Search results: drybox

Sort order

1,432 models

Wall-mounted drybox - with sensor

Article with build instructions: https://blog.prusaprinters.org/dryboxes-and-alternative-spool-holders-not-only-for-multimaterial-upgrade/ Material: Prusament PLA Galaxy Black

Print approx. €13.60–€16.62 excl. taxPreliminary estimate for one variant

Downloads
5,557
Likes
868
Rating
4.78
P
PrintablesLine Arc Line

PTFE (PC4-M10) Quick-Fitting Mod for Prusa Drybox

I wanted to use the Prusa Dryboxes with a PTFE-Tubing clamp instead of the plastic-flap gap that the dryboxes currently use. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox…

Print approx. €2.25–€2.75 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,034
Likes
156
Rating
4.93
P
PrintablesDombi3D

MMU2S filament buffer upgrade for Samla 22l Drybox.

With this upgrade you can keep your filaments dry and organized in a very small footprint. You do not need anymore the filament buffer. These designs should be compatible with all 200 mm Spools which has a round (Das Filament type) or…

Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant

Downloads
896
Likes
351
Rating
0
P
PrintablesSanka

Fixation for (un)original Prusa drybox on the Prusa enclosure

Fixation for (un)original Prusa drybox on the Prusa enclosure ( slim version available) You need some screw and nuts same one you use in a Prusa kit. 4x M3 nuts 8x M3x6 4x M3x12 -5 Spool rewinder adapter for MMU2S / MMU3 in (un)original…

Print approx. €3.09–€3.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
872
Likes
259
Rating
4.96
P
PrintablesRobert Schiele

Auto-Rewind Spool Holder for Drybox

I used to operate auto rewinder spool holders like https://www.printables.com/model/199248-narrow-double-stand-for-75mm-integrated-auto-rewin inside my dry-box. The challenge with those was that it always was kind of some fiddling with…

Print approx. €8.49–€10.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
796
Likes
204
Rating
3.5
P
PrintablesMordiev

Spool Skate for Rubbermaid 21 Cup Drybox

The 21 Cup Rubbermaid containers are getting harder to find and usually more expensive. Here is another great option from the community. https://www.printables.com/model/952313-filament-dry-box-with-rollers This is a spool skate that fits…

Print approx. €3.70–€4.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
723
Likes
135
Rating
4.78
P
PrintablesCMF

Filament Drybox for Auto-Rewind Spool Holder

A filament box based on the familiar hexagon style but redesigned for the integrated auto-rewind spool holder v5.6. by Vincent Groenhuis. This box fits the 75mm version. I designed this for my MMU2S to remove the buffer and keep all…

Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant

Downloads
634
Likes
115
Rating
5
P
PrintablesGrzegorz Z.

BallBearing spool holder for (Un)orginal Prusa Drybox

I didn't like the friction of the steel bars, it was kinda hard to spin the spool even by hand.. So here is my mod: ball bearing spool holde r for (un)Orginal Prusa Drybox. The mount holes are for original , 18mm, bars. There is a version…

Print approx. €4.16–€5.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
615
Likes
110
Rating
4.87
P
PrintablesPhil Caruso

Auto-Rewinder for Ultimate Filament Drybox

This Auto-Rewinder for Ultimate Filament Drybox combines modified versions of parts from several filament spool auto-rewinder models to provide automatic filament spool rewinding in @GunplaMark 's outstanding The Ultimate Cereal Container…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
574
Likes
122
Rating
4.8
P
Printablesscubam@xx

Magnetic Hygrometer Thermometer mount for Enclosure or Filament DryBox

This mount is for a round hygrometer thermometer from EEEKit which is very easily available on Amazon. The assembly is very easy with 4 pieces of 8x3mm magnets. Two are clipped inside the mount and two are attached to the plexiglass…

Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
502
Likes
117
Rating
4.92
P
PrintablesFrankee

Samla DryBox PC4-M10 PTFE fitting passthrough

Simple passthrough the drybox. You will need to drill a 10mm hole in the wall of the box. Screw the PC4 couplings onto the outer part. I probably don't need to explain anymore :) Material: PETG or PLA (but PETG is better) Layer: 0.2mm…

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
412
Likes
51
Rating
5
P
PrintablesBlubber

Drybox / Silica Box 20x40x80mm

Prints fast and with not much material. Holds enough silica to maintain a single spool

