Search results: buddy3d

Sort order

158 models

P
PrintablesDvG3DAtelier

Prusa Core One Buddy3D Camera Angle Mod – Better View, No Collision, Round Magnet Mount

I remixed this model because I had a collision with the connection of two frame parts on my Core One. To fix this, I thickened the contact surfaces slightly and moved the camera a bit further inward. This now allows for a secure fit,…

Downloads
1,376
Likes
415
Rating
4.99
P
PrintablesHeikit

Remix of Buddy3D Buddy 3D Camera Mount Holder Prusa MK4/MK4s and other Aluminum Alu Profiles

Remix of Buddy3D Buddy 3D Camera Mount Prusa MK4/MK4s and other Aluminum Alu Profiles

Downloads
241
Likes
45
Rating
4.67
P
PrintablesStefan Skotty

Buddy3D Camera Mount Befestigung Deckel

Ein Ersatz-Deckel für die Befestigung der Buddy3D Camera.

Downloads
48
Likes
7
Rating
5
P
PrintablesYannick Swinnen

Prusa XL Buddy3DCam Sidemount

This Buddycam mount can just be clicked over the left or right top extrusion endings and has 4 screwholes for mounting the twist locking disk onto it. Apparently also compatible with Google Nest 2nd Gen indoor camera's, they have the same…

Downloads
36
Likes
6
Rating
0
P
Printablessjugge

Tilt adjustable HSW mount for Buddy3D camera

HSW mount for the Buddy3D camera with tool-less tilt adjustment. Bill of materials Printed parts All required printed parts are available as single STL for each variant. HSW-buddy-cam--heatset+M3.stl : uses 2x heat-set inserts + 2x M3…

Downloads
10
Likes
4
Rating
5
P
PrintablesJason

Core One Buddy3D Camera lid remixed to improve view of printbed

Version 2 - moar magnets: After feedback about the camera not sticking - probably due to weaker 6mm x 20mm x 2mm magnets than the ones I had available, the model was revised with the following changes: The 6mm x 20mm magnet is…

Downloads
3,238
Likes
492
Rating
4.78
P
PrintablesPrusa Research

XL Camera Mount | Buddy3D

This Buddy3D Camera mount is compatible with XL and XL Enclosure. How to guide: https://help.prusa3d.com/guide/how-to-set-up-a-buddy-cam_385017 Recommended settings: Default 0,2mm layer height profile, PETG filament, supports are not…

Downloads
3,206
Likes
303
Rating
4.63
P
PrintablesPrusa Research

MK Family & MINI Camera Mount | Buddy3D

This Buddy3D Camera mount is compatible with MK Family and MINI standalone printers including MK Family and MINI in the enclosure. Please note that magnets for using the camera mount in MK & MINI enclosure are recommended. Magnets prevent…

Downloads
2,175
Likes
342
Rating
4.85
P
PrintablesDET-Man

Buddy3D Antenna GUARD (for CORE One, +, L, INDX)

The original Buddy3D camera for the 🥰 Prusa CORE One comes with the Wi-Fi antenna freely hanging outside the housing 🫣. This not only makes it look unfinished but also leaves the antenna vulnerable to damage. The flexible part of the…

Downloads
1,121
Likes
128
Rating
5
P
PrintablesPrusa Research

Buddy3D camera for CORE One printed parts

Description Print instructions Download the latest PrusaSlicer and use the following settings**: Print settings: 0.20mm STRUCTUAL Filament: PCCF (tested on Prusament) - please remember that when printing from PCCF, you need a hardened…

Downloads
836
Likes
264
Rating
4.86
P
Printablesjamaikai

Buddy3d profile mount MK4S

The holder for the Buddy3D camera is designed specifically for the MK4S 3D printer but can also be mounted on other printers with compatible aluminum profiles. It simply twists into the profile and features a "Snap-to-Fit" mechanism for…

Downloads
563
Likes
100
Rating
4.93
P
Printablesdteng

Buddy3D Camera Mount for Original Prusa Enclosure

Some of the existing modifications/add-ons installed on my enclosure are not compatible with other Buddy3D camera mounts that have been posted for the Original Prusa Enclosure, so I decided to design a new one. This is a simple camera…

