Chimera fidget
print nicely and fast but configure your perimeters to only have 2. 0.65mm at 100%
- Downloads
- 5,390
- Likes
- 645
- Rating
- 4.74
167 models
print nicely and fast but configure your perimeters to only have 2. 0.65mm at 100%
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Author: John Gosper (Kintall) https://www.thingiverse.com/thing:758165 Awesome Demon Girl Bust from Kintall. Prusa Research added bra, as original model can be considered NSFW 🙂
BD1 “Chimera” Made in Poland Chimera is 2,2" freestyle cinewhoop type drone, for 3S batteries, with fully 3D printed construction Ready-to-flight mass(with lamp, battery and wings) : <200grams Carry weight : Can fly with light action…
A chimera perfect for your tabletop game! Print each piece with supports and a brim as flat as possible. Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the…
A GOKU GM10 Pro V3 GPS holder that fits the original parts of iFlight Chimera 7 Pro V2 backend. It is designed so that the GPS can be slid into the holder although it's a tight fit. Also has a lip on the top for extra protection. Print in…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
This is a remix of Armatures design (Thing: 4819929). They had already designed what seems to be a perfect replacement for the official iFlight gopro mount for the Chimera 7. The only issue I had is it didn't feature a countersunk hole…
Description in progress. I used to have a Chimera 7 frame, but I lost it some time ago when I was flying long-range. I bought a Chimera 7 Pro V2 and then realized that its panels are designed specifically for small iFlight7 FC boards and…
I designed and created two components: a camera mount with a TPU soft mount and a GPS/antenna mount. The camera mount itself was printed in PETG, while the soft mount was printed in TPU with 100% infill. The original DJI cable was…
Unfortunately, iFlight does not provide model files for the original GPS mount of the Chimera7 pro and so far I have not found any model files for it on the net. I wanted to print all the TPU parts of my copter in yellow, so I…
I needed something to keep the snow from packing into the frame during snowy winter flights (mostly takeoffs and landings) in the Rockies. These panels are designed to cover the sides. They clip securely into the existing frame parts.…
This GoPro mount fits the GoPro Hero 9, GoPro Hero 10, GoPro Hero 11. With an insert for TBS ND filter
This is designed for the Chimera 7 Pro V2, however it “may” fit the Chimera 7 Pro or Chimera 7 (no guarantees). TPU not recommended since it is a snap fit, and harder plastics are better at deflecting the prop without breaking it anyways.…
**Work in Progress** Tested** *Updated - May.25.23 *Made For iFlight Chimera7 Pro V2. Can fit other 7-7.5 inch models, Verify yourself** • Prop Guards V6.4 - I added MT30 Connector Holders with 2 Zip Ties slopes. • Prop Guards V6.3 - I…
Earthly Chimera (or Monstrous Goat) Size: Large Type: Monstrosity Armor Class: 15 (natural armor) Hit Points: 85 (10d10 + 30) Speed: 30 ft STR DEX CON INT WIS CHA 19 (+4) 12 (+1) 16 (+3) 6 (-2) 10 (+0) 7 (-2) Senses: Darkvision 60 ft,…
I like the Vifly Finder 2 Buzzer for being cheap, functional and reliable as far as I can tell Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 30% Filament: SainSmart TPU emerald Notes:…
This concept was sparked by a video shared by Joshua Bardwell some time ago. In his discussion, he mentioned the typical issue with GoPro TPU mounts on most quadcopters. They typically rely on a pressure fit, with the top screws directly…
I mounted a radiomaster DBR4 receiver on my Chimera 7 pro V2, so I had to place two more antenna on it. I decided to place them vertically on the back of the drone to avoid beeing on the same plane than the one mounted horizontally on the…
This is an all-inclusive extruder mount for the Bondtech BMG-X2 dual direct drive extruder on a Creality Ender 5. This fits the BMG-X2 model designed for the 18 mm c-c version of the E3D Chimera hotend (including the TH3D Tough clone),…
Print from TPU, zip tie on, enjoy soft landings.
