Search results: elite

Sort order

1,259 models

P
PrintablesSnares

Dark Souls - Elite Knight Figure

Recommend printing facing up with organic supports. Have tried many times to get this looking nice on FDM; no problem now with organic supports. I split the figure and base for easier printing. All credit to the amazing ‘solid’ on…

Downloads
2,219
Likes
277
Rating
5
P
PrintablesConnorPrints

Nerf ELITE Ammo Can

I have changed to fit elite darts and have a more secure lid and hinge. I would recommend printing with 0.2 mm layers.

Downloads
1,362
Likes
398
Rating
5
P
PrintablesERiK004

Scope NERF Elite 2,0 & 1

Sniper sight designed for Nerf mods tactical rails. Here installed on a Nerf Commander elite 2.0 , an economical solution to get an over-equipped nerf by paying only a small sum! (only 299 kcz here ) The model prints with a support, but…

Downloads
880
Likes
130
Rating
4.75
P

Oculus Quest 2 Elite Link Cable Clip

Snaps firmly onto the rigid arm of the Elite Strap and holds the Oculus Link cable. The Link cable can be removed without removing the clip. Print instructions Print on one side; brim recommended for improved bed adhesion.

Downloads
852
Likes
89
Rating
4.67
P
Printablesonus

Vertical Stand for HP EliteDesk 800 (G2 - G6)

Another brilliant way to take up even less space on your desk with your hp elitedesk 800! [works on G3 but should work on G2-G6 – lemme know if otherwise] Enjoy! ***Edit*** I've redesigned it from the ground up. it now uses less plastic…

Downloads
298
Likes
27
Rating
4.75
P
PrintablesBarryFujimori

PS5 PULSE Elite Wireless Headset Hanger Stand

A nice and simple stand for your PS5 PULSE Elite Wireless Headset charger. It's a design optimized for 3D printing. No support material required. Several materials can be used for printing; PLA and PETG are recommended.

Downloads
226
Likes
24
Rating
1
P
PrintablesSachmer

Stand for HP EliteDesk 800 G8 SFF

I have printed this stand in PLA. To save some time, I used a layer height of 0.3 mm for most of the print. However, for the first 5 layers, I used a layer height of 0.2 mm to ensure a better adhesion to the bed. I also used an infill of…

Downloads
190
Likes
13
Rating
0
P
PrintablesJoseJacobUK

Fanatec CSL Elite P1/WRC/BMW Wheel 12mm Button

I wanted bigger buttons for my CSL elite P1 wheel like those on my Clubsport F1 when the caps are on so I designed and made new ones. These should also fit the WRC and BMW wheel which replaced the P1 in 2021 These replace the stock…

Downloads
188
Likes
27
Rating
5
P
Printablescamlordss

Elite snowball maker

This snowball maker will create compact and elite snowballs in a perfect shape and way, not too soft and not too compressed. This snowball maker will leave your opponents fill with snow WARNING: use supports and sorry for the parts…

Downloads
160
Likes
9
Rating
0
P
PrintablesNusselt

TourBox Elite Minimalistic Cover

This is a simple and minimalistic cover for a TourBox Elite! I made it to save it from dust and protect it while not in use. I printed mine in CF-PLA, but you can slice it in the material or color that you prefer. Included G-Code as a…

Downloads
155
Likes
7
Rating
0
P
PrintablesBunch8

Cooler Master Elite 330 Computer Case Power Button

Seems that a broken power button is common with this case and looking at the flimsy original I can see why. This simple replacement will keep my case out of the garbage. Hopefully yours too. I recommend printing in PETG for the…

Downloads
118
Likes
5
Rating
3
P
PrintablesLazlo

Vortex Elite (BTD6)

This model is kinda nuts. But I figure I should do something special for 24 (it's a special number for me i guess). It's a tiny model but has a decent number of components FYI. (this is technically Tier 2 - image from the wiki) I decided…

Downloads
104
Likes
23
Rating
5
P
Printableswolf gore

elite inner classic pro

Este cover decorativo fue diseñado específicamente para ser compatible con la serie Cooler Master Elite Liquid Series, ofreciendo una forma simple y efectiva de renovar la estética del bloque sin modificar su funcionamiento original. Él…

