Search results: inboard

Sort order

420 models

P
PrintablesDockGuy

Modular ITX/DTX/mATX/ATX/SSI-EEB/SSI-CEB/EATX/XL-ATX mainboard frame/tray [Updated 2026-07-19]

Introduction This is a simple PC mainboard frame/tray system intended for open-air or custom enclosure PC builds. The intent is to support a broad variety of mainboards from iTX to so-called EATX with modules that fasten together with M4…

Downloads
3,797
Likes
430
Rating
4.56
P
Printablesfaultedlogic

JST Connectors for 3D Printer Mainboards

I'm currently in the process of upgrading the bulk of my 3D printers with 32 bit silent stepper driver boards. My first upgrade was to the CTC A10s which is a Creality CR-10 knockoff that came preinstalled with an Anet 8 bit mainboard…

Downloads
3,416
Likes
1,093
Rating
4.6

Framework Laptop 13 Mainboard Case

Documentation for the Mainboard in the Framework Laptop 13 (available at https://frame.work/marketplace/mainboards ). We designed the Framework Laptop 13 Mainboard from the start as a standalone module to make upgrades easy in the…

Downloads
1,919
Likes
456
Rating
5
P
Printablesstew675

Qidi Plus 4 Hex Mainboard Cover for 80mm fan with focused ducting for steppers, CPU, MCU

Discussion A replacement mainboard cover for the Qidi Plus4 that allows for the use of an 80x25mm fan This is a variant of my other honeycomb design posted on Thingiverse This variant positions the fan more centrally over the hottest…

Downloads
1,356
Likes
160
Rating
5
P
Printablesdressyspider

Ender 3 Series Mainboard Enclosure(s)

Summary: This build will allow you to mount a mainboard, 4 buck converters and a Raspberry Pi in an Ender 3 Series FDM Printer. See below for additional information or check the “files” section for combinations. If you choose to print…

Downloads
1,151
Likes
134
Rating
5
P
PrintablesJosh

Framework PC (Mainboard) case w/ VESA mount

Check out the new Framework x Cooler Master Mainboard case for US$39 BE CAREFUL the power button might get you into trouble. Currently only has the reference designs from Framework. Custom designs coming soon! Stay up to date on the…

Downloads
1,117
Likes
68
Rating
5
P
Printablesbeekrbonkr

Enamel Pin Display Board - Wall or Desk Pinboard Holder for Single and Multi-Post Pins

A display board for your enamel pin collection. The board is sized to fit single and multi-post pins, so you can arrange your collection on a desk or wall. It is a bit oversized on purpose: scale it down in your slicer to fit your…

Downloads
904
Likes
148
Rating
5
P
PrintablesTareku

Snapmaker U1 Mainboard & PSU Cooling Brackets for Noctua NF‑A9x14 Fans + Chamber Insert/Divider

This project includes cooling brackets for mounting 92 mm Noctua NF‑A9x14 fans to the Snapmaker U1 mainboard and PSU, along with a chamber insert/divider that improves airflow and adds thermal separation inside the electronics bay. Print…

Downloads
672
Likes
132
Rating
5

Framework Laptop 12 Mainboard

More information: https://github.com/FrameworkComputer/Framework-Laptop-12/blob/main/Mainboard/2D/Framework_Laptop_12_MB_Generic.pdf L aptop 13 Mainboard Case for inspiration: On board Power Button location:

Downloads
626
Likes
30
Rating
0
P
PrintablesChance Stad

Snapmaker U1 PSU and Mainboard 92mm fans

Tried to make the PSU side cover easier to print, and slightly stronger, changed pins to holers, and changed spacing, moved fan as much as possible towards vent, added notch for fan cable. Made the mainboard from scratch. it uses the same…

Downloads
559
Likes
86
Rating
4.88
P
PrintablesMagmabow

Framework Industrial Mainboard Case

Changed features provided in images; Much better airflow - including larger ventilation holes, rounded airflow paths, and additional airflow paths Ethernet Port - I read reviews from the original model and added a larger adapter port for…

Downloads
527
Likes
97
Rating
5
P
PrintablesStur0067

Qidi Plus 4 Hex Mainboard Cover for 92mm fan with focused ducting

A replacement mainboard cover for the Qidi Plus4 that allows for the use of a 92x25mm fan. I found that 92mm 24V fans were less expensive than 80mm ones so it's a good tradeoff. Here is the specific fan I used…

