Dirty Dozen Puzzle
I've seen an interesting puzzle from Youtube ( https://www.youtube.com/watch?v=j6D1ie94y4M ) so this is it. Print 12 pieces of this to create one set of this puzzle. Category: Puzzles
- Downloads
- 2,703
- Likes
- 774
- Rating
- 4.9
302 models
I've seen an interesting puzzle from Youtube ( https://www.youtube.com/watch?v=j6D1ie94y4M ) so this is it. Print 12 pieces of this to create one set of this puzzle. Category: Puzzles
I wasn't satisfied with any of the models I found for clean/dirty dishwasher indicators, so I decided to practice some modeling and make my own. My wife hates the feel and sound of 3d print material sliding together, so I used a…
Resolve the endless dishes confusion in your household with this simple magnetic sign! This is an easy print that includes space for 5 magnets that can be dropped in with a pause during the print, and an optional color change can be used…
Dirty santa dice Schrottwichtelwürfel Dirty santa dice with simple game instructions / Schrottwichtelwürfel mit einfacher Spielanleitung Game instructions / Spielanleitung A gift may be taken from the center of the table. If you already…
If you like my work consider Buy me a coffee 😊
Dirty santa dice - Simple version (all persons have a gift) Schrottwichtelwürfel - Einfache Version (Alle Personen besitzen ein Geschenk) Dirty santa dice with complex game instructions / Schrottwichtelwürfel mit komplexer Spielanleitung…
Saw a few of these posted, but decided to design my own. A half twist of the knob switches between "Cllean" and "Dirty". I printed the Letters.stl in 2 colors. The first 1mm was the printed in the desired letter color (white). The rest…
Multicolor dishwasher sign no painting/MMU The sliding mechanism feels very satisfactory because the magnet makes it snap into place. I printed everything at 100% for a snug fit. So the text plates and magnets don't require any glue, i do…
Hey Timothy, Hows this for a weapon, Sorry a bit rushed, so let me know how you get on. Will post the badge next, Cheers Jace PS I read somewhere the gun was about th30cms long so do check the sizing suits your needs ; )
dishwasher sign clean/dirty print-in-place This is a Remix of Sliding Word Changing Dishwasher Sign by middlefingerboss Thank you for this great idea! I am not sure if this is the best idea I have had so far. Designing this as an assembly…
Yet another Dishwasher Label Features: Different colours for ‘CLEAN’ vs ‘DIRTY’ Slide easy side to side and wont come out No Multi material required Give it a try
Introduction This is a remix of the excellent dirty/clean dishwasher sign by Printess . It differs in that the base is printed vertically with two colors of filament, with the color changing midway up at about 45mm. That way, the dirty…
The source marked this model as adult content.
Simple clean / dirty sliding sign for your dishwasher. Works great with single extruder / pause / change filament type of printing. Simple print all three parts, place the 'clean' piece inside the 'dirty' piece and glue the other piece…
It holds ball caps. F3D included so you can make whatever changes you like!
For indicating from the outside whether the dishes contained within are dirty or clean. A pretty simple print overall, just one color swap to help with legibility and some superglued magnets are needed.
A simple and elegant clean/dirty sign for dishwashers. Easy to flip but won't accidentally change sides when the door is opened or bumped. No glue or magnets required, just filament and some double sided tape. The text on the sign piece…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a remix of Jimbotron's Dishwasher slider on thingiverse ( Clean Dishes, Dishes Dirty, dishwasher sliding sign by Jimbotron - Thingiverse ). I didn't have the magnets he was using, so I remixed it with 8 6x2mm magnets that I had.…
@ALX_1707 Had made an awesome kitchen thingie. I just needed to edit it a bit for a better view to text. Now I don't need to kneel in front of my dishwasher to see whether there's dirty or clean stuff inside. kudos @ALX_1707
Simple sign for the dishwasher to let people know if the dishes in there are clean or dirty. Simple print at any layer height, no supports needed. I used the Bambu Carbon to print this multi-color. The recessed spots for the magnets are…
A simple indicator you can attach to your dishwasher to indicate if it is clean or dirty. It measures 64 x 24 x 5.7 mm. No multi-material printing needed. Simple assembly with no glue required. To assemble, press the cover into the groove…
Just a remix of an existing model with added magnet holes in the back for 2 x 10mm magnets. The magnets I used are 2mm thick and just pop in securely without any need for glue. This is a remix of: https://www.thingiverse.com/thing:5257275…
Description: Yet another simple Filament cleaner, that snaps together with four 6x3mm magnets. Nothing special, but i got somewhat annoyed by my current hinged one, when switching through filaments in quick succession. Of course i could…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Dishwashers nowadays are usually so quiet that people don’t realize it is running. Plus my appliance is so well designed that no buttons, lights or indicators are visible when it is closed. Family members may open the dishwasher by…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is designed to use four 8mm x 3 mm magnets (I bought mine on Amazon). The magnets are concealed within Base, kept in place by Casing. The "Clean" / "Dirty" letters snap into place (or glue them). The tolerances are tight. If…
Here's my very first model. It's just a simple but effective silhouette from the movie Dirty Dancing.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a dual or single extruder print (2 colors) design for a dishwasher clean/dirty indicator. If you only have one filament color I recommend using a Sharpie or other coloring method to color the letters.
