Search results: cb

Sort order

3,243 models

P
PrintablesAdrián Vidal

Laptop stand -Hex-Laptop,Macbook, iPad and e-book Stand-Organizer fully customizable

This is an stand for an latop iPad and an e-book with al hexagonal pattern. There is also a solid version if you prefer a cleaner look. If you want to modify it to fit perfectly on your devices follow these steps. Measure the width of…

Downloads
13,842
Likes
3,013
Rating
4.92
P
PrintablesCelta

MacBook vertical stand

Vertical stand for MacBook with holes for ventilation. I found giahuy2201 's model but I noticed that it was missing holes for ventilation. So I added holes on one side for better ventilation and hole design matching the entire piece.…

Downloads
2,868
Likes
539
Rating
4.97
P
PrintablesCaius Brindescu

Macbook Pro Stand

A stand to hold the laptop at an angle, so the display is in line with an external display. Print instructions I printed this with 0.2mm height and 15% infill, and it seems strong enough.

Downloads
2,290
Likes
286
Rating
4.69
P
Printables44sunsets

The Observatory: a parametric vertical laptop stand for the M1 Pro/M1 Max MacBook Pro (2021)

I couldn't find a vertical clamshell stand that meets my requirements, so I made my own. Fits the 14-inch and 16-inch M1 Pro/M1 Max MacBook Pro (2021 model), and is designed to be used with adhesive non-slip rubber feet. Beta version…

Downloads
2,081
Likes
273
Rating
4.95
P
Printablestoddanglin

MagicBand+ Charging Tower

Solve MagicBand+ charging chaos with this MagicBand+ Charging Tower. Designed to hold up to four (4) MagicBand+ charging cradles and a 4-port USB hub to consolidate everything to a single USB cable that needs to be plugged-in to charge…

Downloads
1,559
Likes
163
Rating
4.8
P
Printablespzett

MacBook Pro 14" 2021 Vertical Stand

This model is a modified version of the vertical stand for the 2016 MacBook found on ThingiVerse: https://www.thingiverse.com/thing:2130027 It has been adapted for the new 14" MacBook released in 2021. The slot matches the curvature of…

Downloads
1,070
Likes
114
Rating
5
P

macbook stand

this is a simple stand of macbook pro. Print instructions PLA, 14g, 35minutes with 0.3mm slice pitch.

Downloads
1,061
Likes
122
Rating
4.87
P
Printablesschwa

MacBook Pro Continuity Camera Mount

A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an MacBook Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to original .shapr source file.…

Downloads
1,047
Likes
85
Rating
4.8
P
Printablesnischno

Vertical MacBook Stand

Compatibility : Vertical Stand for MacBook Air / Pro with a thickness of up to 16.5 mm (17.5mm). Tested with MacBook Air 13" (2020, M1 and 2022, M2). Should work with any Laptop with a thickness of less than 16.5 mm. This includes MacBook…

Downloads
836
Likes
241
Rating
4.5
P
PrintablesTomáš Kemr

Apple MacBook Air M1 Stand with/without logo

Stable stand inspired by MacBook Air M1 shapes, holes on the bottom for self-adhesive 8mm non-slip pads. Optimal for charging and storing your MacBook if you want to save space on your desk. Printed with 4 perimeters (if you want to save…

Downloads
809
Likes
79
Rating
4.71
P
PrintablesAndy

Laptop / MacBook Pro elevator for cooling & air flow

Description I wanted something that could elevate my MacBook Pro 13" while letting me close the lid. Many other “elevators” hooked onto the sides of the laptop, preventing the screen from closing. Version 1 : a simple rounded bar, width…

Downloads
655
Likes
104
Rating
5
P
PrintablesPetr Albrecht

Držák na kabel adapteru (MacBook Air M2 - 67W)

Rámeček má vnitřní rozměry 28.6x73.8mm. Na adaptér se nasadí snadno a nehne se. Otvory na kabel jsou užší a ze začátku jde kabel do nich ztuha, ale časem se “ojedou” a kabel nevypadává. edit 23.7.2023: Nahrál jsem další dvě verze, kde…

Downloads
525
Likes
91
Rating
5
P
Printablesluposlip

MacBook m1/m2/m3/m4/Pro/Max stand (2022-2024)

