1,824 models
I liked this command strip mount for the honeycomb wall , but I prefer that the command strips be mounted to the side of the wall (vertical) rather than the top (horizontal). Also, I use 4 wall segments in a grid, and needed a double…
A remixed version of user @ianfolds double hook designed to work with the 3m command strip backing for direct attachment. Prints with PLA and no supports. gcode file from prusaslicer for a prusa mini+ and PLA included.
UPDATE: New Card Stack uploaded (Update Card Stack closed) . Now little bit higher and closed walls on both sides. Updated Card Stack printed without support and much faster Finally i build a Card Tray that fits my needs. It holds up to…
EN : My girlfriend and me gonna search a tissue box with 2 compartments for our TV remote but never find the desired one, I made it myself this model to store different remote standing up to have an easiest way to catch it and to limit…
A friend wanted to create this hilarious deckbox , but he couldn't find a food can with the required dimensions. So 3D printing saved the day! This deckbox is specifically designed to the dimensions of the label from the reddit post. It…
A Parametric, Vase-Mode Deck Box! This parametric deck box has been designed to hold a full 100 card MTG commander deck. Some key parameters for you to play with include: Card Width Card Length Deck Thickness Box Wall Thickness Card…
This is a storage solution for the classic wargame Command and Colors Napoleonics from GMT games . As the game has three different piece sizes, I have divided them in three trays: Infantry : 180 pieces Cavalry : 77 pieces Artillery and…
Tame That Under-Desk Mess This simple cable organizer can be affixed under a desk or table using small-sized 3M Command Strips. Print as many or as few as you need, and organize your cables without screws or damaging adhesive. Prints…
Hey there, because i wasn't easily able to get the magnets Bmorr used, i remixed the design to use more standard round 5x2mm magnets. Yes, you can see them when the box is open. Yes, it will not be as strong as the original, but i can…
Basic way to hang a Heewing T1 Ranger on a wall, rests on the horizontal stabilizer, and uses a Command strip to attach securely to the wall without any damage. Included in the photos is the intended strip. Recommend printing at higher…
Little Green Army Women : Mortar Platoon Commander : The Witch or Vidma of Bahkmut.
Support de télécommande tournant sur 360° Ce projet comporte 3 fichiers. Base.3mf Entretoise.3mf Bac.3mf le fichier support télécommande complet , regroupe tous les fichiers. Disposition sur la plaque d'impression: Paramètres d'impression…
Modified to work with the picture hanging Velcro Command strips. *Warning don't use with non-Velcro strips
Small hook adaptor for Ikea(or similar) picture frames. I made this one specifically for Ribba Ikea frame and the Command 450g hook. Has a small tab to keep it on the frame while hanging it on the wall. Will update if I run into a…
We needed a convenient way to store reusable shopping bags in the kitchen. I found a great model by Rixon Redd on Printables and modified it to be mounted with a 3M Command Indoor Picture Hanging Strips (Large) Pairs.
Feeling a little nostalgic over your former military career? For those of you that served at AFSOUTH/Allied Joint Command in Naples, Italy this might interest you.
This model is a command zone box in which you can place you commander as well as slide in trays underneath to slide out and use Spindown sized dice. The file includes 3 trays although only two will fit in the model at one time. See…
Printed in PLA, 0.40 mm nozzle and 0.20 mm layer on Prusa MK4S, in upright position with support.
Designed for my 1974 Norton commando 850 MK2a. Should fit on all Commandos 750 and 850. Screws on and off by hand. In case it‘s heavy to losen, the handle fits a 1/2“ wrench or there is a hole for a Tommy bar. Prints without support.…
FR: Porte pile de remplacement pour barre de son PHILIPS: HTL2160 HTL2101A HTL2111A et autre, de la même forme. EN: Replacement battery holder for PHILIPS soundbar: HTL2160 HTL2101A HTL2111A and others, of the same shape.
