Search results: i4

Sort order

463 models

P
PrintablesCarter

SnapCase For Raspberry Pi4B

Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place Screwless Jack…

Downloads
3,444
Likes
713
Rating
4.96
P
PrintablesMecky1963

Board for development with Arduino Uno, RPi4B, ESP8266 Nodemcu, Wemos D1 Mini

I constructed this board to hold the above mentioned controller for development purposes. The part was printed with PLA with a layer of 0.3 mm. Any other filament works too. No rocket science. Step file included. F360-file on request. The…

Downloads
514
Likes
96
Rating
5
P
PrintablesAlastorsNight

Raspberry Pi4 case for Prusa MK3 - Remix

A case made for mounting your Raspberry Pi4 to your Prusa i3 MK3. Smallest form factor possible for a Pi4. All peripheral ports accessible (not the Pi headers). Break away window for Pi-cam. Windows for status lights. Easy to print: no…

Downloads
507
Likes
103
Rating
4.89
P
PrintablesFalco

Raspberry Pi4

Prusament Galaxy Black. PETG 0.20. 15% Infill: (Gyroid). Nozzle 250c. Bed 90c. Support : None.

Downloads
288
Likes
41
Rating
4.83
P
PrintablesCarter

RPi4 Ice Tower Cooler Case

Cover modified to Fit HexCase Cover added clearance to IceTower by .5mm per side Base modified to match HexCase Snaps (interchangable) Collabortive Project with WeakNerve ( https://www.prusaprinters.org/social/9859-weaknerve/ ) Concept…

Downloads
225
Likes
23
Rating
5
P
PrintablesHawkeye

Raspberry Pi4 enclosure in the classical Apple Macintosh SE style

This is a Raspberry Pi4 enclosure in the classical Apple Macintosh SE style. In addition to Pi4, the following components are selected & installed: Waveshare 4inch square LCD ( https://www.waveshare.com/4inch-dpi-lcd-c.htm ). Geekworm…

Downloads
144
Likes
55
Rating
0
P
PrintablesBig-B

Rackmount 9,5Zoll Focusrite 4i4 (3rd Gen)

Hallo Freunde der Audiotechnik, anbei gibt es STLs und G-Codes für einen Focusrite 4i4 (3rd Gen) 9,5Zoll Rack Halter. Ihr braucht für ein komplettes Set folgende Teile: 2mal Rackmount 2mal Stabilisierer Top 2mal Stabilisierer Down…

Downloads
141
Likes
10
Rating
0
P
Printablestudormts

Einsy Rambo & Raspberry Pi4 + onboard Fan case for stock Frame

This print is based on https://www.prusaprinters.org/prints/30296-einsy-rambo-raspberry-pi-case-for-stock-frame I modified the case so it can fit a Raspberry Pi4 with onboard fan. My fan modell is ZP-0042 New design Design from…

Downloads
126
Likes
37
Rating
5
P
Printablesclovisd

GeeekPi RPi UPS Case for RPi4 (EP-0136 Rev5)

This is an modification of the original RPi4 UPS case by Jason with changes and upgrades for the newer revision of the GeeekPi RPi UPS hat (aka EP-0136) for Raspberry Pi 4 . UPS Link: https://wiki.52pi.com/index.php?title=EP-0136…

Downloads
101
Likes
7
Rating
5
P
Printablesincomn

Cathodic TV-style BTT PITFT50 V2.1 + RPI4 case with fan

Cathodic TV-style case for BTT PITFT50 V2.1 screen + RPI4 + fan This was designed so i don't buy anything else than what i had on hand, you will find a recap of what's needed down below. The main concern when designing this was airflow :…

Downloads
81
Likes
12
Rating
0
P
PrintablesGhostbird

HifiBerry DAC+ Pi4 remix

As this is a remix, please refer to the original for most instructions. Here I only detail my changes. I suggest you do not print my files, but instead download the SCAD file and use OpenSCAD to export your own print files. See Caveat…

Downloads
62
Likes
4
Rating
0
P
PrintablesJens Willmer

Pi4 Case Stand

Case stand for Pi4 with SSD. Optimal air flow and compact design. All ports point to the back. Additional Components: Alu Case: https://buyzero.de/products/aluminiumgehause-fur-raspberry-pi-4-b-mit-kuhlkorpern-p4-08-joy-it-1 KingSpec…

Downloads
58
Likes
6
Rating
0
P
Printablesfiliphromek

AAA batery adapter for NITECORE Intellicharger i4

An adapter for NITECORE Intellicharger i4 to fits AAA batteries comfortably and stable during charging. Made in Autodesk Fusion 360.

