Search results: fila

Sort order

21,755 models

P
PrintablesExtrutim

Filament Clip | Grandma's Favorite Filament Clip

A simple filament clip which prevents the filament from unwinding reliably! I've tested many filament clips in the past, but couldn't find one that I was 100% satisfied with. Out of this need I have designed this small clip! Since I read…

Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant

Downloads
156,735
Likes
33,578
Rating
4.86
P
PrintablesKimframes

Filament Clip with Screw

1.75mm filament clip with screw. One size fits most spools. 31 October 2022 update New body with tearshaped screwhole to fix issue with screw being too tight. Added screw model from second edition of filament clip. Second Edition…

Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant

Downloads
27,407
Likes
4,995
Rating
4.71
P
Printables3DPrintM.D.

Simple Universal Filament Clip V2+ {NEW 2024 VERSION}

Filament clip works on many spool brands including Prusament, Amazon Basics, Overature, Hatchbox, AMZ3D and others. Very simple design. Version 2+ , added March 15, 2024 incorporates slightly smaller filament clasps and reverses the two…

Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
26,379
Likes
4,545
Rating
4.81
P
PrintablesMrMinion

Filament Clip V8

Simple filament clip, works with any 1.75 mm spool. Print instructions Yes. Indeedio. Yet another filament clip lmao... I looked and tested many, almost got so bored of it that wanted to give up. But I simply needed one working desing to…

Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant

Downloads
16,477
Likes
2,489
Rating
4.76
P
PrintablesMolodos

Elegoo Neptune 3 and 4 replacement filament spool holder

A replacement filament spool holder for serveral Elegoo Neptune FDM 3D-printers. If you want a second spool holder, your spool holder broke or your spool is to small to fit on the original one. Supported Printers Elegoo Neptune 3 Pro…

Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant

Downloads
7,750
Likes
814
Rating
4.99
P
Printablesvivamus3d

Hygrometer for Filament Dryers (Sunlu S1 and eSun eBox)

The Sunlu S1 and eSun eBox unfortunately don't come with a built-in humidity gauge. But there are cheap mini digital hygrometer/thermometers available in many shops which allows you to easily add one yourself. My design consists of a base…

Print approx. €0.99–€1.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
6,407
Likes
360
Rating
4.89
P
Printablesishikawats

Filament Quick Clamp V2

This is new version of my previous Filament Quick Clamp models. Features: Prevents filament spool from unraveling. Filament is easy to snap in place by a clever gripper mechanism. Clamp and gripper is spring loaded by a single internal…

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant

Downloads
4,877
Likes
1,928
Rating
4.81
P
PrintablesDET-Man

PTFE Tube Cap with Filament Label

This is one component of Yet Another Drybox . If you are planning to build your own box, have a look! You might find other components useful for your build, or maybe you even end up building the complete box 🙂. When building my filament…

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4,050
Likes
141
Rating
5
P
PrintablesDAS FILAMENT

MasterSpool - DAS FILAMENT Edition V3.2

Attention: we are switching to 1 kg refills, so this 800 g version is unfortunately no longer compatible. The new 1 kg Masterspool can be found here: https://www.printables.com/model/1464203-masterspool-1-kg-das-filament-refill…

Print approx. €5.70–€6.96 excl. taxPreliminary estimate for one variant

Downloads
3,709
Likes
325
Rating
4.75
P
PrintablesTocache

Another roof filament spool holder

This is my own design for a filament spool holder to be put on a roof or wall. UPDATE 07-26-2019: Added version 2, beefier build UPDATE 04-15-2021: Added version 3, more beefier build and extended the base to reach the mount screws more…

Print approx. €4.62–€5.65 excl. taxPreliminary estimate for one variant

Downloads
3,580
Likes
344
Rating
4.82
P
PrintablesFrasse16

Filament Spool holder

The PERFECT filament spool holder This spoolholder is very efficient and easy to use and print. One side uses only two different 3D-files printed twice, two 608 bearings and two M3 bolts and nuts. The spoolholder is very sturdy, it keeps…

Print approx. €5.19–€6.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,437
Likes
495
Rating
4.92
P
Printables3D-Print Brehm

IKEA 365+ Box 10,6 Liter - Filament Dry Box mit 2x Silica Zylinder (für PRUSAMENT 2 Rollen) mit digital Hygrometer

Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…

Print approx. €2.59–€3.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,360
Likes
399
Rating
4.33
P
PrintablesEric T