This is the 4th revision of my MacBook Pro M1/M2/M3 Pro/Max 13"/14"/16" stand. Now 1 degree further back-tilted (and new text). Pro-tip : Small macbook pros and all macbook airs need felt pads for a snug fit. Add the pads on the back of…

Downloads
515
Likes
51
Rating
4.83
P
PrintablesSilvenga

Dewalt DCBL722 Leaf Blower Wall Mount

Here's a model to help mount the Dewalt DCBL722 Leaf Blower, wrapping around the handle for a secure mount. I've also included Fusion 360 and Step source files if you want to customize (includes a model of the handle itself). Bill of…

Downloads
509
Likes
62
Rating
5
P
Printables3D KIMBA

MacBook Pro Cable Organizer: Keep Your Charger Neat and Tangle-Free

MacBook Pro Cable Organizer: Keep Your Charger Neat and Tangle-Free September 29, 2024 Update: Added Cable Organizer compatible with thicker 4,5mm diameter braided cable. Product Description: The MacBook Pro cable organizer clip is a…

Downloads
486
Likes
74
Rating
4.67
P
PrintablesKanex

MacBook Pro 13 Charger Box (61 W usb-c European plug)

I created this box to be able to store the charger for my 13-inch MacBook pro. I was tired of finding the charger and cable at the bottom of my bag in bulk! I searched on the internet for something that would meet my expectations, but I…

Downloads
465
Likes
137
Rating
5
P
PrintablesNathanK

Non-MagSafe IPhone Continuity Camera Mount for MacBook Pro

This is a remix of samlovecroc's “Non-MagSafe iPhone Holder for Continuity Camera” that will support the MacBook Pro's screen depth and larger iPhones including those with cases on. The form of samlovecroc's design is preserved the…

Downloads
461
Likes
42
Rating
3
P
Printablesdodasch

Macbook Magsafe Cable Clip

Simple Clip for USB-C to Magsafe textile cables with 3.6mm diameter to wrap the cable around you power adapter Print the file in given orientation, may you should print more than one to prevent overheating (small part) or use the attached…

Downloads
448
Likes
68
Rating
4.75
P
PrintablesNiH

Soldering iron add-on for 'Adjustable PCB Holder Tool'

Simple add-on to hold a Pinecil type soldering iron when working with the adjustable pcb holder tool from @squinn. Snaps in to the cutout in the legs of the holder, can be mounted on either side for right or left hand use. Designed to use…

Downloads
448
Likes
269
Rating
4.67
P
PrintablesMadblam

4 slot Hex-Laptop,Macbook, iPad and e-book Stand-Organizer fully customizable

4 slot remix of Hex version of @AdrianVidal laptop charging stand.

Downloads
363
Likes
32
Rating
5
P
PrintablesHonzal

Renault CB 1:32 Titanic

toto je typ vozu, který spolu s lodí Titanic 15.4.1912 skončil na dně moře materiál PLA tryska 0,4 mm vrstvy 0,2 počet kusů naznačen v názvu souboru Pro přesné slepení dílů použij montážní otvory 1,8mm a kousky filamentu Další podobné…

Downloads
357
Likes
49
Rating
0
P
Printables365lyf

Remix Triple Universal Macbook / Laptop Vertical Stand

Remix of PlasticBarista's Universal Macbook / Laptop Vertical Stand, to accommodate three laptops.

Downloads
324
Likes
34
Rating
5
P
PrintablesDesmodromic

Double MacBook Pro 2020 Vertical Stand

Remix of @formulagp46 MacBook Pro 2020 Dock to accommodate two MacBook Pros in vertical orientation. I've checked this with both Intel and M1 13" MacBook Pro 2020 and with my wife's Intel 15" MacBook Pro and they all fit nicely. Will…

Downloads
320
Likes
37
Rating
5
P
PrintablesSFer

3018 cnc Adjustable PCB clamp

Can be used in any cnc machine that has the same spacing on the extrusion on the bed (15180 aluminum extrusion). Allows for large adjustments and fine adjustments. Hardware 9 - M3x20 (If you tighten too much on the pcb clamp it may…

Downloads
314
Likes
46
Rating
0
P
PrintablesArmand

M2 PCB Standoffs

I found that there are many people that posts M3 standoffs , but I could not find M2 standoffs for small circuit boards that I use in my Arduino Projects. So I whipped up a set of standard M2 standoffs in Fusion 360 in lengths that I…

Downloads
311
Likes
23
Rating
0
P
PrintablesAlpino76

Macbook Air 13” M1 vertical stand

Requires supports, do not scale it (the laptop don't fit in that case), 40% fill. 31/12/2023 - Updated Stl, Gcode and 3mf files. Added Step file.