A magnetic sign to put on your dishwasher to indicate if its clean or dirty. Glue 4 (round, 6mm Dia, 3mm thick) magnets into the bottom Print instructions Switch filament colors after the base so the letters are better to read.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Supports required! Please add supports to the edges only! Not required for the bridges or for inside cartridge slot! Designed to be used with Teensy 4.1 Game Boy Cartridge Case, available on Printables here:…
Replacement bottom ring cap for a Bissell ProHeat 2X Revolution dirty tank. A stand in for part # 1606415. Best to print in PETG or ABS
Needed a sign to tell people not to put their dirty dishes into the clean dishwasher ;) So looked it up on Thingiverse and decided to make a letter-slider version. But instead of taking it from here I decided to use it as a CAD exercise.…
I like that sign, but wanted the option to have the "Clean/Dirty" in green/red. First, the CLEAN letters are printed. Then the DIRTY letters without removing the previous ones from the print bed. Finally print the thing over the letters.…
This model is really easy to print. Use layerheight color change for the insert plate, no multicolor is needed. (3mf file) Attach the two color plate with glue or double sided tape, force in the slider and attach the whole thing with…
Just a quick and dirty headset mount for monitors. Can be mounted with a double-sided tape at a top corner on a monitor. Printed in PLA and in ASA - both is working fine.
I recommend printing face down, no supports are needed, your printer can bridge over the text. Feel free to fill in the text for contrast using paint/silicone/whatever your heart desires! Leaving it as-is, you'll have a lovely shiny…
Fully printable design. To print contrast letters you can swap the filament halfway during plate print. When both parts printed, you should put it together with a gentle click. Use double sided tape to mount the thing on a dishwasher.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Designed a simple indicator for the dishwasher. Uses (4) 16mmx2mm magnets or sticky pads to adhere to the dishwasher.
Simple print. Only a few recommendations. Print with 3 walls and at least 10% infill. If you're attempting a filament swap, layer 50 is the one. Magnets were purchased from Amazon Choice kit:…
Split file to parts. Use MMU version and assign color to each letter or non-MMU version and add filament change at 5.0 mm and 5.8 mm height. Change type for 3 cylinders to Negative volume and scale them to fit your magnets.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Box for the Dirty Dozen Puzzle ( https://www.printables.com/de/model/84752-dirty-dozen-puzzle )
I adjusted the tolerances of the original model as well as tweaked some thicknesses in order to improve the printability on the .3mm setting. Tolerances were previously: 4.6mm model thickness, 5 mm slots, .4mm gap between “wells".…
Dirty Dancing - Johnny Castle - 1987
Hi Timothy, this was my 1st attempt at it so really pleased. Do check the sizing suits your needs, Cheers Jace My only regrest as I got a bit carried away with the depth of the ingraving ; ) So I had to have another go ; ) so you have…
I set up a few color changes in my slicer in order have the letters in different colors. For the base, I started with light grey, switched to red once the “Dirty” letters began, switched to green when the “Clean” letters began, and then…
Liked the original, thx for the upload Printess … however, after printing had some issues with it so I reworked it for myself and decided I would post here in case it helped others: Easier more enveloping fit front cover no glue stays…
Iconic Movie Moments - Dirty Harry - Do You Feel Lucky, Punk - 1971
I made this for my dishwasher so I can tell how if its clean or dirty I used magnets that are 3.00 mm tall and 6.00 mm used a 0.50 mm clearance and they go in perfectly Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
Dice Tower - The Air Handling System - A dark and dirty story... The megalopolises are full of stories. Just as the dead are as well. This is the dark tale of… The Air Handling System. Woe to them that seek deliverance in its dark…
This is the best project I have found. In my version, I changed from 5 to 6 letters, and changed the angle of the indicator to make it easier to see. Knob is only part needing supports. Print it pin side down, to ensure a smooth…
Slide-on/off top cover for the Dirtywave M8. This would allow you to put it in a pocket or bag without danger if the keys and switches being caught or damaged. It can be reversed and the M8 is usable with it on the other way around,…
