Search results: filler

Sort order

851 models

P
PrintablesHugoG

Filler - Filament Holder

This design solves all the basic necessities: Fits almost every object with a flat top surface and printer frame when customized. Can easily hold the weight of 1+ kg spools. Fits between other spools if necessary. In addition to the…

Downloads
8,694
Likes
1,711
Rating
4.89
P
PrintablesJakub Kříž

Compact Capsule Filler (00 size) with Credit Card Mixture Dispenser

Compact Capsule Filler with Credit Card Mixture Dispenser This compact capsule filler is designed to fill 24 capsules of size 00 in one batch using a credit card as a mixture dispenser. The capsule filler is made up of three functional…

Downloads
1,020
Likes
109
Rating
4.8
P
PrintablesPIZZA_CAT

LPG FILLER CAP (44 MM)

LPG Filler Cap for a hatch with a hole diameter of 44 mm. I can make a model for any size. Write in the comments. Thread M10 x 1.5. After printing, you can walk the die along the thread.

Downloads
230
Likes
22
Rating
5
P
Printableseli

Ford Maverick Seat Gap Fillers

I wanted fillers for the gaps between the front seats and the center console of my 2024 Ford Maverick so I don't lose stuff that could fall in the gaps. I made one for the passenger side and one for the driver's side. They are customized…

Downloads
166
Likes
29
Rating
0
P
Printablessparkstack

Miata oil filler funnel

Do you need this? Probably not. But if like me you are tired of holding both the funnel and the oil bottle; this will change your life. Designed for 1.6 MX5/Miata B6 engine. May fit other inferior generations of Miata. Print with the…

Downloads
165
Likes
23
Rating
5
P
PrintablesEtienne75

Oil filler cap dipstick for Eberth gas engine 5.5HP

Replacement cap for the oil filler of the motor. Made for an Eberth 5.5HP motor but may fit on other types of motors. ¾ in ANSI thread Printed on a Creality Ender 3 S1 using black PLA 1.7mm filament. I recommend to print in vertical…

Downloads
158
Likes
7
Rating
3
P
Printablesbenedikt314159

Bin filler and dispenser for smaller parts, especially for WAGO clamps

Bin filler and part dispenser for Honeycomb storage system Functionality With this model you can fill up your storage bins easily and fast by just pressing the bins against the front lip of the slider. A spring will bring the slider back…

Downloads
147
Likes
128
Rating
0
P
PrintablesBlinkSTOP

LCD to frame gap filler for MK3.5, MK3.9, MK4 & MK4S* (4 separate models, *see note below)

If slicing yourself, orient with the text face on the bottom Prints without supports Print in PETG Sliced at 0.15mm layer height using Prusa 0.15mm structural default settings for PETG at 245°C. Gcode provided is for MK3.5 * warning - one…

Downloads
104
Likes
17
Rating
4.67
P

Overview/test of fillers / přehled/test výplní

17 fillers from PrusaSlicer 17 výplní z PrusaSliceru

Downloads
73
Likes
9
Rating
5
P
PrintablesKarolis

ParkTool Grease Gun Filler Refined

Refined Simon's grease filler. Prints a bit better and faster. No supports needed. 2 perimeters is enough. Attaching f3d file if anyone wants to tweak it.

Downloads
53
Likes
9
Rating
0
P
PrintablesOBConcepts

Tesla Model Y Back Seat Cup Holder Filler

Whenever riding in the back seat of the Tesla Model Y, if you lean on your elbow onto the arm rest, the elbow sometimes falls into the cup holders. This print allows for filling those cup holders when not in use and thus, stop the…

Downloads
38
Likes
13
Rating
0
P
PrintablesSlacker

Filler for empty slide channels

Fills holes not used to stack. Also fills sides based on closing out the bottom of a stack.

Downloads
34
Likes
5
Rating
4
P
PrintablesDanB

Hole Filler for DELACK Enclosure

Hole Filler for DELACK Enclosure on the top.

