1,879 models
This is a great design by Sneaks at https://www.prusaprinters.org/prints/3408-quickly-measure-sort-m2-m3-m4-m5-metric-screws-up- but also to cmh at https://www.thingiverse.com/thing:4154091 for sanitising this for me (version with no…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
THIS HAS NOT BEEN TESTED ON A HUMAN Let's be clear: if you print this and use this on a patient, that is your responsibility. I make no representations as to the safety of this device. It's an experimental model designed to stimulate…
Print approx. €5.17–€6.32 excl. taxPreliminary estimate for one variant
A small tablet holder to hook to an airplane table. Holding together by magnets The middle holder isn't really necessary, just made it to hold 2 devices a bit overlapping in the middle.
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
A brief video deomonstration: https://youtube.com/shorts/kiZKUkexKrg?si=kBOF8F9uXhrnBcDT Inspired by the struggles of some printers to use cardboard spools, this device will ensure level winding of filament onto a new plastic spool. Run…
Print approx. €4.58–€5.60 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE : A NEW MODEL HAS BEEN RELEASED, WITH SCREWS https://www.printables.com/fr/model/772056-devil-horns-for-your-hat-now-with-screws I love to add little custom stuff to my caps, so : why not horns? Use the holes on the cap to fix the…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
This adapter allows you to rack (19") network elements of the TP-Link manufacturer, more precisely the OMADA business range. Unfortunately the manufacturer has not planned to be able to rack this equipment via holes and brackets, many…
Print approx. €3.18–€3.88 excl. taxPreliminary estimate for PETGSource material: PET
Print with supports but only on the tip of the horn (if you don't block the supports around the hole for the screw, it won't be easy to remove) PLA is fine 15% infill 100% size 0.2mm use M3 screws (max 20mm long) with assorted bolts If…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for PETGSource material: PET
After a couple of years rowing I've notice that using the phone on top of the PM5 rower monitor with the provided phone holder I've been developing the tendency to arch the neck while rowing (especially on the initial "catch" position).…
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have here for you a Special tool for finding the center on a round rod or tube, just on any round thing. Suitable for the workshop for various uses. I used Bambulab PLA…
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for one variant
A little somthing I wanted and couldn't find, So I made it to share with Like minded people!
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a device for eating chips, nachos. Chopsticks for eating with fingers. They are suitable when you work on a PC and do not want to get your mouse and keyboard…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
Easy to make a cute Devil keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Locking device to lock clutch housing, used on BMW R1150 motorcycles. BMW part number - 11 5 640. Printed in 100% infill with PETG. Works and holds perfectly, even with those five 40Nm and 32° torque settings for flywheel bolts.
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
This was inspired by Zack Freedman's Gridfinity project. I wanted to be able to store some of my frequently used USB devices (USB-A or USB-C). I mashed up a couple different objects together to make this 1x2 bin that will hold 4 different…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant
Tap is a bluetooth dual switch access device that enables people with disabilities to control mobile phones, tablets and computers. It works by activating switch control on the selected device, and mapping Tap’s customisable buttons to…
Print approx. €2.97–€3.64 excl. taxPreliminary estimate for one variant
Insert one M6 nut into the black bottom of the model and solder it into the part, push the whole bottom through the orange part and seal the black part with an orange ring to prevent the black bottom from falling out. Insert the M6x70…
Print approx. €7.40–€9.04 excl. taxPreliminary estimate for PETGSource material: PET
an easy print stand from three separated part can be joint as Lego part, to hold devil fruits or any other spherical shape…. its work with heart shape. the idea come from sheep moon i booth last year have a so simple stand. print it with…
Print approx. €1.82–€2.23 excl. taxPreliminary estimate for one variant
Tired of scraping ice with a boring old scraper? Upgrade to the Red Devil Ice Scraper and watch that frost disappear faster than you can say 'hot damn!' Sacrifice some high-quality filament such as bloody strong Modified PLA, ASA or PETG…
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for one variant
Devlied Egg Holder to ease transport. With supports to cover with a clear wrap and not get into the eggs. Should be sturdy enough for transport without spilling.