Downloads
538
Likes
128
Rating
4.97
P
Printablesvitaprint 3D

Buddy3D Mount Prusa XL / MK4S Enclosure Camera

This is a small Mount for the original Buddy3D Camera. You can use it on the Prusa XL Enclosure or on the Original Prusa MK Enclosure. You can use the lock plate from the cam (in the bottom of the cam) to screw it on the mount. My screws…

Downloads
463
Likes
69
Rating
5
P
PrintablesFyrby Additive

Prusa XL Enclosure Mount For Buddy3D Camera

🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a simple mount for the Buddy3D camera to fit the official Prusa XL enclosure. Rather than hang this upside down using the mount point in the bottom, which would be a bit weak to 3D print, I made this mount instead…

Downloads
396
Likes
85
Rating
4.89
P
PrintablesHeikit

Buddy3D Buddy 3D Camera Mount Holder Prusa MK4/MK4s and other Aluminum Alu Profiles

Can be fitted without dismantling the Prusa (see photos for various dovetail guides). The V2 version requires no pliers. Important: Layer height for printing 0.1 mm Use 2 M4x20 or M4x12 Screws to mount Kann ohne Demontage des Prusa…

Downloads
374
Likes
58
Rating
4.25

Simple Buddy3D Camera Mount

Simple Buddy3D Camera frame mount bracket for the Prusa I3 printers. Fits the standard aluminum frame without any tools or fasteners. It utilizes the standard mounting plate you get with your Buddy3d camera. You can freely move the…

Downloads
346
Likes
50
Rating
4.64
P
PrintablesStudio 42

Buddy3D Camera Mount Adapter for Prusa Official Enclosure

This adapter is designed to seamlessly integrate your Buddy3D camera into the official Prusa enclosure. By replacing the original camera support, this printed adapter provides a secure and stable mounting point, keeping your camera…

Downloads
343
Likes
59
Rating
5
P
Printablesjeffrey892

Camera Mount-Prusa MK3, MK4, and MK4S Buddy3D Mount

I combined a couple files to fit the Buddy 3D camera on the MK series printers.

Downloads
341
Likes
60
Rating
4.75
P
PrintablesMaxPi

Prusa Buddy3D Cam Ball Mount — Adjustable Angle Fix for Prusa Core one/+/L

A simple ball-mount adapter that fixes and allows fine-tuning of the Buddy3D camera viewing angle inside the Prusa Core ONE L enclosure. The problem: The stock Buddy3D Cam position on the Core ONE L often results in a poor viewing angle —…

Downloads
333
Likes
155
Rating
5
P
PrintablesCamRodandChief

Buddy3D Prusa XL Enclosure Mount

Here is a simple design for a Buddy 3D Camera mount for Prusa XL Enclosure . I printed it with 0.28 draft and organic supports on the build plate only. To attach it you will need: 2 @ M3 nuts 2 @ M3 x10mm screws

Downloads
327
Likes
50
Rating
4.78
P
Printablesthebbb

Buddy3D Mount

No supports. Use small woodscrews to secure the Buddy3D base to the mount (don't overtighten, it is only plastic).

Downloads
210
Likes
27
Rating
4
P
PrintablesDave G.

Buddy3D Camera Angle Mod for a Better View

The official Prusa Buddy3D Camera for the CORE One/+ is an awesome printer add-on that works great and integrates well into Prusa Connect, but the angle that it mounts onto the frame doesn't allow you to see a large part of the back-right…

Downloads
195
Likes
124
Rating
5
P
PrintablesSurfalex2000

Prusa XL Series: Buddy3D Prusa XL Mount

To mount the bracket on the Aluminium extrusion, you will need a m4 Screw and Nut for the 3030 Extrusion.