Downloads
20
Likes
1
Rating
5
P
PrintablesGijs

Sliding Door Lock / Latch with optional Filler Block

Print as the attached .3mf files (for 0.6mm nozzle) to get the best strength for the parts. The filler block should be adjusted to match your door, and can be left away of course if there is no height difference. In my case the height was…

Downloads
3,760
Likes
671
Rating
4.97
P
Printablesicefox

Soap holder with locked filler

I liked the original design but found three issues. First the holder is too shallow for bigger soaps. Second the filler just sits freely and is easily flipped when I pick up the soap. Third the flat bottom is too slippery on flat wet…

Downloads
2,827
Likes
507
Rating
4.92
P
Printablessquinn

Car Seat Gap Filler Storage Caddy

Make better use of that small gap between your seat and center console by sliding in this nice catch-all tray, which includes a space to hold a soda can at the front. The main part of the tray is sized large enough to adequately hold…

Downloads
1,302
Likes
614
Rating
4.6
P
Printablesvidision

Basic Flat Shoe Inserts / Insoles / Filler

I needed 3mm flat inserts for a pair of boots to fill space under other third-party insoles. I made these and sized them to match the original inserts. Paired with the new insoles, the boots are a great fit. Now that I've started this, I…

Downloads
1,206
Likes
103
Rating
5
P
Printables努努

Creality K1 door gap filler with supplementary drawer (門縫填補+小抽屜)

" Creality K1 door gap filler with supplementary drawer" This design aims to utilize the gap space between the door and the chamber itself. By filling up this gap, it enhances the chamber's sealability and provides a storage area for…

Downloads
1,185
Likes
166
Rating
5
P
PrintablesTianZi

Creality K1 270° Corner Mounted Removable Door Hinges w/ Air Gap Filler

Note: Does NOT work on the K1 Max. Design Summary: The Creality K1 is an excellent printer, but Creality's choice of door hinges is questionable. A partially opened glass door simply seems like an accident waiting to happen. I looked at…

Downloads
1,154
Likes
218
Rating
4.69
P
PrintablesPapaBravo

Sealant Grout Filler Scraper/Removal Tool

Sealant Grout Filler Scraper/Removal Tool A tool based on a similar commercially available sealant removal tool. It can help remove or scrap away silicon rubber sealant, caulk, grout and other fillers. Especially for silicon, you should…

Downloads
999
Likes
96
Rating
4.9
P
PrintablesAndyBarts

Joint Cone Filler Funnel with base & stem

This is a model of a cone filler I found on thingiverse, it honestly is a lifesaver and it works like a charm

Downloads
959
Likes
85
Rating
0
P
PrintablesLowRob

Filler Filament Spool Holder - Prusa Remix

This is a remix of the popular "Filler" Filament Holder. I love this thing and i use it with all my printers. It is a remix for the stock supplied Prusa brace! Fits perfect. The Roller is the original from HugoHuge. Thanks for the great…

Downloads
682
Likes
116
Rating
4.84
P
PrintablesDrrag0nGh0st

Filler cap for water tank

Filler cap that screws onto the water inlet spigot of a motorhome. The cap has an integrated air and overflow vent. Due to the relatively high Shore hardness of most FDM TPU materials, the gasket is designed to be hollow to allow for…

Downloads
635
Likes
96
Rating
5
P
PrintablesTaewon

Creality K1C Door Hinge 270 Dgree (No Gap Filler Version)

📌 Creality K1C 270 Dgree Hinges (no Gap Filler) This model is a remix of TianZi's work from Printables. Thank you for sharing such a great model. Original and installation guide:…

Downloads
615
Likes
72
Rating
2
P
PrintablesVirtualmisterl

Thrustmaster TH8A gear shifter gear blockers/fillers

I found that when using the thrustmaster th8a shifter on cars with less than 7 gears, i would sometimes accidentally put it in a gear that didn't exist. These gear blocker/fillers eliminate that issue when you are driving a car with 4, 5…

Downloads
592
Likes
75
Rating
5
P
PrintablesRC builder

Primer filler for Dillon primer pickup tubes

Designed to fill Dillon primer tubes with primers, both small and large. This is a multipart model, print files are provided merely as sample, as modifications of print conditions on user side are assumed. Important notes: Device…

