Search results: j1

Sort order

335 models

P
PrintablesJerrari

EV Charger Holder J1772

Tired of your charging cables laying all over the place, tripping over them at night? Why are you in the garage in the dark, at night?? The ⚡ EV Charger Holder J1772 ⚡ is designed to hold an at home Level 2 EV charging plugs and cables…

Print approx. €5.37–€6.56 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,563
Likes
529
Rating
4.92
P
PrintablesKen

J1772 EV Charger Holder

J1772 Charger Holder. Slim profile - doesn't stick out from the wall too far. Mounting holes are aligned so that you can mount it to a single stud. Loop the extra cord over the top. No supports needed as long as you print it on its side…

Print approx. €7.87–€9.62 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,026
Likes
307
Rating
4.89
P
Printablessternli27

Makita DPJ180 Plate Joiner Flachdübelfräse Lamello Box

Printed in two halves, because of the large size. No support needed. Connected by 2.5x8mm cylindrical pins and/or glue. There is a small gap when the box is closed. To make sure no parts escape from the organizer when the box gets tilted,…

Print approx. €16.41–€20.05 excl. taxPreliminary estimate for one variant

Downloads
234
Likes
57
Rating
4.5
P
Printablesdradam

180 degree Pivoting J1772 wall mounted charger holder

Swinging J1772 bracket that allows you to lay the charger flat against the wall and swing it out as needed. Printed in PET 40 % but may go higher depending on longevity. Prints in place as one object. A little crunchy in the joint as the…

Print approx. €10.42–€12.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
22
Likes
4
Rating
0
P
PrintablesPlainsPrepper

Replacement Wall Mount for Waterproof Shower Phone Holder (Model B09PRCJ1W8)

This STL file provides a replacement wall mount designed to match the original dimensions of the waterproof shower phone holder, model B09PRCJ1W8. Over time, the adhesive backing of the original mount may lose its grip, especially in…

Print approx. €1.40–€1.72 excl. taxPreliminary estimate for one variant

Downloads
9
Likes
0
Rating
0
P
Printablesisaacf

Tesla Model 3 Driver's Door J1772 Adapter Dock - Rear Mounted

This is a J1772 adapter dock for the Tesla Model 3. The dock is inserted into the rear of the door cubby and holds the charging adapter in a forward-facing orientation. Since the dock sits in the back of the cubby, it only takes up a…

Downloads
3,259
Likes
298
Rating
4.9
P
Printablesisaacf

Tesla Model Y Driver's Door J1772 Adapter Dock - Rear Mounted

This is a J1772 adapter dock for the Tesla Model Y. The dock is inserted into the rear of the door cubby and holds the charging adapter in a forward-facing orientation. Since the dock sits in the back of the cubby, it only takes up a…

Downloads
3,130
Likes
248
Rating
4.96
P
PrintablesKen

J1772 EV Charger Holder - Remix

Similar to my other model, but the charger is inserted perpendicular to the wall. This provides easier access, but does make the charger stick out further from the wall. The whole reason I made the first one was to get something flat up…

Downloads
1,329
Likes
119
Rating
4.85
P
Printableswedgeworks

J1772 Adapter Lock for Tesla Model S 3 X Y

Ensure the safety and security of your Tesla electric vehicle with this Tesla J1772 Adapter Lock. Designed with Tesla owners in mind, this innovative accessory provides peace of mind and convenience when charging your Tesla Model S, Model…

Downloads
1,041
Likes
104
Rating
4.67
P
Printablesryantaylor

Bi-Directional J1772 Tesla Adaptor Lock

A design by EGoe from Thingiverse for a J1772 Tesla Adaptor Lock, with some considerate modifications: Bi-directional There is a small press-fit that helps keep the ring attached to the adaptor while you carry it around. There are two…

Downloads
900
Likes
101
Rating
5
P
PrintablesThrustmaster

THRUSTMASTER : Clip for RJ12 cable Pedals

Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) Materials recommended: PETG For better durability, 100% Infill Printer used for prototyping: Prusa MK4 Type of bed used for prototyping:…