Downloads
295
Likes
37
Rating
5

iPad Pro 11" to MacBook Pro 15/16 Connector

The iPad Pro can make a great second screen for your MacBook Pro especially with Luna Display or the new Sidecar feature. Even without these it can be useful to have some additional real estate for podcasts, research, etc. I like to view…

Downloads
288
Likes
84
Rating
5
P
PrintablesTmpx64

MacBook Charger Cable Protector / sheath / spiral / sleeve

Inspired by Majed's iPhone Charge Cable Protector design, this adapted to work with MacBook charging cables. I recommend to print vertically with brim for good bed adhesion. Even though this may seem like a simple model, it still takes…

Downloads
269
Likes
45
Rating
4.5
P
Printablesgig

Supporto MacBook

Supporto verticale per MacBook Air M1 adatto anche a altri modelli con spessore inferiore a 17 mm Dotato di fori per viti M4 e con testa di 8 mm ad incasso di 3 mm (interasse 140 mm)

Downloads
262
Likes
27
Rating
5
P
PrintablesLukasz M

Stable Laptop stand for macbook pro 13"

The stand does not interfere with working on a laptop. project with space for slip rubbers. Can be used with laptop case. Sugestion: Infill: 10-15% Honeycomb without top space on sides Inspired by…

Downloads
247
Likes
29
Rating
5
P
PrintablesObtuse

Better Macbook Air Stand 2018-2020 (M1)

A MacBook stand to combat turtle neck. More sturdy and stable than the original "MacBook Air Stand 2018-2020 (M1)". Works with MacBook Air 2018-2020 models. I recommend setting the internal fill to 100% in the area where the laptop is…

Downloads
242
Likes
32
Rating
5
P
PrintablesChris Trotman

Macbook Cable Saver

A cable saver / cable boot for the Macbook Retina Laptops (2012 onwards) Print with or without a brim or raft depending on your bed adhesion. Print instructions Print upright

Downloads
240
Likes
29
Rating
5
P
PrintablesBrad Grier

Laptop Stand - Macbook Pro (Early 2011 - 13 inch)

Simple angled laptop stand for my Macbook Pro. Wanted a sharper angle to take up less deskroom. Will likely support other laptops -- the gap between vertical supports is 17mm. Inspired by this design but rebuilt in Tinkercad. I wanted to…

Downloads
236
Likes
23
Rating
5
P
PrintablesMichaelKroes

M1 MacBook Air iPhone 12/13/14 Continuity holder

Easily use our iPhone with MacOS Ventura as a webcam. This holder hangs on the screen and holds your iPhone. It was designed to be printed with a .6 mm nozzle and a .3 mm layer height. It fits my iPhone 13 with an original Apple Silicone…

Downloads
236
Likes
43
Rating
5

Macbook stand - universal size

A simple macbook stand printed in one day. Universal size for most laptops on the market. Very simple printing. I recommend printing the middle with a resolution of 0.15mm, L and R at 0.20mm. For supports, see gcode (supports are very…

Downloads
232
Likes
58
Rating
5

☢ Soviet ICBM Launch Keys

Based on this model:

Downloads
213
Likes
34
Rating
0
P
PrintablesHonzal

Renault CB

materiál PLA tryska 0,4 mm vrstvy 0,2 počet kusů naznačen v názvu souboru Pro přesné slepení dílů použij montážní otvory 1,8mm a kousky filamentu Další podobné modely lze najít v mé kolekci “ Automobil ” number of pieces indicated in the…