Inland Reusable Filament Spool v2

Model has been updated for newest rolls that are 80mm in diameter and have a notch cutout. I recommend printing a layer height no more than 50% of your nozzle size(ex. no more than .20mm layer height for .40mm nozzle). Printing any higher…

Print approx. €3.28–€4.00 excl. taxPreliminary estimate for one variant

Downloads
1,995
Likes
154
Rating
4.73
P
PrintablesHackMan3D

HAFC V2 - Hackman Automatic Filament Cutter V2

HAFC V2 – Hackman Automatic Filament Cutter by Hackman3D Here's a link to get the necessary hardware. No partnership or affiliation involved, but since the price is reasonable, I haven't asked for a commission. HAFC Aliexpress Pack back…

Print approx. €2.95–€3.61 excl. taxPreliminary estimate for one variant

Downloads
1,741
Likes
989
Rating
4.9
P
PrintablesCelta

IKEA Kallax Filament Storage Rack

Organize your 3D printing filaments with this simple and effective filament storage solution for IKEA Kallax shelves. This easy-to-print design consists of two parts: one for the front side and another for the back of the shelf. Print the…

Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant

Downloads
1,700
Likes
628
Rating
4.93
P
PrintablesGuillaume3D3

PET Bottles to PET Filament - Give Me Bottles ! / GMB Project

Extrusion machine which allows plastic bottles (PET) to be recycled into printable filament for a 3D printer. I have made a guide in .pdf format, which summarizes all aspects of the machine with information.…

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,449
Likes
1,109
Rating
5
P
PrintablesmisterT

MasterSpool - DAS FILAMENT Edition V3 - Optimized Print

Important Update 2025/2026 Das Filament changed from 800 g to 1 kg. The old Masterspool is no longer compatibel with the 1kg spools. The NEW Das Filament1 kg Masterspool:…

Print approx. €3.76–€4.60 excl. taxPreliminary estimate for one variant

Downloads
1,444
Likes
135
Rating
4.88
P
PrintablesEric T

Sunlu S1 Filament Dryer Lid Support

Was able to pick up the Sunlu S1 at a discount, but was annoyed the lid would go flying back every time I opened it and was concerned it was going to shatter. The updated design can be printed without supports. I recommend printing with a…

Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant

Downloads
1,335
Likes
192
Rating
4.91
P
Printablesmstoica

SUNLU dryer filament guide

When using SUNLU drybox on top of IKEA Lack enclosure, to make the filament traction smooth I created a filament guide adapter to be used with the lower hole on the case. This was inspired from https://www.thingiverse.com/thing:4833453…

Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant

Downloads
1,023
Likes
163
Rating
4.81
P
Printables_Alexis_

Triangle Filament Clip

Triangle Filament Clip (Based from K2 Clip) The clip can be left to "float" on your filament spool while printing. Three identical anchor points to facilitate the installation of the clip. The solid form is easier to print if you have…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
1,005
Likes
130
Rating
4.96
P
Printables3DPrintscher

SUNLU Refill Spool (V2) Adapter for Recyclingfabrik Refill Filament

Hallo zusammen, da ich viele leere, blaue SUNLU Refill-Spulen (V2) habe und keine Lust hatte, für die verschiedenen Farben der Refills von der Recyclingfabrik extra Spulen zu drucken, habe ich mit Fusion 360 einen Adapter entwickelt, um…

Print approx. €2.47–€3.01 excl. taxPreliminary estimate for one variant

Downloads
917
Likes
152
Rating
5
P
PrintablesOestle

IKEA 365+ 10.6l Filament Storage & Dry Box

Modular filament storage & dry box using the IKEA 10.6l containers that can fit 2 spools of 1kg filament. All the parts for one box fit on the buildplate of the MK4 and can be printed at once. Currently for storage only, but that's all i…

Print approx. €6.97–€8.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
898
Likes
202
Rating
4.89
P
PrintablesDombi3D

MMU2S filament buffer upgrade for Samla 22l Drybox.