Print approx. €8.86–€10.83 excl. taxPreliminary estimate for one variant
A box for Analog Devices Adalm-Pluto SDR with "Clock in" SMA connector for external Clock source. In near future there will be diffent bottoms of this box with USB holder, mounts to tight this box down. If a change is needed to this…
Print approx. €3.56–€4.35 excl. taxPreliminary estimate for PETGSource material: PET
v1 is suitable for devices with a total thickness up to 10mm v2 is more stabile and suitable for devices with a total thickness up to 16mm all versions with cut-outs for rubber feet on the bottom and charging cable feedthrough on the back…
Print approx. €2.86–€3.49 excl. taxPreliminary estimate for one variant
This is a remix of this design https://www.thingiverse.com/thing:4582540 . I modified the SCAD file to accommodate the Bosch Daredevil bits which are wider. Printed in 0.3mm layer height with no supports. Bit sizes for this print are: -…
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for one variant
Multi-device charging station is a custom-made product that features a 6-port USB charger hub purchased from Amazon. It includes a wireless phone charger and 3 standing slots to hold other devices. This product is designed to provide a…
Print approx. €10.52–€12.86 excl. taxPreliminary estimate for PETGSource material: PET
Understanding ladies concern when using a public restroom, they may rather use it standing up, this is a simple funnel mechanism that will allow them to do just that without spills, just use it, then rinse it in water after every use and…
Print approx. €0.82–€1.01 excl. taxPreliminary estimate for one variant
Daredevil Born Again episode 1 broken horn piece. Great gift / conversation piece for any Daredevil and Marvel fan. Quick print, .12 layer height for quality, no supports needed, any infill you want is fine, and a brim is helpful for bed…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
I've developed these straightforward brackets to mount 19" rack devices vertically onto walls. My design stands out by creating a small air gap between the device and the wall for improved ventilation. The fully parametric Fusion360…
Print approx. €5.67–€6.93 excl. taxPreliminary estimate for PETGSource material: PET
Devil keychain for your backpack, keys or just a general design :D Printed in PET-G Verbatim transparent red.
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
Maturity: Very good. 8 prototypes. In use since 2024/04. Personally I fixed my charger with some double-sided tape inside the charging station. Accept charger with the sizes: Up to 150x30mm Up to 75x40mm Slot space is 21mm. Printing…
Print approx. €27.74–€33.90 excl. taxPreliminary estimate for one variant
A stackable wash paint palette that doubles as a deviled egg serving platter. Printed in PLA with a combination of 0.1 mm and 0.2 mm layer heights with ironing for a smooth surface and fine curves.
Print approx. €8.50–€10.39 excl. taxPreliminary estimate for one variant
This is a print in place design for a tool to accurately size kid's shoes. It is as large as can be printed diagonally on a Prusa Mini+. Supports are required only under the slider in the circular cut outs. Either use a sharpie to color…
Print approx. €4.74–€5.79 excl. taxPreliminary estimate for one variant
Devil Car : Super Smash Bros
Print approx. €8.84–€10.81 excl. taxPreliminary estimate for one variant
A joke that I've spent too much time on: One of my airsoft teammates loves watching the hottest trends in the real “tacticool” shooting and considering the choice of a muzzle device, often kept repeating, that the best type ever is the…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Sunlu Meta Grey PLA+ Esun Bone White PLA Overture Matte Light Gray PLA Control3d White Swap Instructions: Start with…
Print approx. €4.10–€5.01 excl. taxPreliminary estimate for one variant
Introduction This is a housing for a gas metering sensor device using a reed switch. It may be used together with Gas Metering Device - Housing for PCB . Reed switch The housing is optimised for a reed switch with glas diameter 1.8 mm and…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
I have created a simple cultivation device for avocado seeds within cylindrical containers. Printed with bavarian wheat beer glasses in mind. Therefore the inner diameter should be smaller than 85 mm. Printed with Polymakler PLA.
