Search results: dispenser

Sort order

4,983 models

P
PrintablesMiguel M.

Tape Dispenser, Multi-size/Modular

This is a Modular and multi-size tape dispenser. I first designed this as a single size (3/4in) non modular dispenser, held together with screws. The comment I got the most was : were are the other sizes? I refined the design, corrected a…

Downloads
8,814
Likes
4,733
Rating
4.89
P
PrintablesTantalus

Pokemon Booster Pack Dispenser Unit

A Custom-Designed Dispenser to fit Pokémon Booster Packs up to x43 packs for the single dispenser & x86 for the double dispenser lid is optional depending on your needs. The Dispenser prevents damage to booter packs, warping & UV…

Downloads
2,903
Likes
288
Rating
5
P
PrintablesHouzvicka

AA + AAA Battery Holder/Dispenser for IKEA Skadis

Battery dispenser for IKEA Skadis Board. Holds up to 11 AA & 11 AAA batteries. There is also version only for AA batteries .

Downloads
1,881
Likes
251
Rating
5
P
PrintablesRESTLESS DESIGN

Battery Dispensers (5 versions)

This design is based on Fukar's design: https://www.thingiverse.com/thing:3245139 My additions/modifications are: Mounting options for both screws and magnets (10x2mm magnets) This design prints in one piece, which increases part strength…

Downloads
1,681
Likes
190
Rating
4.63
P
Printableseyalshtark

Actually useful Sheep and Goat toilet/tissue paper roll holder and dispenser

UPDATED STL FILES An actually useful remix of the classic toilet paper holder. This one can actually be used to dispense the paper. A fantastic gift to give to your friends. Printed from black PETG. I use an epoxy glue to connect the…

Downloads
1,582
Likes
482
Rating
4.8
P
Printablesslelham

Pop-up sticky note dispenser

couldn't find a good pop up dispenser for sticky notes (the ones that come zigzag) So designed this simple dispenser. At first I left both sides open but since the top part with the opening weren't connected to the bottom it was very…

Downloads
1,373
Likes
179
Rating
5
P
PrintablesWill

Can Dispenser Adjustable XL no support

Wanted a single piece print for the can dispenser, and just placing the parts together in prusaslicer was leaving wall lines in the part where the connectors were, so reworked it in fusion to make each side be a single part with no…

Downloads
1,366
Likes
622
Rating
5
P
PrintablesKollin

Dental Floss Pick Dispenser (Flossers)

Easy to print. No supports needed. Simply load flossers as seen in picture, insert twister, snap on base. Designed to work with Meijer brand interdental flossups . Also works with Aim brand precision floss picks (thanks @Lacemaker!). Will…

Downloads
1,171
Likes
263
Rating
4.33
P
PrintablesEdgar.A

Infinite tape dispenser

Here is an infinite tape organiser and dispenser with two measure, 55mm and 30mm. All the pieces are 3d printed. I recommande you to not use the printer files it just an exemple to show an idee of time and mass that will use for this…

Downloads
1,102
Likes
311
Rating
4
P
PrintablesJakub Kříž

Compact Capsule Filler (00 size) with Credit Card Mixture Dispenser

Compact Capsule Filler with Credit Card Mixture Dispenser This compact capsule filler is designed to fill 24 capsules of size 00 in one batch using a credit card as a mixture dispenser. The capsule filler is made up of three functional…

Downloads
1,020
Likes
109
Rating
4.8
P
Printablesaeharding

🐶💩 Outdoor Dog Poop Bag Dispenser

Specs Holds bag rolls up to 35mm diameter, 65mm wide. ✅ AmazonBasics ✅ Frisco … and many others! Print tips 🧩 2 parts: Main body and “pin”. Print separately for cleanest finish. ⮑ Print body left side down. Print pin upside down. ✨…

Downloads
716
Likes
122
Rating
5
P
Printablesckassoff

Georgia-Pacific paper towel dispenser key

I couldn't find a “key” that had both parts on it, so I sketched this one up

Downloads
595
Likes
33
Rating
5
P
PrintablesKaliM

Parametric dispenser - dishwasher tablets and more

I have made updated model with lid and viewing ports, check it out: New version I present to you fully parametric boxy things dispenser - originally meant for dishwasher tablets. You can use it of course for anything with boxy shape.…