Downloads
63
Likes
35
Rating
5
P
PrintablesRealPrint

Shock absorber cover for Riese & Müller bicycles with rear swingarm (e.g. Homage & Delite) / Stoßdämpferabdeckung für Riese und Müller Fahrräder mit Hinterradschwinge (z.B. Homage & Delite)

Dieses Modell ist mehrteilig, damit weniger Stützmaterial benötigt wird. Neu (April 26): Längere Version für 56er Rahmengröße This model is multi-part, so less support material is needed. New (April 26): Longer version for 56cm frame size

Downloads
32
Likes
2
Rating
0
P
PrintablesTDM465

modified LimeLite v28 mount box

If you use the Coral Accelerator with the LimeLite and you use this (or the original) bracket, see the back-mount Coral bracket here https://www.printables.com/model/908221-coral-accellerator-bracket-for-limelight-bracket

Downloads
12
Likes
1
Rating
0
P
PrintablesSpekkie3D

1U rackmount for HP Elitedesk G3 mini and newer

This 19 inch 1U rackmount for the HP Elitedesk mini series is perfect for homelab enthousiasts that want 1 or more HP 1 liter pc's and rack mount them. The mount consists of two printed parts that both can be printed without supports by…

Downloads
3,745
Likes
282
Rating
5
P
Printablesfarhoodliquor

10" (Inch) Rackmount for Mini HP ProDesk, EliteDesk, G1, G2, G3, G4, G5, G6

This should support basically every HP ProDesk and EliteDesk mini PC I could find pictures of. It also has mount holes to work mounted forward or backward in the rack. The rack I'm using it with is…

Downloads
2,696
Likes
205
Rating
4.5
P
PrintablesGan

Nerf Elite dart magazine (5, 8 & 10 rounds)

Nerf full length elite dart magazine. With a printed spring. Feature a symmetrical design so you can insert it both ways. Compatible with most blasters (tested on Spectrum, Stryfe, Turbine and Echo). Printing the magazine Print body,…

Downloads
2,406
Likes
221
Rating
4.91
P
Printableskwfredeen

Xbox Elite Controller Stand

Xbox controller stand with cutouts for the paddles on the back. Best fits the elite series 2, but because of the slightly different shape from the series controller originally used by the OP, it's not a perfect fit. Original elite…

Downloads
2,354
Likes
252
Rating
4.96
P
Printablesboolmool

Xbox One Controller Phone Mount (Minimal Supports, elite and elite series 2)

Someone requested an xbox controller version of a phone mount I made for the Stadia controller (thing:4008153) so here it is. Confirmed that it does work with an elite series 1 and series 2 controller with paddles (special thanks to…

Downloads
2,255
Likes
242
Rating
4.67
P
PrintablesWaikikiprod

Nerf Elite Removable Stock

Custom Blaster Sniper Scope Blaster Removable Stock Blaster Reflex Scope 🇬🇧English🇬🇧 ((In 🇫🇷Français 🇫🇷 at the bottom of the page )…

Downloads
2,113
Likes
413
Rating
4.97
P
PrintablesWartyWarthog123

Playstation Pulse Elite Headset Fix

To properly secure the weak point, the model must be slightly below where the headband attaches to the frame. https://makerworld.com/en/models/2018195-playstation-pulse-elite-headset-fix#profileId-3040885 (for bambu users) Some people…

Downloads
2,045
Likes
46
Rating
5
P
Printablesdewdrop

10" 1U Rack Mount for HP EliteDesk/ProDesk Mini G2

Base is extended out a little more than the original, and removed most of the top cover to allow for some clearance for screw heads if using the VESA mount holes, and to allow for some airflow in through the top vents. Prints without…

Downloads
1,793
Likes
177
Rating
4.33
P
PrintablesBernd

Oculus Quest 2 Stand Elite Battery Strap

Dies ist ein Remix von "Mike vom Mars" https://www.thingiverse.com/thing:4025967 zu dem Brillenträger und Ständer gibt es noch eine zusätzlichen Träger zum aufsetzen, der das Elite Batterie-Pack trägt. Es wurden die Controllerbefestigung…

Downloads
1,634
Likes
180
Rating
4.79
P
PrintablesGary_BBGames

Elite Series 2 Xbox Controller Paddle

I'm fine with the shorter paddles, but always accidentally knock the long ones. I wanted something to use them to capture video, so made these stubby back paddles for infrequent use. Should work with the Series 1 or 2. Print Settings…

Downloads
1,501
Likes
147
Rating
4.88
P
PrintablesBrite Minis

Elite Saracen Spearman 28mm (supportless, FDM friendly)

Elite Saracen Spearman. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The mounted spearman…

Downloads
1,315
Likes
141
Rating
5
P
PrintablesJanos Zakarias

HP Elitedesk mini 10" rack mount with keystones

HP Elite/Prodesk mini (G3/4/5, possibly later) 10" 1U rack mount with 2 keystone slots. 250mm wide faceplate.