Downloads
193
Likes
34
Rating
5

Core ONE Spare Phone Camera Holder for those who don't have buddy3D camera. (See the video)

Timelapse is recorded using this holder AnkleKris is back with a new creation! This time, I present to you... epic drum roll ... the Core ONE Phone Webcam/Timelapse External Holder ! It’s a quick and practical 3D print — just 9 minutes…

Downloads
190
Likes
50
Rating
4.57
P
PrintablesPareidolia

CornerBuddy XL Enclosure Mount for Buddy3D Camera

Small ( < 20g! ) mount that keeps the light source behind and the camera out of the way of the toolheads. Assembled with one M4 heat set insert. Secure in corner by first pushing through the two side pegs and then securing the heat set…

Downloads
186
Likes
39
Rating
4.67
P
Printableschipmen

Holder Prusa Buddy3D camera

One type is identical to the original if you damage the original. Type M3 is directly for screwing M3 screws into plastic. The thread length is extended to 4mm. For heat-inserted M3 and M4 nuts, the depth is extended to 6mm.

Downloads
167
Likes
26
Rating
5
P
PrintablesVincent

CORE One Buddy3D Camera Cable Holder

Very simple print to keep the Buddy3D camera cable tucked up in the corner. Print in PETG (or something with higher temperature tolerance) and press in a 10x3mm magnet. No need to print with supports or in a different orientation. The…

Downloads
158
Likes
42
Rating
5
P
PrintablesTheWortLord

Buddy3D Camera Holder/Mount

I wanted a simple mount for my Buddy3D camera that keeps it “attached” to my printer so I made this. It clips into the aluminum extrusion and raises the camera up enough to see the first layers well. You can use a t-nut to secure this but…

Downloads
142
Likes
24
Rating
4.83
P
PrintablesAshyr

XL Camera Mount | Buddy3D for XL Enclosure - Angle Change to capture entire bed

I, originally, printed the XL Camera Mount | Buddy3D for the XL Enclosure and noticed I could not capture the entire print bed as the head of the Buddy3D camera could not tilt any higher. I duplicated the mounting base and rotated it to…

Downloads
141
Likes
15
Rating
4
P
PrintablesJupera

XL Camera Mount | Buddy3D CORE One

Attach the new, compact, Buddy3D Core One camera to your Prusa XL using the official Prusa XL Camera Mount: https://www.printables.com/model/1105925-xl-camera-mount-buddy3d Should work for the XL_enclosure mount also. All pieces should be…

Downloads
141
Likes
28
Rating
5
P
Printablesplaetzchen

Buddy3D Camera Enclosure Mount

This is a terrible way to mount your new Buddy3D Camera in your Original Prusa Enclosure. It's not very elegant, the model lacks a clean geometry and it also needs supports. BUT it works, it prints in 25 minutes and it makes your camera…

Downloads
124
Likes
22
Rating
0
P

Prusa XL Cam using the Buddy3D Camera from the CORE One

Updated Nov 7 2025 - Rev 1_2 - Fixed letters to make them easier to assign color/filaments. Updated Nov 6 2025 - Rev 1_1 - Added additional structure to arm extension for better function. Introducing the Prusa XL Cam mount using the…

Downloads
110
Likes
38
Rating
5
P
Printablesdym801

Prusa Buddy3D Camera Mount

SupportBuddyCam_Crochet in PETG SupportBuddyCam_Pied in PLA Glue it together

Downloads
108
Likes
14
Rating
5
P
PrintablesSurfalex2000

Prusa XL Series: Buddy3D Camera (Scan+Fusion Model)

First (Bad) Scan without Contrast Spray from the Buddycam for People that want to check the Size. Update 02.12.2024: Uploaded a Accurate 3d Model with mounting fixture

Downloads
107
Likes
25
Rating
5
P

"Buddy3D Camera for Prusa CORE One" Adapter to MK4s

"Buddy3D Camera for Prusa CORE One" adapter to MK4s Perfect camera angle. I am suprised no one made this adapter before. NEEDED: 3x Zip Ties M3x18 Screw for Mounting Hex tool to remove the original backplate from the camera Assembly:…

Downloads
106
Likes
26
Rating
4.83
P
Printables3D Druck Felix

Buddy3D camera mount for Prusa XL Enclosure

Design features: - easy to print: no support structures and very few filament needed - fits perfectly at the buddy3D camera, not too tight, not too loose I used threaded inserts and M3x10 screws. I added the FreeCAD file of my design in…

Downloads
104
Likes
31
Rating
5
P
PrintablesFunkenjaeger

XL Sumo enclosure corner mount for CORE One Buddy3D camera

The modified Buddy3D camera that Prusa offers for the CORE One is a compact corner-mounted design well suited to a rectangular enclosure, but its geometry is very specific to the CORE One enclosure and it lacks any additional…

Downloads
103
Likes
14
Rating
5

Buddy3D Cam Ball Joint Mount with 10x3mm magnets

Remix of the Buddy3D Cam Ball Joint Mount with magnets with very minor changes to use circular magnets that are 10x3mm, rather than the rectangular magnets of the original model.