Downloads
533
Likes
199
Rating
5
P
PrintablesWerner-3D

Shooting-Patch-Dispenser

I created that shooting patch dispenser to replace the standard paper patch dispenser while they get wet and don't work very well after a while. In case the lid is not holding as expected, a small tesafilm strap can be used to secure body…

Downloads
438
Likes
31
Rating
5
P
PrintablesMarSzal7500

IKEA Skadis- 608 bearings dispenser- no supports

A dispenser for twelve standard 608 bearings compatible with the IKEA Skadis perforated board system. When printing, it is recommended to use a gyroidal infill and lower print speeds to maintain maximum precision, so that the bearings do…

Downloads
411
Likes
137
Rating
5

Menstrual product dispensers – collab FA CTU and Prusa3D

FA CTU brings a design that matters. This student-designed menstrual product dispenser was adapted for 3D printing to be accessible, easy to produce, and ready to use in schools, offices, and public spaces. The model is based on a design…

Downloads
365
Likes
286
Rating
4.67
P
PrintablesTantalus

Isopropyl Alcohol Swab Dispenser

I just needed a way of storing my Isopropyl cleaning wipes. I looked around on Thingiverse did not find anything that matched what I wanted, so I quickly made some measurements and created this storage box / Dispenser. The Swabs Measure…

Downloads
312
Likes
63
Rating
5
P
Printableskaje

Frog Postage Stamp Dispenser

This print is a remix of a frog sculpture I found here: https://www.myminifactory.com/object/3d-print-frog-sculpture-3d-scan-59240 I scaled the original by 50%, and created an opening in the inside to hold a postage stamp roll, with an…

Downloads
279
Likes
59
Rating
5
P
PrintablesApex23

Ikea Skadis holder for Tamiya Masking Tape dispensers

Organize 18,10 and 6 mm Tamiya Masking tape dispensers on your Ikea Skadis board. See also my other designs for more ways to Organize your Tamiya tools on the Skadis board.

Downloads
276
Likes
34
Rating
5
P
Printables3DPrintM.D.

Ergonomic SMD Solder Paste Dispenser for 1ml and 3ml Syringe

For those of you who place solder paste on a PCB by hand using a solder paste syringe, this tool provides additional control and consistency to the application process. Parts Printed: Syringe Holder [A] Syringe Plunger [B] Knob [C] 1ml…

Downloads
267
Likes
61
Rating
4.5
P
PrintablesHoracio

Rubber band loaded Business Card Holder / Dispenser

Description Rubber band loaded Business Card DISPENSER This is a dispenser of Business Cards which used rubber bands for a “spring-loaded” mechanism. The main idea got from Honza, so go visit his profile to see his other designs. Honza |…

Downloads
265
Likes
57
Rating
4
P
PrintablesJan Vitek

Dog shaped coin bank and soap dispenser

Print your own set of cute dogs to serve in your home as a soap dispenser or a coin bank. There is also included a plain dog model which can be printed as is or remixed to some other useful things. Dog created in Blender, mechanical parts…

Downloads
246
Likes
34
Rating
5
P

Pod Dispenser (Dishwasher Laundry)

A simple and effective dispenser for laundry or dishwasher pods. Mounted to the wall with two screws or 3M Command strips. Supports on for the overhang in the mouth of the dispenser. I printed in PLA at 0.3mm Layer height, 2 Perimeters, 3…

Downloads
226
Likes
61
Rating
5
P
PrintablesMakafab

Sanitary pads dispenser

I design this model for my girlfriend She wanted a pads dispenser to make more elegant than just letting the box of pad in the bathroom. The cap snap in the box, i have print both of them in PLA I have pretty big hand but the hole is well…

Downloads
221
Likes
38
Rating
4.33
P
Printablesel.pollo.diablo

Chocolate and candy dispenser

Easy to print and Assemble Mason Jar Candy Despenser. Requires: Wide Mouth Canning Jar (Mason Jar) n°2 M5 x 25mm Socket Head Cap Screw n°2 M5 nut n°1 M8 x 60mm Socket Head Cap Screw n°1 self-locking m8 nut (It absolutely needs to be…

Downloads
167
Likes
84
Rating
2
P
PrintablesBenni

Panty Liner Box / Menstrual Product Dispenser

This is a little box for storing panty liners. The lid is optional, maybe for a vacation space that gets some dust.