Downloads
1,309
Likes
123
Rating
5
P
PrintablesKahnindustries

Anaconda 2 Part (Elite Dangerous)

Anaconda model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing This work is strictly fanart and not meant for commercial distribution. All respected trade marks are property of Frontier…

Downloads
1,249
Likes
102
Rating
5
P
PrintablesKahnindustries

Federal Corvette 2 Part (Elite Dangerous)

Federal Corvette model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for…

Downloads
1,165
Likes
97
Rating
5
P
PrintablesPichon

HP EliteDesk 800 G3, G4, and G5 PC 10-in Rack Bracket

A 1U bracket to mount an HP EliteDesk 800 G3 , G4, or G5 in a 10-inch rack I designed and printed the Skeleten , a 10-inch rack to house my homelab. I wanted it to contain everything I needed, except maybe a NAS. From top to bottom: 2U -…

Downloads
1,144
Likes
105
Rating
5
P
PrintablesKahnindustries

Imperial Cutter 2 Part (Elite Dangerous)

Imperial Cutter model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for…

Downloads
1,120
Likes
103
Rating
5
P
PrintablesLADsPrint

Xbox Series X - Controller (Standard or Elite) and Headset Holder

English: The Xbox Series X Controller and Headset Holder allows you to securely and conveniently store your Xbox Series X controller and headset near your console. This holder has been specifically designed for 3D printing and is easy to…

Downloads
1,096
Likes
114
Rating
5
P
PrintablesfbeauKmi

Nerf Elite 2.0 Shockwave Extend

A NERF silencer modeled for my son's Elite 2.0. It can probably fit other models. It should be printed as it comes without support.

Downloads
1,093
Likes
121
Rating
5
P
PrintablesTyphon3D

Elite Knigh Helmet - Dark souls

Hi thanks for printing my files! To connect the mask pieces to the main helmet I inserted some M5 nuts and used a two short screws from inside. The holes in the unions are designed to fit 1.75x15mm pings (you can make them with any…

Downloads
1,068
Likes
303
Rating
0
P
Printablesdlford

19" (Inch) Rackmount for Mini HP ProDesk, EliteDesk, G1, G2, G3, G4, G5, G6

The middle part needs support on build plate only, the other parts shouldn't need any supports. Uses m4 machine screws and nuts to assemble after printing. buymeacoffee.com/dlford

Downloads
1,055
Likes
86
Rating
4.8
P
Printablesfreiform

Elite Suito Tennis Ball Feet

I designed this to put my Suito Elite Smart Trainer on tennis balls. This allows for significantly more side-to-side movement and also reduces noise/vibration induced into the floor. I use 4x for my suito. The feet are mounted using 7,5…

Downloads
1,037
Likes
36
Rating
5
P
PrintablesLayerLux3D

Nerf Gun Elite Sniper Scope

This is a remix of an awesome Scope by DrDanielJThomas, I have modefied it to fit a nerf gun and hollowed the Scope and added a crosshair. The print version of the model does not require any supports. If you want to seperate the parts…

Downloads
1,036
Likes
134
Rating
0
P
PrintablesAlex

HP EliteDesk 800 under desk mount

Simple mounting brackets for different Mini PCs from HP. Should be compatible with the HP EliteDesk 800 series (at least G1 - G5). Possible event compatible with the HP ProDesk 600 series. To maximize the biggest strength, the model…

Downloads
1,030
Likes
61
Rating
4.67
P
Printablestherealsauce

Xbox Elite Controller Series 2 (Series S/X Stand)

Print. Cut. Clean. Place. It's that simple.

Downloads
1,001
Likes
179
Rating
4.63
P
PrintablesJBE

SSD HDD mounting for HP EliteDesk ProDesk

SSD HDD caddy mounting for HP EliteDesk ProDesk. Just add M3x8 screws and you are all good to go.