Downloads
32
Likes
3
Rating
5
P
Printablesaxelrafn

Raspberry Pi4 Cradle

I have a Raspberry Pi 4 with the 4" Pimoroni Hyperpixel touchscreen on my desk in an enclosure I found here, but I wanted it to be at an angle so I could see it better on my desk. Quickly threw this together and tried to minimize the…

Downloads
22
Likes
4
Rating
0
P
PrintablesGarboTec

Lack Enclousure to RPi4 Hyperpixel 4 Display Mount - on a Prusa MK3S+

My model serves as a connector between the models 'Hyperpixel 4' LCD Cover Display' and the 'Cable Entry Ikea Lack".

Downloads
18
Likes
3
Rating
0
P
Printablesmacsddau

RackRPi pi4 w/ POE+ module

To be use with https://www.printables.com/fr/model/668314-rackrpi-frame-2u and https://www.printables.com/fr/model/4074-malolos-screw-less-snap-fit-raspberry-pi-4-model-b/comments/1264962

Downloads
14
Likes
0
Rating
0
P
PrintablesTom Li

Tami4 Edge custon insert

This is a custom insert for the tami4 edge water dispenser. You can even use the step file for the blank and create your own pattern! I printed this with pla, 0.20mm layer height.

Downloads
12
Likes
1
Rating
0
P
Printablesk0walski

Rpi4 arm mount (back)

Rpi4 arm mount attached to the left motor (X-axis) of MK4S.

Downloads
8
Likes
0
Rating
0
P
PrintablesCarter

Pi4 Case + FanCover w/Camera Slot

Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place…

Downloads
14,833
Likes
3,575
Rating
4.86
P
PrintablesCarter

Pi4B Flat Fan Case Noctua 40x10 5V/3.3V SnapTogether

Flat version of the Domed Cover...SnapAssy. Please NOTE! Remove the MicroSD Card before assembly and disassembly! You will need... Noctua 40x40x10 MM Fan 5V 2 Dupont female single pins to connect to 5V or 3.3V and Ground GPIO pins. You…

Downloads
1,585
Likes
134
Rating
4.92
P
Printablesrockethorse

Hyperpixel 4" Touchscreen + LCD + Raspberry Pi4 for Octoprint and OctoDash Prusa for MK3s+

LCD panel that works with the awesome Hyperpixel 4" touchscreen with Raspberry Pi4. This is for: MK3/MK3S/MK3S+ and Pi4 Yet another remix of the 4” HyperPixel cover for the Prusa MK3S+ for the Pi4 to be used with Octoprint and Octodash.…

Downloads
1,054
Likes
373
Rating
5
P
Printableskarelv

Prusa i3 MK3s Raspberry Pi4B case profile mount for octopi

My first remix design for a 3D print! I added the hooks to the case such that it can be screwless mounted to the horizontal profiles at the bottom of the prusa MK3s printer. RPi4B case:…

Downloads
1,050
Likes
174
Rating
4.84
P
PrintablesWDR

Raspberry Pi4 case for Prusa MK3

Put a Raspberry Pi4B on your Prusa Mk3S and have it align perfectly with the frame. Smallest form factor possible for a Pi4. Space for an optional Pimoroni Fan Shim. All peripheral ports accessible (not the Pi headers). Break away window…

Downloads
929
Likes
149
Rating
4.84
P
PrintablesOzRocky

Pi4 SSD Case

This case is designed to hold a Pi-4 and a standard 2.5” SATA SSD. Sometimes it’s useful to be able to boot your Pi from a SSD rather than an SD card. I’ve previously created a headless version that allows for the PoE+ Hat. The Pi and SSD…

Downloads
810
Likes
147
Rating
4.91
P
PrintablesMDFPereira

BTT PI4B Adapter case

This is a remix of the original PI4B Adapter case from Bigtreetech. Changes: Chamfer near the DSI port exit to avoid supports. Holes where to screw the CB1 and heatsink, both with M2.5 nuts or screw on plastic. Bigtreetech logo/name…