Downloads
161
Likes
27
Rating
4.5
P
Printablesbenedikt314159

Bin filler and dispenser for smaller parts, especially for WAGO clamps

Bin filler and part dispenser for Honeycomb storage system Functionality With this model you can fill up your storage bins easily and fast by just pressing the bins against the front lip of the slider. A spring will bring the slider back…

Downloads
147
Likes
128
Rating
0
P
PrintablesNickyD20

Q-tip/Toothpick Container/Dispenser

Container is designed to lift items along with the lid, providing easier access to small items. The spherical knob and lift are kept together with threaded parts, m4 threads printed in the model. Over tightening will cause it to break, so…

Downloads
146
Likes
22
Rating
0
P
Printablesinfn8

Nespresso Vertuo Capsule Dispenser - Dual large

Nespresso Vertuo Capsule Dispenser. This design holds two of the 61mm x 68mm boxes.

Downloads
136
Likes
49
Rating
0
P
PrintablesEdgar.A

Magnetic paper clip dispenser

Here's a magnetic paperclip dispenser inspired by those sold by maped. I use an 10mm magnet. If you print it at more than 0.10mm you'll need some support. That's why there are 2 g code files, 1 with supports and 1 without. Print detail :…

Downloads
136
Likes
24
Rating
0
P
PrintablesKodiac

Soap dispenser refill insert (for example Sagrotan)

The idea is simple - just print the 2 parts. The first insert screws into a 20 mm hole that you drill into the top of the empty container. I would recommend to glue it in with some super glue or 5 minute epoxy to secure and seal the fit.…

Downloads
132
Likes
21
Rating
5
P
PrintablesAudi

32mm and 78mm Tape Dispenser Spindles

Okay you Sublimation Printer makers, you asked for it, you got it. :D A standard office tape dispenser is too light to use one handed. So here are a couple of spindles to use with large, heavy dispensers like this one...…

Downloads
115
Likes
20
Rating
0
P
Printableschrisb

Refill plug for Sagrotan no touch soap dispenser

“reduce, reuse, recycle” Verschlussstopfen für gebohrtes 10mm Loch. Macht den Seifenspender nachhaltig nachfüllbar. Schont die Umwelt, spart Plastik und Geld. Looks nice with Prusament Crystal PETG *Anwendung auf eigene Gefahr,…

Downloads
112
Likes
9
Rating
0
P
Printablesmpatl

Weighted Cassette Tape Dispenser

This isn't a very complex remix. All thanks to the original model including the .step file. I've added screw holes for real screws and included hollow areas that can be filled with buckshot, fishing weights or sand (if using sand wad some…

Downloads
111
Likes
37
Rating
5
P
PrintablesAudi

32mm Tape Dispenser Spindle

This one is for you Sublimation Printer makers that use heat tape. The spindle for a standard tape dispenser is too small and doesn't hold the tape. This spindle is 32mm in diameter. Edit: Also see my 32 mm and 78 mm spindles with 6 mm…

Downloads
111
Likes
31
Rating
0
P
Printablesgjpc

Fletching Tape Dispenser

Fetching tape is my favorite method of attaching my feathers to my arrow shafts. It is a bit tricky to handle the double sided tape, the feather and the shaft. There is a commercial dispenser available, but I like my version better. The…

Downloads
108
Likes
14
Rating
0
P
PrintablesPataBenda

Menstrual Products Dispenser / Zásobník na hygienické vložky

EN This is a dispenser for women’s hygiene products, intended for use in public restrooms (schools, offices, shopping centers, etc.). As of January 2026, a regulation comes into effect in the Czech Republic requiring the provision of…