Downloads
714
Likes
48
Rating
3.67
P
Printables3DPrintDemon

SOVOL SV08 M12 Inductive Probe Mount LJ12A3-4-Z/AX

…Please be sure to hit like & post a make, I'd love to see your prints! Add a highly accurate M12 LJ12A3-4-Z/AX inductive probe to your SV08! This probe is a NPN NC probe. This means it is normally closed & will provide a “low” signal…

Downloads
683
Likes
145
Rating
5
P
PrintablesThomas Levendig

Top Panel Riser - For Snapmaker J1

Snapmaker advises against printing PLA with the top panel on the printer, because the environment heats up which can cause heat creep. If you still want to be able to use the top panel on the printer while printing PLA, you can use these…

Downloads
615
Likes
35
Rating
5
P
Printablestrentjk

J1772 EV Charger Wall Mount Holder Remix

This EV Charger wall mount for J1772 plugs takes up a lot less space, protruding less than 3" (76 mm) from the wall! The 90° plug at a 45° downward angle is accessible and easy to plug in. Features: No holes in your wall! The wall mount…

Downloads
475
Likes
48
Rating
4
P
Printablesnimrod86

Technics SL-J110R Hinge

The Technics SL-J110R has a flawed hinge design where the spring is too strong and cracks the plastic. As these record players are pushing 30 years old, there are no new hinge available, and most of them seem to have broken. Taking…

Downloads
449
Likes
14
Rating
0
P
PrintablesKXNT

Tesla Model 3 J1772 adapter holder for door cup holder

Designed to fit my 2020 Tesla Model 3, may fit other years as well. I downloaded another model from here that was designed to fit a 2021 and it did not fit my 2020 so made my own Tesla Model 3 J1772 adapter holder for door cup holder.…

Downloads
421
Likes
46
Rating
5
P
PrintablesLyricPants

J1772 EV Charger Wall Mount Holder

A simple wall mounted holder for the AC port of a CCS1 charger. Please check your vehicle charger for compatibility. Mounting This model was designed to be mounted directly on the wall, utilizing key-hole slots to be easily placed and…

Downloads
413
Likes
30
Rating
5
P
Printablesmrmoralhazard

120mm Fan Adapter for Gigabyte MJ11-EC1 and MJ11-EC0 Cooler

This is a simple fan adapter / mounting bracket for mounting a 120mm fan on the original cooler of a Gigabyte MJ11-EC1 mainboard with AMD EPYC Embedded 3151 CPU. With this mod the cooler is whisper quiet and other components (RAM, NVME…

Downloads
405
Likes
16
Rating
0
P
PrintablesJon H

J1772 Nissan Leaf OEM holder and wire wrap

Printed .2 Supports not needed but is cleaner.

Downloads
403
Likes
59
Rating
4
P
PrintablesWombley

Printable Snapmaker J1/J1s 40mm Riser

A completely printable 40 mm lid riser/top hat for the Snapmaker J1 or J1s. Inspired by edgett’s “Snapmaker J1/J1s Tophat” here on Printables which requires custom aluminum sides and Thomas Levendig's "Top Panel Riser - For Snapmaker J1"…

Downloads
383
Likes
32
Rating
5
P
PrintablesChrisUFO

Snapmaker J1 - UFO Part Cooling Fan Mod

There are three versions: R3 - Uses M3 screws and heat set inserts for assembly (recommended) R3b - Uses M3 screws and captive M3 nuts for assembly R3c - Uses 5mm x 3mm magnets for assembly This prints in two parts and then assembled. You…

Downloads
381
Likes
52
Rating
5
P
PrintablesModern Crafts

Snapmaker J1 PTFE Guide

To make filament loading easier and reduce the drag on the filament I designed this PTFE guide. It is designed for the original reverse bowden tube which has an outer diameter of ~4.4mm (instead of the normal 4mm). I would not recommend…

Downloads
364
Likes
36
Rating
4.83
P
PrintablesAtle

Snapmaker J1 / J1S Simple Fan Shroud Upgrade

This is a direct replacement of the stock Snapmaker J1 / J1S part cooling fan shroud. It moves the air directly to the tip of the nozzle, and not onto the heat block as the original one does. The air should also flow better on all sides,…

Downloads
341
Likes
33
Rating
4
P
PrintablesKXNT

Tesla J1772 Lock Ring

Lock ring for the Tesla J1772 adapter to keep people from unplugging your car while charging.