Downloads
92
Likes
24
Rating
0
P
PrintablesUSDC

PRUSA XL / Buddy3D Camera Mount USDC

This Cameramount is an easy to fix solution for the current (2025) Buddy3D Camera, sold via Prusa Online Shop. The mount is for to use with the mounting plate that comes with the camera. It is variable in the fixing angle so the user is…

Downloads
92
Likes
18
Rating
5
P
PrintablesSurfalex2000

Prusa XL Series: Buddy3D Camera SLIM Mod

I didnt like the bulky camera, and didnt need the Camera Controls, so i removed the motors. Everything else still works. Speaker, mic, Night vision and USB-C . No Soldering requiered. For the Slim Cover, you can use the long screws that…

Downloads
90
Likes
32
Rating
5
P
PrintablesKarsten

Buddy3D Cameramount XL

Holder After printing remove the support, melt in the threaded inserts M3 (2 pcs.) and press in the magnets Ø6x3 (8 pcs.). The height stop is bent 90° and snaps into place (see picture) Camera mount Remove the support, drill out the holes…

Downloads
87
Likes
30
Rating
4.5
P
PrintablesKachidoki

Buddy3D camera cutout to avoid CORE One L vent collision

There is a collision between the vent grille of the Prusa CORE One L and the Buddy3D camera. This is weird as the camera is shipped with the printer, it is not an accessory so it should have been broadly tested... Maybe a tolerance issue.…

Downloads
86
Likes
39
Rating
5
P
PrintablesHAL_9000

Buddy3d Mount for XL Enclosure

Buddy3d Mount for XL Enclosure with screws

Downloads
84
Likes
5
Rating
5
P
Printablesrydz

Core One Buddy3D Camera lid remixed to improve view of printbed - Remix

I added additional support for 10x6x2mm magnets in the legs. Now you can use either rectangular or round magnets. This is a modified design - @Jason_50683 , @DvG3DAtelier

Downloads
83
Likes
14
Rating
5
P
Printables29e1e4

3030 Extrusion holder for MK4S for Buddy3D Camera, Gridfinity and more

A versatile 3030 extrusion holder: just print out as many elements as you need (normal or short length) and chain them together. Tolerances are 0,1 mm, depending on the printer and the orientation of the print you may want to glue them…

Downloads
80
Likes
25
Rating
5
P
PrintablesLexikon

Magnetic holder for camera buddy3d

(EN) You need to print with support. You will need 6x magnets ⌀ 8mm x 3mm. Press the magnets with force until they stop. (be careful, the magnets will stick out a little) If the magnets don't hold properly, you can use glue. I used PET-G…

Downloads
76
Likes
14
Rating
2.5
P
Printablesjeffrey892

Buddy3D Shorter Camera Mount

This is a shorter, sturdier mount for the Buddy3D camera. I also changed the angle so it points to the print bed.

Downloads
67
Likes
9
Rating
2
P
Printablespcgeekesq

Magnetic Mount Mod, adapt Buddy3D CoreOne Camera to Prusa XL enclosure

Printed using the same materials and settings as Prusa used in the original: PCCF, .20 layer height, 15% grip infill. I mounted it top-front-center of the enclosure, as shown in the pictures. With four magnets total, the grip is pretty…

Downloads
66
Likes
18
Rating
0
P
PrintablesPeter Main

Mount for the Prusa Buddy3D Camera

This is a simple camera mount for the Prusa Buddy3D camera. It does fit inside the enXLosure enclosure (I highly recommend it if you're thinking of adding an enclosure). I don't know if it will fit inside the Original Prusa XL Enclosure.…