Downloads
787
Likes
55
Rating
4.5
P
Printablesrin_ofumi

RaspberryPi4B Case

Happy 10th anniversary to the Raspberry Pi! Description This is the Case for the Raspberry Pi 4 B. There are 2 types of top covers. Slot-in I/O cover type. Cut-out I/O cover type. There are 3 types of bases parts. with tabs (for wall…

Downloads
775
Likes
5
Rating
5
P
PrintablesJerlo

Jerlo Einsy Box Bear (Rpi3B+ / Rpi4)

I designed this box to integrate the Einsy rambo and be able to deport the Raspberry 3B+or 4B and improve the cooling of the whole The box has many advantages: Compatible with my bear feet…

Downloads
767
Likes
91
Rating
5
P
PrintablesKB9RLW

A desk stand for the ATS-mini Si4732 pocket receiver.

This is a nice little desk stand for the receiver. It includes a baffle to reflect the sound from the rear speak forward and a resonating chamber that slightly amplifies it. The TPU foot is optional and should be printed in TPU 95a. It…

Downloads
669
Likes
47
Rating
4.83
P
Printablesdarken

Raspberry Pi4B Prusa Mini Case

A Raspberry Pi4B case that attaches to the rails so you can mount it behind the LCD.

Downloads
632
Likes
107
Rating
4.89
P
PrintablesSilfer

Raspberry Pi (RPI4) Wall Mount

With this bottom of the case you have the possibility to screw your Raspberry Pi 4 to a wall with M3 countersunk screws. I‘ve included the Pimoroni Fanshim top for RPI4 as that is what I‘m using on my enclosure. The case bottom is…

Downloads
568
Likes
34
Rating
5
P
PrintablesRouletabille

Box for 7 inch Touch screen +3 switchs + Raspberry PI4, to run Octoprint

My target was to create a box covering all wires arround a 7 inch touch screen, a raspberry PI4, and 3 switchs. Only one cable is reaching the box with an USB connection to the printer, a power input for the PI, and some switchs lines. A…

Downloads
533
Likes
84
Rating
4.5
P
PrintablesKVEL

Raspberry Pi4 B Case

Just my design of a raspberry pi4 case. Super Simple. With the possibility to screw the housing to a surface. Pay attention ! The bolts you need are M2.5 x 16. Link:…

Downloads
531
Likes
33
Rating
4.8
P
PrintablesDJERO

Focusrite Scarlett 2i4 & 2i2 2nd Gen bracket

Support à fixer sous un bureau ou un plan de travail pour la carte son Focusrite Scarlett 2i4 2nd Gen et 2i2 2nd Gen Je voulais un support qui me permette de sortir la carte de son logement en cas de besoin. Attention, les languettes sont…

Downloads
519
Likes
40
Rating
0
P
Printableskindo

I4 vacume engine

requires smoothing the cylinder walls and everything else that does not fit together

Downloads
503
Likes
37
Rating
5
P
Printablesloserish

BTT PITFT50 V2 Pi4B Enclosure

This is a simple enclosure for the BigTreeTech PiTFT50 V2.0 screen assembly with a Raspberry Pi 4B mounted inside. The BTT mounts into the case with holes for the screw bosses and is secured from the back side with small metric screws…

Downloads
491
Likes
62
Rating
4.75
P
Printablesdubs49

ender 3S1 raspberry octoprint rpi3 rpi4 (screwM3)

intégration octoprint pour raspberry dans le tiroir de la ender 3S1

Downloads
485
Likes
43
Rating
5
P
PrintablesG2logic

engine i4 turbocharged

a cool i think working engine have not tested it out it is a beta/ prototype

Downloads
484
Likes
40
Rating
0
P
PrintablesAdjuro

Raspberry Pi4 case for Prusa MK3S+ with DSI opening

This is a remix from the project https://www.prusaprinters.org/prints/39449. The goal was to mount an Raspberry Pi 4 directly on the frame of the Prusa i3 MK3S+ a look alike. As per previous made version the case is small and as compact…

Downloads
453
Likes
84
Rating
5
P
Printables7824c5a4

Focusrite Scarlett 4i4 Under-Desk Mount

A simple bracket to hold a 4i4 Audio Interface to the bottom of a desk. Has recessed 3mm holes for a variety of screws.