Downloads
548
Likes
67
Rating
4
P
PrintablesEngidahvs

Bambu X1C Side Mount Spool Holder v2 for Filler - Fillament Holder

Start with BC's excellent spool holder mount, add in a touch of BobbyMcWho's simplified back, incorporate Aikano9's adapter for HugoG's wonderful Filler - Filament Holder, add a chamfer to use less support and there you have it. All…

Downloads
539
Likes
94
Rating
5
P
PrintablesJahn Roux

1200GS Oil Filler Cap Tool

The boxer engine in the BMW R1200GS (and other models with the 1200 boxor motor, 1250 and maybe even the 1150) requires a special tool to open. I decided to draw this up and share it for others that may be missing the special tool…

Downloads
522
Likes
32
Rating
5
P
Printablessliverbaer

Spool Holder for Kingroon KP3S Pro (S1) - Low height spool-holder Remix + Filler

This is a top spool holder for Kingroon KP3S Pro S1. (Mine is from Sliceworx.) So far it has been working great for me. The arm is a remix of Low hight spool-holder v23 for Kingroon KP3S, Aquila & Ender3 So that the roller of the Filler -…

Downloads
495
Likes
73
Rating
4.83
P
PrintablesBasementLAB

BMW - Oil Filler Tool/Wrench all R models 2004-2024 - Single Grip / Double Grip - Chiave Per Rimozione Tappo Olio BMW Motorrad

BMW Motorrad Oil Filler Tool / Wrench - All - R models 2004-2024 - Single Grip / Double Grip - Chiave Per Rimozione Tappo Olio BMW Motorrad This is a 3D-printable version of the essential BMW oil filler cap removal tool (OEM Part:…

Downloads
483
Likes
34
Rating
5
P
PrintablesMST8K

Circuit Breaker Filler Plates (Cover)

Two different sizes and different number of spaces for an electrical panel cover. I reinforced the tab from the original model to keep it firmly in place. The photo shows a 2-UP and 4-UP configuration. You can scale to fit your panel if…

Downloads
481
Likes
42
Rating
5
P
Printablestonycwang

Lee Universal Case Feeder Tube Filler

I never bought the Lee Case Collator, but kept hearing how much easer it makes loading the case tubes on the Universal Case Feeder. So, what do you do when you have a 3d printer? Design your own and print it! My design is a 2 part design…

Downloads
469
Likes
41
Rating
4.67
P
Printablesscotcob

RV/Motorhome/Campervan Water Filler System

After numerous visits to campsites I decided to design and print a suitable water filling system that allowed easy water filling at the camp water points. The design includes capability to fill from hose connection or water containers via…

Downloads
463
Likes
122
Rating
5
P
PrintablesNeme.C

Воронка для маслозаливной горловины автомобиля Тойота, двигателя 4GR-fse, резьба М37х3мм. Funnel for oil filler neck of Toyota car, 4GR-fse engine, thread M37x3mm

Воронка для маслозаливной горловины автомобиля Тойота, двигателя 4GR-fse, резьба М37х3мм Funnel for oil filler neck of Toyota car, 4GR-fse engine, thread M37x3mm

Downloads
450
Likes
25
Rating
5
P
PrintablesVP-MFG

Shockbottle hundo case gauge filler

Shockbottle hundo case gauge filler. This is for 9 and I have included the fusion 360 file if you would like to change anything.

Downloads
448
Likes
29
Rating
4
P
PrintablesItaymbere

PET Filler Filetador

Recycle your PET bottles with this tool! This is a simple yet useful pet bottle cutter, follow instructions on YouTube, its in Portuguese but you can enable subtitles and follow just by watching carefully. Playlist Tutorial:…

Downloads
433
Likes
30
Rating
0
P
Printablesdancan13f

8/15.Accessories extension (Oil Filler, Sensors, Connectors, ...) for the LS3 Chevy Engine

This is Accessories extension for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). Print instructions Printer Brand: Prusa Printer: I3 MK3S Resolution: 0.15mm Filament: Geeetech PLA Silk silver, black, bronze and yellow…