With this upgrade you can keep your filaments dry and organized in a very small footprint. You do not need anymore the filament buffer. These designs should be compatible with all 200 mm Spools which has a round (Das Filament type) or…

Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant

Downloads
896
Likes
351
Rating
0
P
PrintablesParasitKegel

Polydryer Filament Holding Drybox Plug

Plug for securely holding the end of the filament spool when sealing the Polymaker Polydryer box opening. The plug does not protrude above the top edge when installed in the lid. Compatible with 1.75mm filament. The hole in the plug end…

Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
892
Likes
215
Rating
4.93
P
PrintablesDarkmoon

Sunlu S2 Filament Dryer PTFE Tube

Sunlu S2 Filamenttrockner PTFE-Schlauch PTFE Tube für Filament, was sich in alle Richtungen bewegen kann, kann erstellt. der Adapter nimmt einen PTFE Schlauch 4x2 mm auf. Dieser wird ca. 5cm ins innere geschoben und ca. 10 cm bleiben…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
875
Likes
138
Rating
4.96
P
PrintablesK-Med

Parabolic Filament Spool Roller

A parabolic filament spool holder/roller. Just set it and forget it. The parabolic design of the roller keeps the filament reel centered. Requires 4 skateboard bearings (i.e., 608zz Double Shielded, 8x22x7), and snaps together. I grew…

Print approx. €9.38–€11.47 excl. taxPreliminary estimate for one variant

Downloads
847
Likes
116
Rating
4.94
P
PrintablesDarkburrow

Stock filamentholder for Ender 3 S1

I tried finding the stock one that would fit the opposite side of the spoolmount but in avail, so i decided to just model it quickly and share it

Print approx. €2.27–€2.77 excl. taxPreliminary estimate for one variant

Downloads
784
Likes
117
Rating
4.79
P
Printablesfly

Spool Box - "Das Filament" spool

Spool Box - "Das Filament" spool - Use M2x6 Screws with holes direct beside the outer ring.

Print approx. €2.93–€3.59 excl. taxPreliminary estimate for one variant

Downloads
778
Likes
198
Rating
5
P
PrintablesvmLOGIC

Filament samples (f3d file)

I love Seemonster's filament pattern. They are reduced to the essentials and are not at the same time printer tests, which some others make of it. Thanks for that! :-) But I wanted to design the printed texts myself. No stickers, no…

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
735
Likes
121
Rating
4.96
P
PrintablesA2S_dESIGN

3DBenchy filament clip

A clip to hold the filament on your spools and prevent it from getting tangled. When we put this clip from the famous 3DBenchy on the spools we can appreciate the color and finish of the filament after printing.

Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
612
Likes
329
Rating
2.83
P
Printables3D KIMBA

Spool Wind Spinner: Another Way to Recycle a Filament Spool

Spool Wind Spinner: Another Way to Recycle a Filament Spool Product Description: Transform your empty filament spools into a vibrant Spool Wind Spinner with this innovative design! By printing the blades and end caps that hold bearings,…

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant

Downloads
589
Likes
294
Rating
5
P
Printableskentnek

Humidity Sensor Holder for Sunlu S1 Filament Dryer

I like the idea of varstef75's sensor holder, however the curved hanger is unnecessary thick and the sensor frame is a bit too small. So, I redesigned it from scratch, using half of this holder instead, which should fit the sensor easier…

Print approx. €1.81–€2.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
585
Likes
119
Rating
4.93
P
PrintablesElektroarzt

Vacuum helper disc for filament dry bags

Simple but effective disc for usage with filament dry bags. I always had difficulties in using the pump right in the first attempt. Just put one disc with the filament in the bag and exhaust the dry bag manually or with a battery pump…

Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
546
Likes
82
Rating
4.85
P
PrintablesMarcinPaska

Filament Holder Compatible with Skandis Boards

This is the first prototype of a 3D-printed filament holder designed for mounting on Skandis perforated boards. The model consists of interlocking parts, including a main bracket, a spool mount, and a locking clip. The design allows for…

Print approx. €8.33–€10.19 excl. taxPreliminary estimate for one variant

Downloads
506
Likes
262
Rating
3.5
P
PrintablesShoaib Khan

Print approx. €4.11–€5.02 excl. taxPreliminary estimate for one variant

Downloads
456
Likes
121
Rating
5
P
PrintablesPastelka

Stop dush paper spool filament

Preventing the formation of paper dust from the spool rubbing against the holder. In order to print the thread correctly, you need to use a layer height of 0.10 mm. The attached 3mf and gcode files use a dynamic layer height. The new…

Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant

Downloads
391
Likes
107
Rating
4.75
P
PrintablesTwirlygrlandMom

Flip Flop Sandal Summer Earring Set - Gcode included for easy filament change two-tone design, dangle earrings for summer

Fun dangling flip flop earrings with a multi-color print utilizing filament changes. Excited to see what color combinations you choose! Size up or down but watch the size of the post hole. We included the gcode for a set. But feel free to…

Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant

Downloads
386
Likes
90
Rating
5
P
PrintablesStefano Vartolo

Sunlu Filament Dryer humidity sensor holder

I bought a SUNLU Filament dryer to help solve my filament moisture issues ( https://amzn.to/2JTUdNk ). I designed a mount to use the small rectangular temperature/humidity sensors ( https://amzn.to/372N2eJ ). It uses the upper filament…

Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
375
Likes
78
Rating
4.63
P
PrintablesHeikit

Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant

Downloads
366
Likes
49
Rating
4.75
P
Printableslord_edel

Filament efficient pen tray (19g)

No supports needed. When printing on the Prusa Mini, rotate the model 45°.