Downloads
452
Likes
39
Rating
5
P
PrintablesChris D

LCD Cover for Raspberry PI4 w/ Hyperpixel Display

This is a remix of the LCD Covers for Raspberry PI4 w/ Hyperpixel display. After reading some reviews about the existing ones being too tight and possibly cracking the display, I designed this one so that RPI w/ Hyperpixel simply slips in…

Downloads
446
Likes
65
Rating
4.83
P
Printableswookiearocket

Case for Freenove FNK0078 7" Touchscreen w/Pi4 Model B

This case is designed around the following: Freenove FKN0078 7" Touchscreen Raspberry Pi 4 Model B Geekworm P165-B 11mm heatsink for the Raspberry Pi 4 Model B Assembly requires the following hardware 4x M2.5 x 15mm screws 4x M2.5 x 10mm…

Downloads
434
Likes
22
Rating
5
P
Printables17david

carcasa raspberry pi 4 / case raspberry pi4

Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset.…

Downloads
427
Likes
30
Rating
4.75
P
PrintablesFreeviv

Prusa MINI Raspberry Pi Case for the Pi4 B

Remix of Joe's Pi Case design to fit a Raspberry Pi 4B. You can customize the design with the included files (.step and .f3d) Print instructions Best to print the parts separat. If you download the stl you need to flip Top.stl. If you are…

Downloads
395
Likes
36
Rating
5
P
PrintablesP.Tech

Rapsberry Pi4B Case with 40mm Fan and Fusion 360 file

This is a redesigned case based on Malolo's RPi4 Case. This was designed to fit the Raspberry PI 4 Model B with a Noctura 5V 40mm fan.

Downloads
394
Likes
19
Rating
5
P
PrintablesALE TNT

Filter cleaner iRobot Roomba Serie ei e5 e6 i3 i4 i6 i8 i7 i7+ J7 J7+ with Dyson V7 V8 V10 V10 V11

Adapter for cleaning a IRobot Roomba Serie ei e5 e6 i3 i4 i6 i8 i7 i7+ J7 J7+ with Dyson V7 V8 V10 V10 V11. Simple, no support, without snap mechanism.

Downloads
388
Likes
69
Rating
4.75
P
PrintablesZahg

RPi4 cases

Imported from Thingiverse. A couple of different cases for the Raspberry Pi 4. Low and tall version for Ø30 and Ø40 mm Noctua fans. Not sure about other brands, but should work for a couple of other ones. One version made to fit the 30x30…

Downloads
376
Likes
41
Rating
5
P
Printablesron

Modular case for Raspberry PI4 and an HiFi hat (Audiophonics, Hifiberry) or custom

Maturity Very Good 12 prototypes. In use since 2023/10. Model design from scratch. Hardware Hat spacers are 11mm height (as Adafruit quotes Nigel Tufnel's “These go to eleven”). The part “PiAndHatCase-rxx - Entretroise” is if you missing…

Downloads
371
Likes
29
Rating
5
P
PrintablesbyCx

Raspberry Pi 4 case (RPi4 + Waveshare PoE HAT + PiJuice for HomeAssistant)

I couldn't find a case for my Raspberry Pi 4 with PiJuice HAT and Waveshare PoE HAT installed so I made one myself. I use it for HomeAssistant but there is nothing HA specific so it can be used for anything else. FreeCAD source code is…

Downloads
370
Likes
63
Rating
4.5
P
Printablesdesaster

Focusrite Scarlett 2i4 2nd Gen bracket (easier print)

Under-table mount for Focusrite 2i4 2nd gen audio interface This is a remix of the 2i4 bracket by DJERO . The design has been modified to be printable on the side, and require no supports. Printing on the side should also make the tabs…

Downloads
350
Likes
47
Rating
5
P
Printableszeaky03

Raspberry Pi4 case

This is an old version, the new one can be found here . A simple case for a pi4 Uses 8 M2.5x7 screws Includes STL and STEP files