My first print submission so please be kind and constructive with any criticism. I have included two different size prints. Set a color change for the top 1mm to get a two color print. Holes on the back will fit 6x2mm round magnets flush…
Stackable sorting trays with lids to secure them for storage or travel - This is modular to fit your needs! I made these mainly to help keep my work space clean and organized with the possibility to expand them as my needs change in the…
I could have sworn I saw one of these on printable to make, but I could not find it. Decided to design a simple one myself instead. Print the three pieces, then glue together the two base parts, the sign slots in and can be rotated to the…
Update 8/22/2017: I added a new two-part version of the sign (labeled "separated") that allows you to color the letters using filament switching, or simply have an easier time painting them. A simple sliding clean/dirty sign for…
This is a basic sliding dishwasher sign to show whether your dishes are dirty or clean, just flip the sign when you start the dishwasher and whoever walks by next will know your dishes are clean! This uses a snap-on slider, and uses…
The models for temperature towers all seem to be large and long prints. This is something that will likely just be thrown away, and no one (I don't, I assume everyone is just like me) wants to wait hours for a tower to print to find the…
Just a non-MMU remix of Printschnitzel.at's "print-in-place dishwasher sign clean/dirty". I printed the model at 130% scale due to I thought the model looked a little small. The signs clean/dirty has the letters slightly recessed so you…
Magnetic flip sign for a dishwasher to show if clean or dirty dishes are inside. UPDATES: Update 4: Released standard files Version 2 (V2) no longer needs support. Update 3: Released Print in Place (PIP) files NOTE: PIP and standard files…
Angels With Dirty Faces - William “Rocky” Sullivan (James Cagney) & Laurie Ferguson (Ann Sheridan) - 1938 3D printable model.
Do you keep forgetting whether the dishes in your dishwasher are clean? Use this magnetic slider. Important: This print is a multicolor print, tho you don't need an MMU or a multi-nozzle printer. You can use this tutorial to learn how to…
This is my version of a portable “Dirty Dozen” Puzzle. This design is more or less a remix from the design by FunFunBoy. I scaled his pieces and added a box where you can store the puzzle in any state. From start, all parts loose, to…
A Modification of SimonSays' great slide on/off cover for the Dirtywave M8 hardware tracker, reversible as original. I closed the bottom for protection in case of a fall, added an opening in the power button area and two small slits on…
A magnetic Dirty - Clean sign for your dishwasher. Snaps Together with no fasteners or glue. Uses four 15mm dia. x 1.64mm magnets for the base and two 8mm dia. x 1.7mm magnets for the dial which I bought in a set from amazon…
This is based on a puzzle of the same name which I saw on the internet. Print 12 copies, then make them fit together nicely, as pictured. Seems easy right? Use OpenSCAD's customizer to create larger or smaller variants.
The Dirtywave M8 is a music tracker powerhouse. On its own it's a piece of art. The downside of the device is the small battery. You can easy fill it up with a power bank. But why not combine the two. The device will get a bit more bulky…
This sign is designed to use stacks of 2 standard 6x2mm magnets in each hole. I printed mine with the ‘Clean’ side flat on the bed, but it shouldn't make a difference. I used two color changes on my Prusa Mini at 0.2mm layer height to get…
Do you want to double (or quadruple) your M:01’s battery life? Do you want to fix port crackle (more permanently) from flush ports (early M:01s)? Do you want to mod out the color of your M:01 gameboy style? Do you have a 3D printer? If…
Same as original, added extra step to be able to print it duo/trio color. 0-0,16 red layer, 1,6 - 1,8 green layer, 1,8 - 2,0 color of your print (black)
This is a quick and dirty trash diverter for a downspout. The initial version takes a 2"x3" input, and outputs to 4" rounds. As with all 3D prints you use outside, you either need filament that can handle UV or you need to paint it with…
This is a sliding indicator for your dishwasher that shows if it's clean or dirty. It comes in a 6 by 2 mm magnet version and a no magnet version. If you have a different type of magnet, you can easily edit the values of the spreadsheet…
⭐ The indicator and slider snap into the housing ⭐ No supports needed. ⭐ Built in tolerances for easy fits & smooth sliding ⭐ Drawing of the indicator included so you can customize your own Indicator files are included for Clean/Dirty…
Clean/Dirty Dishwasher Magnet that indicates the status of your dishwasher by simply spinning it. Superglue a .375" x .125" neodymium magnet into the back.