Downloads
397
Likes
67
Rating
5
P

Size 000 Capsule filler base

This capsule filler design is my take on MJHeed's capsule filler (link). First, I modified the scale to accept size 0 capsules. You can resize this for any capsule size by setting the scale to a ratio of the (x,y,z dimension of your…

Downloads
396
Likes
33
Rating
0
P
Printablesmattmak3s

K1C Door Gap Filler Plate Version 2

VERSION 2 Screen does not have to be removed for installation, just removed for display purpose. K1C Glass Door Gap Filler Plate to reduce chamber heat leakage, thus helping achieve higher chamber temperatures (up to 60 degrees C) for…

Downloads
394
Likes
44
Rating
5
P
Printableskai

Filler Under mount hanging spool holder for Prusa LACK

Modify the under mount wire hanging filament spool to mount under the Prusa LACK enclosure. I use one 1-1/2" pocket hole screw and one normal screw to mount on the shelf. Include the link to OnShape, feel free to modify it.

Downloads
381
Likes
84
Rating
5
P
PrintablesMTang

Filler - Filament Holder - Safer Roller

I liked the original but found that the roller's smooth shape made it too easy for reels to ride up the sides and fall off. I've designed this with a 60-degree slope that will still print well and a sharp transition to lessen the…

Downloads
373
Likes
49
Rating
5
P
PrintablesGOATDIY

Prusa LACK enclosure gap fillers

Credits to cisardom for thing https://www.thingiverse.com/thing:2864118 and Mikolas Zuza for the guide https://blog.prusaprinters.org/cheap-simple-3d-printer-enclosure/ I was a bit unhappy with the final build because cutting the plexi to…

Downloads
362
Likes
74
Rating
4.33
P
PrintablesBuildX

#0183 Car Seat Gap Filler [multiple options]

*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** This car seat gap filler is robustly designed in 2…

Downloads
360
Likes
59
Rating
5
P
Printables6d6178

Filler Spool Holder Brace for Prusa MK3, MK3S, MK3S+, MK4 compatible with Prusa Filament Guide

This is an adjusted version of the Prusa brace for the Filler Spool Holder that positions the spool in the exact same location as the stock Prusa spool holder relative to the frame. Looking for a brace for the Bear frame instead? Check…

Downloads
359
Likes
61
Rating
5
P
PrintablesAG

Ender 3 & Sovol Extrusion slot fillers dust prevention

Thin fillers to go in the front and back 4040 rail slots. There are 8 visible slots on the top of the S3 V2 Neo, plus more around the sides so print as many as you need. Can either be remodelled to shorten, or cut with scissors! The model…

Downloads
351
Likes
45
Rating
5
P
PrintablesJonne Terlouw

Oil filler cap tool R1200RT

I needed a tool to loosen and fasten the oil filler cap on my 2005 BMW R1200RT. Since the RT is covered in plastics, the model I treid, made by @JahnRoux did not fit, so I remixed it in a way that it would fit. It probably will fit the…

Downloads
346
Likes
19
Rating
5

Gardena tub/ container/ swimming pool filler hook

A simple solution to fill tubs without holding the house or the chance that your hose will jump out of the tub. the Model is designed to print with minimal supports (only support for the gardena coupler is necessary for a good fit). The…

Downloads
336
Likes
40
Rating
5

Ram slot filler for RCBS reloading presses

To prevent spent primers jumping all over the place, you can insert these fillers into the slot of the ram of your RCBS press. Both have the same function, the T-shaped one comes out with the shell holder, the other one can stay in the…

Downloads
317
Likes
39
Rating
4
P
PrintablesWnrsm

QOFP Square D QO Breaker Blank Filler Plate

These cost $2-4 each. This design has a solid back to decrease the chance of layer separation. Print in ABS or PETG - black Use “supports everywhere” (snug) to support the little latches. Use a textured plate and they will look like the…

Downloads
308
Likes
11
Rating
0
P
PrintablesNouyame

Bambu Lab P1P Pegboard Mount - Filler Filament Holder

Updated: there are now two version as requested, one with a 4 degree upward angle, and another (original) with 8 degree. I have been using the original 8 degree version without any issues, but some users have reported this was too much…

