1,359 models
Intro This is a mini bit holder with perfect grip! Try it! You will love it! Now in Version V2: A better variable bit fitting that makes sure every bit will fit. Why you'll love it? Variable bit fitting Suitable for all HEX bits Print is…
Quick mount that fits various PTFE fittings I found in junk drawers. Use short PTFE cutoffs, or full reverse-bowden with a longer tube. Prevents filament from scraping against the box during printing. Go full reverse-bowden (PTFE tube all…
Intro A tiny but incredibly handy bit driver designed to go everywhere with you. This latest V2 update improves grip and usability while keeping the tool ultra-compact . Whether you’re fixing small gadgets, tightening electronics, or just…
This is a very simple emergency low-pressure water ball valve that can be printed quickly in place (print-in-place) and with no assembly. ver. 1 with 0,3 mm tolerances (in optimization, with comments…) Should be printed using mechanically…
Updated ─ [ March 15, 2023 ] Plates to close the holes have been added when changing the position of the fitting socket. [ January 26, 2023 ] A PTFE tube cap has been added. ─ *Printing with flexible materials such as TPU is recommended.…
I wanted to use the Prusa Dryboxes with a PTFE-Tubing clamp instead of the plastic-flap gap that the dryboxes currently use. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox…
This enables you to use the Prusa Dryboxes (not Wall-Mounted version) with a PTFE-Tubing clamp. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox using the same screws (M3…
This is a modified filament cover for the MK3s+ that allows a "reverse bowden" / filament guide setup by installing a PTFE fitting measuring M6x4. Please check that the threaded fitting does not protrude on the other side. That is why I…
This is my modelling of a standard snap-fit garden hose connector, combined with a 1-inch BSP screw fitting - as often used to connect to garden water pumps. (Note: the hex bolt for tightening was sized to match the outer diameter of the…
Filament Pass-through for IKEA Lack Enclosure, using a PC4-M10 fitting. BOM ・1x PC4-M10 fitting Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 15% Thanks to Iwao.
This is a way to allow printing using a filament while it is still in a drybox. Just drill a 1/2in (~13mm) hole in the drybox and put this in it. There is a version for both the M6 and M10 PTFE push fitings.
Fits M10x0.75 fittings. Hardware required is 4xM3 socket head bolts and matching hex nuts. Added a STL for a TPU/TPE seal if the surface isn't even but I haven't used it.
Silencer 1/2 UNF fitting. For .177 and .22 air pistol/rifle. 100% effective and tested for durabillity. Assemble in the following order: UNF fitting, long bell and collar, short bell and collar X5, end cap. You only need to glue the UNF…
Simple passthrough the drybox. You will need to drill a 10mm hole in the wall of the box. Screw the PC4 couplings onto the outer part. I probably don't need to explain anymore :) Material: PETG or PLA (but PETG is better) Layer: 0.2mm…
Needed ECAS fittings for my Voron2.4/Stealthburner/ERCF projects, and there was no heckin' way I was going to use the original blue inserts. Couldn't find any files in the immediate Google search results, so I whipped up a few concentric…
PETG or harder recommended. No supports needed if you print thread side up, but I used a brim for stability. This thread works with many (most?) household vacuum hoses. I harvested an old Eureka hose (the black one pictured), an ancient…
This is a right angle fitting that attaches to the top of a Dust Deputy cyclone separator. This fitting makes it less likely to kink your vacuum hose. For standard 2 ½ inch vacuum hose. I printed it in one piece in PETG with supports. You…
This is a bulkhead fitting for connecting flexible hoses to containers. It is designed to allow for easy drainage, since the existing parts I found available didn't allow for good drainage due to surface tension around the inlet. You…
Deck fitting for bungees or deck lines. Use a 4 or 5mm oval head bolt. This one has only one hole for the line. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes Resolution: .2mm Infill: 10 perimeters to ensure…
This fitting replaces the exit fittings that come with the repbox to add PC4-M10 pneumatic couplings to connect PTFE tubes directly to the repbox. This is a remix that compared to the original: extends the passthrough at the top to fix a…
Adapter na 3/4" hadici, šroubovací průchodka M36 Vrtám díru 40mm, tloušťka stěny nádrže je cca 3mm. Doplnit ploché těsnění s vnější strany , závit netěsní na 100%. Z vnitřní strany není nutné těsnit. Hadici před nasazením nahřát, aby…
Note BSPT thread, used commonly in Europe. I'd recommend printing with the thread up, to avoid printing horizontally in thin air. Printing like this, use a small brim to increase print stability, no support needed.