Downloads
337
Likes
17
Rating
0
P
PrintablesDanAndersen

SKR v1.3 V1.4 and Raspberry Pi4 RPI3, RPI4 and RPI5 compact case

I tried out many cases, but somehow my requirements were never met: Silent Case for the Raspberry PI4 and BigTreeTech SKR V1.3 , V1.4 or V1.4 Turbo Be able to Add / Remove electronics quick and easy, while the case can be in place. Small…

Downloads
317
Likes
28
Rating
5
P
PrintablesCarter

Slipcase for Pi4B+PiSugar3

This Case was created by/for BiblioTech Sans Frontieres, consider supporting them please. https://www.librarieswithoutborders.org/ New Version June 2024 larger, better cooling, better fit, easier assembly, etc This case is for the…

Downloads
313
Likes
14
Rating
5
P
PrintablesIchbinz

Case for Raspberry PI4 with GeeekPI Cooler and M.2 NVME

Pimped my Raspi with a 1TB NVMe Disk and a strong cooler. As I couldn't find a suitable case I made one - after some iterations it's good enough for my purposes, maybe also for someone else. I also attached the Freecad File.

Downloads
308
Likes
23
Rating
0
P
PrintablesKen226

BTT Pi4B CB1 case optimized for bridging, with integral supports

The problem I had is that the supports didn't allow for a surface finish that I liked. This Model has integral supports, that need to be popped off when the print is done. Before assembly. I optimized the design for printing in a specific…

Downloads
306
Likes
25
Rating
5
P
PrintablesBookaroo

Prusa i3 Octoprint Raspberry Pi3 and Pi4 embeded Einsy case

Update: Febuary 10th 2022, added a setting to print the original case and stl without the Raspberry Pi cut-out. Because of power issues when using power from the MK3 board, I have changed to an external case hooked to the frame just below…

Downloads
299
Likes
41
Rating
5
P
PrintablesOzRocky

Pi4 PoE+ SSD Case

This case is designed to hold a Pi-4 with PoE+ Hat as well as a standard 2.5” SATA SSD. Sometimes it’s useful to be able to boot your Pi from a SSD rather than an SD card. Attach the PoE+ Hat to the Pi-4 using the provided screws and…

Downloads
296
Likes
55
Rating
5
P
PrintablesHEAVYLIGHTS

Dye i4 GoPro Mount

Remix of Nutcrapper's i4 Gopro mount. I redesigned this mount to be printed with the rear side of the mount on the print bed, there are also other minor changes. I found the original design to break easily along the 'neck' when the GoPro…

Downloads
296
Likes
24
Rating
5
P
PrintablesMichal S.

RPI4B 4xSSD mini NAS case

Easy to assemble box for 4x SSD and Rpi4B. It can serve as a home NAS server. Passive cooling.

Downloads
287
Likes
70
Rating
0
P
PrintablesMatt Orelup

TI4 Play Area Frame - Twilight Imperium

This is a work in progress, but hosting the portion i've done so far. I've made the base structure have quite thin structural pieces so you should hopefully not use infill but just perimiters which will make the print speed much faster.…

Downloads
272
Likes
42
Rating
5
P
Printablesrualab

Ender 3 S1 Pro pi4 + piTFT50

Simple ventilated case. I use without radiators, with a fan for blowing inside, connected to 3.3v (not to 5 volts) - this is enough to cool and it is very quiet. In a room of 26 degrees C, the pi sensor shows 38-40 degrees C. Required:…

Downloads
270
Likes
63
Rating
5
P
PrintablesM.Kayed

Squirrelbrain Pi4 / BTT CB1 Case with Extrusion Mount

Squirrelbrain Pi 4 Case Extrusion Mount modified to fit Bigtreetech CB1/CM4 This will also still fit the Pi 4. Additional Changes: Opened sd card slot Added hole for antenna Widened a few screw holes for better clearance Made clearance…

Downloads
267
Likes
38
Rating
5
P
PrintablesGanjew420

klipperscreen Case for 7" 1024x600 IPS touchscreen and Raspberry Pi4

case for 7 inch 1024x600 IPS touchscreen and raspberry pi 4. case uses m2 screws to hold everything together.

Downloads
263
Likes
27
Rating
5

SI4732 SDR Radio Stand with front speaker opening

Supports used under the overhang on the bottom of the stand.

