3.50–€4.28 excl. taxPreliminary estimate for one variant
**************** If you download 💾 or collect 🗄 please hit the LIKE 👍 button. 😀 If you print 🖨 it post a picture 📷 / MAKE ! 😄 Let me know how it works for you.❔ 🙂 Don't forget you earn Prusameters🧵 when you post a MAKE ! ****************…
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for one variant
This is just test Gcode, for more info (userguide) please look at: https://3dlabprint.com/shop/cessna-152-based-trainersport-plane/
Print approx. €4.68–€5.72 excl. taxPreliminary estimate for one variant
Welcome to the wonderful game of Finger MiniBasketball! Slice settings: These are the main settings I've used for slicing the parts: Layer height: 0.2mm. There is one part I recommend printing at a smaller layer height, which is the net,…
I created the Hexagon Pattern Version of my Stackable Baskets Organizer System with Lids (Circle Edition) at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High 204.0 124.5 117.5…
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant
Captain Jack Sparrow from Pirates of the Caribbean with base.
Print approx. €9.95–€12.16 excl. taxPreliminary estimate for one variant
Globe stand is compatible with all lamp globes by @FritzPeppone published here: https://www.printables.com/model/1087513-solar-system-lithophane-planet-lamp-collection Compatible with E27 bulb socket adapter like this one found at OBI:…
Print approx. €6.12–€7.48 excl. taxPreliminary estimate for one variant
Printing instructions: Add some extra veritcal shells to increase durabilitie of the wings Remove “Elephant foot compensation” to make the connection link at the tail wing work. Let the model cool down after printing. Removing it while it…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Gridfinity base grid for Festool Systainer 3 toolbox. Print 4 pieces and glue together or just in one piece if you have a large printer.
Fidlock compatible bike base Made for 2 neodym magnets with 10mm diameter and at least 2mm height Fixate the magnets with glue or epoxy. Pay attention to the direction of the magnets when installing! I recommend to print this with 100%…
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for PETGSource material: PET
Goal of the design: I got tired that my Arduino prototypes were so difficult to move, and that the jumpers were always being ripped out due to the board being separate from the breadboard. The goals for this design were; Easy attachment…
Easy tool for measuring TCP and Base on robots. Positioning with magnets. Thanks to strong magnets and lightweight plastic, there is no displacement when touched. Each attachment has a screwdriver hole in it, in case the thread in the…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
A simple base for who like me didn't know where to put an entire sword but still wanted to print this beautiful model. The fit of the parts should be as tight as the other sword pieces since I directly used the next sword segment to get…
Print approx. €9.46–€11.56 excl. taxPreliminary estimate for one variant
If you want a completely SILENT printer, print this and see bellow for TPU LCD panel support. Vibration dampers. Reduce noise and vibrations. This is the most functional design I could find or imagine based on existing models I could…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
Assembling: Put the bottom grid into the skimmer basket tube. There are 4 latches at the end of the tube. Material: PETG Nozzle: 0.4 Layers: 0.3 mm Infill: 50 % Skimmer basket tube: Skirt height: 20 layers Loops: 2 Brim: inside and…
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for PETGSource material: PET
Extended baseplate for Makita Router, it give you more stability. If you need any other size, just send request I will make it. Note: real photos are without rotation mark because I added this later. Print instructions PLA Infill 25% Look…
Print approx. €2.54–€3.11 excl. taxPreliminary estimate for one variant
Hello ! Wellcome to my little office with Prusa MINI +. I made industrial lamp with concrete base, retro bulb and soft pad made of recycled rubber. O.10 DETAIL Prusament PLA No supports 15% We will need: Concrete (fine concrete with small…
Print approx. €5.04–€6.15 excl. taxPreliminary estimate for one variant
To replace the stock Prusa base - allows reuse of the parts already printed for the https://www.prusaprinters.org/prints/10370-gravity-spoolholder-for-mmu2s Also included is an MMU2 version, HEX bottom (Same HEX pattern as sides) added…
Print approx. €2.96–€3.62 excl. taxPreliminary estimate for one variant
Minnesota Timberwolves NBA Basketball Team Logo
Print approx. €16.89–€20.65 excl. taxPreliminary estimate for one variant
Płyta bazowa LEGO w różnych rozmiarach jest gładka od spodu, dzięki czemu można ją przykleić do dowolnej powierzchni. Rozmiary płyty bazowej: 12x8 6x3 6x4 5x4 5x3 Oczywiście na płytce można zbudować dowolna rzecz. Wypusty zostały tak…
Print approx. €3.50–€4.28 excl. taxPreliminary estimate for one variant
Cardbox with dividers. no supports needed.