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for one variant
Update If you use the osVAC system, have a look at the similar osVAC compatible adapter I made that you can use to connect Bosch Click and Clean devices to the osVAC system here:…
Print approx. €2.28–€2.78 excl. taxPreliminary estimate for PETGSource material: PET
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Overture Chocolate PLA Prusament Lipstick Red PLA ESUN PLA+ Beige PLA Control3d White Swap Instructions: Start with…
Print approx. €5.65–€6.91 excl. taxPreliminary estimate for one variant
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
I have recently purchased a PARKSIDE organizer so that I could organize and store all of my electrical components and various fasteners. As I was organizing my workspace I quickly noticed that the organizer didn't come with enough…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Note [July 6, 2023] : I have created an improved version of this print, which is essentially a simplified version which prints faster and uses less filament. See the improved version here:…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Mobile holder CFMOTO 450MT
Print approx. €11.41–€13.94 excl. taxPreliminary estimate for one variant
Prusa MK2 MK3 Watch Dog Smoke Detector Fire Saftey Device R3 detects small smoke and cuts down power to prevent fire, sends you push notification over WIFI / internet . ATTENTION: HIGH VOLTAGE, DANGER 220V ! Make only if you are confident…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
Printer : Ender 5pro Rafts : No Supports : No Resolution : 0.25 mm Infill : 10 % A Pythagorean cup is also known as a Pythagoras cup, Greedy Cup, Cup of Justice or Tantalus cup. How does it work? Link to the model from the video:…
Print approx. €14.07–€17.19 excl. taxPreliminary estimate for one variant
DEMON DIABLO DEVIL LILITH
Print approx. €4.00–€4.89 excl. taxPreliminary estimate for one variant
just a muzzle device I made to go on my aeon pro with the palmtop supply short kit. I havent tried it with any brass barrels or anything else aftermarket/modified. It fits in like the piece that comes wit the blaster and interfaces with…
Print approx. €4.28–€5.23 excl. taxPreliminary estimate for one variant
Are you tired of struggling with a large bag or box of litter when it's time to top up your cat's litter box with fresh litter, inevitably spilling litter everywhere and having the majority of it end up everywhere BUT inside the cat box?…
Print approx. €9.76–€11.93 excl. taxPreliminary estimate for one variant
I converted this pointer to a lever clamp.It is much more convenient to fix the measurement with one finger. For assembly, 4 M3 screws will be required and it is necessary to cut the M3 thread at the bottom of the pointer. Depending on…
Print approx. €1.16–€1.41 excl. taxPreliminary estimate for one variant
Devil woman sculpture Print instructions resolution 0.15 PLA Spectrum STONE AGE LIGHT no supports
Print approx. €4.07–€4.97 excl. taxPreliminary estimate for one variant
Wir haben ein offensichtlich altes Modell der Emcur Nasendusche (für Emser Nasenspülungssalz). Die mitgelieferte selbstklebende Halterung war bei uns nicht anzubringen. Also bestand Bedarf, einen Ständer zum Befüllen und Trocknen zu…
Print approx. €4.10–€5.01 excl. taxPreliminary estimate for PETGSource material: PET
Update - various angles now available! Description This is an adapter to connect any Bosch device with the Bosch-specific Click and Clean vacuum socket to the osVAC system. I made it for the Bosch miter saw GCM 8 SJL, but it should also…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
Würth Cutter Blade Break-off Device All-in-One Introducing the Würth Cutter Blade Break-Off Device All-in-One – one tool for every blade size! Breaking off a dull blade has never been easier or safer – no matter the size. One device…
Print approx. €3.09–€3.77 excl. taxPreliminary estimate for one variant
I don't submit a lot for contests, but I really like the look of the Qube 500 - customization is always a plus - and this is the first thing that came to my mind! I took some quite nice looking devil horns from @Preischl3D and basically…
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for one variant
This 3D model is a replacement for the detergent dosing door of the Miele dishwasher combi dosing device C1.11 220-240V 50/60 (part number 5919488). Instead of purchasing the entire dosing unit for €124, you can print this cost-effective…
Print approx. €4.22–€5.16 excl. taxPreliminary estimate for one variant
Hi there, I made a wall mounted support for devils wine. It can be used for all kind of climbing plants and can be easily scaled. The screw holes are for 3 mm screws (3.24 bold eagles per backyard ;) right now. Originally I made it for my…
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for one variant
A simple 3D-printable devil horns headband for costumes, cosplay, or fun accessories. Lightweight and easy to wear. Print settings: Material: PLA or PETG Layer height: 0.2 mm Infill: 10–25% Supports: Usually not needed Brim: Optional for…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
Are you in search of an advanced project, with large printed parts, gears and electronics? So, why not print your own pet/cat feeding device? I created detailed instructions on how to print and build the shown device - just leave you the…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