Downloads
101
Likes
9
Rating
0
P
PrintablesCreavertor

18650 Battery Dispenser Tower Box 32X No Supports

Dispenser Tower Box for 18650 Batteries, more than 32x units inside in 3 columns with visor across the Walls. I design it thinking in 70x22mm size (some of my batteries have tape to cover the terminals). Included two files box and top…

Downloads
100
Likes
9
Rating
0
P
Printables3dprints4life

Garniertülle Stern für Sahnespender / Plum Blossom Tip for Cream Dispenser

Dies ist eine Ersatztülle für einen knapp 50 Jahre alten Sahnespender. Sollte die Tülle so leicht aufsitzen kann diese entweder lackiert werden (Achtung: Lebensmittelechten Lack verwenden!). Alternativ kann das Modell auch 1-2% kleiner…

Downloads
98
Likes
3
Rating
0
P
PrintablesRobert Schiele

Refill Funnel for Tiny Salt Dispenser

I have a tiny salt dispenser that is extremely nice to take with me when going on a hike but is quite challenging to refill. With this funnel, it is now an easy task. This prints in vase mode. In my case with 0.2mm layer height with PETG…

Downloads
87
Likes
13
Rating
5
P
Printablescaptaincorey

Cotton Swab Qtip Holder Dispenser

I simple holder with lid for cotton swabs. It is the perfect size to accommodate the 375 count box of Q-tips! The model in the picture was made with the fuzzy skin option!! The g-code does not!

Downloads
78
Likes
4
Rating
5
P
PrintablesAsh

Wall mount glove dispenser (23cm x 13cm x 6.5cm)

Model Fits boxes up to 23cm x 13cm x 6.5cm, uses 4x 8G screws to mount. Make sure to leave enough room above to insert and remove the boxes when mounting on a wall. Parts needed 4 x 8G Screws Installation (1) Use a spirit level to ensure…

Downloads
71
Likes
13
Rating
0
P
PrintablesjonnieZG

Stylish Poop Bag Dispenser

Description A simple, yet stylish dispenser for doggy poo bags. Printing Options The enclosed 3MF PrusaSlicer model files include: A version for single-color model with no embossed image (smooth top and bottom) A version with a bone image…

Downloads
68
Likes
8
Rating
0
P
PrintablesMao Hira

Masking tape dispenser

Dispenser for rather small masking tapes with inner diameter > 25 mm and width < 20 mm. Assemble two parts together to holed the tape. The looseness between the two parts can be adjusted by attaching some tapes around center circle of…

Downloads
65
Likes
11
Rating
0
P
PrintablesCrypdonick

Brother P750W Dispenser

The labels to be printed always flew halfway across the table in our office. With this dispenser, they are slowed down and can be picked up very easily via the ramp.

Downloads
62
Likes
11
Rating
4.33
P
PrintablesSembazuru

Alcohol Prep Pad Dispenser

I needed a holder for the Alcohol Prep Pads that I've been getting from Walgreens that come as a pair of pads. This is designed to sit on a counter/desk/flat surface and hold most of a 400 pack of alcohol pads. My MK4S isn't tall enough…

Downloads
53
Likes
13
Rating
0
P
Printablestwjst

Bouillon Cube Dispenser

Bouillon Cube Dispenser Simple dispenser which allows organization of bouillon cubes with a small footprint in a kitchen cupboard. It's sized to fit Knorr cubes available in Switzerland. Fusion 360 file is attached to easily adapt to your…

Downloads
49
Likes
6
Rating
0
P
PrintablesDik Harrison

Tape dispenser for mounting on the side of a cabinet.

