108 models
Exactly like the original model ( https://www.thingiverse.com/thing:2803664 ), but I've repaired it and split into 2 parts (otherwise slicer splitting could fail, etc…)
Print this Model without any supports and with a layer height of .2 mm and 90% infill. You may need to heat up the cap after printing to make it conform better around the USB-A connector so it won't fall off. To close up the enclosure use…
NOTE 2/01/26: Tool works great on the Centauri Carbon 2. Just received my CC2 and the back right corner was lower than all the other 4 corners. UPDATED MODEL : Since this tool seems to be helping people get the bed aligned I made some…
A simple back hanging waste system for the Centauri Carbon 2. It uses the existing screws to secure it to the machine. It slides off and on easily, and holds a large amount of poop for those long jobs. I could've cut down on the amount of…
PTFE tube holders.
Canvas bypass for TPU & Spool Holder - Elegoo Centauri Carbon 2 (CC2) This is our "Made in Cave" solution for printing flexible filaments on the Elegoo Centauri Carbon 2. Description While the CC2 is a beast, printing TPU requires…
This is completely redesigned toolhead cover for the Centauri Carbon series that improves on print quality, durability and noise. Now also supports CC1 Canvas and CC2 ! Key improvements Lightest toolhead cover available with good center…
This is a PTFE tube holder designed to manage up to four 4mm PTFE tubes. I was getting a lot of issues with Tangle Errors due to the high speeds of the Centauri Carbon 2 and the PTFE tubes moving around a lot. Since installing and have…
I present you a new top cover for the Centauri Carbon 2 w/Canvas! My design is shorter, only 172mm tall, while still allowing full motion. The stock PTFE tubes length has been shortened by ~70-75mm. The Canvas has been relocated lower in…
🇫🇷 Description (Français) Porte-outils magnétique – Centauri Carbon 2 (CC2) Ce porte-outils a été spécialement conçu pour la Centauri Carbon 2 afin de garder tous les outils essentiels toujours à portée de main. Il est équipé de 8 aimants…
at the end of a ABS print the vent fan kicks in to lower the chamber temperature, it runs it through the carbon filter inside but that thing is extremely limited in capacity. I made this to accept 1 to 2 sheets of the carbon filter…
updated to better accommodate spools without rubbing. If it imports large, scale it to 10%, I will reupload asap. An adapter so that you can put Elegoo rewind spools from CC2 in the Sunlu S4 drier. Without rewind, color changes will cause…
Same as the original model, but instead of the big logo-hole, it has neat ventilation stripes.
This is a functional upgrade kit designed specifically for the Elegoo Centauri Carbon 2 . The set includes custom-fitted Dust Guards integrated with bed alignment tabs . These components are engineered to shield the printer's motion…
These are to attach the PTFE tube to the Flexible Filament Adapter for the Centauri Carbon 2. These create a snug fit so the PTFE tube does not come out of the Adapter. File is setup with 3 of each which you will need for the adapter.…
Replacing the hotend on your Elegoo Centauri Carbon or CC2 means wrestling two tiny JST connectors — the thermistor and ceramic heater — back into their ports blind, one at a time, in a cramped space. It's fiddly, it's frustrating, and…
Why don't use Olimex ESP32 in ESPHome bluetooth proxy for Home Assistant also as a router? In one case? Grab your spare CC2530, flash router firmware, print the case and connect Vcc and GND to Oli ESP32 PoE board. Insert into case not…
Made this in FreeCAD to hold spare hotends and nozzles on the side of the printer. There are probably better ways to do it but this works for my situation. There are four files one each for 0.2mm, 0.4mm, 0.6mm and 0.8mm. The holders use…
Side-Mounted Waste Bin for Elegoo Centauri Carbon 2 from Elegoo.