Downloads
307
Likes
59
Rating
5
P
PrintablesLong

SimLab XP1 Pedal Hole Plug/Filler Sim Racing

Changelog: 2025-04-25 Added [XP1 Plug - Angled Print - Short Curved - Bolt in Lower Hole] Note this hasn't been tested yet Due to the Bolt, there has to be a big hole. The only way to make the big hole smaller is to make the plug protrude…

Downloads
305
Likes
11
Rating
0
P
PrintablesPogFrog

Card Deck Box TCG Vault X Adjustable Spacer / Screw / Divider / Twist Jack / Gap Filler

Adjustable Card Spacer I made this adjustable spacer so you can make sure your cards sit upright at all times. It's basically two plates that attach to a screw and threaded barrel at either end. You pop the plates into your box and expand…

Downloads
299
Likes
67
Rating
4
P
PrintablesDarthxRinzler

Bambu X1C Side Mount Spool Holder for Filler - Extended Fillament Holder

I took Engidahvs' model, along with the PC4 M10 arm from BC, and extended it out 25mm to be more centered with the spool. I then joined them so it can be printed as one, solid model and added an elongated support so it's sturdy. This is…

Downloads
297
Likes
49
Rating
5
P
PrintablesScott Paladin

Honeycomb Storage Wall Filler

Honeycomb Storage Wall Fillers Decorative filler pieces for RostaP's Honeycomb Storage Wall system that cover the empty space (and potentially unsightly wall) behind your storage setup. These come in full, half (vertical and horizontal),…

Downloads
293
Likes
103
Rating
5
P
PrintablesFotsyrk

airsoft filler

Easy way to fill your fast filler in airsoft. No more lost bbs when filling fast filler. No need for supports.

Downloads
288
Likes
51
Rating
5
P
Printablesreturn403

RAM Memory Module DIMM Filler Blank

DIMM blanks are used to fill unused memory DIMM slots in a rack-mount server. Filling these slots helps to ensure that airflow through the server from the fans is directed as designed, optimizing cooling. Included are DIMM blanks…

Downloads
284
Likes
51
Rating
0
P
PrintablesAikano9

Bambu X1C side mount spool holder v2 to Filler adapter

Created an adapter so that I could use my already printed filler spool holder on the side mounted spool holder V2

Downloads
283
Likes
45
Rating
0
P
PrintablesR4Z0rKn0wz

Raw King Size Cone Filler

This beautiful box is designed to easily pack 20 King Size Cones at once ! It works very well and you can use your herbs without any stress now... This box is an absolute must for all real stoners out there. No more stress to roll a…

Downloads
282
Likes
20
Rating
0
P
PrintablesJoe

Zero Height Gridfinity refined bins ("flat top" "Grid fillers" "void filler" "blank")

This is a collection of zero height gridfinity refined bins. bins without walls (and floors - see note). They make for nice flat filling. they make for easy widget making (build stuff on top - I included solidworks files since there…

Downloads
275
Likes
30
Rating
4.5
P
Printables6d6178

Filler Brace for 2040 Extrusion (Prusa Bear, Sidewinder X1, etc.)

This is a brace for the Filler Spool Holder by HugoHuge to work with 2040 aluminum extrusions instead , such as those used by Prusa Bear, Artillery Sidewinder X1, or Artillery Genius. It's based on the brace for the Prusa MK3S so it has…

Downloads
274
Likes
48
Rating
5

SBA3 Pistol Brace Filler Block Minimalist

SBA3 pistol braces deform under transport, safe storage, and handling. Keep that brace looking well-shapen and rigid for photos and leaning up against stuff. There are other brace fillers, but they had infill. Seemed like a waste of print…

Downloads
273
Likes
11
Rating
0

PVA bag filler carp fishing

PVA filler by Tommy

Downloads
271
Likes
29
Rating
0
P
Printablesonsimon

Voron 2020 mount for the Filler filament spool holder

Filler filament spool holder mounts for vertical and horizontal 2020 extrusions on Voron printers. The vertical extrusion mount comes in mirrored versions for different locations: A: rear left and front right B: front left and rear right…