In my workshop, I was using a pegboard-mounted rod to hang my tapes on and wanted something better. I saw and tried "tape dispenser - side mounted" by book (https://www.printables.com/model/514012-tape-dispenser-side-mounted) but found it…

Downloads
48
Likes
12
Rating
5
P
PrintablesDLD Design Fab

Swisspers Cotton Rounds Wall Dispenser

This is a wall-mounted Cotton Rounds dispenser. The design was done referencing the Swisspers brand of Cotton Rounds but may work for others. Wall mount fastener holes are sized for #6 pan head screws, so any drywall anchor or wood screw…

Downloads
45
Likes
6
Rating
0
P
PrintablesLOCKit

Raiser stand for cat water fountain dispenser or bowl no supports

Cats survival instinct makes these furry companions tend to drink water from above the ground level to avoid poisoning or bacteria infection. This little stand will help your pets keep their instincts intact and also let the spilled water…

Downloads
44
Likes
10
Rating
0
P
Printablesredoktor

Soap dispenser key

Best results with PLA, layer height 0.7 mm, 25% infill and no supports. Created in FreeCAD. Printed with Prusa mini+.

Downloads
44
Likes
6
Rating
0
P
PrintablesAnthonyMakes3D

Pocket Tissue PPE Waist/ Wrist dispenser

Need quick protection? Have to touch something that might be contaminated? Well, you're in luck, introducing the pocket tissue dispenser! The pocket tissue dispenser is your protection when you need to open a door, push the elevator…

Downloads
41
Likes
6
Rating
5
P
Printablestoddanglin

Acid Brush Dispenser

A simple container and dispenser for disposable acid brushes, commonly used for spreading glue, oil, acid, flux, solder, and pipe dope on projects. This dispenser was built for 3/8" acid brushes measuring 5.5" in length (specifically…

Downloads
34
Likes
5
Rating
0
P
Printableskvlasblom

Cellotape tape dispenser tape holder

Ever lost your tape roll holder? Print this to replace it! Pin length: 25mm Pin Diameter: 6mm Taperoll inner diameter: 26mm

Downloads
32
Likes
3
Rating
0
P
PrintablesMattis

0.50 €-Cent Dispenser

A wall-mountable dispenser for 0.50 € cent coins. Easily accessible by swiping the coins out from the bottom. Scale shows the amount of money in €. Attach to a wall with adhesive tape. If you are interested in modifying the model to fit…

Downloads
31
Likes
3
Rating
5
P
PrintablesDabovos3D

Tape Dispenser

Simple tape dispenser with spikes, for easier dosing.

Downloads
30
Likes
8
Rating
0
P
Printableslovemetwotimes

Safety lock for Menda (Menda-like) IPA dispenser

August 2025: Updated models for aliexpress knockoffs bottles. Every dispenser is different, fitting may vary. Safety lock for Menda (Menda-like) pump dispenser. Lock protects against accidental pressing of the pump. Print instructions 0.2…

Downloads
27
Likes
7
Rating
5
P
PrintablesLuluX

Soap dispenser

Print settings: Perimeters: 4 Solid layers Top / Bottom: 5 / 5 Scarf joint placement: Contours Material: PETG Optional Modifier: Range 0.00-141.00 mm Fuzz skin: Outside walls point distance: 2mm thickness: 0.1 mm Required hardware: soap…

Downloads
26
Likes
5
Rating
0
P
PrintablesJacob

Wall-Mount Holder for Dispenser Bottles (Max Ø 70mm / 2.75")

A sturdy wall-mount holder for dispenser bottles with a maximum diameter of 70mm (2.75"). Designed for easy installation with screws, this holder provides secure and accessible storage for various bottles, including hand sanitizers.…

Downloads
24
Likes
1
Rating
0
P
PrintablesAWSW

Tangle free 64 AAA battery dispenser.

Tangle free 64 AAA battery dispenser. On my way to another (bigger) project about battery management, I thought you might like this battery holder or dispenser which stacks the batteries tangle free, which most holders I tried so far…

Downloads
24
Likes
3
Rating
0
P
Printablesdvir_we

stevia dispenser

Dispenser for Stevia

Downloads
24
Likes
7
Rating
0
P
PrintablesBoris_Ducheval

Oval organizer – all purpose or sink soap dispenser & accessory holder with drainage holes

This compact oval organizer is designed to keep your sink area neat while maximizing space efficiency. The layout combines two functional sections in one seamless footprint. Cylindrical compartment — 70 mm inner diameter, perfect for…

Downloads
21
Likes
7
Rating
0
P
PrintablesRudi

IKEA soap dispenser KALKGRUND sealing insert

I have desight a new sealing insert for the IKEA soap dispenser KALKGRUND. I don't know if anyone else had this problem. There was always a negative pressure in the bottle, so the soap was only dispensed very timidly. With the new sealing…

Downloads
20
Likes
2
Rating
0
P
Printables이 동국

Soap Dispenser wall hook (Zhiya)

You will need a glue gun or double-sided stickers to attach what you made to the wall. It may be a bit tight when you put it on for the first time. I used hot glue to attach the hook to the tile.