Downloads
65
Likes
11
Rating
5
P
PrintablesMarius

Holder for Buddy3D Camera, Screw on Wall

I needed to mount the Buddy3D Camera to a wall in my enclosure, so i designed a screw-on holder. There are 3 different types: the lugs are in different angles. Pick the one you need. Unfortunately it has to be printed with supports under…

Downloads
63
Likes
7
Rating
5

My Prusa Buddy3D Cam Final Solution for MK4/MK4S

In order to fit my modified Prusa Buddy3d Cam to my Prusa MK4S, I designed remixed a few parts . My creations are the 3 downloadable STL files here, arm/clamp/sleeve . Printed on my Prusa MK4S in PETG with 0.4mm nozzle / 0.15mm layer…

Downloads
63
Likes
30
Rating
5
P
PrintablesPeter Paul

XL Buddy3D Mount for EnXLosure

Remixed the original by Prusa to fit on the side of the EnXLosure by Voxel3D

Downloads
62
Likes
8
Rating
5
P
PrintablesPrintyet

Buddy3D Kamerahalter für Prusa CORE One – Verbesserter Deckel mit Schraubmontage

Buddy3D Kamerahalter für Prusa CORE One – Verbesserter Deckel mit Schraubmontage Überblick Dieser Kamerahalter ist eine verbesserte Lösung für die Buddy3D Kamera des Prusa CORE One 3D-Druckers. Im Gegensatz zur Standard-Magnetmontage…

Downloads
62
Likes
20
Rating
5
P
PrintablesNCS

Buddy3D Camera Angle Simple Fix - No New Parts

This remix maintains the fix for the collision between the Buddy3D camera and the vent grille while also adjusting the camera viewing angle to better capture the printing surface. This is a very simple fix that results in better operation…

Downloads
62
Likes
23
Rating
5
P
Printablesdingo

Buddy3d Camera Taller Mounting Plate

I didn't have countersunk screws to sit flush inside the mouting plate, so I made this taller version to have room for screw heads when attached to camera. ~9 minute print in PLA, 0.20 layer height. “Wings” need supports.

Downloads
59
Likes
6
Rating
0
P
PrintablesMartin Lexa

Buddy3D Cam Ball Joint Mount with magnets

Yes, you can just put the Buddy Cam on the frame as it is, but then you won't see the whole bed. This mount gives the camera a better angle, plus it makes is attached more securely with magnets. The magnets are supposed to be the same as…

Downloads
58
Likes
11
Rating
5
P
PrintablesFoppemoa

Buddy3D Camera (For Core One) Privacy Cover

The wide angle lens on the Buddy3D Camera for Core One can see a bit outside of the printer. Especially after mounting the angle modification by @Jason . So I made these little covers that just pushes onto the lens of the camera, and…

Downloads
53
Likes
10
Rating
5
P
PrintablesKomár JN

Filament holder for - Aurapol , Spectrum , Buddy3D , C-TECH

Filament holder for - Aurapol, Spectrum, Buddy3D, C-TECH. Two versions, one is more flexible/moving, the other holds more in position. For 1.75mm filaments. The hole is rounded so the filament doesn't pull out spontaneously.

Downloads
52
Likes
8
Rating
5
P
Printablesbykim

MK Enclosure Buddy3D Camera Mount - more magnets

Ability to add 4 more 20x6x2mm magnets. The 3mf is provided so you can tweak it with your own negative volume as you please

Downloads
51
Likes
6
Rating
5
P
PrintablesTCMars

Buddy3D Mount for Sumo XL Enclosure

This is a remix of 3DSourcerer's SUMO/DELACK Enclosure corner piece to hold a Buddy3d camera. You can mount it to the top or middle corner. The ‘foot’ that extends below the corner adds rigidity and support to the camera, particularly if…

Downloads
49
Likes
8
Rating
4.67
P
PrintablesRainyDayHiker

Prusa Left Bin with Buddy3D Camera Mount

I had my camera mounted on my enclosure in the upper-left corner but found the height of the image to be less than desirable. Since I was also in the process of making sure the enclosure could be easily removed without significant changes…