Downloads
204
Likes
49
Rating
5
P
PrintablesKlabbis

RCBS RC IV spent primer catcher

spent primer catcher with side pipe for garden hose / tube with 12mm inner diameter. just klick in place. tube direct to a bucket or use adapter and drill a hole in water bottle cap for easy dispensing. modded the catcher and made also a…

Downloads
189
Likes
13
Rating
4
P
Printablesagarza647

PCB Holder

I decided to make my own PCB holder for soldering. I wanted the design to be simple but strong. The rods are ½-inch dia. from an old inkjet printer that I cut in half. They are heavy enough to hold the whole thing down without it moving…

Downloads
185
Likes
33
Rating
0
P
PrintablesMichaelKroes

Skadis holder for a M1 MacBook Air

This holds your MacBook air on a Skadis peg board. The inside of the holder is printed in TPU, this gives a soft cradle for the MacBook. The TPU are push in place. No glue is necessary. This has held my MacBook for weeks without issue,…

Downloads
180
Likes
27
Rating
0
P
Printablesjaaaco

Macbook Charger (87W) Holder

Printed originally on Alfawise U30, that's why it's so ugly ;) I wanted to keep my Macbook charger under the desk so it won't be on the floor. At a same time I wanted it to be easily accessible - so I came up with this design. It's…

Downloads
176
Likes
35
Rating
5
P
PrintablesRuda

Apple iPhone 14 stand for MacBook Air M1 Screen

I have designed a stand specifically for the Apple Air M1 screen, providing a secure holder for the iPhone 14. Additionally, this versatile stand can also be used as a screen cover for the built-in camera. Two models are included : one…

Downloads
141
Likes
24
Rating
5
P
PrintablesMichal K

Bruder JCB 5CX Hydraulic pistons replacement - more of them

No supports needed Infill irrelevant Resolution: 0.15 Printed from PETG Scaled to 105% to compensate shrinking

Downloads
137
Likes
8
Rating
5
P
PrintablesUloPe

MacBook Pro (TouchBar) Clamshell Stand

This is a desk stand for the “TouchBar” generation of MacBook Pros to run them in clamshell mode (i.e. with closed display). This should fit any 13" and 15" MacBook Pro with TouchBar (including the M1/M2 13" models). It will definitely…

Downloads
137
Likes
22
Rating
5
P
PrintablesCraftswoman.cz

MacBook charger protection

🇬🇧 – English – This protection is for MagSafe MacBooks for (mostly) European charger types. Unfortunately, my chargers from Apple bend very easily and a while ago it got to a critical point when I unpacked my stuff on a business trip and…

Downloads
129
Likes
31
Rating
5
P
PrintablesERIK3DP

Menlu Flexible PCB Board/Panel Mount for LumenPnP

This is a flexible mounting system for pcbs/panels onto the LumenPnP pick&place machine. It's composed of a base mounting plate with fixed brackets for one pcb corner plus movable support sliders for the remaining pcb edges. A grid…

Downloads
125
Likes
13
Rating
0
P
PrintablesTitan

MacBook Pro Camera Cover - Legend of Zelda Triforce Theme

Concerned about your MacBook Pro camera watching you and have a soft spot for the Legend of Zelda? You need this. A slip over camera cover specifically designed for the MacBook Pro 15" 2016-2019 (but likely fits other models too). Print…

Downloads
118
Likes
15
Rating
0
P
Printablessdaendi

Soldering assistance for small PCBs

The goal for this model was to find a solution for soldering small PCBs. I always had difficulties with holding the soldering iron stable and this is relatively important with small PCBs. That's why I wanted to design a soldering help to…

Downloads
103
Likes
53
Rating
0
P
PrintablesFred

MacBook Air Stand

This fits the MacBook Air Retina, 13-inch, 2019. I don't know the size of newer models. Works with PLA No supports needed

Downloads
102
Likes
7
Rating
4.5
P
Printablesplanetar

Macbook Air Stand V2

The use case for this stand is to hold the laptop up on my chest while I lie in bed and avoid getting cramps in my hands trying to balance it manually. This is my second take on the topic, ( v1 ) V2 is more lightweight and flexible. It…

Downloads
102
Likes
9
Rating
2
P
PrintablesBM

Macbook charger straightener

Use Asa for more safety, PETG works also well.