Print approx. €2.18–€2.67 excl. taxPreliminary estimate for one variant

Downloads
331
Likes
62
Rating
5
P
Printablespaul020559

Filament Clip (Universal, Remixed) for Thicker Walled Spools

Same as original remix but for spools with thicker walls (thanks to WhatWouldAnEngineerDo for pointing out that cardboard spools are a bit thicker). The first remix is at:…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
321
Likes
56
Rating
5
P
PrintablesTickTock

MMU2S Extruder Filament Sensor Micro Adjuster

Update: This part was recently changed. If your extruder was manufactured after February 2021, you should use the 2021 version. Earlier printers will have to use the other. I found it very difficult to set the very sensitive extruder…

Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
311
Likes
44
Rating
4.83
P
Printablesvolly

Rubber Band Filament Cutter 45°

I love the Filament Cutter 45 from Pomi, but as i try to print it, i found that the needed materials are not as common available as i thought. So i decided to give it a “facelift” with a even easier accessible material: rubber band. Print…

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
278
Likes
63
Rating
5
P
Printablesishikawats

Grippy Filament Clip Clamp

This is a variation on previous model Filament Quick Clamp : https://www.printables.com/model/506814-filament-quick-clamp A rubber band powered filament clamp-on to prevent the spool from unraveling This new model is different in the…

Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant

Downloads
268
Likes
53
Rating
5
P
PrintablesArasti

Best filament clip/Držák filamentu

If you are finding filament clips for every different spool, you got it :-) Easy to print. You clip it simply to your filament spool and it fits perfect too on a spools with round corner. Default filament diametr is 1,75 mm. Printing…

Print approx. €1.14–€1.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
252
Likes
18
Rating
5
P
PrintablesFredslund

The FilaShelf

This model is recommend to be printed in PETG or other strong materials, with 4 perimeters. The shelf fits perfectly to organize filament, books or whatever you can fit. to make a basis shelf 4 feet, 4 extension top, 4 extension bottom, 2…

Print approx. €6.40–€7.82 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
233
Likes
104
Rating
5
P
PrintablesSimple3D

SUNLU Filament Dryer Humidity Sensor Holder

I bought a SUNLU Filament dryer to help solve my filament moisture issues ( https://amzn.to/2JTUdNk ). I designed a mount to use the small rectangular temperature/humidity sensors ( https://amzn.to/372N2eJ ). It uses the upper filament…

Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
230
Likes
54
Rating
5
P
PrintablesJürgen Rotner

Filament opening for Sunlu S2 dryer

I printed this model split in halves with PETG and half speed to avoid stringing. The connecting pieces are still to tight, so consider to take the STEP-file and reslice it.

Print approx. €1.45–€1.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
215
Likes
37
Rating
5
P
PrintablesHefesto

Filament and leftovers waste bin

Get rid of filament waste and all kinds of small rubbish around your workshop, quickly and easily. The model is optimized for 3D printing and has been thoroughly tested (this is the second iteration of my design, I may upgrade it even…

Print approx. €5.15–€6.29 excl. taxPreliminary estimate for one variant

Downloads
197
Likes
22
Rating
4.75
P
Printablescaesar_1111

Spray Can Straw Holder / Mount - Universal - Magnetic e.g. for WD-40 cans !!<100mm filament!!