Print approx. €10.86–€13.27 excl. taxPreliminary estimate for one variant
This Stackable Laundry Basket Storage Box combines practicality with a playful laundry basket design! Key Features: Compact Size: Dimensions of 84x58 mm and 40 mm in height, perfect for small items. Stackable Design: Easily stack multiple…
Print approx. €1.38–€1.68 excl. taxPreliminary estimate for one variant
Simple bread proofing basket. Can't buy them anywhere because everyone is an artisan baker now, so I designed this. About the right size for 750g of dough. Designed in Onshape, model is here:…
Print approx. €11.08–€13.54 excl. taxPreliminary estimate for PETGSource material: PET
Storage container with swiveling drawers made out of empty Prusament spool. Thanks to @Yell for the Prusament Spool CAD model that helped with the creation of this model. You'll need 2 of each drawer type and 2 pins. You may need to look…
Print approx. €17.36–€21.22 excl. taxPreliminary estimate for one variant
A basic model for quick and repeated printing. Key attribute is the blade which has been blunted so kids can play safely. Printed on a MK3S+ at 0.2mm quality, PLA, no supports, and 15% infill.
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
3mf and gcode: My designed hexagon-base for settlers 2.0, with a break at 4.8mm (7) - to insert magnets during the print. stl-file will be on thingyverse: https://www.thingiverse.com/thing:3864468 Original idea from "Dakanzla":…
Print approx. €3.20–€3.91 excl. taxPreliminary estimate for one variant
Simple base for the portafilter to have a fixed position for tamping your coffee. It fits specially for the Sage / Breville barista express portafilter with a basket size of 56 mm. The top opening has a size of 61.3 mm.
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for one variant
Simple model of Easter basket. Printed from orange Rosa3d Pet-g. Material: Pet-g recommended ( PLA, ASA, ABS etc.) Layer high: 0,2mm ( 0,3mm possible to print) Support needed
Print approx. €17.77–€21.72 excl. taxPreliminary estimate for PETGSource material: PET
Box for Dummy 13, which can be used as gift box or box to store Dummy 13 unfolded or assembled. It can be also used as stand base or pedestal for assembled Dummy 13. Box have space for Dummy 13 itself and also for various accessories. To…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for PETGSource material: PET
We all want to do it! Ball up that piece of paper and take the shot! This is not simply throwing away the trash. No! This is the moment, the game is here, now! You shoot! Buzzer rings! The trash ball sores through the air. Time slows down…
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for PETGSource material: PET
Not much to say. Open top boxes with holes on them. Put things in them. You can put them on top of each other. Big box, big holes. Small box small holes. Ohh, there is a tray to put on the bottom in case the things you put in the boxes…
Print approx. €7.41–€9.06 excl. taxPreliminary estimate for PETGSource material: PET
Small woven basket, diameter 80 mm, hight 120 mm. Printed with Prusament PLA without any supports. PrusaSlicer 2.7.0 with Input Shaper.
Print approx. €5.75–€7.02 excl. taxPreliminary estimate for one variant
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal , @paulorfo (Venmo), $paulorfo (Cash App) -------------------------------------------- UPDATE | 11/16/2024: "Lansky_Large Base.stl" file uploaded…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
I thought the basket made by kunaaprinting was a nice basket but it is 12 inches long. This a little long for a Prusa. I printed it out on a CR30 belt printer and liked it but thought it could be a little shorter also. I brought it into…
Print approx. €5.57–€6.80 excl. taxPreliminary estimate for PETGSource material: PET
Took the base of the Nutella Candy Dispenser from Sui77 and removed the threads, I then added new threads and raised them up to fit a regular mouth mason jar. I have also added a wide mouth version. 0.2mm layer height, 20%infill, 2 walls.…
Print approx. €11.25–€13.75 excl. taxPreliminary estimate for PETGSource material: PET
Support only on the top rim, other no needed. Check 3MF file.