Downloads
248
Likes
12
Rating
4
P
Printablesde_baich

Shelly plus + Add-On mount (1PM/2PM/dimmer/i4/gen3)

First of all I want to thank @ Nelovy_08 for the model he provided. I remixed the model since I needed a bracket to hold a shelly plus 1 PM - 2 PM, also gen3, dimmer, i4 (and other shellys with the same shape) with the “plus Add-On”. The…

Downloads
246
Likes
11
Rating
5
P
PrintablesKen226

BTT CB1 Pi4B case with mounting holes for Voron DIN clips

This has all of the changes from my previous remix of this case, but with the addition of the thicker bottom and the hole pattern for Voron DIN clips. It has built-in supports, so you shouldn't need to add any. If you are using…

Downloads
244
Likes
19
Rating
5
P
Printableswedgeworks

Sneaks' Articulating PiCam V3/Prusa MK4/Geekworm RPi4 Supercut

All the parts you need for the Prusa MK4 and Raspberry Pi Camera Module Version 3. As with the original, the bracket (the piece holding the arm to one of the Z-mounts) requires one M3 x 16 mm cap screw. The Raspberry Pi 4 mount I chose…

Downloads
231
Likes
24
Rating
0
P
Printablesthelaguna

Affoldable RPi4 Case

What: This is a foldable and customizable Raspberry Pi 4 case. Using 3MF file directly in PrusaSlicer, you can decide which of the listed below, optional features you want to keep. Why: Somehow I couldn't find a case I'd like, so I…

Downloads
223
Likes
19
Rating
4.83
P
PrintablesR3tr0_D

Raspberry Pi4 Slim Case with 30mm fan mount and 2020 extrusion mount

Raspberry Pi4 Slim Case with 30mm fan mount and 2020 extrusion mount. Materials: 4x (m2.5x10) Fan Mount 2x (m3x8) 2020 Extrusion Mount 4x (m2.5x12) Slim Case The Fan grill has a modifier so that you can change the infill pattern to match…

Downloads
215
Likes
11
Rating
0
P
PrintablesCarter

HexCase2 for Raspberry Pi4B

HexCase2 is a Pi 4B case that fits the POE Hat from Raspberry and many other Hat boards… This case will need a new Case Bracket in order to mount onto the Prusa Mk3 frame. The Stand keeps the Pi4b PCB in place from the fit/force of the…

Downloads
209
Likes
31
Rating
0
P
Printableszerofox3D

Cubert AMNVOLT SI4732 ATS Mini Radio Case

Cubert is my case for the popular ATS Mini SI4732 Pocket Radio. This inexpensive radio supports many bands and is high regarded in the radio community. More information on the radio itself can be found in links at the bottom of this…

Downloads
207
Likes
17
Rating
5
P
PrintablesGeorge

Raspberry Pi4 Case for Prusa MK3/S/+

Remixed from WDR's model with the following changes: M2.5 screws to mount the Pi in the case so as to not have to enlarge the holes in the Pi. Removed extra space for the Pimoroni Fam Shim Made a version with the Pi-cam breakaway already…

Downloads
203
Likes
27
Rating
5
P
PrintablesIconic FAB

Raspberry Pi4 B+ (and Pi3 B+) mounting bracket

Bracket is designed to be used with 33mm DIN rail clips and mounting on DIN rail. Can fit other mounting styles as well. Print settings These are the recommended settings. Layer height: 0.2mm Extrusion width: 0.4mm, forced Infill…

Downloads
201
Likes
24
Rating
0
P
Printablesporouscloud

Raspberry Pi4 Hyperpixel Case

Raspberry Pi4 Hyperpixel Case (rectangular). Added vents to the side which is not obscured by the B2B connector. Based off the model by woodle.

Downloads
200
Likes
19
Rating
5
P
PrintablesLilifee

Raspberry pi4 HQ camera (aluminium mix)

A mix of a raspberry pi aluminum case with a RPI HQ camera enclosure. I wanted to re-use the back part of the aluminum case for a better cooling effect and added the HQ camera on the front. During the development of my web application for…

Downloads
197
Likes
28
Rating
5
P
Printablesmasket

Raspberry Pi4 DIN Rail Case

I modify the original case to adapt it to a raspberrypi 4, and ad four threaded inserts to close the box.