Front antenna mount for iFlight Chimera 7 Pro V2. Used this for my build and the ELRS 2.4 GHz diversity receiver. Best print in TPU You need longer screws. I used M3x10 instead of the M3x6
If you're looking to mount the O4 Air Unit to the Chimera 7 Pro V2, this bottom mount is the perfect solution. Just print the STL file using TPU, insert the camera mount into the frame, and combine it with the original mount for a secure…
Tail mount for iFlight Chimera 7 frame. Includes space for DJI air unit dual RP-SMA connectors, TrueRC Bardpole, BN880 GPS, and TBS Crossfire diversity RX. Thing contains two versions, one with cutout for power to be brought topside via…
This is the Chimera Plunger Head for the latest Sillybutts blaster designs. It is compatible with the Alchemist , the Wildstyle , the Foxbat and the Battle Axe . It uses the same hardware as the plunger head of the above mentioned designs…
Chimera Pro v2 antenna mount specifically to fit the Foxeer ELRS 915/868 antenna in vertical position.
Switched over to Inav on my custom built chimera 7 pro v2. I needed a better place to mount my gps and since I don't use a gopro made a GPS holder instead of gopro mount. The mount is compatible with 25x25 Beitian BK-252q but other 25x25…
This is a 3D modela of a E3D Chimera CLONE.The clone is based on the original model and all the part dimensions shuld be the same. The project was drawn in Autodesk Inventor 2021. List of parts for E3D Chimera: -Bolt 2.8mm(length) -Bolt 4…
This mount can be used almost any iFlight Frame from 5" to 7" (like XL, DC, Cidora, Chimera, etc) with a rear standoff distance of 25mm. Print Settings Printer: Delta Rafts: No Supports: Yes Resolution: 200 Infill: 15 Filament: Any TPU…
This moves the GPS/MAG further back and up to reduce noise from the motors, since iNav autonomous flight features relies on the magnetometer. It works fine, but could probably use some refinement so I included the file in a few formats…
Description L'ensemble contient : - un organisateur de points de victoire - un conteneur de cartes machine - un conteneur de cartes assistant et de tuiles projet - un conteneur de fragments de rêve - un organisateur de pions de validation…
A mystical chimera creature, part owl, part cat, part lizard, sitting like a statue with symmetrical wings.
UPDATE!!! Its done! I semi gave up on the shroud due to printer and chimera size restrictions, but overall everything should work!. Old Update This was originally made to just be a mount setup, no holes drilled. That didn't work. So I…
It's a remix of https://www.printables.com/model/3126-demon-girls-bust-chimera by Prusa Research which is also a remix of https://www.thingiverse.com/thing:758165 by John Gosper (Kintall). Added some eye pupils and made the sculpture 20%…
Original back mount has GPS and compass really close to VTX antenas and XT60 plurg. That makes compass unusable for navigation modes in INAV. This design pushes GPS and compass further from VTX antennas removes XT60 plug, cleaning up…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
TPU Accessories for the iFlight Chimera4 Includes: ELRS antenna mount - Fits the Happymodel EP1 antenna VTX antenna mount GPS mount - Fits 18x18 GPS like M8N, BN-180
Marlin 1.1.9 for the FLSUN Cube printer Before trying to flash this firmware on your printer please make sure you use the ramps or mks gen l board on this printer with the stock drivers. This firmware is meant for the chimera version of…
I wanted to convert my chimera to iNav. In order for compass to work properly I decided to relocate my power cables and to move my gps/compass a bit further away from the electronics. So I designed this mount. Source file…
To fit the new DJI O4 Air Unit into the Chimera 7 Pro V2, I had to reposition the transmitter further forward within the quad body. This remix of Daniel Hornik's design provides easy access to the Air Unit in its new location, ensuring a…
I printed it with TPU using organic supports Fits my HGLRC M100-5883 GPS (21x21mm)
STL for XT60 cover for Chimera 7-pro. I broke mine original cover and decided to model one.
Ultimate Chimera : Super Smash Bros
A simple but effective E3D Chimera+ (air-cooled) mount for the Anet A8 and printers with a similar X axis. The Anet A8 5015 blower fan mounts on the side, and a fan duct is included that encircles both hotends. A BLTouch can be mounted on…
A Dual Direct Drive Chimera / Cyclops Extruder, made by me, C_Cheetos. Any feedback is appreciated! This is a relatively easily printable direct drive dual extruder sollution for prusa i3 style 3D printers, using 1.75 mm filament.…
Need support Printed on fine settings will be much better
Chimera Beast King, mask, cosplay, wearable, costume, face, helmet Quick 3D | Professional & Free 🚀 I keep my designs free for everyone to enjoy. If my work adds value to your day, please consider a small donation. ☕ Support here:…
If you like the design please support my work. Even a small tip of 1$ helps. Thank you. paypal.me/GuyWithDrones DJI antenna holder for Iflight Chimera 7 frame. Snaps into the original 3D print for GPS unit.