Downloads
19
Likes
1
Rating
0
P
Printablesyynovik

Quakers oats top lid dispenser

It's a Pop-on/off top lid dispenser for standard old-fashioned Quaker's oats containers, making it easier to pour oats out of the container in a more controllable way. I use it to pre-make my weekly supply of overnight oats. This initial…

Downloads
16
Likes
1
Rating
0
P
Printablesmuseofwords

Mask Dispenser

Tried it with fuzzy skin an it looked nice

Downloads
15
Likes
1
Rating
0
P
PrintablesRyanGuy

Disposable Mask Dispenser - Say It! Don't Spray It!

I wanted a mask dispenser to use in our Speech classrooms at MJC. I remixed (https://www.thingiverse.com/thing:4763087) design and added our logo and a catchphrase? Be safe and enjoy!

Downloads
13
Likes
1
Rating
0
P
PrintablesPieter Koenen

Dry Food Dispenser - Variable Dosage - Rubber Blade Gear Redesign

The Zevro dry food dispenser only allows a fixed dosage per portion. But what if you want to offer less, for example half a portion? This redesign allows just that. You can use the supplied raised decks to vary the dosage. They reduce the…

Downloads
10
Likes
2
Rating
0
P
Printableslclab

NOVELTY | Gum Dispenser – Basic Edition

A single print sheath with a hinged flip-top lid that gives ordinary chewing gum bottles a clean, minimalist look. No assembly, screws, glue or tools required. Please don't scale this model. The snap fit is tuned to the standardized…

Downloads
9
Likes
11
Rating
0
P
PrintablesFreshdonkikong

Yarn holder/dispenser/Garnhalter (Salamander Edition)

This yarn dispenser consists of 3 parts. The parts can only be printed on a large 3D printer (e.g., Prusa XL). The salamander designs are recessed into the surface by just a few hundredths of a millimeter. Therefore, they can be printed…

Downloads
5
Likes
4
Rating
0
P
Printablesxro

Folding ruler Meterstick Gliedermaßstab Dispenser

This was a lot of fun to design and print :-) After some friends from metalab visited realraum a while ago, they improved our space by adding a few small shelves („Regal“ in German) and labeled a lot of things as “regalraum” which is a…

Downloads
4
Likes
3
Rating
0
P
PrintablesWired6785

Tiger Boston - soapdispenser drip tray

A driptray for Tiger Boston soapdispenser. Prints quick with PLA. It is a bit tight to the wall, but that makes it stick very well and keeps the dispenser more stable.

Downloads
2
Likes
0
Rating
0
P
PrintablesDeltaprints

Modern Tea Organizer, Tea Dispenser

This modernly designed tea organizer and tea dispenser keeps your favorite types of tea organized and safe. The standard dimensions are 210mm x 85mm x 170mm. The tea dispenser is designed for all common tea packs. About the print…

Downloads
20,677
Likes
7,059
Rating
4.83
P
PrintablesThreeD-Michael

Blade Dispenser for Bed Scraper XL

This is a useful Blade Dispenser for my new Optimized Bed ScraperXL with replaceable blades. The dispenser holds 44 blades and has a hook to which the bed scraper can be attached. Double-sided adhesive tape can be used to attach the…

Downloads
13,935
Likes
2,988
Rating
4.91
P
PrintablesI. Ulianych

Egg dispenser for 10 eggs

Egg dispenser hold 10 eggs from S to L sizes (up to 65x45mm). Print recommendations: Filament - PLA, PLA+ Layer 0.2mm, 2-3 Walls Infill 10-15% With Brim 5mm The Support is not important.