Downloads
989
Likes
88
Rating
5
P
Printablesaottesen

HP EliteDesk Mini 800 G5 Under desk-mount (Confirmed that it suits the other G-models as well)

Needed to mount my HP Elitedesk 800 G5 Mini under my desk. Quickly sketched up this design with slotted holes for easy installation. Mount the computer upside down, so it can suck cold air from "top cover". Print Settings Printer Brand:…

Downloads
919
Likes
68
Rating
5
P
PrintablesKahnindustries

Krait MKII 2 Part (Elite Dangerous)

Krait MKII model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam, no supports This work is strictly fanart and not meant for commercial…

Downloads
859
Likes
62
Rating
5
P
Printablesscubadiver48

HP EliteDesk 800 G4 SFF - 3.5" HDD Caddy/Mount

This is a toolless caddy/mount for a 3.5 inch HDD in an HP EliteDesk 800 G4 SFF ( no hardware required ). This mount should fit almost all 3.5 inch HDD and should also work in other HP EliteDesk and ProDesk computers. It is meant to…

Downloads
834
Likes
69
Rating
5
P
PrintablesKahnindustries

Python 2 Part (Elite Dangerous)

Python model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial…

Downloads
828
Likes
73
Rating
5
P
PrintablesGalactic Armory

Elite Miniature

3D Print Files in STL and 3MF format of an Elite miniature! Available in 2 different scales - 1:48 and 1:12. The 3MF is in 1:12 scale. This free pose is 1 of 16 available through the Officer tier on my Patreon until April 30th, 2025:…

Downloads
817
Likes
133
Rating
0
P
Printablesgodzilla1954

FALLOUT NEW VEGAS ELITE RIOT GEAR

FALLOUT NEW VEGAS ELITE RIOT GEAR

Downloads
783
Likes
171
Rating
4
P
PrintablesBurf

HP ProDesk / EliteDesk G4 Ethernet Port Flex IO Adapter

Add a second ethernet port to your mini PC! This adapter plate allows an ethernet port to be mounted in the Flex IO slot usually used for an additional display connector. This was designed for a ProDesk/EliteDesk G4, but it may fit other…

Downloads
762
Likes
58
Rating
5
P
PrintablesKahnindustries

Farragut Battle Cruiser 3 Part (Elite Dangerous)

Federal Corvette model from Elite: Dangerous Model is split into three parts at the widest points Point the three parts vertically at the seam This work is strictly fanart and not meant for commercial distribution. All respected trade…

Downloads
754
Likes
79
Rating
5
P
PrintablesERiK004

NERF Elite 2.0 Commander Dart Holder/Držák šipek

Dart holder for upper tactical rail on Elite 2.0 Commander. Might fit other models also, I designed and tested it on the mentioned model only. Držák šipek pro horní taktickou lištu na Elite 2.0 Commander.Může pasovat i na jiné modely,…

Downloads
725
Likes
86
Rating
5
P
PrintablesNotEnoughGlue

Minimalist Xbox Elite 2 Controller Charging Stand

This is a minimalist charging stand for the Xbox Elite series 2 controller. This uses the charging dock that comes with the Xbox elite controller. There are 2 versions of the charging stand - Standard and deep cutout. The deep cutout…

Downloads
725
Likes
75
Rating
4.71
P
PrintablesVVeasel
Downloads
706
Likes
43
Rating
5
P
PrintablesByteDeluxe

HP Prodesk / Elitedesk 800 mini vertical stand

Light model to support a Prodesk or Elitedesk mini 800 G2 or equivalent.

Downloads
693
Likes
42
Rating
5
P
PrintablesKahnindustries

Diamondback Explorer 2 Part (Elite Dangerous)

Diamondback Explorer model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial…

Downloads
626
Likes
61
Rating
5
P
PrintablesRodraedro

Lightweight mouse case (razer deathadder elite)

The case reuses the screws from the deathadder. The shape is inspired by the new razer deathadder v3, for users with a palmgrip.

Downloads
623
Likes
37
Rating
0
P
PrintablesMethyl

Elite Dangerous Corvette

This model took a ridiculous amount of time to clean up to the point of being printable. Print instructions .1mm Layer Height. Infill doesn't matter much. Glue together when finished.

