Search results: fini

Sort order

Counting matching models…

P
Printablesfifindr

Infinite Cube - No Supports, No Glue

Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Introducing the Infinite Cube, now optimized for faster printing and minimal material usage! This version is divided into three parts, eliminating the…

Print approx. €3.54–€4.33 excl. taxPreliminary estimate for one variant

Downloads
12,353
Likes
2,981
Rating
4.77
P
PrintablesGlennovitS 3D

Gridfinity Baseplate (Quick print, lite version, less filament)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
10,098
Likes
1,129
Rating
4.96
P
Printablesfifindr

Mini Infinite Cube

The Mini Infinite Cube is a geometric decor piece with no start or end , creating a mesmerizing, endless loop design. It’s a perfect minimalist decoration for any desk or shelf. 🧊✨ ✅ Endless geometric design for a unique aesthetic ✅ 3…

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant

Downloads
6,122
Likes
1,039
Rating
4.82
P
Printablessacrilegor

Dremel box organiser - Gridfinity based

I wanted to put all my Dremel accessories in the Dremel box, included in my new set, but the sponge inserts wasted soooo much space. So I decided to make it fit. First I tried to design a 4 piece design, but that would lack modularity, so…

Print approx. €1.69–€2.07 excl. taxPreliminary estimate for one variant

Downloads
4,546
Likes
1,481
Rating
4.92
P
PrintablesThe Next Layer

Gridfinity Caliper Holder - Low Profile Space Saving

This is a caliper holder for the gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother put battery holes in it, because I…

Print approx. €2.96–€3.62 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4,012
Likes
569
Rating
4.71
P
PrintablesThreeAttic1

Stronger Yet Another Fidget Infinity Cube V2

This is (hopefully, don't actually know) a strong version of Yet Another Fidget Infinity Cube V2. I noticed that whenever it broke it was almost always on the part of a hinge that goes in side one of the cubes. To fix this, I just made it…

Print approx. €3.12–€3.82 excl. taxPreliminary estimate for one variant

Downloads
4,004
Likes
145
Rating
4.89
P
PrintablesMoorfeusCZ

Infinity cube

My version of the infinite cube. Created in FreeCad. Designed and tested with nozze width 0.4mm and layer height 0.2mm PLA on the Prusa Mini +.

Print approx. €2.67–€3.26 excl. taxPreliminary estimate for one variant

Downloads
3,501
Likes
264
Rating
4.75
P
Printablesdemek

Ultimate Kobayashi Infinity Cube

This model has 0,4mm tolerance. If you need less or more tollerance let me know in comment, i have project with parametric design so can add any tollerance. On pictures you see 70% rescalled print (black cube). For best results I suggest…

Print approx. €4.51–€5.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,417
Likes
425
Rating
4.85
P
Printablesfifindr

Infinite Cube

Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Introducing the Infinite Cube , a mesmerizing blend of geometry and minimalism! With its 111 mm dimensions on all sides, this artistic sculpture adds a…

Print approx. €7.08–€8.65 excl. taxPreliminary estimate for one variant

Downloads
2,405
Likes
419
Rating
5
P
PrintablesMBLX

The Infinity Pen Holder: A Minimalist Organizer

The Infinity Pen Holder is more than a simple desk organizer. With its clean, minimalist design inspired by the infinity symbol, this unique piece is the perfect blend of form and function. This model helps keep pencils, pens, and other…

Print approx. €4.12–€5.04 excl. taxPreliminary estimate for one variant

Downloads
2,266
Likes
532
Rating
5
P
PrintablesAquaMorph

Gridfinity Deburring Tool

Part List Part Quantity Link 6x2mm 4 Amazon This is a gridfinity holder for a Deburring Tool, a Pointed Tiles Cutter Pen, and 15 extra blades. Mine was made by YUFUTOL but it seems like a generic designed with other brands on the design…

Print approx. €3.30–€4.03 excl. taxPreliminary estimate for one variant

Downloads
1,919
Likes
292
Rating
4.9
P
Printablesjoshfish

Infinity Fidget Cube

If the print fails, try to print a 50% speed.