Hey, I am currently upgrading my printer to a chimera+. I don't like the stock 30mm fan, so I want to replace it. I designed 2 adaptors to use ether a 40mm fan (see my other designs) or a 5015 blower. The mount replaces the original 30mm…
TPU printed holder for the RunCam Split 4k. It hlds the Camera and the Board. other Split style cam's could also work. I designed it for the Split 4k. the board is just held in the TPU no Screws needed. the Cam gets mounted normal with…
I shared just hotend related parts. If you want extruder/bowden, face and the other parts you can find on voron website and printables. You must use petg or abs. Don't use pla. Notes: If Your Bltouch probe is shorter than desired length.…
~This uses a the GoPro case made by Pokey (?). If anyone knows where the link to the original material is, please let me know so I can give proper credit where it is due~ This mount should work with any somewhat modern iFlight Chimera 7,…
This my desing of a mount for the O3 unit on the Chimera 7 PRO (v1) hole is 5.3mm and 35mm btween the holes I USE M2 6mm screw see how to print in the photos . enjoy and have fun to remix . when you do support change the xy distance in…
This vertical antenna mount was designed based on the iFlight Chimera 7 vertical antenna mount. This antenna mount can be used on any quad though as it mounts to the quad sitting on your top plate and being screwed down with a top plate…
No Supports Print Settings Printer: Bluer Two Trees Rafts: Yes Supports: No Resolution: 0.2 Infill: 20 Filament: my3D PETG, ABS Black Category: 3D Printer Extruders
Just to have fun and use a GoPro style mount cameras on the Chimera 4... Category: Hobby
Print with good quality TPU without supports. I personally add supports manually, to improve the print quality Fits for Foxeer M10Q-180 GPS and any generic buzzer. I have tried with a few no-name buzzers, but I usually use ViFly Finder V2
DD for Two Trees Bluer Print Settings Printer: Bluer Two Trees Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: my3D PETG Category: 3D Printer Parts
Audio Log – Dr. Aris Thorne (Lead Geneticist) : (Breathless, a metallic scraping and an unnatural, wet sobbing sound can be heard in the background) "They lied to us! They told us we were curing cancer. We were supposed to adapt human DNA…
Blowing under the long throat !!! Supports only under 2 item. The radiator mount is screwed onto the factory M3 screws, the coolers are also fastened to the factory screws, you need 4 M3 15mm screws to fix the parts with the fans Infill -…
Need support Print as fine as you can to get best result
Also see Front mount for BLTouch: https://www.thingiverse.com/thing:2070920 What is this? The WhistleBlower is a compact , small and light x-carriage for Prusa i3 with an integrated mount for E3D Chimera or Cyclops dual head Disclaimer…
https://www.reddit.com/r/Nerf/comments/1cz7ypo/chimera_mk7_with_a_lynxtype_catch/ This is not an exhaustive set of instructions and should be used in conjunction with the Chimera mk7 Build Guide, Printing Guide and common sense. McMaster…
Chimera 7 (Analog) Kamera halterung für DJI O3 Air Unit
Instructions: To optimise for FDM printing, all fin files are a half cross section perpendicular to the z-axis. Pre-Process: Ensure filament is UV and water-resistant. Process: Mirror along the x-axis within the slicer before printing the…
My attempt to create a Chimera for RPGs. You may need to rescale this model to fit your RPG needs.
I liked the original model, but it did not fit the GPS I use. The model is made from scratch, but I got dimensions from the original author and modified them a little.
Need support Fine print will make it much better
This is a modified version of boohucky's " E3D Chimera 40mm Fan Adapter " that uses the two top M3 holes on the Chimera heatsink instead because I didnt have the proper self tapping M3 screws that are used on the front like the original…
Chimera Bust is a detailed 3D printable statue inspired by the legendary Chimera , one of the most iconic monsters of Greek mythology. The model features the Chimera’s hybrid composition with a roaring lion head , a goat head and a…
This is an organizer for the boardgame Chimera Station. It fits into the open slots in the stock cardboard inlay and supports sleeved cards, I also put the empty punchboards underneath so the lid closes flush. None of the boxes is longer…
A myth-inspired hybrid beast with a savage, monstrous look made for dark fantasy scenes. It works perfectly as a tabletop enemy, dungeon boss, or display creature.
