Search results: cable

strong cable wall hook

a strong cable wall hook with material thrift. PETG 4 outer layer 30% infill

KLAMMA - Locking Cable Clip

Design Update The red clip shown on the right side of the second image is the KLIPPT Locking Cable Clip, which succeeds this earlier KLAMMA model. KLIPPT introduces a separate, versatile base plate that enables multiple mounting options,…

Simple Cable Organizer.

If you don't have a 3D-printer you can buy a set of 3 pcs printed here → Buy it here! The cable organizer is designed to fit all standard USB type cables with a diameter of 3-5mm. 2 slots for 2mm cable. 2 slots for 3mm cable. 2 slots for…

USB Cable Winder Stackable (+Knurled) Print in Place

Print in Place Stackable USB Cable Winder. Both smooth sided as well as knurled. Also include code for Color Change Print. Inspired by https://www.prusaprinters.org/prints/55627-cable-puck-print-in-place-cable-management Print…

Elegoo Neptune 4/4PRO Cable Chain

👇 Click the image below to explore my other 3D printable models. ✨ I prefer print with PETG filament. Z mount connection Z mount slepení Glue the two parts of the Z mount. The top edge must be lined up. Alternatively, you can sand it. To…

Cable Repair and Protect for iPhone and Samsung [lightning+usbc]

The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…

Cable organizer / cable clip

Simple but very usefull cable organizer for your cables. I was inspired by other clips in database but all clips are unsatisfying for me. For ex.: 1) Too big spaces and cables leave the clip. 2) Too long clip and unnecessary wasted…

The Handsome Cable Organizer – Cable Winder | Large & Mini

Wind. Store. Go. Keep your charging cables neatly wound in a reusable organizer with a textured outer grip. Choose Large or Mini, with an open-bridge Mini option for larger connectors. Easy winding: a broad spool plate gives your fingers…

"Cable puck" print-in-place cable management

Fully print-in-place cable management winder for usb/headphones etc.....

60° Heatbed Cable Cover

I designed this heatbed cable cover, because the ones available were designed to complex and too far off the original design. I needed an angled cable cover to reduce the length of the printer, so I can fit it inside an IKEA Platsa…

Cable Zip Tie Mount V2 ( Parametric )

Update: Extra hole for screw mounting ( d = 3 mm )

Cable Reel

This is a cable reel for storing your cable quickly and in a compact manner. Just center it on your cable,wind it up and you're ready to go. When you need to use your cable, just pull the cable from both ends until you have the length you…

Spooly cable safe - no bending cables

After a lot of prototyping now my final version. KEY FEATURES lightweight for traveling cables up to 6mm in original size /small one 4mm cable big radius to protect cable from breaking wheel design to see the cable snap in design for easy…

Hinged Cable Clip Divided

Hinged Cable Clip V2 Now Available ! Hinged Cable Clip Divided Is your absence of cable management scaring away your relatives and causing turmoil in your relationships with others? I can't help you with that… but this might… Behold the…

Elegoo Neptune 4/4PRO Cable Chain (New 90deg mount & Z mount to connect chain)

Tried to adjust the Z-mount and the 90 degree extruder so that another chain can be attached in X-direction. Unfortunately I only had the STL files available, so there might be small errors in the mesh. Didn't want to re-model the model…

Parametric stackable cable organizer / winder (one-way or two-way winding) with FreeCAD files

Unstable fusion360 source file It seems like a recent F360 update broke the model file. Since it is not the first time, I'm in the process of ditching Fusion360 from my workflow altogether. I'm learning FreeCAD and will attempt a redesign…

ENDER 3 V3 SE - Cable Holder Z-AXIS

Printed with wall line count at 2-3 and 20% infill. The original file has been uploaded. (FreeCAD)

Laptop Stand with Tray and Cable Holder

Update 16.12.23: STL files are now available English: A raised laptop stand with a honeycomb design. Additional I designed a fitting tray to hold the clutter of your desktop and a cable clamp that can bei fittet into the honeycombs where…