Downloads
520
Likes
91
Rating
4.88

Sovol SV08 MainBoard Cooling Plate

Twin 24v 6015 fans (do not get any thicker unless you know you have taller printed feet) single 8015 fan version is same clearance. The twin 24v 6015 fans produce less than 45db at 5ft distance and without printer on my room was 41db. so…

Downloads
496
Likes
97
Rating
4.8

MicroATX Mainboard Wall Mount

This is a wall mount bracket for a MicroATX PC Motherboard. It's best used with a single board computer like in my picture without an external GPU or external drives. Also a PicoSupply is advised. Of course you can still use external…

Downloads
450
Likes
41
Rating
0
P
Printables@CMprecison82

HAMTYSAN Raspberry PI 10" Touch Screen back mainboard enclosure

First enclosure, with sliding back plate for Touch screen. https://www.amazon.com/dp/B0B9M5SCG4?ref=ppx_yo2ov_dt_b_product_details&th=1

Downloads
433
Likes
14
Rating
4
P
Printablesyukosteel

Modular Mainboard cover for 60mm / 80mm / 92mm quiet fan - Elegoo Neptune 3 / 4 Pro

Modular Mainboard cover for 60mm / 80mm / 92mm quiet fan - Elegoo Neptune 3 Pro / 4 Pro Board cover consists of two sections - one with standard vents area, second - with mount for 60mm or 80mm fan. If you need to mount fan of another…

Downloads
403
Likes
81
Rating
5
P
PrintablesFreshPrints

Anycubic Kobra 2 Max Mainboard Cover Silent Fan Mod

Shut your loud machine up for good. Make your fans Wisper Quiet @ 19.9db Works with Kobra 2 Max List on Materials: Use a Noctua 12V fan you can use either a 92x14mm or 80x25mm just download corresponding model. I prefer the 92mm fan…

Downloads
393
Likes
60
Rating
5
P
PrintablesShadowChaser

Framework 13 Mainboard Case with Battery

Ever wanted to have your FW13 battery be part of your printed desktop setup? Just me? Fine. I use my FW13 mainboard as a small home server and wanted it to have its original battery in case of a power outage, as you would have a UPS with…

Downloads
389
Likes
94
Rating
5
P
PrintablesEsZett

120mm Fan Sovol SV08 Mainboard Cooling Plate with Speed adjustment

h' I remixed the model from Richard Ferrington for 120mm Fans. Maybe its needed to print Spacer Feets to allow more Airflow https://www.printables.com/de/model/867321-sovol-sv08-low-profile-vibration-isolation-feet i used the 35mm spacer…

Downloads
382
Likes
62
Rating
5
P
PrintablesEmbrace Making

Two Trees SP-5 BL Touch Mount, Runout Sensor Mount, Strain Relief, Bowden Guide, Mainboard Cover

Several easy upgrades for the Two Trees SP-5 (Sapphire Plus) as shown in the video below: Bowden Tube Guide (will need 2x M4x10 and 2x M4 T-Nut) Filament Runout Sensore Mount (will need 2x M4x10, 2x M4 T-Nut, 2x M3x20) Hot End Strain…

Downloads
375
Likes
20
Rating
0
P
Printables3DPrintDemon

Sovol SV06 SKR 3 EZ Mainboard Case Upgrade

…Please at least be sure to hit like & post a make, I'd love to see your prints! In conduction with 3DPrintDemon. Here's the all new mainboard case for the SV06 that is specifically designed for a SKR 3 EZ mainboard with 5 separate…

Downloads
373
Likes
89
Rating
5

Centauri Carbon Mainboard Fan-Chassis Isolator

Are you tired of that mainboard fan drone coming from underneath your Centauri Carbon? Often heard in between prints during cool-down or when anything on the printer is active. This takes the edge off the annoying sound by decoupling the…

Downloads
372
Likes
104
Rating
5
P
PrintablesGwebster

V2.0 Fanduct Driver Board mainboard Kobra S1

Hello 07.2025: V2 more robust and added a place for the original cables. I have noticed that the fan for the power supply and driver board on the Anycubic S1 blows into the case in a very undirected manner. With this fan, the airflow is…

Downloads
352
Likes
83
Rating
5
P
PrintablesMijoni

Ender 3 Maxi Flow Mainboard Fan Cover

A high-flow main board cooling fan cover for the Ender 3. (Stock fan on stock metal cover) This cover flows much, much more air than the smaller fan covers available to print. Installs using factory hardware. Print Settings Printer Brand:…

Downloads
347
Likes
36
Rating
5
P
PrintablesHijinx

BTT SKR v1.3/1.4/1.4Turbo Mainboard Case for Bear Frame

Important Notes: Looks like I got the labelling wrong (as did Jerlo :) who I copied w/o checking). Until I can fix it, please use the wiring guide here: https://www.biqu.equipment/products/btt-skr-v1-4-skr-v1-4-pro?variant=31220354187362…

Downloads
325
Likes
29
Rating
5
P
PrintablesManelTo

Framework mainboard v2 (with freecad files and step)

I also add the freecad file in case anyone wants to make modifications or corrections. The model is designed with version 1.0 RC2. In the previous stable version (0.21) of freecad it may give some errors.