Downloads
604
Likes
53
Rating
5
P
PrintablesGermanDarknes

Minimalistic Xbox Elite Series 2 Controller Stand for Skadis (Supports Scuf Paddles)

This model has a slight wiggle, but less than the one by kwfredeen . The “ramp” was adjusted for that. It does not fit an original Xbox controller! I also adjusted the cutout from the original model, you can use this stand without…

Downloads
596
Likes
95
Rating
5
P
PrintablesJurek S

Xbox Elite Controller Series 2 Stand

I designend this because now it looks way better while charging. You can print it as a multi material part or print the logo seperetly and glue it in (could be a thight fit). There is a big hole in the stand so you can add some extra…

Downloads
592
Likes
64
Rating
4.85
P
Printablesvictoriadouglas

Xbox Elite V2 Charging Stand

A charging stand for the Xbox Elite V2 controller. Accommodates the included charging stand. Uses minimal material due to the cutouts. Doesn't need to be printed with supports, but it might make certain areas more stable if you do. Any…

Downloads
574
Likes
70
Rating
4.2
P
PrintablesKilesa

Visor For Lowrange Elite FS 9inch Fish Finder

Visor For Lowrange Elite FS 9inch Fish Finder. Daylight cover. For better viewing. Also in the rain. I Printed this with PETG Black. On the back, No support needed. Width 60mm, 3.2mmThick, 2x100gr, 3 bolts M3x15, 3 nuts M3 Width 80mm,…

Downloads
560
Likes
36
Rating
5
P
PrintablesKirk

Quest 3 Elite Strap Cable Clip

lengthened to fit the Quest 3 Elite Strap

Downloads
544
Likes
55
Rating
5
P
PrintablesKahnindustries

ASP Explorer 2 Part (Elite Dangerous)

ASP Explorer model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam, no supports This work is strictly fanart and not meant for commercial…

Downloads
536
Likes
62
Rating
4.67
P
PrintablesKahnindustries

Sidewinder 2 Part (Elite Dangerous)

Sidewinder model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial…

Downloads
520
Likes
41
Rating
5
P
PrintablesGermanDarknes
Downloads
519
Likes
51
Rating
4.8
P
PrintablesGeweldich

NERF Elite 2.0 Commander RD 6 rail magazine for six darts

A six dart rail mounted magazine for (e.g.) the NERF Commander with its six shot revolver design. I added two extra ammo slots to the model by Oliver Boesch using Bambu Slicer (#workaround). I first tried it using Tinkercad, but the…

Downloads
512
Likes
52
Rating
4.83
P
PrintablesRocKz

Fanatec CSL & CSL Elite Pedal Loadcell Brake mod

My mod is greatly inspired by some commercially available one but I've modeled it myself from the ground up and took the liberty of adjusting it to my liking. This mod will make the braking more linear and less stiff overall which is what…

Downloads
498
Likes
60
Rating
5
P
PrintablesShokunin

Xbox One Elite Controller Series 2 wall mount

2x 8G or M4 Countersunk screw or Mounting double sided tape are required. Once installed, you can slide the charging dock into the mount.

Downloads
494
Likes
41
Rating
5
P
PrintablesRicky Bobby

Lectric Elite to Head Tube Mount

I have a Lectric XP4 with the Elite headlight. Like so many others, my light snapped at the mount. I super glued it as a temporary fix before designing this. I hope you like it. Photo of light on the wall is 25' from light to wall. Top of…

Downloads
492
Likes
19
Rating
5
P
Printablesvrsn3ptoh

HP Elitedesk 800 G1 10 Inch Rack Mount

Print settings: 0.2mm layer height 4+ bottom layers and 5+ top layers 6 perimeters w/ 0.6mm nozzle or 9 perimeters w/ 0.4mm nozzle 10+% infill I used PETG. PLA may work fine, but I was concerned about creep. I have also not tested the…

Downloads
485
Likes
55
Rating
0
P
PrintablesmagicGnome96

HP PRODESK/ELITEDESK SSF G2 HDD Cage Remake

A redesign of the internals of the HP Elite/Pro Desk SSF G2 for more HDD space rather than using external drives. Requires removal of plastic holders for current caddy, which are easily removed with a small flat head screwdriver.…

Downloads
480
Likes
75
Rating
5
P
PrintablesKeen

HP ProDesk G5 & EliteDesk Mini PC Front Panel Bezel Replacement

I designed this replacement bezel, as I could only find one design and it didn't fit, even after scaling it up. So I designed this one from scratch. It has been designed in OnShape if you would like to make any changes. I've made two…