Downloads
49
Likes
7
Rating
5
P
Printablesxtommy

Prusa Core One Buddy3D Camera Angle Mod – 5mm and 6mm magnets

If you don't have 10mm (source model) or 8mm (this remix: https://www.printables.com/model/1518691-camera-lid-remix-v3-with-round-8mm-magnets ) magnets at home, but you do have 5mm, or 6mm magnets, then this remix is for you! See the…

Downloads
48
Likes
6
Rating
5
P
Printables3D Sourcerer

SUMO/DELACK Prusa Buddy3D Camera Mount

CLICK HERE FOR ASSEMBLY INSTRUCTIONS

Downloads
47
Likes
4
Rating
0
P
Printablesphiliip11

Buddy3D Cam Upside Down Holder

Print instructions Print in PETG with 2 walls and 10% gyroid infill. Or more if you want. Building instructions Attach the mount of the camera with two 4x16 wood screws to the bottom of this holder. Then, attach it to the wall or…

Downloads
46
Likes
8
Rating
0
P
PrintablesGrum

Buddy3D Prusa XL Enclosure Mount - with tighter fit

This is almost identical to @CamRodandChief 's awesome original, except that the camera is held more firmly in place. I printed it on a Prusa XL with Prusament PETG using the 0.15mm STRUCTURAL profile and organic supports. Same as the…

Downloads
46
Likes
5
Rating
5
P
PrintablesThaix03

Magnetic Buddy3D – Core One Camera Cover Mount

This is my simple solution for storing the camera cover that comes with the Buddy 3D Camera for the Prusa Core One. The holder is magnetically attached to the enclosure using a 3×6 mm round magnet . To insert the magnet, simply pause the…

Downloads
44
Likes
11
Rating
5
P
PrintablesOčko

Buddy3D_Camera_Prusa_Ring_v2

Print Prusa Petg Orange 0,1mm Fast detail !! The ring is fixed with two drops of super glue. There is a small rim inside to prevent the glue from leaking out. Use a small amount and proceed with caution, as you may damage the plexiglass…

Downloads
43
Likes
17
Rating
5
P
Printablesdteng

Buddy3D Camera Mount for 3DUpFitters Enclosure

This mount for the Buddy3D camera is specifically designed for enclosures made by 3DUpFitters, and replaces the original corner bracket in the upper-front-right corner of the enclosure. The design consists of two parts to allow the camera…

Downloads
43
Likes
10
Rating
0
P
PrintablesIron Crown

Buddy3D Camera mount for PrusaXL (square nuts)

I had square nuts on hand, but no heat set inserts, so a quick remix it is. This mounts onto the original XL enclosure, and the nuts slip right in. Print with a heat resistant material- ABS/ ASA are preferred, but PETG will work.

Downloads
43
Likes
2
Rating
0
P
PrintablesOčko

Buddy3D_Camera_Prusa_Ring_v1

simple printing, 4 minutes Print Prusa PetG Orange. 0,1 mm Fast detail prusaslicer default settings The ring holds tightly, I recommend fixing it with superglue.

Downloads
42
Likes
9
Rating
5
P
PrintablesOctopusRift

Mount Mod, adapt Buddy3D CoreOne Camera to Prusa XL enclosure

Modified @pcgeekesq_2498228 's mount to use M3x8mm screws and nuts since I didn't have any magnets on hand. This version will require you to drill 2 small holes on the metal brace that the enclosure door hinges attaches to. I also added…

Downloads
41
Likes
12
Rating
0
P
PrintablesAmethystZhou

Modified Buddy3D lid with improved camera angle

The stock Buddy3D camera for the CORE One has an angle that cuts off part of the print bed at z=0, but has a better view of the build area at higher z levels. I prefer the opposite, since most of the parts I print are not very tall. So I…

Downloads
40
Likes
15
Rating
0
P
PrintablesTimothy 3D

Buddy3d profile mount witch cable holder

REMIX holder for the buddy3D Camera. I added the text "original Buddy3d", in the mk4 style. I also added 3 cable holders, it is easier to hide the cable. I used the same print settings as described in the original. feel free to add a…

Downloads
35
Likes
7
Rating
0
P
PrintablesKrosta

CORE ONE - TAPO C200 changed like Buddy3D camera

I was using TAPO C200 for a long time with my previous MK4S printer, so I wanted to continue using it, but it was too big to fit into the CORE One, so I did some changes to it. I got rid of all motors, speaker and leave just the important…

Downloads
35
Likes
6
Rating
5
P
PrintablesAdrian

Buddy3D Holder for Prusa Enclosure

Adapter to mount the Buddy3D camera into the Prusa Enclosure.