Downloads
268
Likes
55
Rating
4.75
P
Printablesmcko

Stackable Epoxy Resin Mixing TRAY Glue Filler 4x5cm

Stackable Epoxy Resin Mixing TRAY Glue Filler 40x50mm

Downloads
260
Likes
39
Rating
5
P
PrintablesHitic_

BMW oil filler funnel

over enginered oil funnel, solid and wont move when pouring oil,

Downloads
259
Likes
22
Rating
0
P
PrintablesOrdinaryWonder

5.56/223 Snap Cap Casing Filler

My attempts at printing whole 5.56 snap caps failed, because the rim would get ripped off. This version just fills the casing to make it feed correctly. It runs the length of the cartridge to help get a consistent length. If you don't…

Downloads
257
Likes
27
Rating
0
P
PrintablesStreelyDan

Wire shelf hanging spool holder for Filler spool holder

This is a hanging spool holder for the Filler customizable spool holder system. It has been designed to work with wire rack shelving with 30mm spacing between the wires. This was a first try and is not perfect but it holds the Filler very…

Downloads
256
Likes
73
Rating
5
P
PrintablesPeterH1500

Oil Filler Funnel for Volvo (XC60 II D4 & other models)

This is a lightweight filler funnel to assist with oil filling and topping up for a Volvo XC60 D4. It fits the oil filler opening nicely and incorporates air channels to allow air to escape as oil flows into the engine. This probably also…

Downloads
254
Likes
20
Rating
5
P
PrintablesIam74Niner

09-14 F150 Center Console Filler for Empty Shifter Space

Center Console Filler for Empty Shifter Space

Downloads
247
Likes
9
Rating
5
P
PrintablesAbsolootly_Joob

53 mm Blazy Susan cone filler & packer

Remix on a remix , used for packing the 53 mm or stubby or dog walker joints from Blazy Susan. Not the prettiest, but she fits real good like. Ayyyuup. Post any comments, concerns, or makes k thnx bye. <3 Standard .2 layer height works…

Downloads
241
Likes
24
Rating
0
P
PrintablesSDeath

Filler - The Customizable Filament Holder that fills your printer! + 20mm longer

Just added 20mm to the roller and guide to allow wider filament spools. Print instructions Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.20 Infill: 10 & 50% Filament: 123-3D Jupiter PLA White

Downloads
231
Likes
24
Rating
5
P

Shelf Hole Cover Plugs / Filler (e.g. IKEA METOD, PAX, BILLY, IVAR, BESTA, PLATSA)

Summary Conceal unused shelf holes in cabinets and bookcases for a cleaner, more refined look – particularly effective in open furniture without doors. Compatibility Tested on IKEA furniture as well as other brands, ensuring compatibility…

Downloads
228
Likes
47
Rating
5
P
PrintablesStoyka13

Volkswagen Transmission Filler Nozzle M10x1.0

This nozzle is meant to thread into the bottom of the transmission oil pan on VW 6spd automatic transmissions. (My car is 2010 VW Golf 2.5 Auto. I was doing a fluid flush on the transmission in my garage and didnt realize I needed a…

Downloads
227
Likes
26
Rating
0
P
Printablesscarrson

Electrical Knockout Fillers / Plugs - 1/2" to 2"

Options provided for ½", ¾", 1", 1-¼", 1-½", 2" knockout holes. Simple prints that thread together perfectly, use the included nut, thumbwheel, or use your own 3/8-UNC nuts. Dimensions: These are sized for standard KO's, but all…

Downloads
227
Likes
42
Rating
5
P
PrintablesMrKrueger

Doorstrap filler for Ami/Rocks-E/Topolino

Not my model, just re-uploading here for everyone to enjoy and to make a complete collection on here . A small gap filler that goes around the door pull straps of an Ami/Rocks-E. Should help to keep the cold/breeze out, since the doors…

Downloads
226
Likes
4
Rating
0
P
Printablesfloano

Oil filler funnel

Needed a funnel with the right height and angles for my V6 for an oil change. Made this. Should be printed with a filament that has some resistance to chemicals. The example is printed in PETG. The walls are 1.8mm thick, so the funnel is…