As I already have remixed a straw holder which only fits the 150ml and 250ml bottles of WD-40 i was wondering if there is something universal…. …now stumbling across the "Flash Contests Theme: Last Meter" I went for the universal and…

Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
188
Likes
71
Rating
4
P
PrintablesThiago Borges

Small Spool for Filament Leftover

This is a small filament spool to organize filament leftovers or samples and release the space took by the large but almost empty spools in your shelves. It is small enough that you can fit two of them in a 15x20cm box like the one in the…

Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant

Downloads
177
Likes
20
Rating
0
P
PrintablesVeda88

Sunlu Filament Dryer humidity sensor holder

Changes from the original: - Shorter, the display is now in the curve of the lid - Display fits deeper into the print The screw from the original should still work. Mine fits right over the small tube that came with the box which is a…

Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant

Downloads
173
Likes
39
Rating
4.89
P
PrintablesHelle

Halter für Filament Rollen 1 kg - alle Marken

Ständer und Halter für Filament bis 1 kg alle Hersteller

Print approx. €5.49–€6.71 excl. taxPreliminary estimate for one variant

Downloads
156
Likes
12
Rating
0
P
PrintablesScotty7642

Folding Razor Blade Cutter with 45 or 68 Degree Notch for Filament

Simple remix of the folding razor blade cutter except there are some notches in place for 45 or 68 deg. cutting of filament. This supports both 1.75mm and 2.85mm filament in 45 degrees. There is only a 1.75mm hole for the 68 degree angle…

Print approx. €1.77–€2.17 excl. taxPreliminary estimate for one variant

Downloads
155
Likes
27
Rating
4.33
P
PrintablesDasMia

Color Gradient Hexagonal Filament

Here you get all the files you need, to create your very own Multicolor gradient filament. It will have short transitions and will be about 9.5 meters long. If you have a filament sensor on your device you should be able to combine the…

Print approx. €3.02–€3.70 excl. taxPreliminary estimate for one variant

Downloads
155
Likes
46
Rating
5
P
PrintablesTwirlygrlandMom

When in doubt, eat bread. - Easy 10 minute, filament swap - Bread Basket Jewelry Set - Croissant earrings and Baguette necklace

When in doubt, eat bread. I designed this jewelry set as a surprise for Twirlygrl. (Shhhhhhhhh!) Size up or down but watch the size of the post hole. You can also make a necklace or pendant for other forms of jewelry. For the findings to…

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant

Downloads
154
Likes
63
Rating
5
P
PrintablesYosuke

Carton box (filament box) stacking piece

This is small pieces that enables to stack carton boxes stable. Like Prusament, some carton boxes are nicely designed and I thought too good to just throw it into recycling container. I made 2 versions (High and Low). High version makes…

Print approx. €4.77–€5.83 excl. taxPreliminary estimate for one variant

Downloads
151
Likes
71
Rating
4.33
P
Printablesfonzy

Z belt tensioner w. filament sensor bracket Ender 3 V3 KE

Movable z axis belt tensioner added bracket for filament sensor for Ender 3 V3 KE original screws can be used - cannot be used together with the original spool holder!!! Required parts: 1x M3 x 12mm 1x M5 Washer 2x F695 Bearings 2 parts -…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant

Downloads
151
Likes
49
Rating
3
P
PrintablesPavel

Filament spool earring / náušnice filamenty

Remixed model - added a coiled piece of filament that forms a loop for hanging the earring. *** Remixovaný model - doplněn vymotaný kus filamentu který tvoří očko pro zavěšení náušnice.

Print approx. €0.25–€0.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
146
Likes
85
Rating
3
P
PrintablesNovemberKou

Silicagel box with pipe holder for IKEA SAMLA 22 liter to make the filament dry box

What this is You can make a simple filament dry box by this model. This is a remix of Grizmo’s silicagel box. https://www.thingiverse.com/thing:3444820 I added the pipe holder and removed slits and a lid. Optional humidity sensor holder…

Print approx. €0.92–€1.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
139
Likes
51
Rating
5
P
PrintablesMilos

Paw patrol badges - simplified filament switching

Modified model from @PrinterIsComing to have the same color finishing on the same level - it makes it easier to print it in color with manual filament switching. The original badge it pretty thick, it can be scaled down to 75% at Z axis.…

Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant

Downloads
139
Likes
7
Rating
5

Stojan na filament 2,5 KG

Stojan na větší filament 2,5 KG. Obsahuje dva středy, silnější a slabší.