Print approx. €1.39–€1.69 excl. taxPreliminary estimate for one variant

Downloads
403
Likes
59
Rating
5
P
Printablesvintagepc

Auto-rewind Sistema 5L Drybox

A compact, sub $10 dry-box that is easy to open, portable, and can be removed and capped off for longer storage, compatible with Vincent's Auto-rewind spool mechanism. Print instructions I wasn't happy with the existing drybox offerings I…

Print approx. €3.08–€3.76 excl. taxPreliminary estimate for one variant

Downloads
350
Likes
87
Rating
4.88
P
PrintablesDanny B

Auto-Rewind Wall-Mounted Drybox

I like the straight design of Wall-mounted Prusa Drybox with humidity sensor. It lacks some features like auto-rewind and support for PTFE tubing though. So I added the following: Support for Integrated Auto-Rewind spool holder by…

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant

Downloads
303
Likes
64
Rating
5
P
Printablesrpgweb

Standalone Drybox with auto-rewind support

This remix adds an autorewind spoolholder INSIDE the standalone Drybox. You can then throw away the buffer that comes with the Prusa MMu module. I wanted the original “standalone Drybox with humidity sensor" to support a parametric…

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant

Downloads
300
Likes
72
Rating
4.86
P
PrintablesderQurps

IKEA Drybox Remix + Rewind

This is a remix based on the Complete IKEA Drybox Solution idea from crashdebug on thingiverse with some element ideas from Mihai's DryBox on thangs. All parts but roller_mount_inside and roller_mount_outside are done from scratch in…

Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant

Downloads
221
Likes
78
Rating
5
P
PrintablesERIK3DP

Outside Mounting Cover for Rosahl M-1J1R Electric Dehumidifier Membrane based Filament Drybox or Bambu Lab AMS

Please see my updated version of the Rosahl M-1J1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…

Print approx. €4.54–€5.55 excl. taxPreliminary estimate for one variant

Downloads
196
Likes
51
Rating
0
P
PrintablesMany24

IKEA SAMLA Drybox set with magnetic silica holder

Collection of all parts needed to make a drybox out of the famous IKEA SAMLA This collection contains: Pneumatic air fitting holder Magnetic box for silica gel PTFE tube plug Cover clips - made by Wookbert PVC pipe mount with outside…

Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant

Downloads
180
Likes
47
Rating
5
P
PrintablesApfelhobbit

Dessicant container for Ikea drybox (Samla 22L)

Stable box for the desiccant which goes under the spoolholders of the ikea drybox (Samla, 22L). https://www.printables.com/de/model/98008-drybox-for-4-spools-ikea-samla-22l-based/files

Print approx. €4.98–€6.08 excl. taxPreliminary estimate for one variant

Downloads
157
Likes
16
Rating
0
P
PrintablesNickyD20

Drybox Hygrometer Mount

A simple way to mount mini hygrometers without cutting holes in your drybox. This is a friction fit item, but some super glue would permanently secure it. I have found that some electrical tape on the contact points provides a very secure…

Print approx. €0.29–€0.36 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
141
Likes
22
Rating
5
P
PrintablesPuka

(Un)Original DryBox bottom seal with PTFE passtrough

I wanted to have a passtrough for the DryBox and add a nut holder for the middle screws. I used Passthrough_Cover.stl for the hole dimensions to get the fit just right. From the other files I got the dimensions for positions of holes and…

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant

Downloads
141
Likes
18
Rating
5
P
PrintablesRoman Huante

Prusa MMU3 Low-Friction Drybox Filament Buffer

Overview For a video tour of this tower setup, please visit this reddit post . In this video I explain how this quick-release system works along with some of the other upgrades that I have made for my Prusa i3MK3S+ with MMU3! (: This new…

Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant

Downloads
132
Likes
78
Rating
5
P
PrintablesMordiev

Desiccant block for Rubbermaid drybox

This desiccant block fits the rubbermaid 21 cup containers. It has strong walls so it can support 1 Kg spools easily. Print Instructions: YOU MUST FOLLOW THE PRINT INSTRUCTIONS!!! Print using ZERO top and bottom layers (REQUIRED.) Use 45…

Print approx. €4.59–€5.62 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
114
Likes
27
Rating
5
P
PrintablesMolot