Cable Organizer

This a simple cable organizer that is designed to be screwed into place. Designed to be printed without support. ------------- UPDATE: In celebration of passing 100 downloads in one month I decided to give this model some love, so I have…

Cableclips - Bistable Compliant Mechanism

Changelog 2024-12-21 v1.1 fine tuned print settings; cc 0.17; ct 0.18 2022-12-02 v1.0 initial public release Neatly organising the world of cables has lost a lot of hassle with these reusable cableties: The bistable mechanism quickly…

Cable Organizer

Wire / cable organizer, easily install and remove cables. One version accommodates 2 sided adhesive tape for mounting on any surface. A second version with screw holes for fastening down a more secure mount. This model is easily scalable…

Cables raceway (duct)

A simple cable organizer when you really have to many cables to manage. The design is similar to what you can find in computer room (usually it is several meters in length and you cut it to size, but here we are limited to the print bed…

Gridfinity cable Organizer

For bigger cabels: https://www.printables.com/model/1203677-gridfinity-cable-organizer-big-cabel-2x3 this is inspired by: https://www.printables.com/model/274250-ikea-alex-cable-organizer but it's completely redrawn with different sizes…

Prusa MK3S (MK3S+) Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief

Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers. Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.…

New Improved - Skadis Cable Holder

Here's my wire and cable holder, specifically designed for the Skadis storage system. This innovative holder is designed to fit into your Skadis board, providing an elegant and practical solution for cable management. Its design is…

Honeycomb Wall Compliant Mechanism Clip Mount - cable, pen, etc HSW

Changelog Honeycomb Wall Compliant Mechanism Clip Mount 2023-01-08 v1.2 Horizontal variant added 2022-12-11 v1.1 changed geometry and printing orientation for easy support removal and more reliable fit 2022-12-09 v1.0 initial public…

Spiral Tube Cable Protector

This was inspired by one I saw at my parents. Why pay $0.25 for one ($6 for a 24 pack), when I can design and print one for much more? This can print without supports using PLA. I haven't tried using TPU, but that might work even better.…

Ender 3 S1 Pro Bed Cable Clip

The Creality Ender 3 S1 Pro has a noticeable flaw with the bed cable. Due to the way it flexes it can rub on or even catch on the y-axis motor. This clip is a quick fix to straighten up the cable just enough for it to avoid the motor. It…

Cable Holder with Notch for Honeycomb Storage Wall

Just a slight modification to the original insert-cable-holder provided in the Honeycomb storage wall project which adds a notch to more securely hold a variety of cables. Adds a half-hexagon cut out above the cable-holder hole.

Type 2 cable Holder (Updated V2)

UPDATED to V2 V2 now has a hidden mounting plate for a slim design and easy installation. Make sure to mount the plate with the hole named “up” in the up position. Use at least 4 perimeters on the mounting plate due to stress on this…

Cable tie - powerstrip holder for Multiboard ("Underware" cable management system by HandsOnKatie)

Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)

ZipTag - universal cable tag label organizer zip tie style

Update: redesigned version available here: https://www.printables.com/model/607312-ziptag-v20 ----------------- Introducing ZipTag. Easy and quick to print (5-6min per piece) zip tie style tag. Useful for cables, bags and other items. I…

Starlink Mini Magnetic Mount and Cable Wrap for Vans

This is a mount for the new Starlink Mini antenna. It has spacers that can be scaled in the Z axis to adjust for different van roof ribs. They also act as a cable wrap for the 50 foot cable that comes with it. For the 2023 RAM Promaster I…

USB Cable Holder

This design is meant to hang 2 USB cables at the edge of my desk top. I originally designed this about 3 years ago. I decided to update it and make some changes for publishing. The original design was printed upright to allow clean screw…

Sovol SV06 Plus Print Head Cable Support

A support for the Sovol SV06 Plus cable which runs from the control board box to the print head. On my unit the metal cable support did not extend down in to the control board box, so the support was not firmly guided upwards away from…

Cable management clips

I printed my clips with PLA but the geometry is simple enough for you to print with any material you want. If you print the clips sideways, you won't need supports. Once printed, you can attach them to smooth (clean) surfaces using…

Cable Organizer

A robust holder of HDMI size cables & a smaller version for USB size cables.