Downloads
324
Likes
25
Rating
5
P
PrintablesThomas Levendig

Longer Spool Holder - For Snapmaker J1

The original spool holders on the J1 can be a little to short for some spools. Easily print this version, which locks in place with the same system. With this spool holder, you can use spools up to 96mm wide. Printing: No supports are…

Downloads
310
Likes
24
Rating
5
P
Printablesryantaylor

Tesla J1772 Charger Door Insert/Holder

A Tesla (Model 3 '21) J1772 Charger Door Insert/Holder by richardlonwalker . This is a helpful model for remixing for those who don't want to open the trunk to grab a charger adapter. Some suggested modifications based on test print (see…

Downloads
308
Likes
37
Rating
5
P
PrintablesJames

J1772 EV Charging Cable and Plug Holder Remix

J1772 Charger Holder designed by Ken . This is a great design with a slim profile perfect for an area with limited space. I just added higher cable holder walls similar to trentik's remix , and rounded the corners. Print in the…

Downloads
302
Likes
30
Rating
5
P
PrintablesDylan

PTFE Guide for Snapmaker J1

A PTFE Guide will fit into my glass lid lifter: https://www.printables.com/model/546618-snapmaker-j1-top-frame-with-glass To make printing easier, I designed a support structure that you can easily remove after printing. PETG/ABS, no…

Downloads
294
Likes
25
Rating
4.67
P
PrintablesHMartinez

SnapMaker J1 Front Load Spool Retrofit

This retrofit converts a Snapmaker J1 from rear-mounted filament to a front-loading spool system. The two filament holders utilize the empty space inside the printer to the left and right of the bed and can be loaded from the front which…

Downloads
290
Likes
35
Rating
5
P
Printablesmkoistinen

Tesla Model 3 Console Tray with integrated USB Hub + J1772 Slot

OK, so this is a remix of my own model here: https://www.prusaprinters.org/prints/5805-tesla-model-3-tray-wj1772-storage-slot . I've integrated a USB Hub into the tray. This essentially adds 3 more USB ports, which is perfect for me to…

Downloads
290
Likes
104
Rating
5
P
Printableslemmaa

Snapmaker J1 bed-leveling patterns

This is the bed leveling pattern for the Snapmaker J1. Made for manual adjustment after auto bed leveling. Circular patterns are great for comparing minute differences across the entire bed, but the removal process is hell. For ease of…

Downloads
278
Likes
23
Rating
0
P
PrintablesModern Crafts

Snapmaker J1 Filament Feedthrough

This is a simple filament feed-through for the Snapmaker J1, if you want to put the spools inside the printer. There are version which go straigt up and versions that are tilted 20 degree to the left and right. You don't need any tools or…

Downloads
276
Likes
21
Rating
5
P
PrintablesModern Crafts

Snapmaker J1 Internal Spool Holder

Simple Spool Holder to install the spools inside the printer. This makes them more easily accessible, saves space behind the printer and allows you to immediately see which filament is loaded. I decided to make use of the two individual…

Downloads
273
Likes
25
Rating
4.75
P
Printablesedgett

Snapmaker J1/J1s Tophat

The factory filament routing on the Snapmaker J1/J1s IDEX 3D printer requires a sharp bend at the top of the print head. The filament guides frequently rub against the top of the printer. This tophat adds an additional 80mm of height to…

Downloads
268
Likes
20
Rating
0
P
PrintablesMN

Snapmaker J1 Interior Spool Holder

Update 11.03.2023: Spoolholder1 replaced by Spoolholder2 Update 06.03.2023: Base plate V2 left and right with mount for ptfe tube. Works with 8mm rod. So the spool cannot easily slip off the stand and damage the printer. The spool holders…