Print approx. €10.26–€12.54 excl. taxPreliminary estimate for one variant
The small parts organizer “Basic33” / VarioPlus Hobby 33 (old version with flat frontface) by Allit is often sold via supermarkets like Lidl as a Parkside product and Aldi and Hofer (Austria) as a Workzone product. They come with a very…
Print approx. €2.38–€2.91 excl. taxPreliminary estimate for one variant
At home, we're making our own tablets for toilet cleaning (environmentally friendly and cheaper). So I designed and 3D printed a basket to put it inside the toilet bowl. Design inspired by another model available here →…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
WaveShare makes a really attractive and very compact base board for the Raspberry Pi Compute Module 4 (CM4). Unfortunately, when I bought mine, there were no suitable enclosures available. This model addresses that shortcoming. This is a…
Print approx. €2.19–€2.67 excl. taxPreliminary estimate for PETGSource material: PET
Golden State Warriors 3D Basketball Logo
Print approx. €24.50–€29.95 excl. taxPreliminary estimate for one variant
Legos are very high precision pieces which was a challenge to replicate. To get good results make sure your printer is perfectly square as any small deviation will cause the plate to warp when using with real legos. This model may take a…
Print approx. €3.02–€3.69 excl. taxPreliminary estimate for one variant
Freddy FazBear FNAF - Based Joins Dummy 13
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Lionel Messi Bas Relief. Testing out Flux + TiledZoeDepth. Flux is nice because there is a lot less need for multiple batches to achieve desired results while using Forge (Stable Diffusion) As long as your description is tight you are…
Print approx. €6.01–€7.35 excl. taxPreliminary estimate for one variant
Garmin Edge quarter-turn mount base for SoRider handlebar mount, two-screw installation. Print Settings: Layer Height: 0.15mm Infill: 15% Perimeters: 4 Material: Prusament PETG Black Supports: for supports enforces only with automatic…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
Flat base for Festool Systainer 3 toolbox. Print 4 pieces and glue together or just in one piece if you have a large printer.
A couple of mounts for the Arduino Uno or similar models. I got the initial idea from here and designed the stuff in OnShape. You can put the Uno straight on the mount and use it like that, or fasten it onto somewhere with the mount. Also…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
The original baskets for my Black Diamond ski poles did not fit. These are replacements in two different sizes. They swivel 24° perpendicular to the pole axis to allow for a better experience when walking uphill. They are fixed in place…
Print approx. €2.57–€3.14 excl. taxPreliminary estimate for PETGSource material: PET
This one was tricky! I wanted to combine the upcoming holiday with the vase competition and add my twist! This spiral vase includes an integrated handle that can be easily detached to make the vase into something more. Pop the handle into…
Print approx. €2.63–€3.22 excl. taxPreliminary estimate for one variant
Saint Sebastian Saint Sebastian was an early Christian martyr who lived in the 3rd century AD. While the exact details of his life are debated, the traditional account holds that he was born in Gaul (modern-day France) and became a…
Saint Scholastica : Bas-Relief : two versions. The version on the left seems to need some widening while the version on the right could use some tightening up. I was experimenting with some detail manipulation and noticed the distortion…
Print approx. €10.77–€13.16 excl. taxPreliminary estimate for one variant
Car phone holder base for the CD slot for my purchased holder, the base of which does not fit the Skoda Octavia II. It is compatible with iOttie and Swissten holder (sphere diameter 17 mm). Use M3x18 screw and hex nut to connect body and…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for PETGSource material: PET
Replica of the baseplate of the Makita trimmer base 196613-4. As far as I can tell, it is not possible to buy the base plate as a separate replacement part, you have to buy the whole unit: Makita (German):…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
At 100%, the basket is large enough to hold 2 USDA large chicken eggs. If you have a large printer, it should scale up well. This is designed to be decorative. Don't print it with PLA, fill it with candy, and be surprised when the handle…
Print approx. €18.51–€22.62 excl. taxPreliminary estimate for one variant
30/12/2023 - Added new curved version. 07/06/2025 - Added Stl+Step files for left handed version.