Designed for my 1974 Norton commando 850 MK2a. Should fit on all Commandos 750 and 850. Prints without support. 0,15mm structural. Remove before starting the engine. Bear in mind that PETG looses its shape resistance around 65°C to 75°C…
Designed for my 1974 Norton commando 850 MK2a. The cover holds in place by the original oil junction block bolt (Andover Norton part-no: 03.0448). Should fit on all Commandos 750 and 850. Prints without support. 0,15mm structural. Remove…
I was thinking of this lil gadget from the Bill Hodges/Holly Gibney series of books by Stephen King the other day and thought why not. The Zappit Commander is produced by Zappit Inc. owned by the now bankrupt Sunshine Solutions. The…
While overhauling the engine on the bench it's necessary to turn the engine. The length is designed that the rotor nut gives tension to the hextube so the slot for the Woodruff key does not take the load alone. I made two versions: Heavy…
MTG Commander Deck Box 100+ sleeved cards. Default inner dimensions are: width 70, depth 65, height 93 mm but all can be adjusted. Parametrized Fusion360 file for easy adjustment included. MTG deck box for 100+ sleeved cards. Heavily…
Stackable deck boxes for Magic the Gathering, including: Commander deck box with a window to display your decks commander (or another card of your choice. Space for 100 card deck and 25 card side-deck (with sleeves) Standard deck box with…
Build instructions are identical to the original Rugged Box using same hardware. -Insert M3 bolts through bigger holes(outer) and thread into smaller holes(inner). -Latches are a single object. Use cut tool in slicer to separate them and…
Update There is a bigger version of this box with adjusted tolerances now! (As many comments suggested) You will get the more spacious version if you print every stl with a "+". I'd recommend printing the + version if you intend to double…
3D Files for a 1:12 and 1:48 scale version of a Republic Commando! This is 1 pose of a 10 pose set. If you like my work and wish to support me or get other poses, check out my Patreon here: https://patreon.com/galacticarmory
A deck box based on a design that I saw a few years ago but could never find it again. It's a simple deck box with no extra parts required and with the dovetail style lid, no disgusting plastic on plastic noise other deck boxes have.…
I made this model, because i couldnt find any deckbox that fits all my needs, and thought id share it with you all. It holds 100+ sealable doublesleeved cards, with a seperate room for tokens, i believe itll hold about 20 sleeved tokens.…
I loved the original dog tag so made a variation on the theme using the Hell Commander rank badge. Printed on a Bambu Lab P1S with the 0.08mm extra fine setting, iron top layers.
This wall mount was designed around three main criteria: Completely hide a large 3M strip Allow the user to use the camera and home button even with a case that accommodates the apple pencil Allow the print to be made without supports I…
Step up your game with these visually enhanced deck cases, a creative remix of an existing design loved by TCG players. While the original functionality remains untouched, capable of holding over 100 sleeved cards with ease, it's the…
This is a remix of Gimpel's awesome expanding deck box with an unlocking movement. A slight twist of the top makes the six locking mechanisms slide out and release it. While I was building two of these, I made at least small tweaks to…
It has been bought to my attention the helmet was done by Dan Inskip over at the MiniFactory. For those of you wanting to print the helmet complete on say a CR10. head on over to the link below and give thanks to Dan for his great work.…
The deck box I remixed from is fantastic, but there were a few things I wasn't happy with. I also wanted to be able to fit the life counter inside the box. IMPORTANT: If you want to use magnets in the life counter, you need to set…
It holds 120+ standard-sized double-sleeved trading cards (i.e. Magic the Gathering or Pokemon) and includes dividers and an optional TPU seal. I seized the box based on Dragon Shield sleeves. No support or brimm required. Requires 6…
FEATURES Besides the eye-catching locking mechanism, there are also further features, wich make this deck box unique. There are two storage compartments for small dice or tokens . And the door also acts as command zone . Just slide your…
These are USB cable organizers designed to be wall mounted, either using #8 screws, 3M Command Strips or double sided tape. The 6 place cable holder has 4 places for thicker cables (5mm openings) and 2 for smaller ones (4mm openings). The…
The original Fidget Toggle Switch by kriswillcode is very satisfying to use as well as being easy to print. But as soon as I saw it I wanted it to have one of those red safety covers, the sort of thing you see in movies when people are…
Do you like trash? Do you like raccoons? Do you want to feel like a trash panda when you pull out your deck? Then this is the deck box for you! Inspired by the raccoons of Bloomburrow, I designed this deck box for my wife and built her a…
This is my 1911 model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. You could scale it down for GI Joe if you wanted or make it full-scale for a costume or…
Keyboard Wall Mount Hooks designed to be used with 3M Large Command Strips. Each design has a small lip around the command strip above and to the outside. Works great. Print instructions Printed on Prusa Mini with 0.2mm layer height and…
Saw a Commander Deck box posted to http://www.reddit.com/r/3DPrinting , but the original user deleted the post. Thus I took it upon myself to recreate it from scratch and adding in some neat things while I was at it. This is a deck holder…
This is my take on @Collingall 's version of the "Rugged Box (Parametric). Thanks for sharing the files - give them a like too: A slim and elegant deck box for Magic: The Gathering cards (or any other TCG with the same format). Fits…
Navy Riverine Command Boat or RCB for short. This was used by the Navy as a Coastal and River combat craft
About DJI Neo Adventure Command Center Introducing the DJI Neo Adventure Command Center : a rugged, all-in-one transport solution engineered for drone pilots who refuse to compromise. This shockproof transport vault not only houses your…