Downloads
34
Likes
4
Rating
5
P
PrintablesGunnarH

Buddy3D CORE One wall mount

Unscreen two top screw on the camera and add the wall mount to it. Screw the wall mount to the wall,

Downloads
34
Likes
8
Rating
4.67
P
PrintablesTobias Stanzel

Magnetic and Parametric mount for prusa buddy3d webcam

This model can easily be adopted to the magnets you have at home! And makes use of the packaged mounting plate. You need 2 Screws m3 5mm 2 m3 heat inserts (voron style) 8 Magnets (I used 8 5x1.6mm magnets, thanks @Marie ;)) maybe some…

Downloads
33
Likes
10
Rating
0
P
PrintablesParkyCat

Angled Buddy3d Profile Mount MK4/S/other

I made this because the original was mostly looking above the build plate, but I wanted it to look more at the build plate. This is a remix of the other profile mount holder, twists into place on and holds onto the camera firmly. Insert…

Downloads
33
Likes
6
Rating
0
P
PrintablesLuís Lopes

Buddy3D Camera Wall Mount

I suggest installing with double-sided tape as I did. No holes, no drilling. To be used with the stock twist lock. Mirror the object using the slicer if it is better for you. The 3mf file has supports already configured.

Downloads
31
Likes
6
Rating
5
P
Printablesjoseraulrivera

Right facing Base Camera Buddy3D Mount for Prusa MK3/S/+, MK4/S

Buddy3D mount for Prusa MK3/S/+, MK4. Difference from the original is that the base faces right instead of left.

Downloads
31
Likes
6
Rating
5
P
PrintablesDiego Rosique

Buddy3D Enclosure Magnetic Mount for 20x10x5mm magnets

recommended magnet size : 20x10x5mm - Neodymium magnet (2 pcs) recommended screw: M3x10 (1 pc) Recommended settings: Default 0,2mm layer height profile, PETG filament, supports are not needed .

Downloads
30
Likes
6
Rating
5
P
PrintablesUnicorn3D

Prusa XL + Buddy3D [+ (optional) EnXlosure] = Finally a proper camera! V2.1

This model allows you to use the Buddy3D camera with the Prusa XL. It even works with the EnXlosure (but that is tight). This is a multi-remix of multiple models: The 3DBuddy redux model The Heatbed accessory mount The new version 2 has…

Downloads
30
Likes
10
Rating
0
P
PrintablesHoDCiB

Buddy3D bracket for within enclosure

For mounting the Buddy3D camera within the enclosure, a small bracket has been designed and tested.

Downloads
29
Likes
12
Rating
0
P
PrintablesDaniel Kouba

Buddy3D Camera Stand Obfuscator

Stand with 30deg FOV Obstruction 2 different sizes - 70mm is proper height for PRUSA MK4

Downloads
29
Likes
1
Rating
0
P
PrintablesBrandon

MK & MINI Camera Mount | Buddy3D - Remix

Redrew the originals with Solidworks and converted to STEP files so others can modify the originals easier. I needed to customize this mount to my needs, but as the originals were STL files, they were difficult to modify.

Downloads
29
Likes
1
Rating
0
P
Printablescorefile

Buddy3D Small Camera Case w/ GoPro Like Mount

The out of the box Prusa Buddy3D camera is just a bit to big and unwieldy, and I found the awesome project by @Holck , but I wanted to be able to reuse the articulating arms I was using with my old low resolution camera. So I remixed the…

Downloads
28
Likes
8
Rating
0
P
PrintablesAediel

Buddy3d magnet mount for Prusa XL

A remix of Karstens Buddy3d mount. Made it printable in one piece, and without the bending part. Also added a seperate mounting plate for the cam Needs magnets 6x3mm