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Be careful, you need to change the needles size. Update: the needles size: In green: 22mm (4x) In yellow: 27mm (1x) In orange: 32mm (4x) In red: 37mm (1x)
Print approx. €3.41–€4.17 excl. taxPreliminary estimate for one variant
Designed to be a sturdy tray to hold any 32mm round base models. 4 finger holes in the middle to help pick up the tray and to lessen total weight.
Inspired by Djngnear's tabletop tray, I remixed mikeev's mount for the Sunlu S2 to entirely remove the screw holes (with no internal bits left over) and cut it down to fit on a Prusa Mini/+ bed. I also cut the power cord hole to be open…
Print approx. €6.54–€7.99 excl. taxPreliminary estimate for one variant
Remix from https://www.thingiverse.com/thing:4861771 , added a CLEANTEC connector. Knob is from https://www.thingiverse.com/thing:3713327
Print approx. €11.11–€13.58 excl. taxPreliminary estimate for PETGSource material: PET
This is an adapter based on the official EVVA/CES Adapter (green (1) adapter). I've only kept the holes needed for our door to improve structural integrity. However, this can be easily custimized in the OpenScad Code ( splintDiameter ).…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Dovetail Gridfinity Base - Multiple Dovetail Options
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
Thinned the walls and made it flat on the bottom to make it easier to print and use less filament.
Sargon II was a prominent king of the Neo-Assyrian Empire who reigned from 722 to 705 BC. He is considered one of Assyria's most successful rulers, known for his military prowess, administrative reforms, and ambitious building projects.…
Print approx. €7.71–€9.43 excl. taxPreliminary estimate for one variant
This is my design of a fully functional, print-in-place hinge – especially created for the FFF process using PETG or ASA material. It is a medium-strength design with the series number 200. Two 80mm length hinges of this design will…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for PETGSource material: PET
Designed this so my 2-year-old could shoot hoops while in his rear-facing car seat. Mounts through the headrest posts of our 2019 Toyota RAV4. I assume this is likely compatible with other Toyota vehicles, as well as a good deal of other…
Print approx. €3.43–€4.20 excl. taxPreliminary estimate for one variant
Basmalah / Besmele Stencil - Islamic Calligraphy Art Suitable for artistic calligraphy and artistic spray work. I designed it for my mother, who is a wood burning artist. I look forward to your support (download) -- Dimensions -- Length :…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Simple Bassreflex tube, you can easily adjust the desired dimensions directly in the slicer
Özel bir hat sanatı yazısı ile bismillahirrahmanirrahim (Rahman ve Rahim olan Allah'ın adıyla başlarım) yazısını sizin için stencil haline getirdim. İnşallah işinize yarar. Yorumlarınıza göre geliştirebilirim
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
Hi there! This is my own take on a 3-model squad base for 32mm diameter base miniatures. I use these for my older style Blood Angels space marines for Warhammer 40k, but these would work for just about any game using minis on the same…
I created and released a few sets of #NoWalls Dungeon Tiles that use the OpenLock form factor. During development I wanted to try out the 5mm magnetic balls for easy connections without the OpenLock clips. I came up with a small…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Dragon: Perimeter 2 Infill: No Supports: yes wall base: Perimeter 3 Infill: 15%
Print approx. €1.81–€2.22 excl. taxPreliminary estimate for one variant
Stone base | Brick Pedestal | Miniature stand | Display base | Miniature accessory Customize the dimensions for your miniatures. I look forward to seeing your creative setups and photos featuring this base. Have a happy printing time 💛
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
This design is based on the original product (reference 050083-10 ) and is specifically made to fit the 500 series Mitutoyo calipers. It is also compatible with calipers that have a 16x3.5mm blade. The model is designed to fit neatly…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
This model is a replacement I made for the 2.4ghz mouse dongle shroud of my Razer Basilisk X Hyperspeed that snapped in half. I tore apart the mangled original shroud, put the PCB into the slot of the print, and then put the metal USB…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
