Arduino Uno DMX Shield, case
A very simple case for an Arduino Uno with a DMX shield
- Downloads
- 148
- Likes
- 7
- Rating
- 0
Counting matching models…
A very simple case for an Arduino Uno with a DMX shield
Made this to enclose my DIY Open DMX. It will be used to run my MiniLED moving heads from eBay. USB RS-485 to DMX You can buy this here! https://www.makexyz.com/store/usb-rs-485-to-dmxxlr-case-95eda30fbea0a5ab0e2d973d72049946 Print…
Diese Box in eine DMX Strecke zwischenstecken und die Lampen für einfache anwendungen per WLED steuern. Folgende Parts wurden verbaut: ESP32-S3 Mini / Zero SN75176 Neutrik XLR Einbau NC3FAAH NC3MAAH Die komponenten wurden mit dünnem…
This box is for housing a DMX or XLR socket and mount it to a wall. Print with supports.
Adapterplatte zum Tausch einer Schuko-Einbaudose gegen eine Kaltgerätebuchse. Passt zb. für DMX Kabeltrommeln usw… Lochabstand: 38×38
FrSky Tandem TDMX dual-band receiver Case (new version, not soldering required)
An adapter to replace multicore by sending it over cat7 network cables
In the photo I printed I used PLA to test it quickly before installing, but DO NOT USE PLA to print this for yourself (it will soften in the car when it gets hot). Use PETG, or any material that will be okay with hot weather. I printed…
It's made for the USB RS-485 converter with FT232RL + SN75176. The XLR plugs are from AliExpress. I simply glued the module into the case, and the XLR plug is secured with 2mm screws. The lid is also secured with 2mm screws. Links: XLR:…
This is Mover3D. A 3D printed, moving light, using the industry standard DMX-512 communication protocol for lighting control. Thus, it can plug in to any standard lighting control console, creating the ultimate lighting desk toy. Mover3D…
Hi there! Recently I build a Mist-Stream Deck from Thingverse, and I was thinking about getting this a little bit more into the light-design corner. I finished the case and atm I am printing it so see if it fits my needs. (It is my first…
I have a cheap unbranded DMX controller which seems to be a common item under various names. I wanted to give it colour-coded buttons for scenes, fixtures and the other functions, and also Red, Green and Blue sliders for the relevant…
This is a small enclosure for the Enttec USB to DMX widget ( http://amzn.to/2GkIcdC ), these adapters can be bought quite cheaply without a case, this 2 part 3D model solves that. The DMX module fits snugly inside and the top pushes into…
These are tools to help with the new ETC Clamp style DMX connectors. Originally designed to work with the Hubble HXTP25 Premise Hand Termination Aid. It consists of a ring that goes on the index finger of your non dominate hand and a…
a xlr/dmx tester that is made out of 2 parts the one with the battery and switch (this one) and the other end with the LEDS. when you want to check if a cable is good you connect both ends and turn it on. when te 2 leds light up it is…
Breakout box for four DMX signal lanes from Cat-cable. This box is specifically designed for DMX (no shielding, only outputs) with 3 pin and 5 pin per signal lane. All locking hinges are flat to housing outlines. For assembly you need 8…
I wanted a nice and rugged enclosure for a Wemos D1 Mini that can control DMX fixtures via ESPHome/HomeAssistant and does not have to be powered directly from the ESPs USB port which breaks easily. So i created this box which holds a cut…
These are supports for a bridge for slot car tracks or train tracks. These are wide at 120mm across and range from 15mm to 60mm tall. These are quick to print with just 5% infill and 4 walls. Enjoy! Print Settings Printer: ZYLTech Gear v3…