Downloads
317
Likes
57
Rating
5
P
PrintablesDa Chris
Downloads
317
Likes
42
Rating
0
P
PrintablesYuriO

Sovol SV06 60x60x15 Fan Mainboard Cover

This is a mainboard cover for the Sovol SV06 with an 60x60x15 fan and built-in DC-DC converter mount in mind. The screw to adjust the voltage is exposed so you can adjust the voltage later on to reduce the fan speed. The honeycomb…

Downloads
279
Likes
49
Rating
5
P
PrintablesMaKmanIFest

Aquila Mainboard Bay for BTT SKR Mini E3

The Voxelab Aquila uses a different bolt mount pattern for its mainboard than the Ender 3... for whatever reason??? Unfortunately this means that drop in mainboard upgrades for the Ender 3 don't fit. Yay! So... I made a new mainboard…

Downloads
273
Likes
28
Rating
4.8
P
Printablesspuder

AnkerMake M5 Mainboard Fan adapter (40mm)

The stock fan on the M5 is a 30mm (24v) fan. Mine died after just a few days I replaced it with a larger WINSINN 40mm (24v) ball bearing fan WINSIN 40mm 24v Fan - Amazon This is the same brand as the stock 30mm fan WINSIN 30mm 24v Fan -…

Downloads
271
Likes
47
Rating
5
P
PrintablesLionel_Dagon

Ender 3 V2 Mainboard cover for 80x80 Fan

This mainboard cover is made to update the motherboard fan. You'll be able to mount a 80x80x24 Fan with a buck converter in this cover. Material required: 1x Buck converter --> https://www.aliexpress.com/item/32912622343.html 1x 80x80 Fan…

Downloads
271
Likes
46
Rating
4.25
P
PrintablesBootyCall Jones

K1 & K1 Max to Manta Series Mainboards Adapter Kit

Conversion Kit for K1 (Soon K1 Max) to BigTreetech Manta series mainboards. This it includes a Mainboard Adapter, a USB to RS232 adapter housing, and stock K1 mainboard fan adapter. Current Support: Manta M5P Manta M4P Future Support:…

Downloads
258
Likes
71
Rating
5
P
PrintablesBCDesign3D

SKR Pico mainboard mount

Rev. 2 ;) - Makeing mouinting position wider, do make a room for screwing easily… :) I specially design this to my Voron Switchwire (Enderwire) and for my Tiny-M , but it fits all 2020 extrusion as well… use M3x6 to fix the mainboart to…

Downloads
256
Likes
26
Rating
5
P
PrintablesThunderbird332

Ender 3v2/ Ender 3v2 neo Mainboard cover for 80mm x 25mm Fan (with fanguard)

Really liked the original design for fitment and wanted to use the same 80x25 mm Noctua NF-A8 ULN, which is almost inaudible. However I felt that the side vents weren't as effective as I liked them to be. Therefore i added some vents into…

Downloads
252
Likes
50
Rating
4.75
P
PrintablesTaylorb613

Ender 3 V2 mainboard side mount

I hated having to flip my printer over to get at the board so I rage-made a holder for it! Use supports on the top for the fan area and this is fine to print at .2. When assembling you will need M4 screws and nuts for the lid and the…

Downloads
249
Likes
39
Rating
5

Sovol SV08 Mainboard Cooling Plate

Single 8015 Fan to accommodate most cooling application needed other than short prints in PLA. This one is identical to the twin 6015 version so it should be less than 43db and have 20 CFM over factory 40mm fan. DOES NOT Allow for Stock…

Downloads
249
Likes
44
Rating
0
P
PrintablesBlaubartking

Sovol SV08 Mainboard Cooling Plate Remix

Add the Cutout for Original display cable.