Bowden connector holder for Ikea 365+ drybox

I couldn't screw my bowden tube connector into the box wall because wall was too thin. So here's my solution. Because superglue does not glue to the plastic Ikea 365+ plastic, I made this a two part. You drill a 14mm hole, put one at the…

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
105
Likes
17
Rating
0
P
Printables_KaszpiR_

Drybox Clip for Round Multibox 3.4L EAN 8694064003156

About Round Multibox 3.4L (EAN 8694064003156, produced in Turkey) with internal diameter of 22cm can be used as dry box for storing a spool of filament. It lacks seal and is made from elastic plastic so it needs tightening - that's why I…

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
100
Likes
14
Rating
5
P
PrintablesHarabi

Ikea Samla 22L - Drybox silica tray for ThomaS Spool Holder

When I had to take the silica out to dry, part of it was always stuck under the seal. So I designed a tray to make it easier to handle the silica. At first I planned a more robust one, but I was reluctant to use so much filament on it, so…

Print approx. €2.36–€2.89 excl. taxPreliminary estimate for one variant

Downloads
87
Likes
16
Rating
4.75
P
PrintablesAlvomane

Samla 22L Compact Drybox Mounting Frame | Montage Rahmen für Frantisek23s Trockenbox.

Update 05/23/2024: Now that Frantisek23 has further perfected his design , I definitely recommend his new solution and basically declare my remix obsolete. Since the EndRib_V1b Mini.stl model is no longer available from him in the course…

Print approx. €1.33–€1.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
45
Likes
12
Rating
0
P
PrintablesrojoPrint

Rubbermaid 21 Cup Drybox Base

This is a remix of @MysteryDough_5648 Filament Spool Stand to suit my needs (and maybe yours). Thankfully the original creator posted the .step file which allowed for easy remixing. The Rubbermaid 21 Cup container makes a good dry box. I…

Print approx. €5.91–€7.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
42
Likes
7
Rating
0
P
PrintablesCocacolas29

PTFE sealed grommet with PC4-M10 for DryBox

Needed a PTFE sealed grommet with PC4-M10 connection. @PeterMain model was well designed so I used it for my project. The connector and the nut are print in PETG For the seal, I used TPU A95, a cheap one from amazon.

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3
Likes
0
Rating
0

Spool holder and drybox for Enclosure V2 - with humidity sensor

This version of the spool holder is WITH hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Blog article: Drybox build instructions .

Downloads
18,696
Likes
4,874
Rating
4.74
P
Printableseds_3d_shop

Slim front side AMS (and Hydra) narrow side corners silica dryer pod/drybox with snap fit lids for Bambu Lab AMS

UPDATE 1.02.2024: Lids with Bambu-Logo handle for small and big AMS dryer pods The perfect-fit funnels for big and small silica buckets I think the silica boxes in AMS are simply brilliant, so the filaments can stay in AMS for a long time…

Downloads
13,525
Likes
751
Rating
4.96
P
PrintablesBram Elema

(Un)original Prusa Drybox

As of now, the (Un)original Dryer D2 is available. It is an improved version of this drybox, with many new features. Now supporting modular heating, filament weighing, and is much easier to assemble! Check it out here: The (Un)original…

Downloads
11,452
Likes
6,130
Rating
4.9

Drybox for Prusa Printer Enclosure V2 - without humidity sensor

This version is WITHOUT hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Article with build instructions:…

Downloads
10,924
Likes
983
Rating
4.64

Wall-mounted drybox

Article with build instructions: https://blog.prusaprinters.org/dryboxes-and-alternative-spool-holders-not-only-for-multimaterial-upgrade/ Material: Prusament PLA Galaxy Black

Downloads
10,205
Likes
4,633
Rating
4.36
P
PrintablesGunplaMark

The Ultimate Cereal Container Filament Drybox

NOTE: While still in use by a lot of people, this version of the drybox system has been deprecated in favor of the updated one here: My previous filament drybox model became more popular than I ever imagined, and after taking on a lot of…

Downloads
8,583
Likes
2,124
Rating
4.82
P
PrintablesGunplaMark

The Ultimate Cereal Container Filament Drybox - Official Remix

My Ultimate Cereal Container Filament Drybox has been out in the wild for a few months, and after some great feedback from all of you and continued use in my setup, I've decided to make a few official changes. The biggest change is a…