Print approx. €1.83–€2.24 excl. taxPreliminary estimate for one variant

Downloads
1,710
Likes
147
Rating
1
P
Printableshoco

Gridfinity Caliper Stand

This 1x2 gridfinity module holds a digital caliper horizontally. It is stable even without a baseplate. This model prints without supports, but I recommend watching the first layer go down to ensure the circles around the magnets all…

Print approx. €2.18–€2.67 excl. taxPreliminary estimate for one variant

Downloads
1,558
Likes
404
Rating
4.93
P
PrintablesBram

Xiaomi Wowstick 1F+ #Gridfinity holder

Design description This is a gridfinity holder for the Xiaomi Wowstick 1F+ (plus) and its 56 bits. Also holds the base and (de)magnetizer. May also be compatible with the 1F Pro, not sure what the differences are. Based on ZachFreedmans…

Print approx. €9.65–€11.80 excl. taxPreliminary estimate for one variant

Downloads
1,475
Likes
293
Rating
4.92
P
Printablespejvl2000

Screws labels for Gridfinity Bin

Screws labels with pictures of DIN912 screws

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant

Downloads
1,201
Likes
440
Rating
5
P
PrintablesEdgar.A

Infinite tape dispenser

Here is an infinite tape organiser and dispenser with two measure, 55mm and 30mm. All the pieces are 3d printed. I recommande you to not use the printer files it just an exemple to show an idee of time and mass that will use for this…

Print approx. €12.10–€14.79 excl. taxPreliminary estimate for one variant

Downloads
1,102
Likes
311
Rating
4
P
Printablesargoroots

Gridfinity base for Systainer 3

Gridfinity base grid for Festool Systainer 3 toolbox. Print 4 pieces and glue together or just in one piece if you have a large printer.

Print approx. €3.39–€4.14 excl. taxPreliminary estimate for one variant

Downloads
901
Likes
145
Rating
5
P
PrintablesWekster

Thanos - Avengers Infinity War

Check out my other stuff in my patreon page www.patreon.com/wekster and on my youtube www.youtube.com/wekster

Print approx. €3.05–€3.72 excl. taxPreliminary estimate for one variant

Downloads
899
Likes
244
Rating
5
P
PrintablesIllia Shekera

Gridfinity Pen/Sharpie Stackable Tray 4x2x4

Features: - suportless magnet holes - easy to get the pen or sharpie from tray - stackable design

Print approx. €3.77–€4.60 excl. taxPreliminary estimate for one variant

Downloads
839
Likes
104
Rating
4.89
P
Printablesschuetzi99

Infinity Cube with balls inside

The special thing about this Fidget-Cube in comparison to similar constructions is: there are balls inside the cubes (please do not ask for the deeper meaning, it's a toy) the cubes can be printed individually, in different colors and…

Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant

Downloads
770
Likes
179
Rating
4.77
P
PrintablesIsItBrokenYet

Yet Another Fidget Infinity Cube Rounded - Smaller, Stronger and Tighter.

Printing Tips This model is sized for a 0.1 mm layer height anything more than that will probably fuse. The space between the model and the hinge is a single layer at 0.1 mm. If the hinges are sticking an adjustable wrench can provide…

Print approx. €3.63–€4.44 excl. taxPreliminary estimate for one variant

Downloads
683
Likes
80
Rating
5
P
Printablesclovisd

Filament Sample Box w/ Infill, Fill Patterns, and Finish Types [REMIX]

This is a slight modification (added text, print settings, etc) and print preparation for printing your own 3D Printing Settings sample box featuring various Infill types, Finish types, and Surface pattern types. The following Patterns…

Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant

Downloads
623
Likes
150
Rating
5
P
Printablesfhessel

Gridfinity Generic DevBoard Holder

This holder allows to store development boards with pins mounted on the bottom in Zack Freedman's Gridfinity system . As such boards come in various sizes (e.g. different ESP8266 or ESP32 boards, Raspberry Pi Pico, Arduino Nano, …), the…

Print approx. €4.76–€5.81 excl. taxPreliminary estimate for one variant

Downloads
568
Likes
122
Rating
4.88
P
PrintablesKevin Barker

Gridfinity Bin for Prusa Nextruder Nozzles

There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…

Print approx. €4.77–€5.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
567
Likes
146
Rating
5
P
Printablesx3Design

Fidget Infinity Cube v2, "OREO" edition.

Fidget Infinity Cube v2 "OREO" edition for MINI+. Prusament PLA Vanilla White & Prusament PLA Prusa Galaxy Black. After the print the middle joints may be a little stiff. Move slowly up and down and soon it would be OK.