Downloads
28
Likes
5
Rating
0
P
Printablesex-nerd

Low Profile Buddy3D Camera Mount for XL Enclosure

After designing my External Spool Holder for Prusa XL Enclosure , I realized that the official model for the Buddy3D Camera mount prevents me from using them. I also wanted to try to rotate the mount point slightly in order to get the…

Downloads
27
Likes
3
Rating
0
P
PrintablesGaston mehaudy

BUDDY3DMINI (Buddy3d Prusa Cam.) for PRUSA XL

I created a mini version for the camera housing from the parts list of my Buddy3d. Then I made two mounts: one long that reaches the center of the printer and the other short! The idea is to remove and install without screws. It only…

Downloads
26
Likes
11
Rating
0
P
PrintablesSn@il

Buddy3D spool Silica gel container

Dessicant (Silica gel) container for Buddy3D 1kg spool with outer and inner cylinders 52mm Extrernal diameter - 1mm round holes mesh 20g total weight Based on the one made for Prusament :

Downloads
26
Likes
7
Rating
0
P
PrintablesGaius Pupus

buddy3d camera position for prusa xl - @*#%!$

I'm a new owner of the prusa buddy3d cam, seems to me like the ugliest printer camera on planet. So after having some trouble to get it running, because my wifi password was too long for this peace of hardware, I did not found a nice…

Downloads
24
Likes
20
Rating
5
P
PrintablesWebdevel

External Buddy3D Camera Mount for EnXLosure

This is a camera mount for the Buddy3D camera. It mounts using two of the screws on the side of the EnXLosure. I printed it in PETG just to match the rest of my printer, but since it mounts to the outside I'm sure PLA would work fine.

Downloads
24
Likes
8
Rating
0
P
PrintablesMiraculix

Buddy3d Cam alternative Enclosure

I wanted an enclosure for my Buddy3d Cam that isn't as bulky and I don't need the tilt and pan funcionality (if it could be used anyway). This alternative Encolsure fits all componants exapt the Motors (even the microfone). To screw the…

Downloads
23
Likes
15
Rating
5
P
Printablesstefanhaager

Prusa XL Buddy3D Camera Mod

The Original Prusa Buddy3D Camera for the XL is rather large and the original camera mount by Prusa, mounts the camera in a bad spot. I wanted a more compact camera including the mount without disassembling the frontal part of the camera.…

Downloads
23
Likes
9
Rating
0
P
PrintablesJames Gurney

Prusa Core One Buddy3D Camera Angle Mod – Better View. Screw attachment

After the magnets failed to hold it properly and the camera fell, ruining a print, I decided I wanted a version of this which could not detach. It uses a single m3nS nut. You'll need to replace the m3x4 socket head screw which comes in…

Downloads
23
Likes
5
Rating
0
P
PrintablesT. J.

Buddy3D Magnetic Holder for Prusa MK4/S Enclosure

This is a camera holder for the Buddy3D to be mounted somewhere into your Prusa Enclosure (or other enclosures as well). Two magnets hold the mound on metallic parts (steel) or on glass with magnets also on the other side. You can mount…

Downloads
22
Likes
2
Rating
0

Clamp/Holder for "My Prusa Buddy3D Cam Final Solution" for Prusa MK4/MK4S

I modified the camera holder from @Holck_66633 to make his Prusa Buddy 3D Camera Redux Tiny Enclosure fit to my setup . My Redux Mod worked realy fine, and I am super happy with it . The screw (2 parts) I used to tighten my clamp came…

Downloads
21
Likes
14
Rating
0
P
PrintablesAediel

Buddy3d mounting plate slotted hole

An alternative mounting plate for the Buddy 3d camera. Enables more mounting positions.

Downloads
21
Likes
4
Rating
0
P
PrintablesBen

External Buddy3D Camera Mount for EnXLosure - Extra Holes

I liked the original except for the cable sticking out to the side. Routing it towards the back made more sense.

Downloads
21
Likes
3
Rating
5
P
PrintablesAdjuro

New Buddy3D camera case for 3D Upfitters and generic enclosures.

This model integrates three slots for 3×10×2 mm neodymium magnets, one in each corner, instead of the four magnets used in the original design. My goal was to use it in my 3D Upfitters enclosure with my recently upgraded MK3.5S. For that…

Downloads
21
Likes
5
Rating
0