Downloads
238
Likes
46
Rating
5
P
PrintablesThatGuy

Ender 3 v2 Neo 80mm mainboard fan shroud

This shroud is inspired by a few shrouds on Thingiverse. Since the fans on Ender 3 v2 Neo's run on 24v, I wanted something that would let me use a Sunon MF80252V11000UA99 to provide more airflow to the stepper controllers on the…

Downloads
226
Likes
53
Rating
5
P
PrintablesVilius

Ender 3 v2 Mainboard / motherboard cover with 40x40x20 fan

Mainboard / motherboard cover for Ender 3 v2 with 40x40x20mm (4020) fan. You can use a 4010 as well without printer risers. Fan mounting M4, cover mounting uses stock mounting holes and hardware. Supports are optional. Pictured white…

Downloads
224
Likes
26
Rating
3.5
P
Printables3dKaos

SKR Mini E3V3 - RPI - U2C - LM2596 Mainboard Case

Remix of parts of two main board boxes. This is set up to hold SKR Mini E3V3, RPI, U2C Canbus and LM2596 Buck Converter Mount holes are at 2.80mm so should self tap M3 Holes on the right of the case are for M5 Heat Inserts RPI fan is for…

Downloads
221
Likes
29
Rating
0
P
PrintablesMatthias

Sovol SV06 Mainboard Cover

Filament is from Sunlu Meta pla 3D PRINTING SETTINGS -0.4 Nozzle -0.4 Layer -40% Infill -Yes Supports Fan 24V 2-Pin 80X80X10mm

Downloads
221
Likes
47
Rating
4.67
P
PrintablesEebel

Mr. Baddeley Mark III Electronics Mainboard Mod Version2

My main electronics board for Mr. Baddeley's Mark III astromech (R2-D2 and the like). This board is designed to use all the standard parts plus Adafruits 16-Channel PWM servo driver boards. It has mounts for the following: Arduino Mega…

Downloads
212
Likes
66
Rating
0
P

Mainboard Cooling for QIDI Plus 4

Mainboard Cooling for QIDI Plus 4 UPDATE V2: New fans – Sunon MF60252V3-1000U-A99. They are less efficient than the previously used Dalap fans, but significantly quieter. Anti-vibration fan mounts instead of screws – helps reduce noise.…

Downloads
208
Likes
19
Rating
5
P
PrintablesCL Performance

QIDI X-Max 3 Silent Mod Fan adapter plate - Backplate Rearcover mainboard cover

If your printer is too loud, you have now the possibility to use the silent mod from my video. The noise comes from the rear cover and its 4010 fan. Step 1: choose the preferred fan mod. either the 4020 blower fan or the 6015 axial fan…

Downloads
202
Likes
35
Rating
5

Qidi Plus 4 Hex Mainboard Cover for 80mm fan with focused ducting High-efficiency Noctua 80mm fan grill

This mod is an upgraded mainboard cover for the Qidi Plus 4, designed to optimize airflow and cooling with an 80mm fan. Its focused ducting system enhances heat dissipation efficiency, keeping internal components at optimal temperatures.…

Downloads
197
Likes
24
Rating
0
P
PrintablesDavethegearhead

Creality K1 mainboard fan bracket

This bracket mounts the mainboard fan that is currently bolted to the bottom cover directly to the mainboard and adds an additional 4010 fan. You remove 3 mainboard mounting screws and replace with bracket & 3 M3 SHCS. I wanted to be able…

Downloads
196
Likes
55
Rating
5
P
Printablesbulbasaur0

Sovol SV06 Plus mainboard extruder cable support (remix)

Keep your Sovol SV06 or SV06 Plus extruder cable elevated with this cable support! This remixes itsrouteburn's Sovol SV06 Plus Print Head Cable Support for better stability with a more snug fit. Recommended pairing This model pairs well…

Downloads
190
Likes
25
Rating
5
P
Printables3DPrintDemon

Sovol SV06 & PLUS Manta E 3 EZ Mainboard Enclosure

…Please be sure to hit like & post a make, I'd love to see your prints! In conjunction with 3DPrintDemon. Here's the all new mainboard case for the SV06 & SV06 PLUS that is specifically designed for a MANTA E 3 EZ mainboard with 5…

Downloads
183
Likes
47
Rating
5
P

Framework Mainboard 19-inch Rack Mount

Inspired by my very first server, which happened to be an old laptop, I bring to you the 19-inch rack mount adapter for the Framework Mainboard. Breathe some new life into your old board! It can also be used as a desktop case if you don't…