Print approx. €2.81–€3.44 excl. taxPreliminary estimate for one variant

Downloads
514
Likes
63
Rating
5
P
PrintablesTs3dprints

Gridfinity Fatmax Tape Measure Holder

Summery This is a Gridfinity tray to hold a tape measure. it works with a stanley 25' fatmax, and standard stanley 25'. History Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories…

Print approx. €1.62–€1.99 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
511
Likes
46
Rating
5
P
Printables_KaszpiR_

Gridfinity soldering iron tip holder with locks, 16 holes

About I wanted to have more compact version for more tips with option that tips will not fall off if held sideways or upside down. I took original ‘Bin - 1x1x3 - pmcquay.stl’, added fill and holes with tiny locks inside the holes that…

Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
479
Likes
56
Rating
4.91
P
PrintablesGFS
18+

The source marked this model as adult content.

Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
478
Likes
65
Rating
5
P
PrintablesPatrik

Gridfinity bins for CR2032 batteries

Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…

Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant

Downloads
471
Likes
44
Rating
5
P
PrintablesAaronOaks

Gridfinity Dymo 160 Tape Holder

Holder for Dymo LabelManager 160 label tape, compatible with the popular Gridfinity organization system. More details on the Gridfinity system:

Print approx. €6.22–€7.60 excl. taxPreliminary estimate for one variant

Downloads
458
Likes
68
Rating
4.94
P
PrintablesIsaac

Infinity Cube fidget

It's fun to play with, especially when you're bored.

Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant

Downloads
435
Likes
19
Rating
4.33
P
PrintablesAntoine

Disney Infinity : Captain America

Another edit of a Disney infinity fanart model on SketchFab by JohnLogostini . This is my printable version of it, with a lot of detail in the model itself, instead of maps. Printed at 10cm high on my mk3s+ I added a photo of that print,…

Print approx. €5.15–€6.29 excl. taxPreliminary estimate for one variant

Downloads
422
Likes
59
Rating
5
P
PrintablesRae

Gridfinity AAA battery storage

This model uses the Gridfinity plugin to Fusion 360. The modeling is fairly basic after that, a negative extrude with an edge fillet. This then uses the rectangular pattern feature to build out the rest of the slots for the batteries.

Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant

Downloads
409
Likes
33
Rating
4.8
P
PrintablesKeldor

Gridfinity 2x4x6 Hex Bin

A single Hex bin with 2 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…

Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant

Downloads
365
Likes
61
Rating
5
P

Infinite Bed Scraper

One of the first items I printed with my Prusa Mini was a bed scraper, now after using it for some time the tip is worn-out and I should reprint the whole scraper instead of just changing the worn-out part. For this reason I decided to…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant

Downloads
332
Likes
53
Rating
4.6
P
PrintablesKevin Barker

100° Modified Hinges for Modern Gridfinity Case

Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…

Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
327
Likes
97
Rating
4.78
P
PrintablesPatrik

Gridfinity bins for CR2450 batteries

Gridfinity battery bins for CR2450-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 5 batteries. A 1x2x4 bin that fits 10 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…

Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant

Downloads
321
Likes
21
Rating
5
P
Printablesfifindr

Silicone / Caulk Finishing Tool

Use brim for handle. A compact finishing tool designed for smoothing freshly applied silicone, caulk, sealant, or similar materials. The tool consists of a threaded handle and 9 interchangeable heads that screw onto the end of the handle.…

Print approx. €1.99–€2.44 excl. taxPreliminary estimate for one variant

Downloads
319
Likes
66
Rating
4.5
P
Printablessyrovatskey

2x1 Gridfinity Rugged Box

You can use any of represented materials as you would like, free of charge. Вы можете использовать любые представленные материалы как вам хочется, бесплатно. I printed it with these settings / Я печатал модель со следующими настройками:…

Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant

Downloads
275
Likes
58
Rating
5
P
PrintablesChris D

Gridfinity Bin for Gallon Ziploc Bags

Gridfinity Bin for gallon size ziploc baggies (3x7x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 28 to hold lid on, but only takes 12 to hold firmly. Print lids face…

Print approx. €4.27–€5.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
272
Likes
21
Rating
0
P
PrintablesAntoine

Disney Infinity : Han Solo

I found these cute Disney infinity fanart models on SketchFab. But they aren't printable without some serious editing. So i did and here's the result for Han Solo. Printed at 10cm high on my mk3s+