Created this deckbox to fit a 100 card sleeved commander deck, as well as 15 unsleeved tokens and a life counter. The walls are definitely thicker than they need to be, but as this was going in a backpack, I wanted to make it sturdy
Hi Darknight, this took many hours to complete because I've shifted premis and where we I am now the internet is dreadfull. Once finished these files were over 100mb + each and of course on damn near dial up speed, it was practically…
If you're anything like me you bought a few wall hooks, used them once, and don't know what to do with all of the extra adhesive strips. This wall hook is designed to fit the small 3M Command strips and hide the pull tabs like the…
Are your headphones sitting on the floor right now? Are they cluttering up your desk? Do you have too many headphones and don't know where to put them all? No more shall your headphones be treated with such disrespect! Treat them right…
Stackable deck box for Magic the Gathering. Commander deck box with a window to display your decks commander (or another card of your choice. Space for 100 card deck and 25 card side-deck (with sleeves) Dice-tray base that can hold dice,…
MTG Commander Box remixed from Ultimate Card Box v4, added commander card window, changed sizing to work best with single sleeved precons and added pins for non-magnetic mount. V4 alt: alternative hinge design that doesn't require any…
Based on the Rugged Parametric Box by Whity, i tweaked it to fit a sleeved 100 card commander deck (plus tokens). Split in half the cards fit nicely into each half and the commander can be in a top loader in the front "window". Requires…
Background: I didn't want to damage my wall installing the honeycomb storage wall system, so I looked into command strips. I took one I liked and remixed it. What I like about original mount I remixed from: attaches from the back (the…
Generic Medieval Knight Cavalry Command for 1:72 wargaming Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 mm Filament: Creality PLA Category: Games
If you like this model and it's not too much trouble, please hit the ❤ button - it helps out a lot 😀 This is an EDH/Commander tray. If you want something a bit smaller, check out the Compact Commander Tray ! This EDH tray can hold the…
Gyomeland M53R, a custom Magic: the Gathering Commander sized deck box. Inspired by the industrial kitchen ranges sold by Garland, this new and improved design features: Improved Oven Door, securing your 100 card Commander deck within.…
This deckbox is made of three main parts, which assemble by using 16 neodym magnets (6*3mm). UPDATE : Added some additional parts (window, top and front text panels), which can be glued (otherwise, you can try to paint the white parts of…
Commander Deck Box for Magic: The Gathering. On the front side you can insert an Art Card from the new boosters to customise the box (as in the previously published model for the normal deck). Alternatively, you can insert your commander…
I made this double-stack slim deckbox because I found standard single-stack deckboxes to be too bulky and wouldn't fit in my bag (this also happens to fit in larger pockets). I've also seen very little love for the art cards that…
Slides into an empty honeycomb cell from behind. Fits the “X-Large” size of command strips. Prints without support, obviously.
this is a dummy 13 Gregor
I've tidied up this helmet and smoothed it where possible. I've added the extra ear piece and if you sand the nose a little, remove the visor and or change the mohawks around you could theretically change it to any model Clone Trooper you…
This deckbox is for EDH/Commander Magic the Gathering decks and can hold 100 double sleeved cards plus some extra. It has a slot for a thick toploader sleeve in the front. Best way to open it is to push the top forward from behind, see…
Print with the back of the model on the build plate. I used supports on the strip cavity only. I printed with natural ASA, but any material should be fine. I included the .step and .f3d files in case you want to modify the hook for…
Dart holder for upper tactical rail on Elite 2.0 Commander. Might fit other models also, I designed and tested it on the mentioned model only. Držák šipek pro horní taktickou lištu na Elite 2.0 Commander.Může pasovat i na jiné modely,…
This is a simple toothbrush holder that holds 6 toothbrushes and some toothpaste. It can be lifted off for cleaning. I mount it to the wall with the large hook command strips. I print the main holder standing up with no support. I print…
Simple 3M command hook. Small and medium sizes for the small and medium sized command strips. Any material can be used. PETG recommended due to increased toughness No supports needed Category: Household
The legions of Rome often have their strength and skill at arms attributed to their iron discipline and cohesion as a unit. This is true but it is only so due to the officers the form the head and mind of the legion. Centurions are the…
29. Dec. 2023 Improved the hand for easier printing Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Get your Dummy 13 here: /model/593185 DUMMY 13 loves COMIC CON!…
Originally hosted at https://www.thingiverse.com/thing:5754524 by myself. This is a deck box for trading card games. It was designed specifically for the Commander format of Magic the Gathering. It fits 100 cards with a little room for…
The current logo of the former Washington Redskins / Football Team and now the Washington Commanders
This two-part shell-style deck box is designed to keep your MTG Commander deck safe and organized. It fits 100 double-sleeved cards , plus a token compartment , making it perfect for EDH players who want a reliable and functional storage…
This is a modified version of the original deck box to fit Ultra Pro 3" x 4" top loader card protector for the commander card and slightly increased in size to accommodate Dragon Shield Matte sleeves for the rest of the deck. The…
These printable enlisted ranks can fit at 100% scale on an Ender 3. Although the E-9 ranks are rather large, changing the angle can help it fit if doing it at 100% scale (See Pictures). The thickness for all these chevrons are at 7 mm and…
This is the PLA commander. i have a reg and am working on a heavy soldier, sniper/specialist soldier and a scout if you have any more cool guys you would like me to make tell me and i will look into your idea!