Downloads
98
Likes
20
Rating
5
P
PrintablesJerrod H

Peak Design Mobile Continuity Camera Mount for 2021 MacBook Pro

A magnetic mount to adapt Peak Design's Mobile Case to an 16" MacBook Pro (2021) for use with Reincubate Camo or macOS Ventura's forthcoming Continuity Camera feature. Requires 4x 10mm x 3mm refrigerator magnets and a suitable pause at…

Downloads
93
Likes
40
Rating
5
P
PrintablesPhil Caruso

Modular PCB Holder System

I created this Modular PCB Holder System to hold virtually any Printed Circuit Board (PCB) for soldering, assembly, and repair operations. It features a collection of components that can be mixed and matched to create the PCB Holder…

Downloads
92
Likes
33
Rating
0
P
Printablessparkstack

PXN-CB1 button box mount

I have an RSeat P1 and while the tubular construction is rock solid, it does make mounting add-ons more difficult than a profile rig. So, like anyone would, i bolted a slab of oak to it. The oak shelf lets me use a trackpad, streamdeck,…

Downloads
90
Likes
12
Rating
0
P
PrintablesEric Laroche

PCB Routing World Cup Trophy

Printed with 10% filling. The photo of printed model is in tricolor PLA blue green orange. No need supports.

Downloads
89
Likes
5
Rating
5
P
PrintablesBlockhead Maker

PCBite - SP Series needle protection

Hi For you who uses the amazing handsfree measurement system PCBite made by Sensepeek, I have made a protection cover for the SP-series of probes. SP10, SP100 and SP200 fits in the cover The covers can also be stacked by using the sleeve…

Downloads
88
Likes
8
Rating
4.67
P
PrintablesJOATZ

Macbook Pro Stand

A Simple stand for Macbook pro 15" 2017. You may be able to use it for other models. the feet on the back should prevent any tip-overs if you use it for a smaller laptop that leans a bit. Added lightening holes to reduce material usage.…

Downloads
88
Likes
19
Rating
0
P
PrintablesPrints&Kinks

@Cherry_Labs "Unique print in place laptop stand - Super portable - Adjustable angles" remix for 16” MacBook Pro (2023) or 14.29mm thick laptops.

Print-in-place laptop stand by @Cherry_Labs. I modified hook height for my 16” Macbook Pro (2023) or laptops up to 14.29mm thick, including the rubber feet. Cherry Labs recommends printing with a 0.4mm nozzle. See his model page for…

Downloads
64
Likes
6
Rating
0
P
PrintablesJellyTitan

ErgoDonk Zero PCB holding feet

This is intended to assist in the build process for the ErgoDonk Zero keyboard. These feet act as a ‘third arm’. They can be snapped onto the PCB to elevate it from the work surface while through hole components are added and soldered.…

Downloads
62
Likes
6
Rating
0
P
PrintablesSvěrákovi

MacBook Air M1 2020 Double slot Stand

Can by printed without supports if you don't mind some stringing on the bridged part. I suggests adding felt sticker feet on bottom to avoid sliding / scratching on table. If you're using laptop without a hardshell, add some felt stickers…

Downloads
52
Likes
5
Rating
0
P
PrintablesMarkus Lang

Homematic HM-LC-Sw4-PCB DIN Rail Case

An alternative base plate for the Homematic HM-LC-Sw4-PCB 4-Channel Switch Actuator using the https://www.printables.com/model/64242-din-rail-clip to be able to mount it to a DIN rail. The base plate requires two DIN rail clips that can…

Downloads
46
Likes
1
Rating
0
P
PrintablesKyphas

MacBookPro USB-C dust cover

Made this to fit my 2020 MacBookPro to help keep the USB-C ports clean.

Downloads
44
Likes
5
Rating
0
P
PrintablesPrintin'Monkey

BitKit2 Arcade PCB Enclosure

My print was done with in PLA and did not need any supports. There are two versions of the case. the first (and my favorite) has two screws that mount the PCB to the front of the case. This one just does a better job of holding everything…

Downloads
42
Likes
5
Rating
0
P
PrintablesMartin

Fridge Door Divider for Liebherr CBNesf 3913

This door divider is designed for the Liebherr refridgerator model "CBNesf 3913 Comfort BioFresh NoFrost". It is intentionally slimmer than the original door divider. I recommend to print the divider using PETG.