Značení na myčku. Na první pohled vidíte, zda obsahuje čisté / špinavé nadobí :-) Štítek je možné přidělat pomocí magnetu nebo oboustranné lepicí pásky. Dishwasher dirty/clean indicator Update: v souberech naleznete 2 různé vyrianty
Who does not know it: dirty hands when checking the air pressure of the tires on the car / motorcycle. This is a thing of the past. With this valve opener, you simply unscrew and screw the caps back on without getting your hands dirty.…
panBot Mini quick and dirty This small robot car is printed quickly and can therefore be used quickly. The Super:Bit is pushed on it and therefore no further lid or anything else is needed. Body and 4x wheels print. For the grip you can…
Pet Semetary - Zelda - "The dirty secret..." - 1989 3D printable model.
For years, our dishwasher clean/dirty flag was a dollar-store cheapo. When it got knocked off the dishwasher one time too many and broke, I decided (with my usual tendency to over-engineer everything) to print a new one. The original plan…
This magnet was one of the first things I wanted to 3D print but I never found one like it, so I made one using TinkerCAD. The face is intentionally goofy, mostly. I designed it to use craft magnets bought at Wal-Mart which are 19mm in…
I modified @FCUK261960 model, added a second compartment, the hinges are made with cylindrical pins Ø2 x 25 after drilling the holes. I moved the fasteners onto the bases to be able to print the central part. I printed on the bases if it…
this model can help you easily find out if your dishes are clean or dirty.
A box to store the puzzle in. It fits the puzzle assembled as well as disassembled. When storing the puzzle disassembled, there isn't anyfree space left so you don't have to wonder if you have all pieces and count them.
This is a remix of tc_fea's dishwasher sign https://www.thingiverse.com/thing:4901740 I've added three magnet slots. Two on the back of the sign to hold it to the dishwasher. And one on the back of the slider to snap it into position (it…
G-code contains a pause to insert 4 magnets 8 x 2 mm and a colour change.
Dishwasher Dirty/Clean magnetic sign to indicate the status of the dishwasher. it is printed in 2 colors on Prusa MK3s with one extruder. The print has 3 magnets that are embedded in the print. At about 3.2mm height there is PAUSE in the…
I set out to make a ‘wings’ style grip, but I found this to be simpler and work really well. It's got a couple of channels to run cables through if you'd like. It's a compromise between size and steadiness as a ‘stand’. More than anything…
Don't judge, you need to rework the holes, and I just used a sponge as cleaner and a rubber band as closing thing… Could be done much better, just needed something really quick because I have relative dusty roll of petg..
There's a lot of designs for dishwasher clean/dirty signs, but I need a physical reminder when not to accidentally put dirty dishes in with the clean ones. This flips down in the way of the handle so I notice when opening the dishwasher.…
I did a remix to use 3x 6mm x 3mm magnets on the backside Category: Kitchen & Dining
Just wanted to add 8x3 magnets to the back so we don't need to use adhesives! Works great - just super glue them!
UPDATE: Now with recesses for magnets in the slider for magnetic latching! You will need: 4x 10x1.5mm disc magnets (OPTIONAL: +2 for the slider latch) Ideally, 3 colours of filament My print settings: Infill: 15% Layer Height: 0.15mm…
I printed this using ABS, but it should print with other types of filament as well. 2 wall loops, 10-20% infill, no supports needed. Prints in two pieces - the main body of the sign + the sliding piece. I would recommend gluing in your…
Two-piece design of clean/dirty, with “stencil” design for people who don't want to use multiple filament colors or paint to make the letters. I attached the holder piece with small ½" width command strips. No supports needed. Make sure…