I am designing a chimera+ mount for my creality cr-10. With this part you can replace the 30mm stock fan with a 40mm one. I will publish another design for a chimera+ mount. I printed this thing with 20% infill and with support only…
The original mount that I designed worked well, but I didn't like the cooling solution that I was using. I've modified the design to allow two 5015 blower fans to be used on each side. The improved cooling makes a huge difference. You'll…
Here's a set of point tokens for the 3-player card game Chimera. Instead of writing down scores, you can now reward players with tokens. If you put each player's gained tokens in a container, you can really hide the points from the other…
Adapter to use 40mm fans on the E3D Chimera. The 30mm 24V fan that came with chimera lasted 3 days before starting to vibrate and sound like a lawnmower. 40mm 24V fans are easier to get. 4x 10mm M3 4x 15mm M3 PETG 0.1 mm layer height.…
The new DJI O4 Air Unit comes with a relatively short cable, making it challenging to mount on the Chimera 7 Pro V2. This extension block solves that problem by allowing you to attach it to the original mount while securely fastening the…
Back to weird old art but this time a bit later and much better art. This piece is based on this drawing by Jacopo Ligozzi drawn some time between 1590 and 1610 . I would like to see how this prints on a decent printer as my Anet A8 can't…
Need a lots of support Very fine print will look much better
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP --- This model depicts the Chimera, the fearsome hybrid of…
This is a victory point tracker for the boardgame Chimera Station. I did not like the tiny cardboard chits to track the points in the game so I decided to make them a little bit more visible on the board. The tolerances are quite small so…
I modified eva3 to fit the hotend from tevo tarantula. This is the super old tevo tarantula. The heatsink doesn't fit the eva3 mount so I had to mod it to make room for it. I don't have cover installed so I don't know if it fits the…
Remixed the original file to include a few changes: Slots for m3 nuts (use a soldering iron to sink them) Hole allowing access to the adjusment screw on top of the BLTouch sensor Hole allowing the BLTouch cables to go through the back…
I ran across a Chimera clone for a very low price and decided to try it out. I have found that the mixing nozzle doesn't mix well for PLA filaments but does work well with translucent PETG filaments. For the times that I want to print…
GPS holder for a GPS like the GOKU GM10 PRO V3 for the Chimera7 Pro V2 flight frame. Print in TPU, no supports need.
******* An updated ver will be added in next few days ******* Changes will be made to top part only, with thicker motor mount and added hinged mount for a 40mm motor cooling fan with block supports. Direct Drive Chimera or Cyclops mount…
Compatible bowden setup http://www.thingiverse.com/thing:800415 BOM: E3D Chimera/Cyclops Hotend http://e3d-online.com/Multi-Extrusion/Chimera Fan http://e3d-online.com/Electrical/Fans/50x50x15mm-12v-DC-Side-Blow-Fan X-Carriage:…
Born from ancient legend, this Mythic Chimera statue combines three fearsome creatures into one commanding hybrid beast. At its centre stands a powerful lion with a flowing mane and piercing gaze, flanked by two horned ram heads rising…
This is an additional tool head to be used with the Hypercube EVO NGEN from Nedalive. This will allow to use a dual extruder chimera on the printer, allowing to print dual color/dual material. Design have been tested already, but this is…
Summary: Part to replace the 30mm fan which is used to cool the chimera heatsink with a 5015 blower and a part cooling fan mounted at the same time. I am designing a chimera+ mount for my creality cr-10. With this part you can replace the…
Holder_Chimera_dzino2020v1, Inductive sonda M8
This is a screw-on bracket for the D-bot print carriage for the E3D Chimera hot end. There is another option on here, but it replaces the entire front plate of the carriage, and I wanted to be able to more easily remove it without having…
Update 10.Jan.16 added 2 new mounts for 18mm Sensors: --> "18mm Sensor.stl" --> "18mm Sensor screw.stl" ############################################## a few simple mounts for a sensor 12mm diameter. there are 3 different kinds (one for…