Downloads
38
Likes
9
Rating
5
P
PrintablesVrky

MacBook Pro - Memory Expansion Adapter for microSD card

I created a custom expansion memory card adapter for the MacBook Pro, designed to integrate additional storage up to 2 TB. This project involves soldering a microSD card to PCB that fits into the MacBook Pro's SDXC expansion slot. Once…

Downloads
29
Likes
11
Rating
0
P
Printablesschim hansen

Bag Hook for Evercross and RCB Scooters with Hook on back Side

A Baghook redesigned with Hook on Backsite.

Downloads
29
Likes
5
Rating
5
P
PrintablesAinon3Dtisk

Stand for Apple MacBook Air

Hello, I have here for Stand for apple mackbook air . Nice minimalist stand for your Macbook Air . You have 2 versions from me... v2 is better for me. The stand bears the logo of the bitten apple. Printing is not demanding! Good luck with…

Downloads
29
Likes
9
Rating
5

funnel-tube resonance chamber for small instruments like musicboxes

You can tune and soften the soundresonance with snowflakes from Oxa! I use this for the beautiful melodie snowwalz from Johann Strauß! https://youtube.com/shorts/lxx9WU_wVQM?feature=share Please look also for my new bigger 210mmXYZ…

Downloads
27
Likes
8
Rating
0
P
PrintablesClamikra

Battery case Black & Decker BDCB12B Akku (12V 1,5 Ah)

This case is meant to hold the battery “BDCB12B” (12V 18Wh) for Black & Decker Tools . The battery holder can be attached to the wall (using adhesive tape) and the battery can be charged via USB while sitting in the case. The charging…

Downloads
26
Likes
0
Rating
0
P
Printablessquinn

Custom PCB Rasberry Pi Case

A friend of ours created a custom PCB containing a display and Pico W for an engineering class that my son is a part of, and so we decided to create this 3D model of a case that could hold the custom PCB components. Case is approximately…

Downloads
22
Likes
12
Rating
0
P
PrintablesMatthew Schultz

MJS.ART 8" CBN Wheel Angle Guide

I have an 8" CBN (Carbon Boron Nitride) wheel on my bench grinder, and I needed an accurate angle guide for my woodworking chisels. This guide has 4 different angles: 17º, 20º, 25º, 30º The ends of the guide are purposefully arc'ed to…

Downloads
22
Likes
0
Rating
0
P
PrintablesNomads Galaxy

Coax CBL U.FL Plug Assist Thing

Plugging in the RFID cables for the MK4S was a pain in the butt, so I designed this tiny tool that could reasonably help hold and push the plug into place. Simply put the head into the tool, align it with the plug, and push down on the…

Downloads
21
Likes
6
Rating
5
P
PrintablesTHEOGGAMEZ03

1/10 SCALE RC 'CB Radio Antenna'

black PLA was used base at bottom is squared off for attachment to RC

Downloads
21
Likes
4
Rating
0
P
Printablesnicolas0071998

Ikea KNARREVIK iPad/Macbook holder

iPad holder for the Ikea KNARREVIK bedside table inspired by @roofuskit_86325 Use the 4xM5 original screws The iPad used here is the iPad Air 4th 11.9 inch screen with an ESR case The Macbook used here is the 13 inch Macbook Pro 2015…

Downloads
20
Likes
6
Rating
0
P
Printables3DPrintOtte

Case for esp32-eth01 with custom pcb

Case for esp32-eth01 with custom pcb link for custum pcb for esp32-eth01 https://www.huizebruin.nl/product/esp32-eth01-ethernet-pcb-scr-con-01/

Downloads
19
Likes
4
Rating
0
P
PrintablesInsaneDruid

IEEE-488 port replacement shell (for CBM 4023 or similar)

Notes: Remounting the port is a bit fiddly, try to align the row closest to the outside first. Good way of doing this is by applying some slight downward pressure and slowly pulling the pins over the holes in the PCB. Then align each pin…