Downloads
256
Likes
25
Rating
4.5
P
PrintablesTwentySix2

J1772 Plug Holder with Cord Management for EV chargers,

We have a PHEV and wanted to have a place to keep the charger cord outside since the car is most often parked in the driveway. SCRAT82 had a great design but the screw centers were too close - we wanted the screws to line up with the…

Downloads
255
Likes
42
Rating
4.67
P
PrintablesModern Crafts

Snapmaker J1 Partcooling Fan Shroud

To be fair, this fan shroud barely improves the partcooling. On some prints there was a slight improvement, on other prints it was exactly the same result. I think with a more powerful partcooling fan like the GDSTime 12000 RPM Fan it…

Downloads
245
Likes
15
Rating
5
P
PrintablesDylan

Hotend Adjust Tool for Snapmaker J1

The hotend module is difficult to align when locking the nozzle, this fixture helps you easily align the heater and the pipe. .stl file here only apply to the left module(L), you can print the right side using the mirror mode on J1…

Downloads
243
Likes
33
Rating
5
P
PrintablesBasementLAB

Jimny Suzuki Type J1 - J4 - Key chain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger

Jimny Suzuki Type J1 - J4 - Key chain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize/scale to adjust dimensions All our designs are free to download and use. Your support fuels our creativity. If you downloaded and enjoyed…

Downloads
241
Likes
19
Rating
0
P
PrintablesElanaut

Wall Mount J1772 Holder

Just got an EV after my old car finally had enough. I designed this wall-mounted J1772 connector holder with a built-in cable hanger that can be printed without supports. The mounting holes are for (2) #10 pan/button head screws. This can…

Downloads
234
Likes
14
Rating
5
P
Printablesmkoistinen

Tesla Model 3 Tray w/J1772 storage slot

I had a look around and saw that there were some models like this already, but I wanted to make modifications and found that editing the STL files was a nightmare due to their construction in other programs. So, I set out to make my own…

Downloads
227
Likes
39
Rating
5
P
PrintablesGrant

Tesla J1772 Adapter Charger Plug Holder

Holder for J1772 charger plug with Tesla adapter attached. I liked Gizmotoy's rounded plug holder (based off of jakepoz's non-rounded plug holder), but it doesn't fit Tesla's J1772 adapter, which is much thicker a little too close to the…

Downloads
226
Likes
27
Rating
5
P
PrintablesDaniel Gustorff

Snapmaker J1 higher mounting lid with optional ventilation

I found the original and another version with airflow slots. However, I wanted a solution that could be both ventilated

Downloads
214
Likes
21
Rating
5
P
PrintablesMiki

Cable Chain J15BF.1.15N

It can print with No support . The 2 End Links have built in Support. I use this chain on my Voron 2.4 (10x15 originaly) The 3mf file has all parts needed without support ,just multiple the link and the latch. I've printed: 0.2 layer…

Downloads
207
Likes
31
Rating
5
P
PrintablesWikiNic

Elegoo Nepture 3 Pro RJ11 port cover

This is a simple dust cover for the RJ11 port used by the detachable screen on the Elegoo Neptune 3 Pro printer. I'm not using the detachable screen anymore because I'm using Klipper. This snugly plugs the hole left behind.

Downloads
204
Likes
16
Rating
0
P
PrintablesNamrepus221

Guitar Hero PS3 Les Paul RJ11 USB replacement

This model fits the PS3 (and maybe Xbox 360) Guitar Hero Les Paul controller. It replaces the unused RJ11 port on the guitar with a passthrough for a USB cable for Arduino-modded controllers for use with a more modern system and the…

Downloads
202
Likes
14
Rating
5
P
PrintablesERIK3DP

Outside Mounting Cover for Rosahl M-1J1R Electric Dehumidifier Membrane based Filament Drybox or Bambu Lab AMS

Please see my updated version of the Rosahl M-1J1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…