Adapted so it would connect to the drain fitting on a Coleman (year 2020) pool so it could be connected to the backwash line. How used: Disconnect Intex discharge (backwash) line Connect adapter to pool Connect discharge (backwash) line…
A curtain rod holder that accepts rods around 16 mm in diameter. Fits Kirsch wall fittings that are commonly installed in Sweden. Just like the original metal hooks, no tools are required for installation (assuming that the fittings are…
pH or ORP probe pipe-drilling / holder. It is designed to keep probe safely in the water. Should be mounted behind filtration system but before heater and any chemistry injection system also. Easy to use, just drill hole into the pipe…
2"/D50 pipe fitting for probe/sensor/injector holding onto pipe. It has been made with two typical pipe-threads - G1/2 and G3/4. You can look into my other models, where you can find temperature probe sensor shaft for this fitting or…
Will likely work with more DeWalt miter saws than the DWS779 I have, but YMMV. PETG or harder recommended. No supports needed if you print thread side up, but I used a brim for stability. This thread works with many (most?) household…
The existing gcode is quite fast at 31mins with a 0.4 nozzle and 0.10Detial defaults. The detail is necessary for the threads. I would stick with this gcode it worked well and the threads are already pretty snug.
Threaded Cable Grommet for the E27 fitting Appropriate for round or flat flexible cables, configured by default for European E27 fittings with a M10x1 thread. The default stl exports will fit a generic flat 2x0.75 mm2 cable. You can…
Modified the Bear Upgrade 2.1 optional reverse bowden to fit the original M5 fitting (PC4-M5) used by Prusa for the MMU2 cover. The vslot mount is available in two versions: angled or normal. I bought the fittings here:…
Quarter Inch Quick Connect Fitting Retaining Clip
Modified the Bear Upgrade 2.1 Extruder (BearExxa) Cover (fs-cover) to fit the original M5 fitting used by Prusa for the MMU2 cover. I bought the fittings here: http://lecktor.com/en/nuts/159-tappex-microbarb-m5-pack-of-10.html Print…
I liked tg73's design, but needed a solid termination for a Bowden tube. In doing so, I had to add bolts and a bottom plate to secure the slot cover. Required Hardware: 4x M3x12 Socket Hex Head Cap Screw 4x M3 nuts (imbedded) 1x PC4-M10…
UPDATE: my desing is no longer up to date and therefore not needed. i still leave it online for comments Use the original files there . Yesterday the original printed and then determined that a few minor things should still be changed.…
This allows you to attach two honey bottles so the contents of one can flow into the other without making a mess. It has arrows around the outside to indicate which direction should be placed downwards. The inside is designed to keep the…
HI, I have created a remodeled leg for the future Prusa Core One printer to increase its mobility. The feet is designed to be attached to the printer and fitted with a brake wheel from Kaufland at the bottom. Once I receive the printer,…
Soaker hose often break which makes them impossible to use unless you crimp another fitting onto. This fitting has small features on the ID that allows to slide in the damaged soaker hose and retain it. The retention is good enough for…
This is an adapter to convert a barb hose fitting (such as my rain barrel overflow) to a male garden hose outlet. By measurement, the fitting is about 29mm ID with a 2 degree taper. The adpter is just inserted with a bit of force and…
This is a storm fitting for the cover plate of the storm protection at the bottom of Velux windows, compatible with the Velux original (cf. e.g. here or here ). Print the fitting in STL orientation with 0.2-0.3mm layer height, 4 outer…
Better T37 RC sailboat mast and boom fittings and a mast head crane. Fittings are sized for a carbon fiber mast diameter 6.07mm or a carbon fiber boom diameter of 5.75mm. Fitting include a mast step for the interior lower fastening of the…
Mijia Thermal Bottle 350ml fitting mod
This Fitting Insert is inserted into the threaded end of the “Y” Adapter PC4-M10 PTFE Connector to reduce the chances of the filament getting stuck as the filament exits the “Y” Adapter and goes to the printer. I printed @EdJohnson's…
My AMS roller supports cracked. There's a hot fix here from BambuLabs which works great but it means the existing little boxes I printed don't fit anymore. So I made it back from scratch with groove to fit. I also added a little grabber…
Tube Y fittings for connecting different sized soft tubing together. Has Barbs to give a secure fit on the hose. Designed to need minimal support. Print standing up with larger end on the bed. Brim might be helpful for the smaller sizes.…
selection of fittings for garden hose and drip watering hose... 1/2 inch (13-16mm)
I printed the spool winder by V3 Precision as had a couple spools that were not working well in the AMS. Although it worked and uses no fittings other than the screws to hold it down, it didn't respool as I expected. I had to touch the…
DeWalt AirLock compatible twist-lock dust collector fitting I like DeWalt tools well enough and own a bunch, but like every other tool vendor their approach to dust collector connections is psychotic. I'm not at all convinced that any two…
Barbed tube fittings for connecting different sized soft tubing together. Has Barbs to give a secure fit on the hose. Designed to need minimal support. Print standing up with larger end on the bed. Brim might be helpful for the smaller…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here is a 3-Way Elbow designed to…
A direct adapter between : an Air Hose Fitting used on an Air compressor a Gardena Hose Fitting Purpose: To winterize your irrigation system by forcing the air from an air compressor into the pipes in order to remove water and avoid…
PTFE tube fitting (Collet) for the MMU3 Cassette assembly, i went into upgrading my MMU2s to MMU3, upgraded from official printed parts, had almost everything in my inventory except for the collets, searched online stores but could not…
E26/E27 bulb sockets cost $3 to buy, this costs 0.30 cents to print! That's 90% savings to help justify your 3D printer purchase. I found Salvatore's 3D model fit the threads of light bulbs very well, however I wanted a more traditional…
Pipe fittings Elbow Ø16mm / Ø20mm / Ø25mm Hexagonal Shape - Gomiti di raccordo tubi forma esagonale Piping and Fittings for Installations for PVC Electrical Conduit 90 degree Ø16/20/25mm 120 degree Ø16/20/25mm 135 degree Ø16/20/25mm 150…
Added a hole to hang it from a pegboard and negative text for identification.