Downloads
19
Likes
2
Rating
0
P
Printablessascha

GMKtec NucBox5 dovetail Vixen / Losmandy mount

This is a mounting plate for the GMKtec NucBox5 mini PC. The mini PC has two M2 screw holes on the bottom, which I use to attach the plate. The plate itself provides two positions for M4 hexagon nuts, allowing it to be mounted with the…

Downloads
18
Likes
1
Rating
0
P
PrintablesNomads Galaxy

PZ Probe PCB Mount for Stealthburner and LDO Nighthawk 36

This is a simple little model that works with the Clockwork 2 Extruder for the Stealthburner. I'm using a E3D PZ Probe on my Voron, and wanted to keep everything within the toolhead, since I'm using a Nighthawk 36, the PCB for the…

Downloads
17
Likes
7
Rating
0
P
PrintablesAlVaz

HyperDrive replacement for MacBook Air M2

This Hyperdrive model is the original HyperDrive Hub for iPad Pro M1, I redesigned the plastic part and now it fits the Apple MacBook Air M2. Because of it been the very first model of HyperDrive the audio i/o of this model does not work…

Downloads
17
Likes
1
Rating
0
P
Printablesluisriverag

MacbookPro 2007/2008 vertical stand

You might want to use the 50% height option to save materials and printing time depending on how stable you need it to be

Downloads
16
Likes
0
Rating
0

PCBite Magnetic Angled Mirror Mount

I made this angled mirror holder to allow easier viewing of LED indicator lights on the underside of a PCB. This is useful when I have the PCB fixtured upside down in order to access test points on the opposite side of the board. If the…

Downloads
15
Likes
0
Rating
0
P
Printables3DPrintOtte

ESP32 ETH01 Ethernet PCB – SCR-CON-01 case

Behuizing voor ESP32 ETH01 en custom pcb van huizebruin.nl

Downloads
15
Likes
1
Rating
0
P
PrintablesInsaneDruid

Commodore CBM PET 8032-SK hood stand retrofit (screwless)

The 8032-SK model of the classic Commodore CBM PET lineup does not feature the iconic “hood stand” that holds the case open for easy access. With these parts, you can retrofit a similar stand that securely holds the case open between the…

Downloads
14
Likes
1
Rating
0
P
PrintablesOssilampe

Case für PCB Aktor Homematic IP

Gehäuse für einen Batteriebetriebenen Homematic Aktor “Siehe Link” Meine Frau Ihre Deko bekommt so immer ein paar kleinen LED Ketten, mit Einbindung in das Smart Home Die 6 ist für eine leichte Identifizierung.

Downloads
13
Likes
2
Rating
0
P
Printableswenjuk

MacBook Pro 140W Powersupply holder

Das 140W Netzteil kann mit dieser Halterung ohne Werkzeug heraus genommen werden und ist nicht fest verbaut. Einfache Montage mit 4 Schrauben 3x16 mm mit Senkkopf. The 140W power supply can be removed from this bracket without tools and…

Downloads
11
Likes
2
Rating
0
P
PrintablesMaty1987

Adafruit Voltage booster/Regulator PCB Enclosures

adafruits voltage regulator/filter PCB enclosure with 4 pin Connector fitted Header, Vertical, 4 Way - Jst (japan Solderless Terminals) | CPC Connector Housing, 4 Way - Jst (japan Solderless Terminals) | CPC Crimp Terminal, XH, 28-22AWG -…

Downloads
10
Likes
2
Rating
0
P
Printables3DPrintOtte

case and cover for esp wth32-01 with custom pcb and LM2596

case and cover for esp wth32-01 with custom pcb and LM2596 you may modify it as you see fit you can get the custom pcb for the esp32 wth-01 at: https://www.huizebruin.nl/product/esp32-eth01-ethernet-pcb-scr-con-01/

Downloads
9
Likes
1
Rating
0
P
Printablesclusterfuggles

2x2 Square Polypanel with PCB standoffs

I used the Solidworks Polypanel snap connector design from here . More info on polypanels can be found here . This 2x2 Polypanel is part of a test fixture for an LED display. I added standoffs to hold an LED array. It can easily be…