Downloads
195
Likes
15
Rating
5
P
PrintablesManzhou

simplest mini4wd double wishbone suspension

So I can't help noticing someone hasn't already made a 3D printed version of DHS suspension for MS chassis….I mean people been doing these mods for over 20 years, but mostly Tamiya spec mods that are both time and money consuming to make.…

Downloads
192
Likes
26
Rating
0
P
PrintablesSYSDmg

SI4732 Mini Stand (Modified)

Stand for the SI4732 Mini with amplification tunnel

Downloads
192
Likes
11
Rating
5
P
Printablesdikman

Raspberry Pi4 SSD attachment

Print 2 identical parts, use different screw holes for front and back bracket

Downloads
189
Likes
26
Rating
0
P
Printableszett

Raspberry Pi4 Gehäuse

gedruckt ohne Stützstruktur in PLA mit 0.2mm

Downloads
177
Likes
11
Rating
3
P
PrintablesRoberto

MEGA BOX MK3/S+ EINSY-RASPBERRY PI4 E PI3 CON USCITA HDMI - OCTOPRINT

Dopo aver analizzato le varie soluzioni trovate, ho deciso di progettare un box, per la scheda Einsy e il Raspberry Pi4, di mia iniziativa. Questo non è un remix ma un mio progetto. Ho cercato di includere ciò che serve alla stampante,…

Downloads
177
Likes
48
Rating
5
P
PrintablesOzRocky

Pi4 PoE+ SSD Case

This case is designed to hold a Pi-4 with PoE+ Hat and a standard 2.5” SATA SSD. Sometimes it’s useful to be able to boot your Pi from a SSD rather than an SD card. I’ve previously created a headless version but this one exposes the HDMI…

Downloads
172
Likes
27
Rating
5
P
Printablesjeepers01

Multifunctional Adapter Case for Raspberry Pi5 (& Pi4B Updated)

Multifunctional Adapter Case for Raspberry Pi5 (& Pi4B Updated)(& Pi4B Updated) **** UPDATE 09OCT25 **** As requested I have Added the file "Multi Pi4B Case v46" which suits the Pi4B Eth and USB connector arrangements.…

Downloads
166
Likes
19
Rating
4
P
PrintablesKolbi

Einsy+rPi4

Einsy Board + RaspberryPi 4 + DC-DC Stepdown, original case modification/remix, use original access door. Eisny-base.stl modification to allow for mounting rPi4 + dc-dc step-down converter while maintaining the original design look and…

Downloads
159
Likes
20
Rating
0
P
Printablesleonardo4ramon

RaspberryPi4 BTT SKR E3 Mini V3 Case

El diseño es un case compacto y funcional que alberga tanto una Raspberry Pi 4 como una placa BTT SKR E3 Mini V3, con espacio adicional para ventiladores para mantener una adecuada refrigeración. El case está diseñado como print-to-place…

Downloads
150
Likes
27
Rating
5
P
Printablesptitduke

Rasperry Pi4 and Hyperpixel4 square case

Case for Pi4 and Hyperpixel4

Downloads
150
Likes
21
Rating
0
P
PrintablesAlvcrumar

Dye i4 / FMA F1 Visera + Camara

Diseñe esta visera para ampliar la protección que ofrecen las mascaras de paintball/airsoft de tipo Dye i4 o su clon FMA F1, ya que suelen dejar la frente descubierta. Son modelos muy básicos ya que no tengo conocimientos de diseño y los…

Downloads
150
Likes
11
Rating
0
P
PrintablesMarkus

Focusrite 4i4 3rd gen undertable bracket

I printed mine with Ender 3, 0.8mm nozzle, PETG Fusion model has inside dimensions as parameters so it can be easily modified. Rubber pad holes are not parametric though.