Print approx. €1.94–€2.38 excl. taxPreliminary estimate for one variant

Downloads
134
Likes
9
Rating
5
P
PrintablesAnotherBrain

Filament Sensor Mount for Prusa Mini Enclosure

This should solve the issue, that the filament sensor get stuck in the master spool. Also the Filament changing doesn't get more complicated. You need: PTFETubeMountingBreaket Original PTFE tube of the Prusa Mini 2x M3 nuts 2x M3x8mm…

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
134
Likes
33
Rating
4.89
P
Printables3D-Print Brehm

Schrauben-Box für PRUSAMENT Filament-Karton - stapelbar

Meine Sortierboxen für den PRUSAMENT Filament Karton kennen ja schon einige. Hier nun die Möglichkeit 32 Fächer für Schrauben und Muttern sortiert zu lagern. Bitte beachten: Es gibt eine Box für unten und eine Box für oben . je 2 Stück…

Print approx. €8.78–€10.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
122
Likes
6
Rating
0
P
PrintablesZbyněk Král

Filament Dryer Adapter for Gorenje FDK500GCW

The Filament Dryer Adapter, a complete redesign of the original by @Haprog , was created in OnShape and subsequently modified for the Gorenje FDK500GCW dryer. This adapter is compatible with all Gorenje dryers featuring a 310 mm tray…

Print approx. €0.76–€0.92 excl. taxPreliminary estimate for one variant

Downloads
114
Likes
19
Rating
5

Marilyn Monroe - 5 Color w/filament changes (1 at a time) relief topography

Right now I'm calling this style “ Relief Topography ” This is built for single-color printers so start with black and work your way to white. Filament change stops are included. Link to Fine Art Collection:…

Print approx. €4.00–€4.89 excl. taxPreliminary estimate for one variant

Downloads
113
Likes
36
Rating
0
P
PrintablesLavaman916

Apple Airtag Filament Keychain

I wanted to have an Apple Airtag on my keys so as to track them if I lost or misplaced them, but I wanted to hide the fact that I have the Airtag on my keys. So I made an Airtag holder that screws together, has an Airtag inside and still…

Print approx. €0.77–€0.95 excl. taxPreliminary estimate for one variant

Downloads
111
Likes
19
Rating
0
P
PrintablesEagleEi

Buffer box MMU3 for MK4 better Filamentsupport

This version helps all those who are looking for a special solution to optimize filament routing. This version allows the filament routing to the MMU to be perpendicular without a radius and reduces the bends. This version is also 100%…

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
111
Likes
31
Rating
3.5
P
Printablestsil_bill

Prusa XL official enclosure upgrade - Over the top feeding filament

Intro: With this mod you can feed filament over the top of the Prusa XL original enclosure without the need of drilling holes to the metal sheet. You have to drill the top acrylic plate which is replacable…

Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
109
Likes
52
Rating
5
P
PrintablesKamil Kaleta

Filament trimmer on the frame

I think this is self-explanatory design. All you need is a M4x15 screw with a nut, and Stanley blade. Assembly process: Print instructions Supportless, 10% infill

Print approx. €2.00–€2.44 excl. taxPreliminary estimate for one variant

Downloads
109
Likes
37
Rating
5
P
Printables3D-Print Brehm

Sortiment-Boxen (2 unten/2 oben) für den Prusa Filament-Karton (100% recycling)

Update 20211218: Unterer Einsatz mit 8 Einteilungen erstellt und hochgeladen Mal wieder aus der Not eine Tugend gemacht. Damit die Kleinteile rund um den PRUSA 3D-Drucker verräumt sind, habe ich diese Sortiment-Boxen entwickelt. Erst…

Print approx. €6.77–€8.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
108
Likes
30
Rating
0
P
PrintablesImagine_3d

Fully Customizable Filament Swatch Sample

A fully customizable (4 text sections and 5 thickness patches) filament sample swatch using Fusion 360. I couldn't find any that I liked anywhere online, so I made this one. It can be fully customized in Fusion 360. There are four…

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant

Downloads
107
Likes
30
Rating
5
P
PrintablesPrusa

Filament Trash Basket

A little box to keep next to your printer for any trash you will encounter.

Print approx. €6.57–€8.03 excl. taxPreliminary estimate for one variant

Downloads
93
Likes
10
Rating
0
P
PrintablesPFITS

Drybox for 2kg filament and Prusa MK3S+ Topmount

The Drybox is a remix and recreation of above models. It is build to fit directly on top of the Prusa MK3S+ Printer and has a shaft to hold the spool, so no need for any bearings and other tubes. To attach everything you will need this:…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
91
Likes
15
Rating
0
P
PrintablesSukaByat21

Microcenter's Inland Printable Spool for spool-less filament

I frequently get my filament from a Microcenter, and they sell spool-less filament for a little cheaper. I wanted to print a spool for the roll of cardboard cylinders to fit on, but the ones I found were too big. After taking inspiration…