Downloads
9
Likes
1
Rating
0
P
PrintablesPK31415

PCBite Probe Adapter

I needed a way to securely attach my scope probes to PCBite. I like the gooseneck that they provide but i'm not a fan of the probes. I wanted to just reuse the scope probes I already owned. The hole on the bottom of the part was designed…

Downloads
8
Likes
0
Rating
0
P
Printablesschim hansen

Bag Hook for Evercross and similar RCB Scooters

Der Haken benötigt noch 4 mal M4×16 er Schrauben und muttern. Die Muttern am besten geführt mit einer schraube von hinten eindrehen um den sechskanteinsatz nicht zu beschädigen

Downloads
7
Likes
2
Rating
0
P
PrintablesJoel Mapes

Vacbird filament storage bag spacer

Simple tool stays in the bag after sealing. No supports needed. PLA or PETG at 15% infill.

Downloads
2
Likes
0
Rating
0
P
Printablessquinn

Adjustable PCB Holder Tool

A handy tool to help with soldering, de-soldering, or other tasks where you need a steady third hand. This is a fully printable design, so no other hardware is required. With the largest base (as shown in the pictures) the clamping…

Downloads
22,066
Likes
7,534
Rating
4.92
P
PrintablesDET-Man

Better Dock and Mount for the PCB Klicky Probe

While the world seems to talk about eddy current based sensor probes nowadays, I still like the little PCB Klicky 🥰. So building my 2.4 I just optimized what is out there to dock the probe securely in place. Support me : Please leave a…

Downloads
14,695
Likes
231
Rating
5
P
PrintablesRCMakerLab

Super Stable Bench Drill For PCB. 3D DIY Bench-Drill For Hobby Workbench.

Many parts of the Mini benchdrill are designed for PLA filament. A few parts are designed for heat-resistant filaments (Petg, ABS, ASA). Assembly steps and details are shown in the video. This design has an automatic start-stop feature…

Downloads
5,744
Likes
898
Rating
5
P
Printableskth0

Macbook Stand

A laptop stand for use with an external mouse/keyboard. Featuring: Better video call angles (no more double chin!) Line it up with an external monitor Space for one of those clicky clacky keyboards underneath Tip it down for “almost…

Downloads
5,438
Likes
893
Rating
4.97

PCB Circuit board - Business Card Embosser Roller

Description For this to work you have to download the casing from my Business card Embosser (LINK!) For al electronics and PCB entheusiasts! PCB / Circuit board Rollers for the Business card embosser! (Only rollers, no casing) More…

Downloads
4,415
Likes
2,546
Rating
4.94
P
PrintablesLoogle

GaggiaBoard PCBv3.1/v4 Housing (Gaggiuino)

Status: Released! Compatibility Warning! PCBv3.1 and PCBv4 (with onboard STM32 chip) are the only compatible PCBs. PCBv3 (which uses the WeAct BlackPill) is not compatible and should use the Protective Housing . Description This housing…

Downloads
3,432
Likes
137
Rating
5
P
Printablessamwiseg0

ratgdo32, v2.53i, v2.52i, v2.5i, v2.5, & v2.0 PCB Case / Enclosure

Since many of the new Chamberlin/LiftMaster garage door openers do not have removable light covers, including mine, I decided to make an enclosure to prevent any shorts and keep the PCB properly protected. This is an enclosure for the…

Downloads
3,225
Likes
278
Rating
5
P
Printablesbw3dp

Parametric, stackable PCB standoffs (M2-M14 holes)

These are fully-stackable PCB stands and hole gauges. I made three step sizes, 1mm, 2mm, and 3mm. The peg diameters go from M2-M14 (M2, M2.5, M3, M4, M5, M6, M7, M8, M10, M12, M14), and have a 4x step base. These are great for putting…

Downloads
2,340
Likes
1,122
Rating
4.91
P
PrintablesTangibility

FULLY 3D PRINTABLE Helping Hands/PCB Holder

FULLY 3D PRINTABLE - Single and dual gripper helping hands/PCB holder, included models with and without magnetic base support! The magnets it uses are 10mmX5mmX2mm rectangular magnets. Recommend printing in PETG, or some plastic that does…

Downloads
2,193
Likes
603
Rating
4.78