Downloads
6,060
Likes
1,255
Rating
4.82
P
PrintablesPrusa Research

Prusa USS Drybox printable accessories

Description These models are made to enhance your Prusa USS Drybox experience, bringing additional compatibility and expanding the range of options. Before you start, read the article, which contains all the important info. What can you…

Downloads
5,140
Likes
1,079
Rating
4.91

Standalone Drybox, spool holder - with humidity sensor

Next remix of Drybox for Prusa Printer Enclosure V2 - with humidity sensor. Print instructions You can place five pieces of this drybox on the top of the Prusa Printer Enclosure V2. Can be used as a standalone spool holder for Original…

Downloads
5,131
Likes
693
Rating
4.73
P
PrintablesExtrutim

Drybox | Cheap Filament Storage Box | Polydryer Compatible Dry Box

I wanted a Drybox that is as affordable as possible without compromising on features! There are already many designs out there that use the well-known cereal box as a basis, but none of them met all my criteria. I wanted to change that.…

Downloads
3,688
Likes
1,870
Rating
4.96
P
PrintablesSanka

MMU3 / MMU2S 5 Spools auto rewinder adapter for (un)original Prusa drybox / Repbox

This is an upgrade for users of MMU and who has (un)original drybox (also works with the Slim version). This system replaces the filament buffers. It's a project in development that I try to improve with the time, thanks for your…

Downloads
3,304
Likes
971
Rating
4.95
P
PrintablesDET-Man

Yet Another Drybox

Why Yet Another Drybox Design? I was looking for a storage solution for my filament, but the popular designs I found weren't right for me in terms of size or didn't meet all of my needs. I finally found some storage containers on Amazon…

Downloads
3,296
Likes
227
Rating
5
P
PrintablesAdam L

SpinCycle : Keep every spool dry, For Bambu X1 /P1P AMS and Print-from dryboxes

Update 2/19/2023: Added no-water-drops design for Top and the Default Jar Size per user comment/request (top/bottom text remains). Update 2/7/2023: Added a 12 mm-shorter version per user request. This model is designed to make storing and…

Downloads
3,267
Likes
733
Rating
4.92
P
PrintablesRen

Drybox for 4 spools (Ikea Samla 22l based)

Edit: I also tried a different approach here: Let's build...Drybox v2! by Ren | Download free STL model | Printables.com You can find many single parts, videos or blog posts regarding dryboxes. When I realized I have stringing problems…

Downloads
3,127
Likes
688
Rating
4.83
P
PrintablesKazmar

Filament Drybox Inomata-K Mk2

Using Remix as a reference, I created a model that does not require additional parts such as bearings, bolts, or shafts, and can be produced using only a dry box, PTFE tube, and a 3D printer. Requires 4x: 608 bearings 1x: PTFE tube Φ4mm…

Downloads
2,648
Likes
175
Rating
5
P
PrintablesPrusa Guy

Prusa Core One Printable Drybox

It is designed to fit perfectly into the right-side recess (where the spoolholder is located). This DryBox enables you to store your filament spools in a more controlled environment - don't forget to add silica gel into the DryBox for it…

Downloads
2,341
Likes
1,347
Rating
4.29
P
PrintablesTwotone74

Drybox made with IKEA 365+ 10,6l food container

English I originally published this drybox on thingiverse (thing nr. 3884699). It became quiet popular, so I decided to publish it here again (I will no longer publish any designs on thingiverse). If you need changes like e.g. equal…

Downloads
1,990
Likes
462
Rating
4.52
P
PrintablesRen

Let's build...Drybox v2!

I was thinking quite hard how to fix the issue some experienced, that not all types of spools slide nicely. I had the solution right in my hands all that time, I just didn't realize it before! Let's finally use all these old pieces of…

Downloads
1,877
Likes
415
Rating
4.69
P
PrintablesRoboMagus

Knurled PC4-M6 PTFE Drybox Feeder

This is a simple solution for a drybox filament feeder using the PC4-M6 bowden tube coupler. For assembly only a single 8mm hole is needed in your drybox for the filament feeder to pass through. Assembly of these parts does not requires…

Downloads
1,846
Likes
320
Rating
4.94
P
Printableswoelpi

PC4 drybox feeder with knurled screw-on cap (M10&M6)

