88 models
i made a hanger/holder for my dewalt DCS391 circular saw it has 15% infill and 4 perimeters just retract the blade up as high as it goes and place it in the hanger whilst pulling the guard back
I designed this enclosure to mount it to my MechaPlus ProBasic 06-05 CNC Router . But it can be used for any CNC Machine. I deliberately left out the Stepper drivers which are in a separate enclosure that came with the machine. It is…
These are some simple feet risers to rise your Candy EGO-G25DCS microwave oven. Print instructions Material PLA Resolution 150 Supports No Brim No
This is a basic wall mount for a DeWalt jigsaw (DCS331). Its designed to be quite snug so that the tool doesn't slid out if you want to mount it under a shelf. I printed it with 6 perimeters and %40 infill as I wasn't sure how strong it…
Wallmount for DeWalt DCS356 Oscillating tool
Wanted an easy way to mount my Dewalt 6.5" circular saw in my garage. I designed a two piece mount that the tool slides in and out of easily. Screw the two pieces into the wall with a 10" gap between them. Slide the top of the plate of…
Wallmount designed for DeWalt DCS334 Jigsaw v2 - updated to improve fit with protective plastic cover on base
I created this to keep my DCST922 string trimmer up on the wall. It can be hung with the trimmer folded, facing either direction. The screw holes accept #9 pan head screws, or pretty much any similar size wood screw. I printed mine with…
This model allows you to hide your Dell Dock under the table to create a clean workspace. I designed it for Dell WD19DCS but it should fit any similar Docking Station with 90mm depth and 29mm height. It is not flush with the table, in…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
My first collapsible sword and I hope you like it, no fancy settings needed to print this but made sure your printer is dialled in for the blade. Printed with .4 nozzle / .2 layer height & default 2 walls. 15% infill should be plenty.…
Turn your dewalt 20v saw into a track saw with this sled. Works with tracks compatible with makita track saw. I use mine with a powertec 71387 track. Glides nicely. Printed in PETG. Screw 2 M6x35 screws in from the bottom of the track.…
A small item to keep the guard of your circular saw open without having to modify it.
Edit: 30Oct20 - Found a great monitor/screen for this MFD (since it's bigger than the TM Cougar MFD's) cheap and minimum wasted viewing area https://www.aliexpress.com/item/32325920866.html?spm=a2g0s.9042311.0.0.5c074c4dyytB9m Edited:…
These are simple brackets that fit over the feet on the DeWalt DWE7485 / DCS7485. They allow you to easily & securely mount the saw in place as I found the original mounting holes to be very awkward as they are at an angle. Are a ver good…
This is a multiboard holder for the Dewalt DCS355 oscillating tool. This is a remix of the drill holder for multiboard by @andrepadua, which is a really nice sturdy drill holder I use for my Dewalt drill and impact driver. I wanted to…
The Kreg Accu-Cut comes with a saw sled that does not grip the DeWalt DCS565 tight enough. With this print, the it's no longer wobbeling. Designed to align perfectly on the blue guide strip of the Accu-Cut (as the manual suggest, the…
Simple wall holder
I modified my earlier version to more closely resemble my other DeWalt wall mounts. The screw holes accept #9 pan head screws, or pretty much any similar size wood screw. I printed mine with PLA @ 20% infill, and using Prusa Slicers…
This is a niche use case, but maybe someone will find it useful like me for combining two excellent tools to easily and accurately cut shapes from 6 and 12mm MDF. Guide is a two part clamped adapter that fits around the DCS571 base to…
Other mounting solutions I found did not fit mine. Probably Dell changes dimensions frequently. Better measure dimensions of your docking station before printing this. 😉
Simple designed plug for the hole on the side of the track saw. It was designed for TPU, but should snap in if it was printed in a rigid filament (has not been tested). Let me know how you like it!