Print approx. €3.32–€4.06 excl. taxPreliminary estimate for one variant

Downloads
271
Likes
40
Rating
0
P
Printablesedward8e

Gridfinity 2x2x3 4mm hex bit holder

Exciting Update to Our Hex Bit Holder Design! In response to the community's feedback and my desire to enhance functionality, I've rolled out significant updates to our beloved hex bit holder. Here's what's new: Increased Capacity:…

Print approx. €7.58–€9.26 excl. taxPreliminary estimate for one variant

Downloads
268
Likes
21
Rating
0
P
PrintablesAustin Vojta

Yet Another Fidget Infinity Cube: Screw Version

Buy a printed cube from me directly: AustinMakes.etsy.com This variant of my Yet Another Fidget Infinity Cube v2 model is the easiest yet to print. Assembles using M3 flat head screws. (If there's demand for it, I can upload a version for…

Print approx. €4.50–€5.51 excl. taxPreliminary estimate for one variant

Downloads
259
Likes
75
Rating
4.75
P
Printablesrh25170

Improved Gridfinity Dovetails

This is a redesign of the dovetail connectors from ‘Gridfinity Master Collection.’ Based on the file name, and the owner of the collection, I believe credit is due to GlitchPrinter for the original idea here. These are slightly smaller…

Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant

Downloads
258
Likes
29
Rating
5
P
PrintablesChris D

Dovetail Gridfinity Base - Multiple Dovetail Options

Dovetail Gridfinity Base - Multiple Dovetail Options

Print approx. €0.34–€0.41 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
255
Likes
38
Rating
5
P
PrintablesStuggi

Gridfinity Nippers Pliers Strippers Rack 2x2

A rack that fits a set of thin Knipex electronics pliers and 3 Knipex comfort grip small pliers. Prints without supports.

Print approx. €3.48–€4.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
244
Likes
33
Rating
5
P

Gridfinity Pen Holder (5x 12mm Holes) For Pilot G2

A 1x1 Gridfinity pen holder for 5x pens up to 12mm in diameter. Pen holder now fits Pilot G2 pens.

Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant

Downloads
238
Likes
31
Rating
5
P
PrintablesRae

Gridfinity superglue holder

Superglue tubes are annoying as they quickly go solid. They can last longer if stored upright with the cap on tight. Since the bases don't lend themselves to being easily stored upright I used the gridfinity plugin for Fusion 360 to make…

Print approx. €2.24–€2.74 excl. taxPreliminary estimate for one variant

Downloads
218
Likes
23
Rating
5
P
PrintablesKeldor

Gridfinity 4x4x6 HexBin

A single Hex bin with 4 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Requested by @CG485_1311834 Look at my other HexBin's here:…

Print approx. €6.35–€7.76 excl. taxPreliminary estimate for one variant

Downloads
218
Likes
53
Rating
0
P
Printablescryptomilk

CORE ONE Tools Gridfinity Bin

This is just a simple gridfinity bin for the CORE One Tools. There are two versions available.

Print approx. €2.65–€3.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
216
Likes
79
Rating
4.5
P
PrintablesPatrik

Gridfinity bins for 10 * ER14250 (0.5AA) batteries + bins for LR41 & LR44

Stackable Gridfinity bins, one 1x2x5 for storing 10 * LR14250 batteries, one 1x1x2 for storing 16 LR41 and one 1x1x2 for storing 10 LR44. The base box is generated with the Fusion 360 GridfinityGenerator,…

Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant

Downloads
214
Likes
13
Rating
5
P
PrintablesPatrik

Gridfinity CD / DVD bins

Gridifinity bind for CD or DVDs. The bins can be stacked. Included bins: Bin for 1 CD/DVD - size 3x3x1 (126x126x7 mm) Bin for 6 CDs/DVDs - size 3x3x2 (126x126x14 mm) Bin for 12 CDs/DVDs - size 3x3x3 (126x126x21 mm) Bin for 18 CDs/DVDs -…

Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant

Downloads
214
Likes
37
Rating
5
P
PrintablesDusBus

Gridfinity - 5x4 - Holder for 18 pens

Gridfinity 5x4 Pen Holder, a sleek and efficient solution for organizing and displaying your collection of 18 pens. Contains magnet holes and can be stacked.