I wanted an airtight PC4 feedthrough for my drybox, so i took some insperation from the RoboMagus solution and iterated to this solution. The cap is capable of sealing the whole feedthrough airtight, when it is not in use. I also added a…

Downloads
1,829
Likes
353
Rating
4.91
P
PrintablesBram Elema

(Un)original Prusa Heated Drybox

As of now, the (Un)original Dryer D2 is available. It is an improved version of this drybox, with many new features. Now supporting modular heating, filament weighing, and is much easier to assemble! Check it out here: Disclaimer: This…

Downloads
1,790
Likes
857
Rating
4.59
P

MMU2S Ikea Drybox

Stackable Ikea Samla Drybox and Spoolholder. You have an option of printing either just drybox for 2 spools, or spoolholder for three spools, or both. Dybox was able to maintain 16%-18% humidity in environment with in between 45% to 92%…

Downloads
1,765
Likes
141
Rating
4.75
P
PrintablesExtrutim

Drybox For Prusa XL / 3030 Extrusion

I've designed this drybox for the Prusa XL, of course it can be attached anywhere on 3030 aluminum extrusions. The drybox is opened via the red wheel with a 90° turn. It also holds the container for the desiccant, which could not be…

Downloads
1,589
Likes
508
Rating
4.95
P
PrintablestheStonefox

Modular Spool Drybox for Centauri Carbon 2

One of the biggest drawbacks of the CC2 is its open spool mount design. While the community has already created some great solutions, I felt there was room for a more modular approach; one that doesn’t rely heavily on additional…

Downloads
1,497
Likes
378
Rating
4.5
P
Printablestcosta

Modular & Minimal Filament Drybox (with no bearings required option)

Update (27 March 2025) - Uploaded a new thread only (no sides) universal spool holder axel at a user's request. This allows you to use two female ends and adjust to any size needed. See the "Drybox Axel - 50mm Universal Threaded (Male,…

Downloads
1,416
Likes
311
Rating
4.95
P
PrintablesDukeCGN

Quick PTFE Filament Tube change system for dryboxes

In order to change the filament quicker and more comfortable I made some small and easy to install parts in Fusion 360. With this you can change from one colour to to another by simply changing the PTFE tube adapter and close the box with…

Downloads
1,213
Likes
201
Rating
4.96
P
PrintablesAntipode

Knurled PC4-M10 PTFE Drybox filament pass through

This is the version of the drybox feeder insert for using PC4-M10 fitting with the M10 x 0.9 thread. For the PC4-M6 version get the original design by RoboMagus (linked below). This pass-through adapter for a makeshift drybox solves…

Downloads
1,202
Likes
203
Rating
5
P
PrintablesRoboMagus

Drybox humidity sensor mount

This is a simple humidity sensor mount for your filament drybox. I've created this to fit the IKEA samla boxes, but should work fine with any transparant storage box. It is designed around those cheap circular LCD temperature / humidity…

Downloads
1,164
Likes
188
Rating
4.92
P
PrintablesFreshPrints

Anycubic Drybox Filament Sensor Bracket v4 PC4 M10 Reverse Bowden Kobra 2 Max / Kobra 2 Pro / Kobra 2 / Kobra 2 Plus / Kobra 2 Neo

Made a filament sensor bracket so I can use my dryer box with the printer using M10 fitting. Added Supports arms to keep runout sensor in align. solve problem sensor would easily twist and turn and put filament in a bind. Print…

Downloads
1,144
Likes
128
Rating
5
P
PrintablesExtrutim

Drybox To Fit Polydryer | Fully Printable

I thought that instead of buying an additional box, you could simply print a better one yourself! My box is not only compatible with the Polydryer, unlike the original box it is also stackable, has an improved closure, a slot for labeled…

Downloads
1,123
Likes
478
Rating
5
P
PrintablesHaasi

Prusa Core One Drybox upgrade

5 of six walls are already there, lets add one more. Dont forget to seal the corners an the hole on the printers frame. Silicone should be a good choice. Also available : -a ring to stick a led strip on. For lighting the spool from…

Downloads
1,117
Likes
751
Rating
4.93
P
Printableschwiede

Filament drybox inlay

The Ultimative Filament Drybox Introduction So... I saw those filament dryboxes. Of course I'd wanted to design one by myself so badly… And here it is! Let me introduce an overengineered but cool looking drybox spool stand! Does it print…