Downloads
220
Likes
21
Rating
0
P
PrintablesGael Lafond

Capsule filler

I suffer from migraine. A few years ago, I discovered that Taurine, an amino acid, does miracles to fix them. I can purchase taurine in different form: Energy drink Pros: Ready to consume Cons: Contains a lot of products I do not need…

Downloads
217
Likes
43
Rating
4
P
Printables6d6178

Prusa Filament Guide for Filler Spool Holder

This is an adapted version of the Prusa Filament Guide to work with the Prusa Filler Brace . It is single-sided and lengthened so that the guide hole is in the center of the spool. It's made specifically to work with modified Prusa Filler…

Downloads
215
Likes
26
Rating
5
P
PrintablesPidrittel

Bambu Lab Spool Holder (HugoHuge Filler compatible, incl. Easy-Print-version of FillerGuide)

HugoHuge Filler spool holder mount for the Bambulab X1C (fits P1P too). Does not work with the original HugoHuge filler guide, sice it is higher and would collide with the AMS plug. I attatched an easy-print-version of the original part…

Downloads
210
Likes
38
Rating
5
P
PrintablesGabC

Filler Skadis bracket

Designed for the Filler spool holder . You will need two of my universal peg plate to mount this to your Skadis board. You can design your own pegs if you want to use on another type of board and reuse the rack.

Downloads
208
Likes
78
Rating
5
P
PrintablesPeterH1500

Screenwash Filler Funnel for Porsche Cayenne 957

This is a thin and light filler funnel to assist with filling screen wash in a Porsche Cayenne 957. It may fit other Porsche models and other VAG vehicles (Volkswagen, Audi & Skoda ) (but I don't have any of these to test!). It fits…

Downloads
201
Likes
29
Rating
0
P
PrintablesTritschi

TPU-Profile Filler for 2020 Profile (here: MK4-Enclosure)

Having black anodized 2020 profiles for my MK4 enclosure I close the gaps (for cables, for dirt, for debris) with an orange TPU profile. The attached stl file has only a certain length of maybe 150mm, in your slicer you should be able to…

Downloads
200
Likes
56
Rating
5
P
Printablesdodasch

Cone Filler Funnel for King Size Pre-Rolled Cones (109mm)

This Cone Filler Funnel is designed for King Size pre-rolled cones (109mm) and has been tested with RAW and Purize cones . It makes filling your cones quick and clean. Features: Slide-on cap to hold the cone securely in place. Locking…

Downloads
199
Likes
29
Rating
5
P
Printablesconflag

Filler - brace adapter for Elegoo Neptune 3 Pro / Plus / Max / Neptune 4

Remix of popular bearing filament mounting system - https://www.printables.com/model/174620-filler-filament-holder Fit is very good, it holds tight. Printed in PETG but PLA would also be fine. 0.20 layer height, 15% infill, standard…

Downloads
198
Likes
49
Rating
5
P
Printableseof

Core One Gap Filler between LCD and Frame / CoreOne Spaltfüller zwischen Display und Rahmen

At my Core One, dust and debris accumulate in the gap below the door between the frame and the display. This clip fills that gap.

Downloads
194
Likes
57
Rating
4.93
P
Printablesdrhollen

Capsule Filler - Size 0 - 6x6

Our dog has a digestive disorder, so we have to feed her medicine with each meal and one of the meds is very bitter. It is in powder form, so my wife was filling capsules by hand, so I made this capsule filler. It simply holds Size 0…

Downloads
192
Likes
11
Rating
0
P
PrintablesPeter K

Scraper Dacia mount fuel filler cap

Window scraper, it can be mounted on the fuel filler flap of Dacia Duster mk1 2009-2017. Additionally, I provide a version of the scraper without a handle. Scraper Dacia - Mount handle: model with a handle for mounting on the flap. Mk2 -…

Downloads
191
Likes
39
Rating
5
P
PrintablesPierre

Prusa LACK enclosure gap fillers remix

this is a remix of GOATDIY for the LACK enclosure gap fillers. https://www.prusaprinters.org/prints/17934-prusa-lack-enclosure-gap-fillers Great design and much better looking for the IKEA enclosure. However it seems there is a problem on…