Remix to take an Neutrix XLR plus added features so the PCB stays in place without needing glue. Printed with a 0.6mm nozzle with 0.3mm layer heights in PLA
I wanted to attach the DMX Artnet Node in such a way that I could remove it at any time. So this is a tray which is fitted with M3 threaded inserts from below and the device can simply be retracted from above. The tray fits so well that…
Dieses 3D-gedruckte Gehäuse im Vintage-Synthesizer-Design verpasst deinem Teenage Engineering Pocket Operator nicht nur einen coolen Look, sondern bietet auch zusätzlichen Schutz und ein angenehmeres Bediengefühl. Ideal für Live-Sets,…
I created this housing for a minimal size RDM/DMX-Splitter for my toolcase. The housing containst this pcba and is powered by USB-PD with 12V (I use these trigger pcbas). Due to size restriction the cables need to be soldered on to the…
This print is a very specialized way of organizing something incredibly specific ;-) I have some DMX-controllable LED light trees that I use when I'm hired to run lights for various productions (theater, concerts, etc). The lighting is…
Držák a pomocník pro pájení konektorů XLR na kabely doporučuji tisknout z co nejvíce teplotně odolného materialu DMX 5pin XLR verze
Držák a pomocník pro pájení konektorů XLR na kabely doporučuji tisknout z co nejvíce teplotně odolného materialu DMX 3+5pin XLR verze
I searched the shops for a slim LED Pole mit RGB in the back and white in the front an DMX-control, couldn't find one, so I built it myself. Design goals: slim, low-key vertical light bar with RGB to the back and white to the front.…
After three years of almost daily use, I ended up wearing out the connector and the belt clip for my DMXcat. I couldn't find a replacement belt clip available so I just modeled my own in Fusion. It took three revisions but I am happy with…
These are tools to help with the older ETC orange weidmuller style DMX connectors. Originally designed to work with the Hubble HXTP25 Premise Hand Termination Aid. It consists of a block that hold the female plug that goes into the Hubble…
I wanted a way to connect into my t2c/t4c lights and at the time, Aputure did not have any connector cables available. I created this little box as a way to solve that issue. DMX/XLR Connectors:…
Mounts the Showtec NET-2/3 Pocket DMX interface securely. Recommended print settings: PETG, 20% infill, no supports (larger overhangs on the mounting holes). To mount: either detach the included metal side panels, or mount the brackets on…
model je optimalizovaná pro tisk bez podpěr, u starších podložek doporučuji límec 2mm
https://github.com/Linu-Tec/DMX-Luefter Benötigte Bauteile: 4x Taster 6x6mm (https://funduinoshop.com/bauelemente/taster-und-schalter/taster/taster-sortiment-10x20-stueck-6mm-basis) 3x 1/4W 6,8K Widerstand…
it is NOT PERFECT but is it ok. i dont use the ethernet ports but the dmx instead. one terminal is a bit hard to get a wire in but is it OK :) please remix and make it better!!
🏆 Sobre el Diseño ¡Celebra el mundial en México con este exhibidor conmemorativo para tus monedas! Diseñado específicamente para destacar y mostrar tu colección de monedas bimetálicas especiales de la Copa del Mundo 2026 , integrando un…
I was in need of an enclosure for my LED Controller and couldn't find anything that matched this particular device. I've seen them out in the wild before so I'm sharing my work for those that also use this cheap yet effective device.…
This sleeve/cover fits specific ArtNet/DMX controller from AlIExpress. There are other models. Please pay attention.