Simple Phone Stand – Support‑Free Print for Portrait & Landscape with Cable Pass‑Through

This versatile phone stand is designed to securely hold your smartphone in both portrait and landscape orientation. The geometry is fully optimized for support‑free 3D printing, ensuring clean results, shorter print times, and efficient…

Cable Wall Clip for Nails

Cable Wall Clip for Nails Hey maker! 👋 Keep your cables tidy without buying huge packs from the DIY store. Features: Simple, fast-to-print design using minimal material. Three sizes included, or scale it yourself for custom fits. Perfect…

smartphone USB cable type C and A Protector cover

printed with PLA, but can be Petg or TPU. TPU would be best choice. If you need some help, or need change the sizes please contact me

Prusa MK3 / MK3S / MK3S+ LCD cable clip

It's specifically designed not to wiggle, as pre-existing LCD cable clips for the MK3(S) did and thus were unsatisfactory to me. The opening of the "hook" should point down for a clean look and easy insertion of the LCD-cable. If this…

VW ID.3 USB cable management

Spin it by 90° to have the big flat face on the print bed. Prints easily without support. I printed it in PLA(Prusa recycled PLA), although it might be better to print in a material that resists higher temperatures. A cable tie can be…

Iphone Lightning Cable protector

This are protector for the expensive original Apple Lighting cable, develop this thing to try to avoid buying new cables twice a year. Better if printed in TPU or flexible material, but works with PLA and ABS or Petg Basic setting, 0.2…

Cable duct / cable management for desks

Cable duct / cable management for desks The cable guide can be created in any length! To be printed: The upper end for screwing under the table top. The foot as the lower end. The narrow frame under the foot to create space for e.g. a…

iPhone Charge Cable Protector

A small twisted piece that wraps around the charge cable to protect the ends from being damaged from frequent pulling. This file is suitable for the original iPhone charge cable's size. May not be suitable for other cables. Print…

Cable Organizer (3 or 5 Cables)

I hate seeing USB and Charger cables laid bare on the table. Thus, I made this cable organizer to help in protecting the cables in the right place. 2 models are created and both bundled in the gcode (3 cables option and 5 cables option).…

60 degrees heater bed cable cover

Less stress on the wiring and more gap for twisting than shorter model. Slightly longer (9mm) but less prone to insulation melting. Modified from original Prusa model files. Use with original clip

Google Nest Mini 2nd Gen Wall Plug Mount - With Cable Stop Hooks

This is a very simple remix of Franco 's very elegant design of a wall socket mount for the Google Nest Mini 2nd generation. Instead of securing the cable with a separate back plate, I added three little “hooks” to retain the cable…

Cable Clip

I like to screw my cable clips instead of using nails so I did these. The bigger one for normal cables can be used with Ø3mm or Ø3,5mm screws. The smaller one with Ø3mm screws Printing They are designed to be printed on the side with no…

Cable Organizer

This fits gridfinfity systems and is 4x4 in size. There are 27 pockets, 3 different widths, and each has a 10mm radius at the bottom. I always prefer using Polymaker filaments. They print very well even when not perfectly dry. Very…

3D Printed Cable Holder – Multi Cable Organizer

📝 Description Keep your cables organized and always within reach with this minimalist 5-slot cable holder. Designed for desks, workspaces, gaming setups, home offices, and bedside tables, this cable holder provides five dedicated slots…