Downloads
182
Likes
75
Rating
5
P
PrintablesDoctorStrobe

Ender 2 Pro Mainboard Fan Spacer

The Ender 2 pro has a very loud fan for cooling the mainboard components. It is a 50mm fan set up as an intake and blows directly at the mainboard. The main issue I found was that the fan is mounted fairly close (about 2mm) to the cover…

Downloads
182
Likes
28
Rating
5
P
PrintablesShriekingYak100

Ender 3 all in one, universal rear electronics case (For Creality 4.2.2 Mainboard)

*FOR CREALITY 4.2.2 MAINBOARD* I really liked Teaching Tech's Rear Electronics Enclosure for the Ender 3 Pro. My only problem was that I needed more buck convertors on the Raspberry Pi side of the enclosure. So I modified that with the…

Downloads
173
Likes
19
Rating
0
P
PrintablesHidayat

Adapter 5010 to 4010 (Ender 2 PRO mainboard fan)

The shape has a venturi effect. This allows more air with the same power. I hope you can also use this. Matierial: You need 2x M3 nut and 2x DIN 912 cap screws M3x20 As always, I wish feedback for continuous improvement.

Downloads
170
Likes
17
Rating
5
P

MicroUSB Pinboard Case

This is a case for Conrad Bannik's Micro USB DIP 5-Pin Pinboard . Note that the screw holes to mount the board is offset with 1mm because the Conrad's model does not fully match with the pinboards I have. The model is parameterized, so if…

Downloads
169
Likes
23
Rating
5
P
Printablesjcapp

Framework Mainboard Blade Center

This project extends the Framework philosophy of making “fantastic devices that are easy to repair” to creating a high-performance cluster from Framework Mainboards. The model files include all components necessary to make a chassis to…

Downloads
166
Likes
242
Rating
0
P
PrintablesBrewNinja

Sovol SV08 mainboard 4010 fans

The stock fan is pretty loud, and the stock shield really limits air movement, causing higher temps. This mod lets you replace both for better heat mitigation. I would recommend the 3-fan model, only because then you are blowing over both…

Downloads
164
Likes
37
Rating
0
P
PrintablesSascha

Alpaca Pinboard Hidden Magnet

I liked to original idea having a cool alpaka as a magnet. I modified the 3d model such that the magnet can be inserted during the print process. Not all materials seem to create a good first layer after the magnet has been inserted. ASA…

Downloads
162
Likes
12
Rating
0
P
PrintablesC4pt41nUn1c0rn

Framework 16 Mainboard Case - Full and Split Versions

I printed the official framework 16 mainboard case and found that the design was lacking in support for the expansion cards, resulting in the cards sagging and stressing the USBC port. You will need to print 5 connector pins to join the…

Downloads
161
Likes
21
Rating
5
P
PrintablesCyrill

Snapmaker U1 Mainboard Ventilator

Um die Temperaturen von 90 Grad an den Trreiber zu reduzieren habe ich diesen Lüfterhalter gedruckt. Man braucht noch einen 60x10 Ventilator und 2 M3 Einschmelzmuttern Drucken in PETG oder ABS

Downloads
157
Likes
41
Rating
5
P
PrintablesPitomio

Tatara/Anet A8 - SKR 1.4/Turbo mainboard and 2 mosfet case

Hello, this is a case for Anet A8/Tatara with SKR 1.4 and 2 mosfets(optional). Precise holes for a SD card and USB. Fan sizes are 120x120/80x80/40x40. There are a lot of space for cabels. Many holes for outgoing cables. Tatara style…

Downloads
156
Likes
18
Rating
0
P
PrintablesCJ_Elevated

CJ64 Framework Mainboard Keyboard PC Enclosure

Assembly Video - Parts List: Keyboard PCB (61 Key) PCB (64 Key) ADT-Link T3B-T1C 25cm WiFi Antenna Mainboard Screw Kit Keyboard PCB Screws Threaded Inserts 3mm Magnets Power Button(Optional) Power Shim (Seller On Break)

Downloads
155
Likes
54
Rating
0

[Compact] Framework Industrial Mainboard Case

Remix of the Framework Industrial Mainboard Case by @Magmabow. It removes the expansion card slots so that it's easier to plug directly into the USB ports on the main board. It also makes it so that it can be printed in two pieces on a…

Downloads
152
Likes
17
Rating
5
P
PrintablesScottyDoesKnow

Anycubic i3 Mega (S) Mainboard/Stepper Fan Duct - 50mm and 40mm

Remixed this fan duct to work with the stock 50mm fan, using M3 screws with slots for nuts to attach the fan easily. Then I made a version with the original hole size for the Noctua rubber mounting things, as well as 40mm versions of…