Y fitting for 4 inch dust collection system Print instructions Category: Parts Summary Y fitting for 4 inch dust collection system Print Settings Supports: No
Useful for feeding filament from dry-box or dryer. Remixed from the original mk3 design. Increased height between printer frame and forward angle to eliminate collision with the MK4 extruder carriage, and revised the “clamp” to be tighter…
Print it barb side up. The barb is 13 mm at the narrowest and 15.6 mm at the thickest, works perfectly for ½" PVC tubing, though getting it off can be tough.
You definitely need to print these in ABS or another plastic that holds up well outside. The valve needs 3 rings to function properly without it, and will leak.
Kitbashed ¼ NTP male to male ½ hose barb.
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are 4-Way and 5-Way Tees…
UPDATED 11th March 2020: Added straight-through Y pattern, optional flow arrows. Having a european-built caravan in Australia, I found it very difficult to get the 28mm diameter sink and drain pipe plumbing these are fitted with. I tried…
Measured a Pi 3B+ to design a case around. Included Fusion 3d export as well for anyone that wants to tweak. https://youtu.be/sjtyZTx15O0
Please note: this is designed to be a press-fit INSIDE a blast gate (or dust hood) with a 4-inch OD, as shown below: … which is exactly how the POWERTEC 70291 (after which this was styled) fits inside a blast gate (or dust hood) with a…
Always liked those quick release bowden fittings, but unfortunately the regular sizes (M6/M10) don't fit on Prusa MINI. So I decided to make an adapter. UPDATE 24.07.2020: Stretched the hex-nut a bit, so that the transition between thread…
.STEP model of the pneumatic fitting commonly on Creality hotends with bowden tubes. For use in CAD, not for printing. https://thangs.com/mythangs/file/605391
modified the original files to fit tighter to the PS5, and increased the strength of the hooks. Also added a larger hook to the back side of the right side. Added a 3mf file where they both fit on the print bed together on the MK4 or MK3…
Print at lowest layer height you can.