Connect two bottles of Woody's Beard & Tattoo Oil together to allow the remnants of one to drain into the other. Never waste a drop of that precious beard oil again! Printing: Print with the “cone” shape of the internal funnel facing up…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Tutaj znajdziesz 3 proste elementy, które prawidłowo złożone utworzą piramidę taką sama jak w serialu Diabelski plan. Here you will find 3 simple elements, which, when correctly assembled, will form a pyramid just like in the series…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Introducing the Würth Cutter Blade Break-Off Device – for a safer and cleaner workflow! Breaking off a dull blade has never been easier or safer. Simply slide the blade into the slot up to the stop, push– and snap. Clean every time. The…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
Mount for any 1U Zyzel USG device to stay upright without falling over Raises the device off the bottom to allow for additional airflow Screw-in and cable tie holes allow for an even more secure mount to the shelf Suggest printing in PETG…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for PETGSource material: PET
Introduction This is a housing for a gas metering electronics device. It can be used together with Gas Metering Device - Sensor Housing for Reed Switch . Printing The gcodes are ready to print. If you use the STL files I recommend to add…
Print approx. €1.21–€1.47 excl. taxPreliminary estimate for one variant
Easy and fast to print small device to perfectly measure out 2.0mL (2.9g) of fine salt (remember to use the stuff without added iodine) for a 0.9% saline solution for a 300mL nasal irrigator . The hopper is optional but recommended. It…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Simple rear ring for Приставка ПЗФ that fits to Fuji without M42 adapter. Use as strong filament as you have but even PETG works fine.
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for PETGSource material: PET
Was designed as a copy of original piece. Small but useful device. Printed: PLA (PETG/ASA could be better choice) Infill 15-20% No support needed
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
Hello, Today I have for you the Character Hell boy, devil, Satan . It is suitable for children to color and it is either Hellboy from the movie of the same name, or maybe the devil, or maybe the devil. I used PLA/PETG as the material. No…
Print approx. €7.72–€9.44 excl. taxPreliminary estimate for one variant
Zur Montage/ Funktion brauchen Sie nur noch ein 8mmRillenkugelager z.B. SKF 608, eine Vierkantmutter M6, eine Senkkopfschraube M6*20 und eine M30 Mutter als Standfuß, ausreichend für Windgeschwindigkeiten bis 10m/s! Bei höheren…
Print approx. €1.89–€2.30 excl. taxPreliminary estimate for PETGSource material: PET
The Inclined Salamander Positioning Device (ISPD) is a 3-D printed device designed to assist with the collection of sperm from axolotls and has potential uses for other salamander species. This device could also be applied to veterinary…
Print approx. €9.79–€11.97 excl. taxPreliminary estimate for one variant
I wanted to call it a heart attack preventer. But that might be seen as false advertising. When the printer is going in the other room, you know you're listening for untoward sounds. The one that gets me every time is the loud snap when…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
A simple notch that fits between the water tank and the coffee machine to stop the lid of the water tank and the water tank from vibrating and rattling. Modeled for Cecotec coffee machine. I would recommend printing in TPU, but PETG does…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
Gartentor Halterung/Arretierung // Garden gate bracket/locking device Diameter: 43mm Distance between top and buttom (center to center): 106,8mm Distance between top and gate bracket (center to center): 98,5mm
Print approx. €4.91–€6.00 excl. taxPreliminary estimate for one variant
Summary: Repair of a rolling device for cutlery drawer inserts After breaking the original part, the opposite left part was scanned with RevoScan Mini. The processing was somewhat time-consuming due to the size, especially the…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
FRC Team 2876 Keychain print in place multicolor V1: each color is on a separate layer recommend filament changes at layers 21 & 24
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
Improved Spool Holder Numbers for the Core One INDX I designed a new version of the spool holder numbers for the Core One INDX . The numbers are now clearly visible. So you can easily identify each spool while standing in front of the…
Print approx. €6.00–€7.34 excl. taxPreliminary estimate for one variant
Inspired by Vision Zero Vancouver's campaign Grab a Brick! Now you can print your own personal brick to protect yourself while crossing streets! Pictures at 100% and 25% scaled. Print instructions: Printable in PLA; For best results use…
Print approx. €8.51–€10.40 excl. taxPreliminary estimate for one variant
Texas Instruments LM35DT/NOPB is a wonderful and a cost effective temperature sensor however it is hard to mount it on anything that is not a PCB or a heatsink without it being a bit janky. I designed these little brackets to allow better…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
This simple learning device is designed to help toddlers understand how parts fit together through hands-on exploration. By using different shapes and connections, children learn basic building concepts, spatial awareness, and…
Print approx. €5.42–€6.62 excl. taxPreliminary estimate for one variant
We foster small dogs that need to be rehomed and periodically we get an older, deaf dog in. We needed a way to get these dogs to alert to us since we can’t call them vocally. Shock collars are out – they destroy trust and are inhumane.…
Print approx. €1.21–€1.47 excl. taxPreliminary estimate for one variant
For an older model Dirt Devil Shop vacuum.