This is an easy printable one-piece case for the CC2531 Zigbee Sniffer Board with external antenna. Print the case standing without support and slide the USB dongle in from the back. It should stay inside just by friction. Let me know, if…
1st layer test for ELEGOO CC2 maybe CC1 too Feel free to test
TPU Adapter for Centauri Carbon 2 Combo A remix of the TPU adapter for the Elegoo Centauri Carbon 2 Combo . This adapter requires 2 × ECAS04 push-fit connectors for connecting the PTFE tubes. Required Materials 2 × ECAS04 push-fit…
Remixed for devices with external aerial Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.16 Infill: 25% Filament: ANy PLA Black Category: Computer
raspberrypi5 compact case with 2mm thickeness + x1001(nvme adapter) + ssd1306 case + official active cooler m2.5 flat nuts(x6) and 16.5mm standoffs(x3), which containing in x1001 Jan 28th, 2024 - SSD1306 was moved through other side, and…
I used double sided tape to stick it under the wast shute. I printed it in PETG, but PLA should work just fine. I'm still learning this printer and not sure how much waste I'll generate. Scale it as you see fit. Infill 15 2 walls
This is a CC2531 cover with HomeAssistant logo, based on the CC2531 Zigbee dongle Case by hansaya Print Settings Printer: Anet A2 - Modified Rafts: No Supports: No Category: Gadgets
I took inspiration & geometry of some of my favorite builders on here. Spliced together this beast using only my slicer. It is a rough draft, and you'll notice some crude splice points. I'm hoping this talented community takes this,…
This dongle is based on the previous designs for the dongle. I have made some cosmetic changes to the corners and rounded the edges. Also I have included a mounting bracket so I can mount the dongle independently from my Raspberry pi. You…
Box for a Raspberry Pi 3b+ with an internal SSD drive using a SATA to USB adapter. There's also a slot designed for a Zigbee CC2531 key. 8 X (8mm / 0.8 mm) magnets Printed on an Ender 3 with PLA at 0.4mm. DIY :…
A case for the Aideepen Zigbee CC2531 Sniffer USB stick, it might fit other models as well. With button access.
Printed perfect with: No Supports PETG or similar Shout out to Slava for the original design!
Cable chain system with 25x15mm internal cross-section. Cables and chain links can be inserted through a simple clip. Bend-angle on a single hinge: 45° upwards, 30° downwards. 40mm bend radius. Your printer should be able to print 0.2mm…
Mine printed bad cus i tryed to use petg as support interface but did not work so well.
We've built a neat ethernet cappable ZigBee Coordinator for use with zigbee2mqtt, io.broker and alike. It can be bought here: https://shop.codm.de/automation/zigbee/40/zigbee-cc2652p2-tcp-ethernet-coordinator It's based on the CC2652P2…
Simple remix from : https://www.printables.com/fr/model/47038-cc2531-zigbee-dongle-case-striped Instruction : Logo/image Print Settings : Resolution: 0.2 mm first-layer-height : 0.2 mm skirt : no expert mode/advanced → extrusion width →…
Simple Case for Wireless USB Zigbee CC2531 Module
Gridfinity Elegoo CC2 Tools: -3x1 for allen keys -3x1 for screwdrivers It's a remix from: https://www.nexprint.com/en/models/G6806487 https://www.nexprint.com/en/models/G5139802 I added holes for 6x2mm round magnets and I erased bottom…
Allows you to mount the 100mm straight exhaust duct to the CC2 using the screws that came with the machine, no longer screws needed. By narrowing the width of the duct around the screw mounting points and removing material in these areas,…
This is a case for this Router: https://www.zigbee2mqtt.io/how_tos/how_to_create_a_cc2530_router.html For the great zigbee2mqtt Project. I designed the Print without screws needed everything snaps together and is printed on an Original…
I needed a top-rear mounted spool holder as my TPU was dragged too hard from the default location of the CC2 (not combo). I found the mentioned original model but that mounts to the left side of the printer and I only have space on the…
Remix of the LaunchXL Enclosure by millibyte for the TI LaunchXL CC1352P-2 (longer than original because of PCB-Antenna and SMA-Socket) Changed some details to make it fit M3 Screws from the bottom and added the Zigbee 2 MQTT Logo :) Hope…
rotatable single filament ptfe tube holder. mounted where canvas system used to be. it has to be printed in three parts. the universal mount gets on the canvas mount. the arm can be slided onto the universal mount and be rotated so every…
extra cable management cylinders due to the canvas only coming with one, print with your printer's 'fine' preset for more cable clutch power
A simple adapter to give the CC1 canvas rewind spools the same mounting as the CC2 fixed orientation and added original spacer back on
This is a remix of "Chelsio CC2-N320E-SR (B) Dual-Port PCI Bracket" by CleverBullet https://www.thingiverse.com/thing:2822831 But it is half height instead.