For my self-made ESP ArtNetNode I have chosen the Hammond 1455J as a case. The PCB was designed to fit exactly into this case. In order to give access to the interfaces and to be able to mount antennas, I modified the bezels of both sides…
I made this lamp for a friend who is doing light technician as a hobby. The base model came from Hunyuan 3.1, than I added details like the cutout for the light bulbs. Final Size: About 40cm, good for a desk lamp. Building: 1. Print the 3…
Just a simple DIN mount for the DMX4ALL ArtNet-DMX-Universe_DR_1.1 Idea of the DIN mount is a combination of more DIN mounts on this site! Category: Electronics
To have an easy attachment to my DJ booth and the possibility to release/remove my self-made ESP ArtNetNode when needed I created this model. It was designed to fit the Hammond 1455J case which houses the ESP ArtNetNode. The case can be…
Print with 0.24 layer, 7 walls and supports on out of a durable material, i recommend at least PETG, printed mine out of PBT-GF the mount uses the original screw and nut from the turn light mount pictured bellow Instalation unscrew the…
DMX – Keychain A compact DMX keychain for the fans. Design Highlights Reinforced Loop: Extra-thick attachment point to ensure the keychain survives daily wear and tear on your keys, clothes or gear Low Material Cost: The keychain uses…
I don't want to link neither ebay nor amazon but i basically got the "cheap" black metal xlr plugs, they're mostly sold in packs of 5 &10 The threads on the metal housing are m17x1.0 or at least they fit well enough. Since the cap and…
These allow a user to hook most par lights onto the supports of a drop ceiling, as well as to neatly route power and standard DMX cables simultaneously. They hook on with a bit of force, and can be taken off by bending one side of the…
I needed a box for 30 channel dimmer from SOH company ( https://eshop.soh.cz/stmivace/i431-dmx-30-led-dimmer-120a/30v-vcetne-indikace ) I printed it from PC/ABS as i needed higher temperature resistance, possible fire resistance (and i…
Simple holders for XLR adapters and the swisson dongle. Designed in 2 parts to make the item stronger, print the clip on its side and the holder the correct orientation. If you've a decent printer these will just slot together but you can…
Breakout box for four DMX signal lanes from Cat-cable. This box is specifically designed for DMX (no shielding, only outputs) with 3 pin and 5 pin per signal lane. All locking hinges are flat to housing outlines. For assembly you need 8…
I wanted a nice and rugged enclosure for a Wemos D1 Mini that can control DMX fixtures via ESPHome/HomeAssistant and does not have to be powered directly from the ESPs USB port which breaks easily. So i created this box which holds a cut…
I was in need of an enclosure for my LED Controller and couldn't find anything that matched this particular device. I've seen them out in the wild before so I'm sharing my work for those that also use this cheap yet effective device.…
For my self-made ESP ArtNetNode I have chosen the Hammond 1455J as a case. The PCB was designed to fit exactly into this case. In order to give access to the interfaces and to be able to mount antennas, I modified the bezels of both sides…
Neutrik NA style housing for USB to DMX conversion with generic converter board (FTDI clone). The shells hold the board in place while held together with the cover and an XLR socket. M3 sink head screws can used directly into the holes.
I needed a box for 30 channel dimmer from SOH company ( https://eshop.soh.cz/stmivace/i431-dmx-30-led-dimmer-120a/30v-vcetne-indikace ) I printed it from PC/ABS as i needed higher temperature resistance, possible fire resistance (and i…
I created this housing for a minimal size RDM/DMX-Splitter for my toolcase. The housing containst this pcba and is powered by USB-PD with 12V (I use these trigger pcbas). Due to size restriction the cables need to be soldered on to the…
NOTE: This design was made before I got much better at designing for rack mounted components. As such, it's a bit… quirky. I'm leaving it here AS-IS. Need a eDMX Pro on a budget? 3D print your own enclosure and convert a eDMX4 Pro Din.…
ONLY FOR THE PEOPLE IN CDMX THIS A BUNK BED FEET FOR THE GENERIC ONES ONLY YOU HAVE PUR SOME PROFESSIONAL GLUE ( RESISITOL 5000) ON THE FEET AND THE TUBE LAYER .20 OR .16MM FILL 20 OR 30% HONEYCOMB OR GYROID NO SUPPORTS I SUGGEST MADE IN…
I have this DMX512 2.4G receiver: Wiederaufladbar DMX512 Funk 2.4G Receiver Empfänger Controller für Bühnenlicht | eBay.de Powering this device on or switching the channel needs a pencil because the buttons are only accessible through…
Neutrik NA style housing for USB to DMX conversion with generic converter board (FTDI clone). The shells hold the board in place while held together with the cover and an XLR socket. M3 sink head screws can used directly into the holes.