Downloads
152
Likes
23
Rating
5

Framework Mainboard case - minimal

This is a case for the Framework mainboard. This is based on the original design (very rigid) but slimmed down to work in one print and removed the unnecessary ports I was not going to use. If you want to use the framework as a blade…

Downloads
147
Likes
12
Rating
0
P
PrintablesSergej Riedel

Qidi Plus4 Mounting bracket for mainboard fan

Eine verbesserte Lösung zur Kühlung der Hauptplatine des Druckers, bestehend aus einem Hauptteil und einem Deckel für die Filterseite. Für den Lüfter habe ich mich für dieses Modell entschieden: https://www.amazon.de/dp/B086SKG982 ?. Der…

Downloads
145
Likes
23
Rating
5
P
PrintablesMarcin

Pinboard hook corkboard

Hook you can attach to pinboard using standard metal board pins. Make your corkboard more functional! Print recommendations: 0.2 Print without supports Used pins:

Downloads
145
Likes
59
Rating
5
P
PrintablesDL7MLP

Hoverboard Mainboard Enclosure

Simple Mainboard Enclosure for the older style of hoverboards. Useful for building a Transpotter with 80 x 40 mm or 40 x 40 mm extruded aluminium profiles. 3 holes for motor and gametrak connection and one to fit the stock powerbutton.

Downloads
143
Likes
7
Rating
0
P
Printableskrampus

Fan bracket mainboard Sovol SV08

The mainboard fan of the Sovol SV08 is a little small. A much better cooling is achieved with an 8010 fan. Two of the original mounting screws are used, and you also need two M3 hammer nuts, two M3x10 screws and two M3 nuts. The fan is…

Downloads
141
Likes
28
Rating
5

DIN Rail Mount for Creality Mainboards (4.2.2, 4.2.7, SKR Mini e3, etc)

This model is compatible with the following mainboards and any other mainboard with the same mounting holes: Creality 4.2.2 Creality 4.2.7 BTT SKR Mini e3 v2 BTT SKR Mini e3 v3 It's meant to be used with the Voron Design PCB DIN clip .…

Downloads
135
Likes
11
Rating
0
P
Printablesmarcwingduck

Ender 3 V2 Silent Mainboard Cover

This is a custom Ender 3V2 mainboard cover designed for the use with a 92x14mm fan (e.g. Noctua NF-A9x14 PWM) in conjunction with a 22x7mm step down converter (e.g. MP1584EN). There are clearance holes for using the fan either in a push…

Downloads
132
Likes
43
Rating
5
P
Printables3DPrintDemon

SOVOL SV08 MAX MAINBOARD FAN 80mm

Had enough of the stock 60db fan noise even sitting idle??! Well here you go, change that to 28.8db! BOM 4x M3 10-12mm bolts 4x Voron BOM M3 heat set inserts 3x M3 25mm bolts Dremel for grinding out the bottom cover's mesh to fit the fan!…

Downloads
127
Likes
28
Rating
5
P
Printablesgreytrimble

Framework Micro-ATX Mainboard & Battery Adapter

Adapter to mount a Framework 13" laptop's mainboard and battery in a generic PC mATX/ATX case. Requires 5x M2 screws of at least 5mm length. Use the washer STL if your screws don't have wide enough heads. See photo: No supports required,…

Downloads
127
Likes
33
Rating
0
P
Printablesgreytrimble

Framework Mainboard Case with Battery

This is a modification of the “ bottom_cover_l_cut.stl ” and “ bottom_cover_r_cut.stl ” models from the official version . Adds the ability to mount the official battery in a minimalist manner. You should visit the official version to…

Downloads
121
Likes
31
Rating
0
P
PrintablesD1uxe

Anycubic Kobra Mainboard Cover with 92 mm fan

Remix on “ Anycubic Kobra - Mainboard cover for 80mm fan ” by lucky449 One day I started to hear a lot of noise from my 3d printer, so I decided to replace a fan at the bottom, I choose 92 mm fan as the biggest that fits and simply…

Downloads
116
Likes
23
Rating
0
P
PrintablesAndr3a

Support mainboard pc

Support for PC mainboard (M-ATX, ATX, E-ATX)

Downloads
115
Likes
14
Rating
0
P
PrintablesThommyfix

Shells as holder for pinboard

The shells are printed with " colorfab PLA woodfill"; 0,15mm Layer and 0,6mm Nozzle. After printing the woodfill shells are colored with wood stain. In the bottom, a negative volume for a magnet 3.5 x 3.5 x 4mm was cut out before slicing.…