Work In Progress, F-16C Block 50, ICP (UFC for us old school DCS peeps) All buttons fit best @ 97% scale, though some are slightly loose Text on buttons is too small for a 0.04mm print head Added 2 backplates, "Thicker" version worked…
These keycaps are clones of DCS style 4 row keycaps. Each row type has a marking in the bottom making it easier to see which one it is (see photos). In prusa slicer I recommend turning on seam position to the rear (under layers and…
Mounts your DeWalt DCS371 to the wall. Might work for other bandsaws, please comment your part numbers if you try. Includes FreeCAD source and STL/STEP exports. Recommend printing with at least 3 perimeters for strength. Suggest printing…
To mount this you'll need both T-Nuts and alignment guides, both can be found here: https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb
Desktop case to house DDCS V3.1 CNC controller Prints as 2 parts, glue together. Optional cable grip. Very sturdy in normal PLA.
The DDCS V4.1 comes with four holes in side to mount it into the panel. I just needed a box to hang off the side of my mill while putting the rest of electronics under the mill. There is a drawing provided if you need to modify it. Parts…
This insert by archeopterix on Thingiverse is great and fits perfectly. I only added some extra body where the tabs were added and would end up needing supports anyway. I printed in PETG with 0.4mm layers on a 0.6mm nozzle. Add supports…
This is for the Keyboard contest entry. The file is unchanged from my original, simply making another entry for submission date. These keycaps are clones of DCS style 4 row keycaps. Each row type has a marking in the bottom making it…
Bottom plate for the Dewalt Jigsaw. DCS 335 or DCS334 compatible. I had two DCS335 with one of them missing the bottom plate. Made a spare one in ASA. This one installs with a single M8 bolt and nut. The angle can be adjusted to 0 or 45…
A zero clearance plate for my DeWalt jigsaw, keeps the sawblade from bending to much.
This adapter is for the Festool Cleantec D27 dust collector hose to the Dewalt DCS571 Atomic Circular saw. Pretty straightforward, I tried to keep it compact and close to the original. I'll post adjustments if I make any. Fusion 360 file…
Dewalt DCST922 Strap mount Add a shoulder strap to your Dewalt string trimmer ABS .2 Layer height 100% Infill Supports required on part 1 Hardware: 4 - M5 x 20mm cap head screws 4 - M5 x Flat washers 4 - M5 Threaded heat set inserts If…
Simple Multiboard attachment for the DeWalt Jigsaw DCS331. Features: 3 x Printed Bolts included! DeWalt Colored Logo (Use glue to set it)
This takes a great jigsaw mount for the Dewalt DCS334B and makes it work with the 3D printable WallControl brackets from https://github.com/aderusha/DDD-Printable-Wall-Control-System To print and attach this, you'll need: One 4x Flat…
Dewalt DCS391 Karcher adapter that fit with the body of the saw. I made it for myself. I thought it could interest someone else :) This is the V2, the first version was too noisy.
I may be a little late to the party since MTH has (or will soon) discontinue the DCS Remote. But there are millions(?) of them out there so here is a holder for the remote so you don't have to set it on the layout (oh my - a mortal sin).…
This replaces the very small thumb-tab used to manually retract the blade guard with a more ergonomic, and safer position away from the blade itself, allowing you to transition from holding the blade guard to the handle on top of the tool…
Terminal plat to accommodate bigger Ø7mm binding post
My dock was taking up space on my desk and managing cables was becomming a pain so I mounted it to the wall along with my Jabra Speaker. Printed with .2mm layers, 3 walls, 15% cubic infill in PLA on a BambuLab A1 Mini. 5mm Brim and tree…
An adapter for the Dewalt DCS565 20-Volt MAX 6-½" circular saw dust collector to connect to any 1-7/8 inch shop vac hose! I couldn't seem to find this adapter anywhere else and didn't want to sink the money into getting the Dewalt adapter…
Wall hanger for Dewalt DCS397 compact reciprocating saw.