MK3 X-axis cable protection and strain relief

If the X-axis cable should break it will do so in a place where you can't solder a new wire to the broken one. It will be almost inside the stepper. With this very simple solution, the cable (if it should break) will do so outside of the…

MK3/S/S+ Heat Bed Cable Strain Relief - Short 60°

Added a 60° tail to the MK4 version of the strain relief. Made some additional cosmetic tweaks to the original files. Model is backwards compatible with MK3/S/S+ heatbed. Print per Prusa recommended settings. Update 10/6/23: The …btm.stl…

MK3S x-motor cable strain with cooling openings

I really liked the design by argoroots, and made a few tweaks to it: I added a rounded "gutter" for the wiring harness to nestle into; I split the gutter down the middle with a self-centering groove, so that it would tighten a little more…

Prusa MK3.5/MK3.9/MK4 centre tray/cable tidy (now works with Y belt tensioners and Prusa enclosure)

To follow on from and finish off my Ultimate Prusa MK4 casing I wanted to create a center tray similar to the original for the MK3 version . I was shown this cable cover and wanted to take this design and use it as the basis for the whole…

Bike - Brake Cable to Shift Cable Clip - Flat Front

A clip to hold 5mm brake housing and 4mm shift housing together on your bike to keep things nice and tidy and rattle-free. Flat front design solves the problem where cables may pull away from each other ( see this design ). Also, its a…

VGA Plug for Apple Lightning Cable

Inspired by the viral tweet , modelled by me and printed by you, this VGA cable cover for your Apple Lightning cable is just what your inner 90s kid needs. Included is a Fusion 360 parametric model so you can change the cable plug size…

LTT Magnetic Cable Organizer

Notice If you don't need a magnetic holder check out my latest design HERE ! This is my design of the idea seen in some of the latest LinusTechTips videos. I am sure they will eventually come out with a great product so do check out their…

Ikea PLATSA/22mm cable hole/grommet/entry

It's a thing you put in a 68mm diameter hole, so it looks nice if you stuff cables through it 🤷. It also adds a lid-thingy which prevents your cable(s) from falling back through the hole again. I made it for the Ikea PLATSA (HJÄLPA)…

Energy cable chain cover

Energy cable chain for power, data, coaxial and other cables. The chain is not open, the cables are inserted at the end of the chain. Optimized for 3D printing, three versions 20mm 50mm 70mm. STEP Files included. Printer setup: Nozzle…

Oculus Quest 2 Elite Link Cable Clip

Snaps firmly onto the rigid arm of the Elite Strap and holds the Oculus Link cable. The Link cable can be removed without removing the clip. Print instructions Print on one side; brim recommended for improved bed adhesion.

Screwable Cable Clip

Cable Clip with screw hole. Printable without support (sidewise).

Universal Cable Organizer

Advised to print the small one first :)

Power Cable Grommet IKEA PLATSA

A simple 2 piece grommet to neatly guide the power cable of the Prusa MK3S through the backplate of an IKEA PLATSA closet enclosure. Or any backplate that is 3mm thick. The diameter to drill in the backplate is 30mm. Inner diameter of the…

Cable Organizer Ties (Super easy - 150+ sizes!)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

usb cable guide

A cable guide or cable holder to avoid cables slipping of the table. Glues on the side of a desk with double sided tape. Cables can be inserted trough a lockable slit on the side. Prints in place. The normal versions have an inner tube…

3030 Extrusion cable clip

Created for Prusa MINI with mini base to clip X-Axis cable out of the way of the filament tube.