Downloads
474
Likes
52
Rating
5
P
PrintablesKahnindustries

Type-10 Defender 2 Part (Elite Dangerous)

Type-10 Defender model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for…

Downloads
467
Likes
51
Rating
5
P
PrintablesKurkchiyan

Nerf Elite Commander 2.0 Mods

These mods are designed to improve the accessibility of regular Nerf Elite Commander 2.0. Once I noticed that my son was having a hard time reloading the Nerf gun because the regular charging handle was a bit too tight and the grip was…

Downloads
458
Likes
36
Rating
5
P
PrintablesKahnindustries

Krait Phantom 2 Part (Elite Dangerous)

Krait Phantom model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam, no supports This work is strictly fanart and not meant for commercial…

Downloads
453
Likes
43
Rating
5
P
Printablesmscalora

Nerf Elite 2.0 Blaster Removable Stock

It printed OK without any support but required a little sanding at the very top. It is hollow with 2mm walls, a bit thicker at the connection. Fusion 360 file included so you can edit all you want. 57.5g filament

Downloads
453
Likes
62
Rating
5
P
PrintablesSIERRASTRIKE

Xbox Elite Controller Series 2 Bumper repair spacers

Bumper contacts get bent from hard use or being dropped. Print these, pop the top on controller and install. These are approx. 6mmx7mmx2.7mm thick. I printed in PLA+, 100%infill, with 8mm brim for good bed adhesion. 6 minute print

Downloads
449
Likes
55
Rating
5
P
PrintablesKahnindustries

Imperial Clipper 2 Part (Elite Dangerous)

Imperial Clipper model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam, no supports This work is strictly fanart and not meant for commercial…

Downloads
445
Likes
50
Rating
5
P
Printablesagent0530

Xbox Elite Series 2 Controller Stand

This is my take on a charging stand for the elite series 2 controller. It holds the charging dock along with the 4 attachable thumb sticks, the other dpad, and the tension adjuster tool. The top left thumb stick slot is deeper to…

Downloads
444
Likes
70
Rating
4.67
P
PrintablesMilanN

CSGO - CS2 Global Elite Ranks Keychains

CSGO / CS2 LE-GE Rank Keychains Ranks included: Legendary Eagle, Legendary Eagle Master, Supreme Master First Class, The Global Elite. Material Used: Bambu Filaments Background: Black PLA Stripes/Rank: Silk Gold PLA Supreme/Global Elite…

Downloads
443
Likes
66
Rating
5
P
Printablescolincurtin

Airsoft Elite Force 1911 knurled grips

Side grips for Elite Force 1911

Downloads
440
Likes
37
Rating
0
P
PrintablesChad

TLR 22 5.0 Elite Tower Guards

Tower Guards for the TLR 22 5.0 Elite. I will add a rear guard soon and update the designs with version numbers if needed after some testing. This is designed to be attached with zip ties and I wanted good quality ties so I got “TY24MX…

Downloads
439
Likes
15
Rating
0
P
PrintablesKahnindustries

Mamba 2 Part (Elite Dangerous)

Mamba model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial distribution. All…

Downloads
431
Likes
42
Rating
5
P
Printablesdmika7200

HP EliteDesk Front panel

This is an upper part of HP EliteDesk 800 G3 front panel. The pcs I've bought arrived with part of the front panel missing, so I've designed and printed a replacement. It's a snap-fit, so should stay in place, if not, some glue may be…

Downloads
427
Likes
35
Rating
5
P
PrintablesKahnindustries

Alliance Chieftain 2 Part (Elite Dangerous)

Alliance Chieftain model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for…

Downloads
425
Likes
31
Rating
0
P
Printablesoplak

HP Elitebook simple stand

A simple set of feet to keep your laptop upright. Save desks space, and accumulates less dust. I have made the feet wide enough so that they don't fall over when taking the laptop in and out of them. Designed for a HP Elitebook, but…

Downloads
424
Likes
36
Rating
4.8
P
Printablesideat0m

HP EliteDesk Mini G3, G4 and G5 Vertical Stand -2 variant

Simple vertical stand for HP Elitedesk/Prodesk G3-G5 mini. Printed with 0,2 layer, 4-6 perimeters, infill gyroid 10-25% (printed 0,2, 6, 25) 2 variants. For HP Elitedesk 800 mini or HP Prodesk 600 mini. Line G3, G4 and G5. 3mf files for…