A filament purge bin for Elegoo Centauri Carbon 1 & Centauri Carbon 2 machines. It may fit other machines where the chute width is about 42mm wide or less. The first model is 78mm in height (71mm internally usable for filament waste)…
Zigbee communication interface - USB pcb cover
Case for zigbee router on universal PCB with HLK-PM03. https://www.zigbee2mqtt.io/advanced/zigbee/05_create_a_cc2530_router.html
Inspired by this thing and the creator's invitation to design a better bottom lid, I decided to create a snap-together housing for a Zigbee router using a CC2530 + CC2591 + HLK-PM03 as described here . This version houses the CC2530 +…
Another spool adapter for an Elegoo Centauri Carbon 2. 15% infill 2 walls
heres a direct copy down to the mm of the connector that holds the retractable spools to the side of the elegoo centauri carbon 2. i got fed up with searching trying to find one. so i decoded to design my own. i printed mine in pla but…
This is a spool holder for small spools with a 30mm hole or more. It fits directly to the original Centauri Carbon 2 spool holder mount (check the photos to make sure you have the same mount as the CC2 ships with two different types).…
A simple wall mount for Electrolamas popular CC2652R zig-a-zig-ah! (zza)
(DK) Skruefri kasse til CC26X2R1 ZigBee Board. Udskriv langsomt, min tid 4,5 timer for begge (EN) Screwless case for the CC26X2R1 ZigBee Board. Print slowly, my time 4.5 hours for both Buy LAUNCHXL-CC26X2R1 Website: Robotnet.dk Rbx.dk…
A simple and small hook that lets you hang the CC2 tool head cover on the drag chain. It lets you keep the tool head out of the way when swapping the nozzle (or hotend) without unplugging the tool head cover fan. I printed it with 100%…
Elegoo Centauri Carbon 2 Aux/Assistance Fan 45° Deflector Redirect airflow directly down to the print bed. Helpful if you run the fans after prints to assist in cooling the build plate. Do NOT point this model upward to direct air towards…
stock elegoo settings canvas not working so i made a single spool adaptor cause the cc2 spool holder feels restrictive made to go with single filament PTFE tube holder on Bracket Festo from tobiaz https://www…
Like the original model, but without hole for the external antenna.
A simple adapter to tightly fit the Gembird spool to Elegoo CC2 Outer diameter 60mm Inner diameter 55mm Why? Elegoo Centauri Carbon 2 has these spool holders with springs in them to rewind the fillament after each use, if it does not…
I really like my String Swing rack, but the guitars tend to fall over. (Perhaps I'm unusual in having mostly soft cases). To keep the guitars up, I created these separators. They're just a little bit tall for the crossbar - you could edit…
Adapted the USB hole for a better fitting, dimension reduced to make it compact. Is adapted for my board antenna plug, maybe you have to make some adjustments due the antennas are not soldered equal. A remix…
If space is tight then this should suit. It uses a mini toggle switch available from Jaycar. Printed in PLA+
Case for a CC2538-CC2592 development board module. These are Zigbee modules which I use to control my lights, thermostats and other stuff. They offer great range and can be found on Aliexpress for 20-30 dollars. I printed this without any…
I designed a case for my zigbee 3.0 USB stick which I soldered myself with an popular PCB from ebay. The PCB fits tight (just sand the PCB a little bit if it is to tight). It has a Zigbee logo on its top which you can print in colors easy…
it holds 0.2-0.8 nozzles 2 of eatch and has 6mmx3mm holes in the back for round magnets.
A simple press fit and slip over top for CircuitSetups v2 Zigbee stick https://circuitsetup.us/product/usb-zigbee-stick-z-stack-coordinator/ Note: only for version 2. Printing: I used PETG, 0.6mm nozzle. Should work fine with almost…
The USB stick is fragile and the USB port tends to bend easily as the protective plastic around the stick opens very easily I designed a simple 3D model that prevents the cover from opening and limits the possible looseness that allows…
This is a remix to fit the longer debug pin version. Not the finest work on the inside but got the job done. I've made the holes in the case slightly smaller than 3mm so you can screw in M3 to fix the parts together. No-text version has…
Allows the use of clip-fit ptfe tube connectors.
Mein Remix vom Gehäuse von cod.m. Ich habe noch zwei Schraublaschen und Lüftungslöcher zum bestehenden Gehäuse hinzugefügt. Ansonsten ist das Original Gehäuse echt Top und passt super zur Platine. Die Platine gibts hier:…
In English below. Ich habe das Gehäuse neu designt, da es nur für das CC26X2R1 Board zu groß war. Weiterhin habe ich die Öffnung für die GPIO Ports entfernt, welche als Zigbee Coordinator nicht benötigt werden. Um die GPIO Ports komplett…
A 2x3 Gridfinity Holder for the Bosch Self Centering Bit Set No. 6, No. 8 and No. 10. The Box is 3 High.