Print approx. €5.92–€7.23 excl. taxPreliminary estimate for one variant

Downloads
89
Likes
6
Rating
0
P
PrintablesMroadrunnerM

SUNLU FilaDryer S1 Bracket Ankermake MC5

Bracket designed for my SUNLU FilaDryer S1 Plus Drybox. So that I can place it on my Ankermake MC5. Please note that placing this bracket is tight, but it all fits very well. You can move them once you have placed them. Top Bracket is…

Print approx. €1.83–€2.23 excl. taxPreliminary estimate for one variant

Downloads
83
Likes
10
Rating
0
P
PrintablesIan Foulds

Filament-Inlayed Vase-Mode Flowerpot

You print this little flower pot in vase mode and then press fit the inlay into the channels. (They snap in when I print on my Mk4). It allows you to make a dual color design with only a single extruder. Once I had all the filament press…

Print approx. €1.49–€1.82 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
75
Likes
35
Rating
0
P
Printablestom

Filamentspulenhalter für Prusa MK-Drucker/ Filament spool holder for Prusa MK printers

For English see below. Diese Halterung für die Filamentspulen wird auf den Rahmen des MK-Druckers montiert, so dass die Spule in der Querrichtung des Druckers liegt. Bei meinem Drucker hat die obere Strebe die Maße 40,4mm x 6,2mm. Die…

Print approx. €3.32–€4.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
74
Likes
10
Rating
0
P
PrintablesMrViddy

Filament Samples color Swatch

Bring your Business or side hustle to life with Filament samples! These Filament samples are simple but also see the layers, colors, and type of filament whatever you’re showing. 6mm keyring Hole 80mm x 21mm STEP. File included I mainly…

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant

Downloads
71
Likes
11
Rating
5
P
PrintablesPnoreck

Sunlu FilaDryer S2 Spacer

I found a couple of spacers for the Sunlu FilaDryer S2, but they were all too loose and/or too big. Since the spacer opens the whole top of the box, it doesn't need to open it up too much. I tried a couple of spacers, and most of them…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant

Downloads
70
Likes
7
Rating
5

Banksy's Heavy Weaponry - 2 Color w/filament change (1 at a time)

Start with White, then go Black. 2 colors/ 1 change total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…

Print approx. €3.34–€4.08 excl. taxPreliminary estimate for one variant

Downloads
66
Likes
41
Rating
0
P
Printables3d_print_it

Rolle für Princore Filament Trockenbox Prusament kompatibel

Auf Princore gibt es einen klasse Filamentabroller für die Ikea360 10l Boxen als .stl für einen schmalen Taler. Leider sind die Rollen nicht mit den Prusament Spulen kompatibel da die Rollen zum einen zu schmal sind und duch die…

Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant

Downloads
64
Likes
7
Rating
5
P
Printableswilly

Creality CR5 Filament Guide

This fits under the filament run-out detector on the CR5. The PTFE tube runs from the dry box and connects to a PC4-M10 connector attached to the feed end. Screw the connector onto the feed end and then use 12mm M3 button head bolts with…

Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant

Downloads
63
Likes
16
Rating
0
P
PrintablesSamael

Filament straightener

Now, it's easier to print a lower grip. I divided the grip into two parts and added a small feature to make it easy to fit the two halves. Supports are only used on the build plate. I also did dbranding because small areas between the…

Print approx. €2.43–€2.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
56
Likes
11
Rating
5
P
PrintablesRo3Deee

Optimised Prusa XL side filament bypass - UM2 Quick PTFE Pipe Coupling Collet

Should be printed în PETG (PLA is too britle). You can buy cheap UM2 collets pack (10 pcs - $2) here https://s.click.aliexpress.com/e/_oBiPN3h Also checkout the model with PC4-M6 Pneumatic Connector…

Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
55
Likes
10
Rating
5
P
PrintablesSpam Filter

Superior SpafilClip, filament clip

SpafilClip, the (IMHO) best and only 1.75mm filament clip you need. I prefer the self locking clips as they are not dependent on fitting a certain spool model. The downside is that they slip, or they put stresses on the filament causing…

Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant

Downloads
54
Likes
10
Rating
5
P
PrintablesRo3Deee

Optimised Prusa XL side filament bypass - PC4-M6 Pneumatic Connector

To hold the filament you can use the provided rod or an M3 bolt (≥10mm) Also checkout the model with UM2 Quick PTFE Pipe Coupling Collet https://www.printables.com/model/1133522-optimised-prusa-xl-side-filament-bypass-um2-quick

Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
52
Likes
10
Rating
5
P
PrintablesLuis