USB cables clip

MK3s X-Axis Strain Relief/Cable Protection

Removes strain from the x-axis motor connector. As the z-axis does not make fast moves, there is very little strain in the x-axis wire. However, the standard setup bends about the stepper motor connector. This strain relief moves the bend…

Cable Grommet

The visible hole in the back of my entertainment unit was distracting when watching television so I wanted a way to block it off while still letting the cables through. While the entertainment unit came with a grommet it had no shroud and…

Ender 3 V3 SE Heat Bed Cable Chain Mount

After creating https://www.printables.com/model/717326, I wanted the chain to have a tighter curve as I lacked space behind the printer. Then I found https://www.printables.com/model/717488 which seemingly has a tighter curve. Since I…

Cable Organiser - Cable Roll

Modular design allows volume expansion by stacking “cable-roll-ext-thewhatbrandsg.stl”. Suggested print settings: Layer height 0.2mm. Infill 15%. Perimeters: 5 (for strength). No supports are needed but follow the suggested print…

cable holder for 20 laboratory and test cables

cable slots 4 mm size W=30 x H=35 x L=164 mm best wall mounting with 3 x 20 mm countersunk screws. screw hole diameter 3.5 mm Print instructions print settings: PLA filament fill density 20% layer density 0.15 mm filament consumption:…

Cable management clip for Apple 70W USB-C Power Adapter

Cable management clip for the Apple 70W USB-C Power Adapter. Based on the 67W adapter model from Petr Albrecht (the V2 model), I made a new design to fit the smaller 70W adapter (28.6x65mm). The adapter suits the Apple MacBook Air with M2…

Cable routing and desk cover / Schreibtisch Kabelführung mit Abdeckung

Easy to print Print instructions Rafts: Not needed Supports: Not needed

Double Clip Cable Tie - Powerstrip Holder for Multiboard ("Underware" Cable Management System by HandsOnKatie)

Enlarged and modified version of @BobMcGlobus_870140 click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.) The original…

Display / monitor HDMI cable organizer

A simple HDMI display / monitor cable organizer. it's a quick print (takes 50min) but yet helpful to tidy around a display. Just stick it on the backside of your display using some double sided tape. A small slot is made to clip a slim…

Screwable Cable Clips

Cable Clips in different sizes: 1 x 3 mm 1 x 4 mm 2 x 4 mm 1 x 6 mm 2 x 6 mm 1 x 8 mm Printing Parameter: Material: PETG Resolution: 0.2 mm Perimeters: 3

Stand for Fritzbox 6660 cable

Vertical stand for the Fritz!Box 6660 cable. Inspired by https://www.printables.com/model/43735-fritzbox-7590-stand If you have a different model check if it has the same housing. The diameter should be around 54.5mm

USB Cord Cable Organizer

Quickly wrap and store USB charging cables around the home and office. Print in different colors to color code your cable organization. White for Apple, Blue for USB-C, Red for Micro-USB. ***New version added to accommodate larger cords!!…

Cable Keepers (rounded)

Since I had some trouble with my original Apple cables being incredibly fragile when bent too much, I decided to remix this. I rounded the corners to hopefully limit the stress that's put on the cables. Prints without supports. The…

Treedix USB Cable Tester Case

I wanted something for my tester to just clean off the lines of all the sockets. My goals were to keep the LED and test-points exposed, but I also wanted the case to be slim rather than the larger clear Perspex one Treedix sell. My…

Jumper wire/cable holder/organizer V2.0 (for Arduino, Elegoo, etc.)

Update 2nd March 2024: Version 2.0 is now available , based on very useful feedback, thanks all. stl files can be dragged into any slicer for gcode. STEP files and SolidWorks files are provided if you want to add your own holes (for…

Smartphone and Tablet Stand with Charging Cable Support / Handyhalterung und Tablethalterung mit Ladekabelunterstützung

I was looking for a smartphone stand with the option to charge the smartphone while in the stand. Since I couldn't find one, I designed my own stand. The current stand is actually the 5th revised version. This version has a hole on the…

VGA Plug for (Gritin) USB Cable

These are the cables that I use: https://www.amazon.de/gp/product/B0778FV6K4/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&th=1 Added a minimum amount of support material in the GCODE files. Printed fine like this and it just snaps together,…

Single Cable Holder - Only 1 gram!