Inspired by a device made by Reddit user Few_Significance_829 this handy little attachment for your DeWalt DCS577 Flexvolt Circular Saw re-directs the dust expelled from the exhaust port on the blade guard to the front instead of the back…
It works quite well. Print it in PLA with at least 50 percent infill.
Ford Maverick Sub Adapter Plate for Dayton Audio DCS165-4. Mounting hole is shifted for a bit better fit from original model. It has holes for 5mm brass inserts. This requires cutting of the short leg of the support on the left side of…
A clip that will slide onto your Digitrax DCS 240 or DB 220 to keep your cables nice and organized. Will hold the three cables coming out the front of your booster. (I'm not sure if it will fit the older Digitrax boosters - I think they…
Got a Black & Decker BDCS40BI cordless drill/screwdriver for Father's Day and it came with six bits but can only hold ONE extra bit! What's up with that? Thanks to a little time in OpenSCAD I've corrected this flaw. This bit holder is…
I originally had an old phone mounted on a similar mount, but it was using some freeware, that had not so great quality. So i found the DCS-6100LH for ~9€, and it gives me 1080p, can reccomend for the price.…
WIP - Creating better face plate Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Category: DIY
These are press-fit replacements for the clear plastic pieces that fit into the aluminum extrusions at the back of some Fisher & Paykel manufactured (including DCS branded) fridges' shelves. They are equivalents to Fisher & Paykel part…
This gauge supports precise routing of the jig saw by displaying the cutting line for DeWalt DCS 331 and 335. Just slide the gauge beside a router (e.g. a 3030 aluminium extrusion) and it will show we're the saw will do it's job. In case…
Adapter for the DCS565 to a rigid shopvac 2.5" hose. Heavily inspired by https://www.printables.com/model/663323-dewalt-dwe6421dwe6423-to-rigid-nxt-shop-vac-adapte for the Rigid mount shape and design.
Same deal as original but trimmed and re-parted to fit 180mm printers such as the A1 Mini.
Mount your Dell WD19 laptop dock securely to the IKEA Jerker desk frame. I based this on SirJoga's Thingiverse post (https://www.thingiverse.com/thing:4877019) though in the end I made it up from scratch with my own measurements as a base…
Jebao (or Jecod) DSC-1200 pump is great replacement for Sicce pump provided by Red Sea. Its cheaper to buy it in case if stock one fails and its a 24V DC pump with variable speed controller which is an added benefit. It is a bit bigger…
Printed with PETG .2 mm layer height with tree supports auto to support the horizontal sections. After printing I realized that I could have printed it with the "make overhangs printable to increase strength and reduce waste.
Camera surface mount for D-Link DCS-6500LHV2 security camera . Requires an 11 mm standard tripod mount screw with a 3.5 x 5mm head – See attached screw photo. Clearance is such that the rubber feet on the camera hold it in place on the…
Because im using the subwoofer as part of 2.1 system where its standing vertical i had to move the hole for the terminal plate to the side of the housing. Ive also made a remix of the terminal plate for bigger binding post, see my other…
Broken plastic screw collar replacement. Printed off of "Dlink 932 Modular Camera Mount" (found here: https://www.thingiverse.com/thing:3535948 ) Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports:…
Diamond Circle Square geometry check. Three different forms in one piece, to verify the geometry of the X and Y Axis. Axis length X/Y squareness circularity test First layer hight Hole accuracy Speed : 60/mm s Infill : 10 % Layer : 0.2 mm…
Link to the base STL, STEP, and F3D files available for easy editing AFCS Panel printed in one piece with options to print in two for a hidden nut on the switch If printed in two pieces use M5*12mm button head screws to hold together…
Cornerbracket for D-link surveillance camera DCS-8635LH and a "lid" for the lower part of the camera.