Downloads
1,111
Likes
889
Rating
5
P
PrintablesMathieu

Aluminum Tube Substitute for Filament Drybox

For printing with highly-hygroscopic materials such as water-soluble supports or just for regular printing of PETG or ABS exposed to moisture, a drybox is a key way to prevent fast deterioration of materials. For the instructions on the…

Downloads
1,107
Likes
121
Rating
5
P
Printablesmp42

Drybox filament guide using PTFE tube

Just print with normal settings (0.20), PLA or PETG would be fine. The only other material needed is a piece of standard PTFE tube. Added sliced files for PLA and PETG

Downloads
1,071
Likes
175
Rating
4.96
P
PrintablesBilliam

Drybox (wall mountable)

This a is a work in progress To Do: • Push-to-connect fitting threads are difficult to align and thread when printed at an angle. May depend on your printer. Changelog: 2019-08-30 : Fixed 5/16" threads on printed nuts 2019-09-01 :…

Downloads
1,057
Likes
261
Rating
5
P
PrintablesTaro Hayashi

A1 mini Mod for Filament Drybox Inomata-K Mk2

Heat or glue here as it will pull out if left in place.

Downloads
1,028
Likes
22
Rating
0
P
Printablesdr13st

Dyna Drybox / Filament Box 4L with Hygrometer Mount

This is a slight modification of a great Drybox made by Dynarun to add a hygrometer in the front. You could also use my universal drybox plug to make it airtight when not in use. Required Parts Print basis.stl from this project, and all…

Downloads
985
Likes
163
Rating
5
P
PrintablesMax Mustermann

DryBox Outlet

You need for one outlet: 2EA M3x4x5 threaded brass inserts 2EA M3x10 Cylinderhead screw 1EA M10 PTFE Tube fitting

Downloads
982
Likes
102
Rating
4.83
P
PrintablesLine Arc Line

Extended PTFE (PC4-M10) Quick-Fitting Mod for Prusa Drybox [V3]

This enables you to use the Prusa Dryboxes (not Wall-Mounted version) with a PTFE-Tubing clamp. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox using the same screws (M3…

Downloads
962
Likes
173
Rating
4.77
P
Printablesshayan_akbari

(Un)original Prusa Drybox (step file)

the step file of (Un)original Prusa Drybox created by @BramElema_470201

Downloads
950
Likes
114
Rating
5
P
PrintablesHerranz

IKEA 365+ 10,6l Drybox - 2 x 1Kg filaments rolls

A remix of Twotone74 drybox for the Ikea 365+ with equal rollers and a larger silica box/tray to put even more silica. As in the original model the max diameter of the spool is 200mm. Bill of Material: 8x 608 ballbearings (the one in the…

Downloads
924
Likes
124
Rating
4.67
P
PrintablesThomaS

Spool Holder Drybox - Ikea Samla 22L

This is an insert for the Ikea Samla 22L drybox to improve filament spool storage (not designed to print out of the box). The insert prevents the spools from rolling around and sitting directly in the desiccant (and therefore pulling…

Downloads
896
Likes
178
Rating
5
P
PrintablesParasitKegel

Polydryer Filament Holding Drybox Plug

Plug for securely holding the end of the filament spool when sealing the Polymaker Polydryer box opening. The plug does not protrude above the top edge when installed in the lid. Compatible with 1.75mm filament. The hole in the plug end…

Downloads
892
Likes
215
Rating
4.93
P
PrintablesPyry

Filament Spool Drybox – Ikea 365+

I designed this drybox with optimal space usage and minimal printing volume in mind. It uses practically all the available space inside the Ikea container. It can hold larger filament spools than other Ikea 365+ dryboxes I have seen. It…

Downloads
878
Likes
181
Rating
4.84
P
PrintablesSwoosh

Single Spool 4L Drybox

4L filament drybox Background The idea was to create a drybox with as few modifications to the food container as needed where the spool can be changed with ease. Idea and Inspiration This is a collection of things I've found to work well…

Downloads
875
Likes
150
Rating
4.11
P
PrintablesDave G.