This is a printable insert replacement for the CC2 that is compatible with the flexible filament adapter. This allows you to use the hood while printing without having to remove the adapter. To remove the stock one it's the reverse of how…
This is a gap filler for the centauri carbon 1 that is using a centauri carbon 2 top hat. It fits pretty well I ended up using tape to hold the dovetail joints a little stronger on the thinner sections. for the cut models i removed the…
Printed with supports. Recommend Tree/Default.
Because I was very irritated by the constant collection of filament waste particles, I modeled this basket for their collection. There are viewing slots on each side of the basket to check the filling. The basket is placed on a holder…
Kit must be equipped with original plastic feet, that slide into the 3D printed shell. Printed vertically.
Unlike all other cases I could find, this one protects the USB and SMA connectors. Needed "vitamins" are two M3 heatset inserts and two M3x20 countersunk screws. Print Settings Printer brand: Creality Printer: Ender 3 V3 SE Rafts: No…
I remixed the frame to include this https://www.thingiverse.com/thing:4557709 CC26X2R1 Case.It is simply pushed in and sits firmly. Link to the Rack Mount: https://www.thingiverse.com/thing:4125055 Category: Computer
Flashforge AD5X Spool Holder Adapter for Elegoo Centauri Carbon 2 (CC2) I love my Elegoo Centauri Carbon 2, but there’s one thing about it that has been driving me crazy: the original spool holder. When using plastic spools with grooves…
Needs riser feet: the flat backplate only fits with the printer raised on riser feet; on the stock feet there is no way for the screen to sit flat. I use my rigid feet for the CC2 . What it is: a replacement back shell for the touchscreen…
Printed and functional remix to fit true 12 inch by 12 inch (305mmx305mm) up to 1/8 inch (3mm) thick panel for top using Printed Raw Designs Centauri Carbon 2 Top Cover w/Canvas Relocation - Free 3D Print Model - MakerWorld
I have created a housing for my CC2530 - CP2102 Zigbee2MQTT Coordinator. The case does not need any screws. Just press the two parts together. Wiring: CP2102 - CC2530 GND - GND 3.3V - VCC RX - P03 TX - P02 Print instructions Category:…
Better version of the first model with tool
Remix of a remix of a great model. I modified the upper tabs that connect to the back cover as I had problems removing that extra material behind the locator pins (see photos).Removed the blocks behind the locator tabs on the top of the…
took this basic bumper printed it in tpu and cut parts to match the ECC2 new PCB layout. Then took that and added negative parts that matched my cuts in the slicer.
Enlarged Version of Jeremy Sapp's Design. Fits with the Original Mounting Bracket. Does not block vent.
After printing the CC2 top cover from Printed Raw Designs, I figured I'd try modeling an adapter of sorts to use the original top glass for the CC2 instead of buying a sheet of acrylic. This is only the second model I've made in Fusion,…
Door parts for Christopher Lee's CC2 Drybox, with coloured sections seperated out to be superglued in. These parts are nearly identical to Christopher Lee's original parts. The only major changes are that I have separated the differently…
Adapter for smart print and professional lab filament spool to not slide of the printer
dor handel + scraper holder
NIT Filament Spool Adapter for Elegoo Centauri Carbon 2 (ECC2) A simple 3D-printable adapter designed to make NIT (НИТ) filament spools compatible with the original Elegoo Centauri Carbon 2 (ECC2) spool holders . Some NIT filament spools…
Bonjour, J'ai reçu la ELEGOO centauri Carbon 2 il y a quelques jours et j'ai très vite été ennuyé par le fait de ne pas pouvoir accrocher le porte bobine en haut, sur le côté de la machine. Il faut obligatoirement l'installer en bas si…
Uh wasted too much time making this and over-complicated it. Was trying to mount some hepa filter I bought online to the back of the elegoo cc2. Left f3d files if you want to edit the magnet sockets with fusion. Theoretically should work…
Because original placement of filter in CC2 is pure insult (it covers only half of the vent) I created this simple model. Now you can relocate it to actually properly filter 100% of the exhaust. You can use filter that was already…
This is a Canvas Bypass that does not need any additional parts or pieces, no fittings, no bolts, no cutting PTFE, no assembly, no nothing. Print and install right off the bed. This can only be installed with the top hat off and I…
![[OECC2] 25x15mm Cablechain System Print-in-Place with clips](https://media.printables.com/media/prints/1161407/images/8915763_c379734f-27b4-49d9-aa5e-6aaf6c7de211_d0d3623c-9690-49de-8063-aed342546209/b87460c0-58f0-49c7-a329-0dfc596cf033.png)