Downloads
150
Likes
6
Rating
0
P
Printablessungo

RPi4B Profile Mount Case Remix for Pimoroni Fanshim

Remix of a remix here. First, I ran the bottom through netfabb which resolved a lot of errors. Second, I remixed the top to significantly short the screw pole closest to the GPIO pins. This allows one to use a Pimoroni Fanshim inside the…

Downloads
146
Likes
14
Rating
5
P
PrintablesTacticalBeanie

Hyundai I40 (2016) Parking pass holder

Replacement cupholder divider for Hyundai I40 (2016) with parking pass slot unsure if this will work with other Hyndai I series cars Designed to have a snug fit, recommending printing in PETG or ASA/ABS to avoid deformation

Downloads
146
Likes
6
Rating
0
P
PrintablesTimbroddin

Hyperpixel 4" Touchscreen + LCD + Raspberry Pi4 - without opening for power button (remix)

This is a remix of https://www.prusaprinters.org/prints/69731-hyperpixel-4-touchscreen-lcd-raspberry-pi4-for-oct It just lacks the power button opening. See the original for all the files (Pi enclosure, brackets, …)

Downloads
144
Likes
7
Rating
5
P
PrintablesDimation

921973Z520 hyundai i40 headlight mounting

921973Z520 hyundai i40 headlight mounting

Downloads
144
Likes
21
Rating
5
P
PrintablesSerge K

XP Mi4 cover

Printer settings: Filament: PETG Layer: 0.2-0.25mm Infill: NA Walls: 2 walls, 3 bottom Supports/rafts: not required [optional] fuzzy skin for 0.4 nozzle: contour, skin point distance 0.8mm, thikness 0.3mm I made a variation with a fuzzy…

Downloads
140
Likes
13
Rating
1
P
PrintablesLambtor

Another pi400 Cyberdeck - NERV inspired

Update 2022.10.11: Working on another screen frame to use one of these hdmi panel mounts: https://smile.amazon.com/gp/product/B09D924KLN https://smile.amazon.com/gp/product/B093WD6NB7 -This should enable a lot more flexibility in the…

Downloads
138
Likes
59
Rating
0
P
Printablesh4llow3En

Underware I4 Channel with wide cutout

A I4 Channel based on the Underware project by Hand on Katie . Perfect to route in cables from the side when the multiword ist not mounted via screws but mounted with VHB tape.

Downloads
137
Likes
32
Rating
0
P
PrintablesDoKa

Geekworm P173 Raspberry Pi4 Case Halter

Ich habe es in PLA mit 5 Wandlinien und einem Infill von 25% gedruckt, da ich es etwas stabiler mag. Das Gehäuse wird von der Seite eingeschoben und durch das USB-C Kabel gegen das herausrutschen gesichert.

Downloads
137
Likes
17
Rating
5
P
PrintablesBrainWorks

Pi4 Case for Prusa MK4 Base Frame Mount

Included are STEP file for your CAD tool, or directly the Fusion files. If you like the model as it is, the STL model files and the Slicer files. As a hint i uploaded also the print code made for a MK4. The board frame is hold by magnets…

Downloads
136
Likes
31
Rating
0
P
Printablestopz10

Raspberry Pi3/Pi4 2020/3030 Extrusion Mount

I needed a mount for my printers screen ( https://www.waveshare.com/4inch-dpi-lcd-c.htm ), so I modified an existing 2020/3030 extrusion mount to suite my needs. Remixed From: Raspberry Pi3 2020/3030 Extrusion Mount (…

Downloads
135
Likes
12
Rating
5
P
PrintablesBdaboy

Pi4 7" LCD Case with fan

Perfect Octoprint addition with a Pi4 and Touch Screen LCD. I built a LACK table and first thought about having the PI4 and LCD as two separate components but then figured it would be nice to have everything compact and organized so I…

Downloads
135
Likes
37
Rating
0
P
PrintablesRicardo Pereira

V2 - Simplifyed small version of 52Pi Ultra Thin Ice Tower Cooler - Raspberry Pi4 B - Modular CASE

This version is intended to be used with: https://52pi.com/products/52pi-ultra-thin-ice-tower-cooler-cooling-fan-for-raspberry-pi-4-model-b-cpu-fan it was draw and corrected based on this version:…

Downloads
127
Likes
9
Rating
0
P
PrintablesMotani_Works

WORKING I4 ENGINE

Working I4 engine , engine block from @ericthepoolboy, pistons and crankshaft made by me. I made it actually work , can work with a electric motor. or any other motor that can be attached to the crankshaft. The model can also be used…

Downloads
127
Likes
32
Rating
5