Prusa USS Drybox and OpenPrintTag Parametric Spool Adapters

These are dual-purpose adapter sleeves that: Allow you to use third-party filament spools in your Prusa USS Drybox without them dragging on their rim Provide a reusable carrier for mounting Prusa's OpenPrintTag NFC tags on third-party…

Downloads
715
Likes
220
Rating
5
P
Printablesgoodjobswe

Samla filament drybox

Several 3d printing filaments are hygroscopic, meaning they absorb moisture from the surroundings which can lead to poor surface finish and a clogged nozzle. Depending on where you live and what material you are printing with, moisture…

Downloads
687
Likes
199
Rating
4.86
P
PrintablesGMagician

Drybox Ikea 365+ 10.6l & autorewind (and not) spoolholder

I like Ikea 365+ box because it's sealed but I also like autorewinders for MMU2, then here is my mashup. Up to 2 spools, max 63mm width, can be used simultaneously and if no springs are used into hub...this can be used as a normal spool…

Downloads
662
Likes
99
Rating
4.5
P
PrintablesRobin

IKEA Foodbox Drybox Remix

This is a remix of this model by crashdebug from thingiverse. I changed the inside roller mountings to 10mm diameter to fit 10mm aluminium rods instead of M8 threaded rods and constructed new outlets with only 3 screws and PC4-M10…

Downloads
646
Likes
218
Rating
4.86
P
PrintablesDaHouzKat

DryBox

Fully Printable Dry Box Spool Holder and Container (v3.0) I hope you enjoy printing and using this DryBox as much as i enjoyed designing it Features Fully printable on a Prusa MK4 Mountable on top OR inside the Original Prusa Enclosure…

Downloads
643
Likes
272
Rating
5

2kg Spoolholder Drybox

I originally wanted a 2kg spool version of the Spannerhands spool holder. After editing the original stls, I noticed that due to the increased dimensions the print was sagging. Therefore I rebuilt the original design, increasing stiffness…

Downloads
632
Likes
485
Rating
5
P
PrintablesGabe

Drybox PTFE Fitting Adapter (both M10 & M6)

This is a way to allow printing using a filament while it is still in a drybox. Just drill a 1/2in (~13mm) hole in the drybox and put this in it. There is a version for both the M6 and M10 PTFE push fitings.

Downloads
628
Likes
123
Rating
4.88
P
PrintablesSteveT

Filament Drybox (the best-of-the-best components)

I wanted a drybox that would keep my filament dry during the humid months and I really wanted to eliminate the MMU3 buffer that takes up tons of space and keeps feet of filament constantly exposed to the humidity. After researching this,…

Downloads
614
Likes
227
Rating
4.89
P
Printablesidesire90

IKEA 365+ Drybox Spoolholder (also for smaller Printers)

>Version for 1 Spool< >Version for 3 Spools< IKEA 365+ 10,6l Drybox Spoolholder for 2 Spool, with space for Silica / Desiccant and a Xiaomi Miija Bluetooth Thermometer. Update 2024-04-01 Added a splitted in 2 parts version for smaller…

Downloads
614
Likes
98
Rating
5
P
PrintablesMartin_au

The Shark Filament Buffer and Drybox System (V6)

The Shark filament dry box system has been through many iterations, and is finally at a a stage I'd say is “finished”. It's named because of the shark fin shaped filament guide that makes it possible to load filament easily. The main…

Downloads
613
Likes
405
Rating
4.57
P
PrintablesDG-RoboTek

Core-One Drybox

I removed the back of the box to make space for the large Prusament spools. There is a groove for some silikone sealing buyable at amazon: https://amzn.eu/d/89xxlku and https://amzn.eu/d/72q73KV I also added some slots for better…

Downloads
552
Likes
187
Rating
4.67
P
PrintablesJohegy

Drybox IKEA 10.6L MIX

I wanted the silica gel container from one design and the adjustable dual spool holder from the other, so I mixed the two excellent designs linked below. Modifications Modified the silica gel container to be the spacer for the spool…

Downloads
545
Likes
96
Rating
5
P
PrintablesScott

USS Drybox - Silica Beads Basket

Silica beads holder/basket meant to replace the little bag that came with the USS Drybox. PARTS: Main body Lid Stand (to easily pour silica beads in the basket) Strips and arrow (if you don't have multicolor printer: meant to be printed…

Downloads
543
Likes
210
Rating
4.92
P
Printableseurad

Drybox (below or above printer, parametric)

I made this to feed the filament up from below an IKEA Lack Enclosure and hopefully keep the filament dry. It also works to feed it top down by rotating the PTFE coupler 180°. I startet out by remixing the Parametric Enclosed Stackable…