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
for any device like the switch 2
Print approx. €4.28–€5.23 excl. taxPreliminary estimate for one variant
Fits on any Bambu sized printer. Use variable layer height to have it fit.
The 'Elster' Pipette Tip Sorting Device is a clever 3d printed tool designed to quickly sort and transfer 200 µL pipette tips into a storage box, eliminating the laborious task of manually sorting pipette tips. We re-share this device…
*v2. 22nd February 2024 - screw holes in left and centre plates updated to clearance holes DRAG is an assistive device that enables users to write or draw without having to form a tight closed grip with their fingers. Simply rest your…
Note: For a larger version that covers M3-M10 sizes up to 100mm, see my Bike Scruler . For a version of that with metal inserts for the M3-M6 sizes and magnets, see my Etsy store . Quickly sort and measure metric screws and bolts in sizes…
needed something to set devil fruit on, may need to be resized for some models i sized it to fit 3.5 inch spheres .16 layer 15% infill no supports
Video about the Designing process, The functionality and the Assembly Mechanical Bolt Sorting Device for M3 bolts/Screws 6-40mm End the struggle of manually sorting your cylinder head bolts Fully 3D Printed Operated by hand. No need for…
Print it and add O-Rings 15,8x3,1 Print Orientation with support for enforces only.
Tazmanian Devil, commonly referred to as Taz is from Warner Bros.' Looney Tunes and Merrie Melodies cartoons. Taz is generally portrayed as a ferocious, albeit dim-witted, carnivore with a notoriously short temper and little patience.…
Marvels awesome blind character from the TV series Dare Devil. Should make an awesome cosplay Cowl / Mask, Good luck Ricky and post some pics when you can, Cheers Jace "Please note to check the sizing suits your needs"
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Tazmanian Devil, commonly referred to as Taz is from Warner Bros.' Looney Tunes and Merrie Melodies cartoons. This model is the full body version of my original Tazmanian Devil model:…
You can purchase DIY kits and fully-assembled devices from my store by clicking HERE This is a fully standalone device designed for the Meshtastic project (https://meshtastic.org). These models are intended for personal use only. DO NOT…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Bring the world of One Piece to your 3D printer with this highly detailed replica of the iconic Gomu Gomu no Mi. The model faithfully captures the fruit’s distinctive spherical shape, covered in elegant spiral patterns, along with its…
Smooth Devil Horns Hey maker! 👋 Small devil horns with a smooth surface, perfect for costumes, cosplay, or decorations. Features: Scale the horns to your desired size. Smooth design for a clean finish. Small and lightweight – easy to…
This is it, this is what I have been focusing on for the last month. the system is done, I am not making anymore adjustments at all. There will be more mounts there will be more options but tis is the base system in its glory. Hi I'm…
A simple test tower for tuning acceleration and jerk/junction deviation. Fully customisable with the source file: https://cad.onshape.com/documents/1afa1c55109b3ef715f6a6c1/w/23d23b4f073e5e6749fc66f2/e/18cceba522813632f4ef37ec Companion…
![Bosh Daredevil Standard Spade Bit Holder/Rack/Storage [remix]](https://media.printables.com/media/prints/64459/images/671906_f394a1f0-88ec-49b4-ac5c-022447dab972/2021-04-22-072946.jpg)