Print approx. €13.63–€16.65 excl. taxPreliminary estimate for one variant

Downloads
210
Likes
30
Rating
0
P
PrintablesJoe

Gridfinity Refined Hammer Holding set (misc hammers), modular

These hammer pieces are for holding various hammers that i have. hopefully the sizes fit for you. they are modular. I use these flat bins to fill in the voids. Individual I have 4 hammers - - 2.5lb ESTWING sledge - 2-1/2" rubber mallet…

Print approx. €13.19–€16.13 excl. taxPreliminary estimate for one variant

Downloads
209
Likes
26
Rating
5
P
PrintablesMadestCat

Gridfinity iFixit Kit holder

A Gridfinity tool holder for an iFixit Kit.

Print approx. €3.66–€4.47 excl. taxPreliminary estimate for one variant

Downloads
207
Likes
46
Rating
5
P
PrintablesPatrik

Gridfinity D / R20 / LR20 battery bins

Gridfinity battery bins for D-/R20-batteries. The bins can be stacked by using the included spacers. A 1x2x4 bin that fits 2 batteries. A 2x2x4 bin that fits 4 batteries. A 1x2x6 spacer that is needed to stack the 2-battery bins. A 2x2x6…

Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant

Downloads
186
Likes
16
Rating
5
P
PrintablesPatrik

Gridfinity C / R14 / LR14 battery bin and spacer

Gridfinity battery bin for C-/R14-batteries. The bin can be stacked by using the included spacer. A 1x3x4 bin that fits 4 batteries. A 1x3x4 spacer that is needed to stack the battery bins. NOTE: The spacers are best printed upside down…

Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant

Downloads
183
Likes
11
Rating
5

Gridfinity Development System - Breadboard Holder

Thanks to @FruitieX for the great original model. Modifications from their model: Resized the opening to work with the Added pass-through holes to allow wires to go under the gridfinity baseplate. Removed some extra features that were…

Print approx. €3.69–€4.51 excl. taxPreliminary estimate for one variant

Downloads
181
Likes
42
Rating
4.75
P
PrintablesPatrik

Gridfinity bin for AA and/or C batteries

A compact stackable Gridfinity 2x2x9 with two partitions, each partition fits 20 AA batteries or 6 C batteries. It is not ideal for C batteries as the batteries can be hard get when the partition is full. The base box is generated with…

Print approx. €4.57–€5.59 excl. taxPreliminary estimate for one variant

Downloads
178
Likes
21
Rating
0
P
PrintablesAcho3D

Infinite surface/shelf

Acumulative prusament surface or wall mounted shelf. One or two joints each spool face in surfaces. One bracket and two joints each spool face in shelf. Use M4 screws to fix the shelf pieces to the wall. Flat washers reinforce wall mount…

Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant

Downloads
170
Likes
117
Rating
4.6
P
PrintablesChris D

Gridfinity Bin for Quart Ziploc Bags

Gridfinity Bin for quart size ziploc baggies (2x6x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 24 to hold lid on, but only takes 8 to hold firmly. Print lids face down…

Print approx. €2.65–€3.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
170
Likes
29
Rating
4
P
PrintablesKeldor

Gridfinity 2x3x6 Hex Bin

A single Hex bin with 2x3 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…

Print approx. €3.25–€3.97 excl. taxPreliminary estimate for one variant

Downloads
165
Likes
36
Rating
0
P
PrintablesGustyWaders

Gridfinity Baseplates for 62/72 in. Husky Work Table Drawers

Designed to fit the drawers for this Husky Work Table . I believe the 72in version of this work table has the same sized drawers so it should also fit. You'll need to print: 1x Corner Top Left (1) 1x Corner Top Right (2) 1x Corner Bottom…

Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant

Downloads
159
Likes
36
Rating
5

∞ Infinite length pole (split into segments) 2cm diameter

5, 10 and 20cm segments that can be strung together without limit. If you're into limits, there's a foot and topper too.