Downloads
114
Likes
16
Rating
5

Ender 5 Plus Bigtreetech SKR V1.4 SKR 2 Mainboard Mount

This is a mounting plate for the Bigtreetech SKR V1.4 Turbo to be mounted in the Ender 5 Plus. As shown in the pictures, this plate centers the board in the chassis so that you can run cables where ever you like. This is more universal…

Downloads
112
Likes
9
Rating
0
P
PrintablesTeak

Minimalist Framework Mainboard Case, 2-piece, Optimized Airflow

A minimal case for the Framework Mainboard. Prints in only two pieces, unlike most, and fits on a standard MK4 print bed (or equivalent size). In the name of minimalism and size, this case has no support for the USB modules, audio board,…

Downloads
107
Likes
19
Rating
0
P
PrintablesAlberto Rosales

Artillery Sidewinder x3 Mainboard front ventilation Mod

The model is designed to extract the hot air generated by the motherboard and its drivers; it is a lid with a grill that redirects the air to the outside. Print with the grid by sticking with the printing plate Printed in PLA, Horizontal…

Downloads
105
Likes
16
Rating
0
P
Printablessebastian

Tronxy x5sa Mainboard

Tronxy x5sa Mainboard mit 24v zu 12v Wandler

Downloads
102
Likes
15
Rating
0
P
PrintablesJust Line

Snapmaker U1 Mainboard Cooling Box 60x60x15 Fan

Designed to protect the motherboard and drivers when using an active chamber heater. The enclosure provides localized cooling for the heatsink and motherboard while minimizing airflow disturbance inside the heated chamber. Exhaust airflow…

Downloads
102
Likes
42
Rating
0
P
PrintablesTeachingTech

FLsun Super Racer Raspberry Pi mount / mainboard spacer

This is an adaptor to fit a Raspberry Pi alongside the standard SKR V1.3 clone mainboard in the top electronics case. The mainboard is moved into the centre of the case, with mounts added for a Raspberry Pi and buck converter. The…

Downloads
98
Likes
20
Rating
0
P
PrintablesCromFr

Ender 3 S1 Pro mainboard and PSU 60x25mm fan mounts

The mainboard / motherboard fan mount is 6mm high and can be installed with the standard printer feet. The PSU fan mount is 11mm high and requires higher printer feet (I used these ). Installing the fans requires cutting holes inside the…

Downloads
98
Likes
34
Rating
5
P
PrintablesHassla

TwoTrees SK1 - 120mm Fan adapter for the Mainboard

An adapter for 120x15mm fan for the TwoTrees SK1. MCU Temp. dropped around 25°C BASE RISER NECESSARY One of the Parts can be used with magnets. If this is not desired you can either use tape to glue it to the frame or use the part to…