Downloads
11,965
Likes
2,757
Rating
4.74

Eggs rotary Dispenser + slow down

Egg dispenser. Add model for bed 256x256x256 type bambu. 3110_Bambu dispenser eggs.3mf New model with solution break eggs https://www.printables.com/model/1223603-2025_dispenser-rotary-egg New model 2025…

Downloads
11,319
Likes
1,830
Rating
4.79
P
PrintablesMintax

Custom Nespresso Capsule Dispenser

Inspired by commercial products and self-made solutions, I decided to design and print my custom version of a Nespresso capsules dispenser. It wanted it to be nice to look at, functional and simple at the same time. What you see here is…

Downloads
11,168
Likes
2,104
Rating
4.92
P
PrintablesPedro Alc.

Euro can dispenser

17/08/2023 Update: NOW YOU NEED LESS SPACE. I have lowered the inclination of the upper ramps by one degree, resulting in a maximum design height of only 139.089 mm. Hello there! I create this model of can dispenser because i couldn't…

Downloads
10,415
Likes
4,581
Rating
4.71

Drink dispenser (different models)

Drink organizer. New model 2024 https://www.printables.com/es/model/781648-2024-stackable-rotary-drink-dispenser New model 2023 https://www.printables.com/es/model/377642-2023-stackable-rotary-drink-dispenser And modular model :…

Downloads
10,350
Likes
6,381
Rating
4.66
P
PrintablesEnigma

Drink can dispenser

Inspired by similar-looking can dispensers, but built from scratch to actually fit cans I use and hold more cans (accommodates around 11-12 standard-size cans). The parts are split to allow printing on a Prusa Mini, with joints hidden as…

Downloads
10,164
Likes
4,939
Rating
4.74
P
PrintablesORM

Battery holder for AA + AAA, wall mounted dispenser

This space saving battery dispenser is designed to hold both AA and AAA batteries, 12 AA and 13 AAA. There is a Voronoi pattern on the sides of the magazine to make it easy to see how many batteries are left. The drawback of this design…

Downloads
9,363
Likes
2,423
Rating
4.82
P
PrintablesElektroarzt

Flux and Solder Paste Dispenser

This is a remix of the cool Thingiverse project of mordaha that I optimized for my requirements in the following terms: used 2x M3x20 screws as lever axles instead of 1x M3 screw and 1x filament levers have a bit more space to each other…

Downloads
8,009
Likes
3,243
Rating
4.91
P
PrintablesDarius V

Dishwasher Tablet dispenser

Update: 2025-11-13: Added a remix for a laser-cuttable model. https://www.printables.com/model/1479675-dishwasher-tablet-dispenser-laser-cut-version Dishwasher Tab Dispenser – Sturdy & Simple A no-nonsense, ultra-durable 3D-printed…

Downloads
7,903
Likes
2,626
Rating
4.71
P
PrintablesFruitieX

Gridfinity magnet stackable battery dispenser

This Gridfinity battery dispenser fits 10 AA / 13 AAA batteries per 2x2x1 Gridfinity block, plus one dispensed battery. If you need to store more batteries, you can print another block that feeds batteries into the dispenser block…

Downloads
7,578
Likes
1,653
Rating
4.22
P
Printablessui77

Nutella Jar Candy Dispenser

[Build video by @Ronny - thx! Don't forget to like & subscribe his channel 😉] BOM: 750g, 825g or 1000g Nutella glass jar (or get the 350g adapter from clausriber ), small candies like chocolate ( not peanut ) m&m's or skittles. Create…

Downloads
7,266
Likes
1,975
Rating
4.9
P
PrintablesMSBstudios

The Twin-Track Gravity Egg Dispenser (Higher Capacity Remix)

A major capacity upgrade for your egg storage: This is a Double-Track Remix of the popular egg dispenser. Based on the concept of a single gravity-feed egg trough, this design doubles the number of tracks, allowing you to store and…

Downloads
7,095
Likes
1,987
Rating
4.81
P
PrintablesDobainier

Moai Tissue Dispenser

I loved this tissue dispenser from Crooked_Noozle : Moai Tissue dispenser by Crooked_Noozle - Thingiverse But it was too big to fit in my P1P and I wanted to print it in one piece. There was also the remix from Diggle ( Moai Standing…