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant

Downloads
149
Likes
53
Rating
5
P

Gridfinity Moleskine Notebook Holder

Simple gridfinity holder for two notebooks. Requires 5x1 squares on the gridfinity base. Perfectly fits a large (5 x 8.25") Moleskine notebook. A Maker's Notebook will hang off the edge, as shown. Use only as directed--gridfinity storage…

Print approx. €7.65–€9.35 excl. taxPreliminary estimate for one variant

Downloads
146
Likes
33
Rating
5
P
Printables_KaszpiR_

Gridfinity base for ANENG AN8008 and AN8009 or similar

About Remix of Aneng Multimeter stand, added 2x2 gridfinity base with magnets and a box on the back to keep probes in it add magnets and it will be even more stable added version with more ‘flat’ angle for better reading the screen,…

Print approx. €3.54–€4.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
143
Likes
22
Rating
5
P
PrintablesMadestCat

IKEA Trofast Baseplates for Gridfinity - Smaller Size

Changes I changed the overall width and length by 2 mm (1 mm each side) which makes it fit a lot better. I also removed a few mistakes that were made by adding the area around the original baseplate. And to make it even easier to screw…

Print approx. €13.62–€16.64 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
142
Likes
20
Rating
0
P
Printablestoe4

Gridfinity Australian Coin Organiser

Based on @FilipKolinsky_352287 's parametric f360 gridfinity template. https://www.printables.com/model/286722-gridfinity-block-template-easy-to-use-for-fusion-3 It has magnet holes, but with the .f3d file you can remove them, or add…

Print approx. €10.40–€12.71 excl. taxPreliminary estimate for one variant

Downloads
140
Likes
12
Rating
5
P
Printableskevsparky

Gridfinity Baseplate Tape Cutting Stencil

This cutting stencil allows you to cut 5mm strips of double sided tape, that can be stuck to the underside of Gridfinity Baseplates, so they can be stuck rigidly inside a drawer.

Print approx. €1.16–€1.41 excl. taxPreliminary estimate for one variant

Downloads
139
Likes
69
Rating
4.67
P
PrintablesAbílio Costa

Gridfinity Alex drawer tray grid (economic variant)

Since the Alex drawers do not open fully, it is hard to reach the bins on the back of the drawers. This tray allows you to quickly remove bins on the front of the drawer, making it possible to slide the ones on the back to access them!…

Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant

Downloads
137
Likes
40
Rating
5
P
PrintablesKeldor

Gridfinity 1x2x4.5 Hex Bin

A single Hex bin with 2 x 4 Gridfinity and 4.5mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…

Print approx. €1.12–€1.36 excl. taxPreliminary estimate for one variant

Downloads
135
Likes
32
Rating
4
P
PrintablesKatasan

Gridfinity Brother P-Touch P300 Cube label printer holder

Uses the Gridfinity storage solution to hold the Brother P-touch cube label printer. Allows the printer to print while still in the box (using battery as the power port is covered). A nice height to fit into the bottom drawers of an Ikea…

Print approx. €6.99–€8.54 excl. taxPreliminary estimate for one variant

Downloads
132
Likes
18
Rating
5
P
PrintablesDusBus

Gridfinity - 5x2 - Holder for Bosch Gluey + spare glue sticks

Organize your crafting essentials with the Gridfinity 5x2 Holder, specially designed for Bosch Gluey and spare glue sticks. This holder provides a neat and accessible storage solution, ensuring your glue gun and extra supplies are always…

Print approx. €10.22–€12.49 excl. taxPreliminary estimate for one variant

Downloads
130
Likes
23
Rating
5
P
PrintablesTache

Gridfinity Ryobi Multi-Bit Case Holder

This holder organizes, but still keeps the original case. It was made to allowing opening without pulling the whole case out of the holder.

Print approx. €9.86–€12.05 excl. taxPreliminary estimate for one variant

Downloads
129
Likes
44
Rating
0
P
Printablesdrewiller

Gridfinity Craftsman 1/4" and 3/8" Ratchet Holder

Ratchet holder for both 1/4" and 3/8" craftsman ratchets and a spot for a 1/4" bit to ratchet adapter. Fits on the standard gridfinity system. 5x3 cubes.

Print approx. €5.37–€6.57 excl. taxPreliminary estimate for one variant

Downloads
125
Likes
21
Rating
0
P
Printablesplabs.cz

Gridfinity bin for MK4S nozzle replacement tool (silicone sock/no silicone sock)

I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.

Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant

Downloads
123
Likes
22
Rating
5
P
PrintablesINVESTEGATE

Infinite Loop Agility Ball Game

Hello Makers, i saw the video of the game at the beginning on Instagram and was immediately impressed. No further words are needed. Unfortunately I couldn't find a finished model to reprint, so I simply designed it from scratch myself.…

Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant

Downloads
123
Likes
38
Rating
0
P
PrintablesPatrik

Gridfinity Filament Sample Bins & Sample Card

Stackable Gridfinity bins and a template filament sample card. Sample Bins The Gridfinity sample bins are stackable for easy storage in drawers. 1x2x6 bin that fits 10 filament sample cards. 2x2x6 bin that fits 21 filament sample cards.…

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant

Downloads
118
Likes
25
Rating
5

gridfinity bin socket torx holder

Gridfinity bin socket torx key holder Supports torx keys size TX45, TX40, TX30, TX25 and TX20 The torx key including socket is 126mm (4 15/16") long and the socket ⌀ is ~17.5mm (11/16"). Used with 3/8" drive ratchet. The socket holder…

Print approx. €5.31–€6.49 excl. taxPreliminary estimate for one variant

Downloads
115
Likes
10
Rating
0
P
Printableswebbuster

Infinite Modular USB Organizer

It is a versatile USB organizer, expandable according to the number of USB sticks owned. If the number of modules exceeds 15cm, use the clamping module for the middle for good stability. If someone prints it with white PLA or some fancy…

Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
115
Likes
39
Rating
5
P
PrintablesVagrantMugen

Glue Stick Gridfinity Stand

I included a 1 and 3 stick stand. I was putting “Elmers Washable School Glue Sticks" in the stands. They are 22g and about 27mm in diameter. I made the holes 29.5 for fitting and ease of removal and insertion. I printed mine at .28 with 1…

Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant

Downloads
114
Likes
6
Rating
0
P
PrintablesStuggi

Gridfinity 1x1 Flux Syringe Holder

Prints very well in PETG with 10% gyroid infill and 3 outer layers.

Print approx. €1.86–€2.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
112
Likes
8
Rating
5
P
PrintablesTurbopstros

Gridfinity Bin for Parkside PFBSA 4 A1 Rotary Tool

Custom Cutout Gridfinity Bin for Parkside PFBSA 4 A1 Cordless Rotary Tool (from Lidl) Bin is 5 x 2 units - doesn't fit the Mini printer, so I prepared also the split version with dovetail joint to fit the Mini printer. ℹ 1 split part (for…

Print approx. €3.96–€4.84 excl. taxPreliminary estimate for one variant

Downloads
111
Likes
48
Rating
5
P
Printablesfluetke

Gridfinity cradle for Dymo LetraTag 200B Labelprinter

Gridfinity storage for a Dymo LetraTag 200B Bluetooth Label printer. Size: 3x3x2.

Print approx. €4.82–€5.89 excl. taxPreliminary estimate for one variant

Downloads
109
Likes
15
Rating
5
P
Printablescq

Infinitely Extendable Long Tube Nozzle - Dyson >=V7

A useful end to get into tight spaces, print as many extensions to make it as long as you want. Great for sideboard, side of fridges, tight spaces… There are 2 parts, the base and the extenders. The Extenders push on and twist to lock on.…

Print approx. €1.41–€1.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
108
Likes
19
Rating
0
P
Printablesfifindr

Infinite Knot Cube

Introducing the Infinite Knot Cube , a stunning representation of mathematical elegance and modern design! With its intricate interwoven structure and compact dimensions, this cube-shaped decoration measures approximately 111 mm on each…

Print approx. €5.33–€6.52 excl. taxPreliminary estimate for one variant

Downloads
107
Likes
30
Rating
0
P
PrintablesGunner A

Gridfinity Sonicare Toothbrush Charger

A gridfinity charger for your Sonicare Toothbrush.

Print approx. €3.42–€4.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
107
Likes
12
Rating
0
P
Printablesbrad3n

Adjustable Corner Drill Guide - Infinitely Customizable, Parametric, No-Supports Needed

The Adjustable Corner Drill Guide offers precise drilling for corners. It's parametric, customizable, and prints easily without supports. Features: Fits 1-8mm drill sizes Current files fit 2, 3.25, 5, and 6 10mm spaced holes for accuracy…

Print approx. €2.08–€2.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
107
Likes
50
Rating
0
P
PrintablesMakerT

Infinite Heart – Modular Geometric Jewelry

Concept & Inspiration The Diamond Valentine Collection explores the contrast between precision and emotion. Inspired by the brilliance of cut diamonds and the timeless symbolism of the heart, this collection transforms internal structure…

Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant

Downloads
103
Likes
38
Rating
5
P
PrintablesOkojo

Gridfinity Mk4 Nozzle Tools Holder

The Nextruder Nozzle Wrench and Nextruder Heater Block Clamp are the most important combination of tools IMHO if you intend to regularly swap nozzles on your Mk4. So, I made this 1x2x4 gridfinity bin to keep them close by your printer.…

Print approx. €1.55–€1.90 excl. taxPreliminary estimate for one variant

Downloads
102
Likes
24
Rating
5
P
PrintablesBen

GEN2 Decor - Gridfinity Drawers with half grid (25% more storage) - STANDARD

The Gen2 system (by Jerrari ) combined with Gridfinity is a flexible storage system. Why waste space when you can use it. So I added an extra column Gridfinity Half Grid (by HuMa ) to the empty space. The Gridfinity bins can have a height…

Print approx. €4.36–€5.32 excl. taxPreliminary estimate for one variant

Downloads
101
Likes
32
Rating
0
P
PrintablesRaphhorn

Gridfinity Apple Watch Band Organizer Single Edition

i made a 4x1x3 version of this great Apple Watch Band organizer i get rid of the holes for the magnets but if you want to add some you can delete the cubes in the .3mf file

Print approx. €2.29–€2.80 excl. taxPreliminary estimate for one variant

Downloads
99
Likes
8
Rating
5
P
PrintablesVagrantMugen

Deburring Tool Gridfinity Stand

There are a couple of these out there, but I wanted one that had all the tool heads and the handle in this orientation. Its got magnet holes on the bottom and a chamfer on the top holes to aid insertion . The bin was made using the Fusion…

Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant

Downloads
95
Likes
9
Rating
5
P
PrintablesChris D

Gridfinity - Gorilla Glue Holder

Gridfinity - Gorilla Glue Organizer 1x2x4 Gridfinity glue organizer. Holds super glue and normal gorilla glue bottles. Prints without supports. Color change at layer 28.2 for coloring in photo.

Print approx. €1.40–€1.71 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
94
Likes
11
Rating
5
P
Printables73pctGeek

Filament Infill Swatch for Gridfinity Bin

Swatch sized to a Gridfinity bin to keep track of various types of infill. Same size as my Filament Colour Swatches . Brother DK-11204 Multi Purpose Label template included in the files. Print Settings in the swatches shown: Vertical…

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant

Downloads
93
Likes
24
Rating
5
P
PrintablesPatrik

Gridfinity bins for needle files

Gridfinity needle file bin for storing 3 needle files. Designed for the 6 piece needle file set sold by Prusa, but you need to print two bin for storing all 6 files. The base box is generated with the Fusion 360 GridfinityGenerator,…

Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant

Downloads
90
Likes
14
Rating
5
P
PrintablesTom Hofman

Gridfinity Desk Organizer System - Deskfinity - 1x3x6 Wallet Cards

A simple cut and merge of the original 2x2x6 Wallet Cards holder to fit a 1x3x6 space.

Print approx. €2.72–€3.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
84
Likes
10
Rating
5
P
PrintablesROK

Hashi-Oki-Mugen / infinite chopstick bank (Spiral vase print)

My take on a chopstick bank (hashi-oki) - I really love spiral vase mode ;) Prints damn quick and is quite rigid. Printing instructions This is not meant to be printed as a solid object! use regular draft print profile (0.3 layers) enable…

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant

Downloads
83
Likes
25
Rating
5
P
PrintablesDusBus

Gridfinity - 1x8 - 4x ruler holder

A handy solution for your rulers. It's not fancy, just practical. Holds up to four rulers, max size 37.5cm*2.5mm. Be aware that it won't fit on your regular sized (MK3/MK4) print beds. I have included a pre-cut version with dowels. Needs…

Print approx. €8.88–€10.85 excl. taxPreliminary estimate for one variant

Downloads
78
Likes
9
Rating
4
P
PrintablesoXiVanisher

Harder and Steenbeck Infinity 2024 magnetized storage

A storage for the Harder and Steenbeck Infinity 2024 airbrush. You need 8x 6 x 2 mm magnets which will be included in the print. You will have to add printing pauses to add them! This is part of my magnetically stacking “Airbrush Storage”…

Print approx. €5.70–€6.97 excl. taxPreliminary estimate for one variant

Downloads
76
Likes
16
Rating
0