Downloads
540
Likes
74
Rating
5
P
PrintablesBoris

Drybox Spoolholder for Original Prusa Enclosure - V2

Don't mess around with an external Drybox to print with your moisture sensitve filaments like TPU, PETG and Nylon. Print one yourself, that fits inside the Original Prusa Enclosure! The Drybox is very easy to make, you will reuse your…

Downloads
524
Likes
228
Rating
4.29
P
PrintablesJurek S

Drybox for Prusa Printer Enclosure V3 - with humidity sensor Optimized

I optimized this file " https://www.prusaprinters.org/prints/4583-drybox-for-prusa-printer-enclosure-v2-with-humidit " so that you can print them in two different colours. :)

Downloads
519
Likes
27
Rating
5
P
Printablesgdrag

PC4-M10 PTFE fitting passthrough for drybox

Fits M10x0.75 fittings. Hardware required is 4xM3 socket head bolts and matching hex nuts. Added a STL for a TPU/TPE seal if the surface isn't even but I haven't used it.

Downloads
483
Likes
97
Rating
5
P
Printableselevensies

(un)original Prusa Drybox Auto Rewinder Axle Remix

Don't use a brim. It will prevent the axle from fitting easily through the bearing in the auto-rewinder. There is not a ton holding the print to the bed but I haven't had any problems with the part popping off during printing on the Prusa…

Downloads
482
Likes
80
Rating
4.89
P
PrintablesCrazy3D

Strong Ikea Samla 22l Clip for DIY drybox

Remix of IKEA Samla Clip for 45/65l Box to fit to the 22l Box which is enough to store three to four 1kg rolls of filament. Redesigned it that it fits tight and can be assembled very easy and click on effect. I used eight of them and a…

Downloads
480
Likes
68
Rating
4.76
P
Printablesdigoz

Single spool 4L drybox (fits Prusament 1Kg)

Check Swoosh's print for the full details. For 4L dryboxes: Chef's Path or GoMaihe (they are equivalent).

Downloads
475
Likes
66
Rating
4.5
P
PrintablesBuildX

#0022 [Remix] Spool Holder and Drybox for Enclosure V2 - with alternate filament exit ports

I like this drybox, except I find that the slit for filament exit opens up the drybox too much to the environment and reduces the life/duration of the desiccant - and it stops working and needs to be renewed (the RH rises back to match…

Downloads
465
Likes
48
Rating
5
P
Printablesquiet

M10 screw for (Un)original Prusa Drybox

M10 screw designed for (Un)original Prusa Drybox for F beam in standalone version. The screws were aligned with the holes in the F beam. They prevent air circulation when the standalone version is not used. Print settings: Recomended PETG…

Downloads
465
Likes
57
Rating
5
P
PrintablesFrantisek23

Samla 22L - All-in-One - Compact Drybox, Silica gel container, MMU2 buffer, Storage, Auto-Rewind for 4 standard filament spools

Hello, I have been using my Samla 22L - All-in-One - Compact Dryboxfor for more than a year. The operation is still problem-free. Now the time has come to add silica gel trays and small improvements. I incorporated the comments and here…

Downloads
458
Likes
176
Rating
4.6
P
PrintablesChris1985

Rollers for (Un)original Prusa Drybox

For a complete roller, you need to print the roller_wall.stl two times and the bearing_extension.stl four times. Additionally, you will need 4 608zz bearings. Simply put the bearings on the shafts of the roller walls and attach the…

Downloads
458
Likes
72
Rating
4.79
P
PrintablesKaminoKGY

Marsgizmo Drybox Filament Bunker V3 Remix

To avoid using hydrometer (and batteries) I remixed the Filament Bunker V3 from MarsGizmo. Here is my video about it : or Dry Box IKEA 2 spools: https://youtu.be/KPjKM7GRW38 👉 Dry Box: https://amzn.to/3pcEmeO 👉 Ball bearings Amazon:…

Downloads
447
Likes
64
Rating
5

True Universal Drybox

Makes swapping filament in a dry environment super easy. No more packing / unpacking spools when switching filament. A drybox is needed for filament because most 3D printing filaments are hygroscopic, meaning they absorb moisture from the…

Downloads
444
Likes
375
Rating
4.67