I got tired of reaching down to the floor to find my cable everytime i wanted to charge my phone in bed, so i made a cable clip so that it's always attached to my nightstand. Been using it for one month before this upload with no…

Honeycomb Ikea Skadis pegboard hook for cables, scissors and more, all hex, parametric

This Ikea Skadis pegaboard accessory comes in beautiful honeycomb pattern and can hold many things, like cables, scissors, precision pliers and probably many more. It is part of my honycomb skadis collection. It has a hex shaped pin to…

Multifunction Arm mounting system Cable Clip

Cable Clip for the Multifunction (Small) Arm mounting system Features Fits on the “ arm-small-hex-honeycomb-wall-compatible ” Fits 4.50mm diameter cables

Gridfinity USB Cablemanager 1x4

This bin organizes my whole cable collection if you guys can see from the photos I use lots of USB Cables and keeping them organize was a challenge until now with this grifinity usb organizer I can pick i cable within seconds no thumbling…

Pixel Watch gen 1 charger with cable winder and plug mount (USB-C & USB-A)

Updates since initial upload: Date Description 02/23/2023 Added a USB-A version, to fit 3rd party adapters. The USB-A version is ~2.3mm thicker, and has been tested for the GEEMEE charger. Thanks to Martin Th. for providing me with the…

Cable Tidy Spool, for ⌀3.0mm Cables, 128 Sizes

I have designed these easy-to-use cable tidy spools to store a variety of cables in a neat and compact manner. My previous method of using rubber bands and cable clips was still problematic due to the cables tangling and the difficulty in…

19" Rack Cable Guide

A low RJ45 cable guide for 19" racks. It uses less than 1/2 HU and the holes are big enough for bigger plugs. To fix the dovetail better, use 2x M3x18 screws and 2x M3 nut. Some glue might also help.

Cable/Zip Tie Mount

Use this cable tie mount to cleanly manage and route cluttered cables. Attach it to the mounting surface with a screw and then use a cable tie to cleanly route cabling.

Cable Management Pack - Fusion360 Files Included (zip tie anchor, cable clip, etc)

Use #17 or #18 sizes nails for the cable arches Use #4 screws for the cable clamp and large cable clip For the ziptie anchor I recommend double sided adhesive foam (affiliate link): https://amzn.to/3w16Kq6 You may need to use a glue stick…

Cable Tie Organizer Box / Kabelbinder-Ordnungsbox

Cable Tie Organizer Box Wall-mounted or stand-up organizer box for storing and organizing cable ties. There are 6 slots with a diameter of 40 mm and a depth of 150 mm, 100 mm and 50 mm. --- Kabelbinder-Ordnungsbox Ordnungsbox als…

Wallmount + Cable Organizer for Electric Car Type 2 Plug (logo / no logo)

Wallmount and cable organizer for Tesla's Model 3 Type 2 plug. This is a remix of designs from users turtel89 & MB96 from Thingiverse to add a top piece to hang the cable. Update 21.01.17: Added version without Tesla Logo Print…

Desk cable grommet ø60, ø64 & ø73 mm

Simple desk grommet for a ø60 mm hole, covers ø75 mm in total ø64 mm hole, covers ø79 mm in total, table top thickness 37.5 mm ø73 mm hole, covers ø88 mm in total Lid snaps into insert so it doesn't come loose. If you need another…

cable organizer under the table v1

locking organizer for cables under the table

Elegoo Neptune 3 Max Cable Retractor

Utilizing a retractable badge holder to keep the cable up and away from the print area.

MK4 Heat Bed Cable Strain Relief - Short 60°

Added a 60° tail to the MK4 version of the strain relief. Made some additional cosmetic tweaks to the original files. Model is backwards compatible with MK3/S/S+ heatbed. Print per Prusa recommended settings. Update 10/6/23: The …btm.stl…