Wall mount holder for MTH DCS Remote for O-Gauge Model Railroad, with optional AAA battery holder companion. I used 1" drywall screws to attach to layout fascia. Print Settings Printer: Sindoh 3Dwox Rafts: No Supports: No Resolution: 0.2…
Contains STL, STEP, and F3D files for easy editing Racks are held together and panels are mounted with M5*25 socket head screws and M5 nuts Links to the panels: AFCS
Camera mount for prusa and d-link dcs 932l
DeWalt Jigsaw Hook for Multiboard (DCS334 / DCS335) A simple hook that clips onto the Multiboard and holds a DeWalt 20V MAX brushless jigsaw by the shoe. Works with both the DCS334 (D-handle) and the DCS335 (barrel grip) since they share…
We designed this adapter to connect the dust extraction port of a DeWalt DCS7485 table saw to a Parkside PASA 1200 B2 workshop vacuum . The included STL is ready to print using the dimensions that worked for our setup. We are also…
Printed on Prusa core one L standing up.
you will need a Ni-MH/Ni-Cd battery charger, there are plenty cheap ones for RC cars. You will also need 2 uninsulated male spade connectors (standard size, roughly 6.3mm wide), hot glue or preferably epoxy to hold it in place, and wiring…
My Twin DCS garage remote control broke, and after searching online, I couldn’t find any existing STL model to replace the broken part. I decided to design my own model from scratch using FreeCAD. Design The model was fully created in…
A case designed to be used with the interface board for the DB25 connector for DDCSV 3.1 CNC Controller. To make more user-friendly. It's made of the three parts, a top, bot and a spacer. There is a image explaining how to mount and what…
The mount screws on to the removable gantry wheel on the left side. Requires: 1x M6x20 bolt (any will work, just pick one up from Home Depot/Bunnings) Make sure you don't overtighten the two M3 screws! The mount is fragile and will break.…
DeWalt DCS373B Wall Mount – Print Info & Notes I designed/printed a wall-mounted holder for the DeWalt DCS373B 5-1/2" 20V Metal Cutting Saw and wanted to share the print details for anyone interested. Print Settings Used: Walls: 3 outer…
Filament : PLA Nozzle : 0.4 Layer : 0.2 Support : Organic / Intelligent
D-Link DCS-8000LHV2 Camera Mount for Bambu Lab A1 This is a remix of: https://makerworld.com/en/models/464107-tapo-c100-c110-camera-mount-for-a1-a1-mini#profileId-408036 I don't own the camera the original mount was designed for, so I…
This has two parts: The holder, and the back hook. I split it up as it would take longer to print due to the supports for the hook being so high up on the print.
This is a niche use case, but maybe someone will find it useful like me for combining two excellent tools to easily and accurately cut shapes from 6 and 12mm MDF. Guide is a two part clamped adapter that fits around the DCS571 base to…
Filament : PLA Nozzle : 0.4 Layer : 0.2 Support : Organic / Intelligent
DeWalt Jigsaw Hook for Multiboard (DCS334 / DCS335) A simple hook that clips onto the Multiboard and holds a DeWalt 20V MAX brushless jigsaw by the shoe. Works with both the DCS334 (D-handle) and the DCS335 (barrel grip) since they share…
This is a basic wall mount for a DeWalt jigsaw (DCS331). Its designed to be quite snug so that the tool doesn't slid out if you want to mount it under a shelf. I printed it with 6 perimeters and %40 infill as I wasn't sure how strong it…
I originally had an old phone mounted on a similar mount, but it was using some freeware, that had not so great quality. So i found the DCS-6100LH for ~9€, and it gives me 1080p, can reccomend for the price.…
Because im using the subwoofer as part of 2.1 system where its standing vertical i had to move the hole for the terminal plate to the side of the housing. Ive also made a remix of the terminal plate for bigger binding post, see my other…
Terminal plat to accommodate bigger Ø7mm binding post
I printed PETG 50% filling, Pipa_horizont_print to print horizontally as in the picture, to use a 5mm stud for the mortgage
Hello! I'm an Electrician making inserts for my tools. Updates: Updated the file for better fitment and strength. Insert Information : Its made for the Milwaukee Packout half parts organizer. I used a Dewalt XR Jigsaw (Model # DCS334B)…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