Original Prusa i3 MK3 ENCLOSURE Filament guide counterpart / Original Prusa i3 MK3 Gehäuse Filament Führung Gegenstück

The filament guide which is part of the original Prusa Lack table enclosure: ( https://www.printables.com/de/model/17-original-prusa-i3-mk3-enclosure-ikea-lack-table-pr ) works really well, but the bottom end doesn't really look good…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
51
Likes
9
Rating
0
P
PrintablesKon Bit

DIY Print Bed Filament Dryer PETG 65C 4hours

DIY Print Bed Filament Dryer PETG 65C 4hours added G28 W ; home all without mesh bed level to the G code like this G90 ; use absolute coordinates G28 W ; home all without mesh bed level G1 X100 Y200 Z200.0 F720 ; move x-axis to top to…

Print approx. €2.28–€2.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
50
Likes
7
Rating
0
P
PrintablesApfelhobbit

Hygrometer Mount for Drybox (Bresser)/ Halterung für Feuchtesensor in Filamentbox IKEA

Halterung für einen Feuchtesensor (&Temperatur) von Bresser (45x58mm). Zur Befestigung habe ich Inserts in M3 hinzugefügt.

Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant

Downloads
48
Likes
6
Rating
5
P
PrintablesAllpa

AHRTECH - Filament-Clip 2-way

Easy to print 1.75mm filament clip from AHRTECH with which the filament can be secured on the roll in two simple ways. Reliably prevents the independent unwinding and knotting of the filament. Due to the closed hole, the filament clip can…

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant

Downloads
47
Likes
12
Rating
0
P
PrintablesCoach Chambers

Prusa MINI Z-Tower Top Filament Spool Holder (No Bearings)

This filament spool holder is designed specifically for the Prusa MINI and mounts directly on top of the Z tower. It uses a fixed axle that runs through the center of the spool, preventing the common issue of spools falling off the stock…

Print approx. €5.97–€7.30 excl. taxPreliminary estimate for one variant

Downloads
45
Likes
6
Rating
5
P
PrintablesJon May

Leftover filament Prusament spool

I collected a lot of leftover filament over the years, and most of the filament is off the spool to save space. This often ends with a tangled mess that is hard to store and print. I modified a leftover spool by removing the inner tube…

Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
44
Likes
17
Rating
0
P
PrintablesPrinthero3d

Polymaker PolyDryer Box for Filament Drying

Rail System for Polymaker PolyDryer Box for Filament Drying This custom rail system is designed to hold up to five Polymaker PolyDryer Boxes, making filament drying more efficient and organized. Thanks to the removable cap design,…

Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant

Downloads
40
Likes
18
Rating
0
P
PrintablesPippo

MK4 Filament Gide

I printet in PETG with 15% Inf You need 2 ST ball bearings 608 ZZ 22*8*7

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
40
Likes
13
Rating
0
P
PrintablesFishbot

Filament spool spiner

print settings: infill 20% supports: no layer height 0.2

Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant

Downloads
39
Likes
13
Rating
3
P
Printables8BitSaint

Low Profile PTFE Filament Port for PC4-M10 Adapter

I wanted a very low profile filament port with a PC4-M10 fitting, so I made one. Why? I like PC4-M10 fittings I guess \_(ツ)_/ Pairs great with @katthulu's Spool PTFE holder , or my remix for… can you guess it? PC4-M10 fittings ! I…

Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
39
Likes
9
Rating
0
P
Printablesfr3nch13

UniTak3D Direct Drive Filament Runout Mount

UniTak3D Direct Drive Filament Runout Mount This is the 3D object that lets you mount the Filament runout sensor with the UniTak3D Ender 3 Direct Drive Upgrade Conversion Bracket . This is designed to work with the Original Creality Ender…

Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant

Downloads
37
Likes
7
Rating
0
P
Printablesbrookito

Filamnet clip with replaceable filament type marking

The filament clip is designed in two parts: 1. The body consists of a supporting part with a filament clip and a sliding mechanism 2. Insert on which there is an abbreviation for filament. The filament insert is designed so that it can be…

Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant

Downloads
37
Likes
2
Rating
0
P
PrintablesMatthew Schultz

Ikea Omar Wire Rack Articulated Filament Guide

Ok… this one is a bit specific; stay with me. I have my Prusa Mini+ sitting on an Ikea Omar metal wire shelf unit . (But… this will work on anything with 1" diameter round legs/supports.) I keep my filament in a Sunlu filament dry box…

Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant

Downloads
32
Likes
1
Rating
0