A MTG deckbox capable of holding up to 8x 100 card commander decks (sleeved). The last two slots are also designed to hold accessories for play (i.e. tokens, spindowns, dice, etc.). The model consists of two parts a lid and the body. The…
A fairly basic MTG Commander deckbox, featuring: A twist-lock top, turning the MTG logo will open the grippers, allowing the lid to be removed. The grippers close automatically thanks to the spring. Nicely fits 100 sleeved MTG cards…
Use alongside Insert-Empty. Mount is a little bit longer to allow the storage to protrude from the wall although I may make a shorter version at some point. printed using PLA
I made this to replace broken hooks from 3M command. I print with supports for the rounded tip at 20 percent infill in its side. remove the support. apply the adhesive strip and then apply to your wall, cabinet, dresser, whatever.
Overview This Philips Sonicare toothbrush holder is designed to allow toothbrush insertion from the top or side. This holder allows toothbrushes to be more easily stored higher on walls, far out of reach from splashing sink water, etc.…
Created as a secondary stand imitating StarGate Command, for the incredible Kristian's Stargate: https://thestargateproject.com/ Demo: https://www.youtube.com/watch?v=SJy8u8dllmY&t=84s including ZPM as Chevron 8 The ramp needs M2.5x12mm…
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
a clone of the original wall hangers from tessa but in a 3d print friendly design.
Hey folks, This is a repaired and remeshed version of Panderazo's DC-15s pistol. I've made the following modifications: Joined small triangles Englarged the inside diameter of the barrel and made it 190mm deep to fix the mesh clipping…
remixed from some files here and some files from Gmod. printed and painted photo by TKmadeCustoms One version has embossed vents/stripes just encase you prefer to paint them instead of decals. Feel free to use/modify/sell prints along as…
Hi all, I'm just starting out with my 3D printer and this is my first contribution to Prusaprinters! I've really enjoyed printing the parts from here and learned a lot from you all, so I thought I'd add something I think is useful for the…
osVAC conversion adapters for Dust Commander cyclone dust separator. With these adapters you can attach osVAC hoses directly to the Dust Commander. Also check out my osVAC pressure relief valve adapter. The female connector uses my osVAC…
This counter helps a lot when playing Magic the Gathering COMMANDER variant. It is made for D20 dice to keep track of your neccessary values in the game. Of course you can change the dice colors matching your own preferences. We choosed…
This model fits a small command strip, I originally designed it to hand a shower curtain from, so it also fits those holes.
Landscape mount for HSW environment. Two choices, one for standard single use command strips and one for use of velcro command strips . Thanks to Spatula for the inspiration.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
The IKEA RIBBA frames included wall mounting hardware is about 1 inch deep set into the back of the frame, making traditional hanging with a screw difficult. To make it easier to mount IKEA RIBBA frames, and by extension, canvas prints, I…
Designed to be printed on narrow side for strength! This makes hanging picture, photo, or poster frames with toothed hangers on the back incredibly simple. Pictured is version 1. Version 2, the STL version I've shared, slightly lengthens…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Literally just a space marine group i found on thingiverse and i added bases. please make and comment.
![MTG Commander Box [v4]](https://media.printables.com/media/prints/763363/images/7385852_1280f58f-c9b3-4784-817b-a23507d46db4_b0e39541-7345-41a5-abb9-10860e449896/img_20240808_095036.jpg)