Downloads
186
Likes
44
Rating
4
P
PrintablesEulogy

QIDI Plus 4 Filler Spool Holder Remix

Had this on my Ender 3v2 and loved how smooth it was so thought I'd make one for the Plus 4! Using Dan Lavoie's model to capture the base mounting point for the original Plus 4 spool holder I was able to remix HugoHuge's Filler Filament…

Downloads
185
Likes
25
Rating
5
P
PrintablesDuderino

Filler - Filament Holder Ceiling Mount

Filler - Filament Holder is the BEST filament holder for me and I tried a few. I had a use case where my printer in an under stairs closet, so I needed to mount from the ceiling. I remade this model using shapr3D instead of tinkercad…

Downloads
184
Likes
23
Rating
4.75
P

Size 000 capsule filler multi-tool

This is a multi-tool for my Size 000 Capsule Filler. It is used to scrape powder into the capsules, compress the powder, and lift them out of the filler. PRINTING INFO: Print 1x base and 10x pegs . Nine are fitted into the divots, and one…

Downloads
180
Likes
9
Rating
0
P
PrintablesWire

TIG filler rod tube dividers

Collection of 4 divider designs make to fit Blue Demon RST-36 TIG filler rod storage tubes 2 compartment 50/50, 3 compartment 50/25/25, 3 compartment 33/33/33, 4 compartment 25/25/25/25 No special printing requirements. Did mine with a…

Downloads
180
Likes
20
Rating
0

IKEA BROR filament spool mount (Filler adapter)

This simple model allows to mount Filler on both sides of IKEA BROR shelving unit in both directions - parallel or facing back of the unit. There's no left/right version so it's easy to switch to other mount point. You will need at least…

Downloads
179
Likes
48
Rating
5
P
Printables6d6178

Filler Spool Holder Brace for Prusa Bear compatible with Prusa Filament Guide

This is an adjusted version of the Prusa brace for the Filler Spool Holder for the Prusa Bear Frame that positions the spool in the exact same location as the stock Prusa spool holder relative to the front edge of the frame / top…

Downloads
178
Likes
33
Rating
5
P
PrintablesMiller Bro

Napoleonic Cavalry Line Filler

done as work in trade by request; shared here for people who have a ton of extra heads and right arms and want more Cavalry 2019-12-21 Edit:added basic head and arm set

Downloads
175
Likes
10
Rating
0
P
PrintablesLextone

Lotion Bottle Coupler re-filler thing

Salvage that last little bit of lotion! Simple bottle to bottle coupler to get your moneys worth out of that bottle of lotion. Its not threaded so it can be used on any bottle, Just scale up or down to meet your needs. There is an offset…

Downloads
175
Likes
37
Rating
5
P
Printablesjean dupont

eSun spool adapter and gap filler for Bambu spools

This is an adapter ring used for 2 things: Being able to insert eSun refills which have a wider cardboard center than Bambu spools To fill the gap on the Bambu Lab spool when refill eSun which is narrower than the Bambu spool If we don't…

Downloads
174
Likes
19
Rating
5
P
PrintablesConfused

TIG Filler Rod storage tube holder

I just knocked myself up a quick basic trolley for my R-Tech Welding TIG welder to free up some bench space, and wanted to store all the filler rods a bit nicer than just lobbing the tubes in a corner. The filaments come in a 32mm…

Downloads
172
Likes
22
Rating
5
P
PrintablesBryan

Shockbottle Hundo Case Gauge Filler remix

Many thanks to VP-MFG for providing the original design files. My friends and I were having issues printing this with supports, so I modified the files to have it print in two parts. Material selection and layer height are up to your…

Downloads
172
Likes
9
Rating
0
P
PrintablesJohn Lindale

Cone Filler (25 slots) - RAW 1 1/4 size

This 3-part cone-filling jig fills cones faster, allowing for faster filling of cones. Our unpatented cone-filling technology fills cones faster than some other methods of filling cones probably. If what you need is to fill cones fast,…

Downloads
171
Likes
14
Rating
0