Downloads
420
Likes
27
Rating
5
P
PrintablesKahnindustries

Fer De Lance 2 Part (Elite Dangerous)

model from Elite: Dangerous Fer De Lance Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial…

Downloads
418
Likes
52
Rating
5
P
PrintablesFx137

Notebook Stand for HP EliteBook 845 G7

Notebook stand for HP EliteBook 845 G7 that allows for a better height when used in combination with a separate keyboard

Downloads
416
Likes
37
Rating
5
P
PrintablesOmegaStar16

Elitedesk 800 G6 Flex Port 2 Ethernet Bracket

This is a bracket for the hp elitedesk 800 g6 (DM/1L PC model) flex port 2. Usually a discrete GPU or serial add-on use this cutout in the chassis but I wanted a bracket for an ethernet to m.2 (A+E Key) card since my WiFi slot wasn't…

Downloads
416
Likes
28
Rating
5
P
PrintablesGHost_74

Corsair Scimitar RGB Elite gaming mouse - lightweight mod V4

Does NOT work with the Scimitar RGB as it has different layout for the main buttons and screws. Unfortunately, without buying one I cannot make a model specifically for that one. It works with Scimitar RGB Elite, and should work with…

Downloads
413
Likes
54
Rating
5
P
PrintablesKahnindustries

Imperial Courier 2 Part (Elite Dangerous)

Imperial Courier model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam, no supports This work is strictly fanart and not meant for commercial…

Downloads
411
Likes
46
Rating
5
P
PrintablesKahnindustries

Vulture 2 Part (Elite Dangerous)

Vulture model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial…

Downloads
407
Likes
30
Rating
5
P
PrintablesJAGS3

Xbox Elite Controller Gen 2 Stand

I have a small desk and the case that the gen 2 elite controller comes in is very bulky on my desk. So I wanted to have something smaller and something that would look better. I saw jupitas design and put my own twist on it. I did not…

Downloads
405
Likes
59
Rating
4.4
P
PrintablesHobbyist Notes

HP EliteDesk 600 G6-G9 Mini PC 10inch Rack mount

Original model was too tight and mounting holes are to narrow/far for some racks. Print 2 one for front and one for the Back. I used ABS to print it you can also use PETG. More infil - stronger part! I used 4 walls, 5 shell layers, 10%…

Downloads
400
Likes
43
Rating
5
P
PrintablesKahnindustries

Cobra MKIII 2 Part (Elite Dangerous)

Cobra MKIII model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial…

Downloads
400
Likes
54
Rating
5
P
Printablesschmid01

HP EliteDesk G4 Bracket for Ethernet Port

This is a Remix of HP ProDesk / EliteDesk G4 Ethernet Port Flex IO Adapter von Burf | Kostenloses STL-Modell herunterladen | Printables.com from Burf. Please see his Model for Details. I could mount my Bracket without modification of the…

Downloads
390
Likes
21
Rating
0
P
PrintablesPizza42

Mandalay Elite Dangerous

1000:1 scale Haven't printed it yet, would slice it in half and glue it. See my Python Mk2 for the extraction process of theses Elite ship models

Downloads
387
Likes
24
Rating
4.67
P
Printableswasyl00

Oculus Meta Quest 2 elite strap replacements

Print replacement straps for your Oculus elite (with or without battery) strap. There are three versions included: One piece original size (needs bigger print bed) One piece Prusa MK3 bed size (should fit most heads but may be tight if…

Downloads
387
Likes
80
Rating
5
P
PrintablesKahnindustries

Type-9 Heavy 2 Part (Elite Dangerous)

Type-9 Heavy model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial distribution. All…

Downloads
380
Likes
53
Rating
5

Half Life 2 Combine Elite Helmet

Here's a little love for an underappreciated but iconic character, the Half Life 2 Combine Elites! This ready-to-print helmet comes in multiple parts: -The main helmet -An eyepiece for resin printing -An eyepiece for vacuuforming -Ear…

Downloads
377
Likes
56
Rating
5
P
PrintablesPizza42

Cobra Mk V Elite Dangerous

scale 1000:1 like my other Elite ship models. Check Python Mk II for details on the model extraction process.

Downloads
373
Likes
21
Rating
5