Downloads
6,341
Likes
1,823
Rating
4.96
P
PrintablesR3D

Cotton Swab Dispenser with Lid

This sleek yet simple Dispenser keeps your Cotton-Swab's clean and ready for use. Rather simplistic on the outside, the internal geometry provides proper swap-feeding. Please keep in mind, that the swabs have to be pushed down a little by…

Downloads
6,105
Likes
1,976
Rating
4.86
P
PrintablesDema_Design

Multi battery dispenser

Printable in PLA Layer height 0.3mm No supports Sorry for the photo on the cover which unfortunately does not correspond to the .stl model because the latter has been improved. I still hope you like the model :) Changelog : Multi battery…

Downloads
5,960
Likes
716
Rating
4.9
P
PrintablesDevilinside

Egg Dispenser (Eierspender)

Hallo Das ist meine Version eines Eierspenders. Es passen etwa 16-17 normale Eier rein. Es hat auch Platz für grosse Eier! Einfach zusammenkleben, die 6 Bolzen nicht vergessen. Masse: 282mm x 180mm Hello This is my version of an egg…

Downloads
5,587
Likes
745
Rating
4.6
P
Printablesgkmakeit

Tea bag dispenser

Mounting options. 1. Four 10x3mm or 3/8x1/8inch disc magnets. Put a small drop of super glue under each magnet. 2. Two #4 flat head wood screws don’t over tighten. 3. Double sided tape. 4. Command strips. Alternate each tea bag 180…

Downloads
5,581
Likes
2,246
Rating
4.91
P
PrintablesPeter Davis

Another Nitrile Glove Box Dispenser

While this is nothing new, I designed this to have the glove sizes indicated on the holder. For my purposes I am printing each one from a different color PLA. I was looking for one that was a direct wall mounted option, one-piece…

Downloads
5,281
Likes
1,851
Rating
4.92
P
PrintablesCueBall909

Can dispenser (12 cans, low filament)

New version for Jan. 2024! This model previously used alignment dowels, which were fussy and required more print time. They also weren't very strong, since they were printed with the layer lines at their weakest orientation. Those have…

Downloads
5,140
Likes
1,464
Rating
4.94
P
Printablesfns720

FIFO battery dispensers for AA/AAA/18650 batteries

I have designed these dispensers to use my batteries in first in - first out order. You can stand these up on the table, or hang up using a standard 4 mm countersank screw or attach their back to anything using glue or 3M's Command Tape…

Downloads
4,254
Likes
560
Rating
4.99

Screw-in Mason Jar Candy Dispenser

Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Easy to print and Assemble Mason Jar Candy Despenser. Only two parts to print, prints with or without supports. Uses one M4x20mm (or similar) screw to attach the knob. Sized…

Downloads
4,113
Likes
1,469
Rating
4.9
P
Printablestoaster

Egg Dispenser

It's ~40cm long in total, which seems to be the typical fridge depth. It works, mostly. I did model it from scratch, specifically to adjust the tile angle and fiddle with the supports. Sometimes they rotate while falling and jam, not sure…

Downloads
3,957
Likes
967
Rating
4.5

Helical and rotary Eggs dispenser

New helical model without supports. Helicoidal eggs dispenser approx 15 units of XL size, maybe 16/18 of other sizes. Optimized model to do it without supports and redesigned (recommended) A model with supports is also left, but it is…

Downloads
3,793
Likes
433
Rating
4.68
P
PrintablesFabioGhiro

Battery Dispenser AA + AAA

A useful and cool battery dispenser for AA and AAA!

Downloads
3,764
Likes
512
Rating
4.87
P
Printablesmhparsons

Beverage Can Dispenser-12 oz

UPDATE 7/27/24: Made a number of changes: Added a “Full” version of the 5-can model with Covers Added covers with slot in the front to make it easier to remove the cans in the top dispenser. (Thanks to @Justnice980 for the idea!) Renamed…

Downloads
3,674
Likes
1,398
Rating
5