Downloads
98
Likes
11
Rating
0
P
PrintablesJessi

Ender 3 S1 - Mainboard and PSU Fan Mod

~~~~~ IMPORTANT ~~~~~ FAN INSTALLATION: Make sure you install the fan as intake and the other as exhaust . If you don't know which direction of the airflow of your fans, there is usually an arrow on the sides of the fan. That indicates…

Downloads
92
Likes
25
Rating
0
P
Printablesbunnyology

3D Printer Mainboard (Octopus) Mount with Fan

Please note: the fan mount has to be printed mirrored! These two parts allow to mount a BTT Octopus V1.1 or Octopus Pro to a MDF (or similar) plate including a 80mm cooling fan on top. The cooling works very well. It brings the formerly…

Downloads
92
Likes
6
Rating
0

Stand Alone Main Control Case with Modular Mounts for Various Mainboards, Display's, CPU's and MORE!

This is a work-in-progress and will be changing frequently!!! Forethought I designed this Control Box in 2018 out of the need for one. All the cases I found were specific to one machine and one mainboard. So if I wanted to change the…

Downloads
91
Likes
19
Rating
0
P
PrintablesR4nd0lf

10" Rack Case for Framework 12 Mainboard

A case for the Framework 12 motherboard. Made for INDX / AMS machines. The power button works a piece of filament threaded through a channel. A male angled USB-C to female straight USB-C cable is neccessary. There is a cutout to…

Downloads
89
Likes
119
Rating
0
P
Printablespex

Electric Mountainboard - 72t HTD 5M 15mm Pulley with Trampa Hypa hub Adapter

72t HT5M 15mm Pulley with Trampa Hypa hub Adapter, for 8 inches pneumatic wheels. Pulley printed in Alloy Nylon 910 - 50% infill and 6 layers Top/bottom/walls. Adapter printer in Advanced PLA 100% infill. It takes me a lot of time and a…

Downloads
89
Likes
15
Rating
0
P
PrintablesDrexplotionpd

Voron Creality V2.2.1 Mainboard DIN mount

wanted to convert a cr10 to use Vorons electronics bay setup so I needed to adapt my V2.2 mainboard to the DIN rails. came up with this simple plate that uses the existing DIN brackets that can be found here:…

Downloads
89
Likes
6
Rating
5
P
Printablesistvan

Ender 3 V2 flipped mainboard case

First time I used PETG, it got unstuck at the left edge, but still finished the print OK. Used M3x5x5 threaded inserts to hold down the mainboard. Used self tapping screws to hold the 2 pieces together and reused the original case screws.

Downloads
85
Likes
7
Rating
0
P
PrintablesWingedFuse

M18A1 Claymore Case for Framework Laptop 12 Mainboard

The M18A1 Claymore Case is a fully 3D-printable mini-PC enclosure built to look like the M18A1 Claymore anti-personnel mine including the "FRONT TOWARD ENEMY" lettering and the tripod stand. Underneath the tongue-in-cheek military shell…

Downloads
84
Likes
100
Rating
0
P
PrintablesNitek

Ender 2 Pro Mainboard Fan Duct

The Ender 2 Pro mainboard fan is noisy and air flow doesn't seem have had any priority. This im my attempt to fix this with a small and simple printed pice. No glue needed, just push in place.

Downloads
84
Likes
15
Rating
0
P
Printables3DPrintDemon

DIN Rail Mainboard COOLBAR! Clip on fan module for mainboard cooling! SKR 3 EZ or Octopus Pro!

…Please be sure to hit like & post a make, I'd love to see your prints! The COOLBAR uses 3x 4010 axial fans to cool anything that'll fit under them. PSU's, mainboards, Rpi's SSR's, …anything! They're big enough for a SKR 3 ZE with EXP MOT…

Downloads
84
Likes
27
Rating
5
P
Printables3DMK

1U IO Shield/Backplate for Supermicro A1SAI/A1SRI Mainboards

Backplate for Supermicro A1SAI/A1SRI Mainboards, usable in a 1U Supermicro Chassis where standard ATX backplate is too big. Print instructions Category: Computer

Downloads
83
Likes
3
Rating
0
P

3D Printable Mainboard Case Circuits Style

Made a cosmetic redesign and created 2 options for each of the top and bottom pieces so you can mix and match as you want!

Downloads
82
Likes
28
Rating
0
P
PrintablesNathanKun

Framework 13 Mainboard Case Top Cover with fan cutout

This is a remix of the official Framework 13 Mainboard Case's Top cover. Added some cutout to install a 120mm fan. I use a Noctua NF-A12x25 5V PWM fan, installe with the silicon anti-vibration mounts which come with the fan. It works…

Downloads
82
Likes
18
Rating
0
P
PrintablesStefan

Halter Mainboardlüfter Sovol SV04

Lüfterhalter um den lauten Mainboardlüfter des Sovol SV04 gegen einen leiseren 92x92x15 Lüfter zu tauschen. Der Halter wird mit den originalen Lüfterschrauben festgeschraubt. Im Halter (Stütze) kann ein Step-Down-Wandler untergebracht…

Downloads
82
Likes
11
Rating
5
P
PrintablesRESTLESS DESIGN

Mainboard Vent Cover

Another dust cover for the Anycubic i3 Mega. You can use four M4 bolts to secure this cover to the printer. I would recommend you tap the holes first, since this is the stronger compared to letting the bolts tap the metal. Support If…

Downloads
78
Likes
8
Rating
4
P
PrintablesGrey Wolf

Qidi Plus 4 Better Mainboard cooling

English: Qidi made a design error with the back panel. While the fan is nicely centered in the original design, the airflow completely misses the MCU and drivers. That's because they are located further to the left and higher. For this…

Downloads
77
Likes
6
Rating
5
P
PrintablesJeffBrazzos

Ender 3 8010 fan mainboard cover silencer

Ender 3 mainboard cover with 80mm x 10mm (8010) fan mount. Integral rear facing silencer. Mount fan from inside with 4mm x 12-16mm screws. Print inside surface facing down. No support required. Enable bridging. Print Settings Rafts: No…

Downloads
77
Likes
9
Rating
3