BSPP G1/4 barbed hose fitting for hoses between 5 and 7mm of Internal diameter. It has a small recess to fit an O-ring with 17mm of external diameter and a maximum of 2 mm thick. The barbs larger and smaller diameters are, respectively…
DOWNLOAD CAMLOCK and find more accessories HERE. This fitting suits a 40mm inside diameter, which will fit generic compound mitre saws and inside many standard vacuum cuffs. It fits perfectly on my Makita saw, to allow easy CAMLOCK…
These fittings will allow you to make a Reef Hub for the 2025 FRC game Reefscape out of PVC pipes. Each fitting is split in half to allow easy printing and alignment of the layers for maximum strength. Glue everything together with hot…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here is a 4-Way Elbow designed to…
Here are some caps and plugs for AN lines I made to protect open lines from contamination. NOT FOR PRESSURE USE, probably not even liquid-tight. The wrench flats are not for wrenches. The threads have been modified to print nicer, and…
A simple test for parts fitting. If the printer is properly set, the two parts should snugly fit each other, like two Lego blocks. You should repeat prints while adjusting Extrusion Multiplier or Filament Flow Live Tuning (depending on…
Parametric library for generating any kind of planar pipe fittings. I'm using them for my plant-watering system, I guess it can also be used for aquariums, water-cooling etc. Designed with OpenScad, source code there:…
I made this modification to be able to easily remove the PTFE tube for filament change and cleaning (cold pull). Important note: PTFE tube should be snug fitted in the hole, yet easy to remove. Models have a 4,3 mm diamater hole which is…
This a drop-in replacement part for the K1 extruder cover. It's compatible with all versions of the extruder (V1, V2, V3). I have made this cover because I wanted to be able to upgrade the extruder V1 and V2 with the most interesting…
I recently added a Micro Swiss NG to my Ender 3 V2. I am going a reverse bowden route, with the eventual goal of printing some more hydroscopic filaments. So i purchased a Sunlu S2 filament dryer and used my long Capricorn tube to feed…
Downward angled exit from a filament container that sits on top of the 3D printer enclosure
Lock clip for PC4 fittings and ptfe tube connectors
This is one of my models origionally on thingivese, checked and it still works with the newer OpenSCAD releases. hope it finds a new audience here. This is an OpenSCAD library to generate round ducting / pipe, and assosated fittings. The…
Made to fit a 40mm vacuum hose to an unmodified Hose Fitting from @PeterH's “Camlock Connectors with Magnetic Catch”. At the fitting side it screws in easily, at the hose side it is a bit more snug. If it is too snug, use the Offset Face…
Because I liked the battery crates from https://www.printables.com/de/model/173788-customizable-stackable-beer-crate-for-all-types-of a lot but wished for a couple of modifications, I started redesigning them. My redesigne includes:…
I modeled these using measurements from ABS 1-1/2" plumbing fittings. My goal is to make all of the standard ABS/PVC plumbing fittings, at least in the 1.5" range. These can then be printed very small to test build plumbing installations.…
A Set of Orphaned OpenSCAD Scripts I wrote that generate pipe fittings of various sorts, was intended as an extension to my other pipe generation scripts . By orphaned I mean I wrote these in 2014 and don't feel I ever finished them. I've…
I printed with 0,4mm nozzle an 0,12mm layer height. Threads turn out nice. If want to do it even better adapt the layer height at the threaded area to 0,08mm. But as told it works nice with 0,12 as well. Hole for screw is 3D print…
4-way PVC fitting for 3/4" (ID) pipe. With and without built-in support. Print Settings Filament: Polymaker ASA Notes: Printed in ASA for outdoor use. Category: DIY
Thanks to Vince94520 for the bayonet fitting part of the design. His original is here https://www.thingiverse.com/thing:2897934 This locks onto my Festool Domino very well. I needed a 35mm inner diameter fitting to fit my Siemens vacuum.…
This is the bulkhead fitting needed to install a valve in the wall of a rain barrel. While commercial fittings are available, they can be expensive. The ID of the fitting is sized for a ½" pipe thread valve (very common in the US). The OD…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are 5-way and 6-way crosses…
Modified spool2kool 's design so it complies with the standard PC4-M10 thread and nut measures therefore it fits in all those passthrough solutions ( SpectreGadget 's one shown in the photos). Print recommendations: Printed the clamp in…
My dudes and dudettes! So many remixes, not one make? What the frick? Post me some sweet pics. And whatever you do, don't look away from the nozzle . Friend asked me to make a hose fitting between his vacuum and his jigsaw. I built one 1…
Pneumatic fittings collet clips kit card, I keep losing them this solves the problem…
I only made it for the models i have home if you have different sizes i will edit the model and add your size. Current size: D38 mm (20mm pipe) D43 mm (20 mm pipe)
Thank you Marko Borsic for the original design and Boris Cvjetkovic for the remix with the clip. It worked great for me but sometimes the 6mm Bowden tube could pull out with little pressure when slightly moving my polymaker filament box.…
Hose Fitting Print instructions Category: 3D Printing
Redesigned the stand, and added a circular box to hold electric connections and GU10 light bulb fitting.
Finally made a PC4-M10 adapter for push-through bowden fittings. I use it on the extruder drive, so I don't need that extra small piece of bowden tube.
END FITTINGS This set of models includes 5 part files for various scenarios of venting your Creality K1/K1C exhaust outside. It's especially good for when printing fumey filaments like ASA or ABS where that half-filled OEM carbon “filter”…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are reconfigurable 22.5 & 45…
To make multicolored vases, you don't need to weld filament. Just put pieces of different colors into your PTFE tube. As there is a chance of them becoming stuck (ask me how long it takes to get ~40 pieces of filament unstuck in a 150mm…
![Extended PTFE (PC4-M10) Quick-Fitting Mod for Prusa Drybox [V3]](https://media.printables.com/media/prints/31696/images/745620_40034652-a998-4c43-983c-424bf857ea6d/img_4234.jpg)