Downloads
196
Likes
51
Rating
0
P
PrintablesJames Bufkin

Snapmaker J1 or J1S tophat printable remix with Chamber Heater

Printable side panels and corners. Use M4x12 screws with inserts. The holes on the corners are good enough that you don't need inserts. You can use nuts and M4 bolts to attach the panels together. You need 6 short panels,2 long panels, 4…

Downloads
189
Likes
20
Rating
5
P
PrintablesModern Crafts

Snapmaker J1 Magnetic Bowden Coupler

I saw a similar bowden coupler and really liked the idea. So I made my own version which works with both, the standard PC4-01 M10 bowden couplers for 4mm bowden tubes or with the original 4.4mm reverse bowden tubes of the Snapmaker J1.…

Downloads
183
Likes
21
Rating
5
P
Printableshag

Simple J1772 Dummy Socket

Another J1772 dummy socket for your charge cable. There are already a few of these on Thingiverse, but I decided to design my own because I wanted a cleaner look to it. The other ones that I considered printing all had a pretty big…

Downloads
177
Likes
21
Rating
5
P
PrintablesTheT1designs

Nissan Qashqai J11 silhouette / keychain

Are your car keys feeling lonely? Or do you want a silhouette of your car? Look no further! You can add a nice-looking keychain or a silhouette of a Nissan Qashqai SUV for both cases. 0,4 nozzle 0.2mm layer, 2 walls No support needed. I…

Downloads
169
Likes
12
Rating
5
P
Printablessphink

Gridfinity 2x5x4 holder for network crimper plier (rj45/rj11)

Gridfinity holder for network crimper plier, made for a crimper with 19cm length, 6cm width at handle. 2x5x4 no magnets.

Downloads
169
Likes
29
Rating
5
P
PrintablesGixto

DEWALT On/Off Knob (DXAEJ14)

Print as oriented and supports should not be needed, a brim may be necessary to ensure enough build plate adhesion. I printed it at a 45° angle to help prevent the “forks” from shearing off when rotating the knob. I printed with a 0.35mm…

Downloads
168
Likes
7
Rating
0
P
PrintablesVWELD

VW Golf MK4 1998 2004 headlight cover cap 1J1941607B vweld

I made a rear protection cover for the golf 4 vehicle spare part light Replacement part Enjoy!

Downloads
166
Likes
14
Rating
0
P
PrintablesKeith Kyzivat

Angled J1772 Dummy Receptacle - Bigger J1772 securing pin

This is a remix of hag's J1772 Dummy Socket model, for which I have enlarged the opening holding the J1772 handle's pin that keeps it in place in the receptacle. The receptacle itself is angled, and has two holes for screws*. Good for…

Downloads
161
Likes
6
Rating
5
P
PrintablesPhantom987C

J1772 EV Charger Mount and Cable Hook - Remix

Added a little update to this one: Strengthened structure in the cable hook area and updated for using 2 bolts rather than countersunk screws. Also made the back plate more robust. Probably overbuilt for most people… 7mm through holes.…

Downloads
159
Likes
18
Rating
5
P
PrintablesDrJoe

92mm Fan Adapter for Gigabyte MJ11-EC1

Bracket to mount an 92mm fan on the stock cooler on the Gigabyte MJ11-EC1 Mini-ITX server motherboard. Made for M3 threaded inserts, holes are 4,0mm. Uses the stock standoffs to mount on the cooler, those are M3 as well. Countersinks for…

Downloads
159
Likes
6
Rating
0
P
Printableslemmaa

C270 camera mount for Snapmaker J1

It was made to mount the C270 camera on the front of the enclosure frame. Currently, the camera cable is being tested by temporarily pulling it out through the gap in the front door. I plan to eventually route it along the inner frame and…

Downloads
157
Likes
21
Rating
5
P
Printableslromandine

Tesla/NACS J1772 Adapter Charger Plug Holder for Outside

Holster your J1772 with Tesla/NACS adapter on the wall in a weather safe manner. Print in PETG, ABS, ASA, etc. for UV protection. 30% gyroid infill worked well for me. Mounting holes tested with Tapcon 3/16 concrete anchors.

Downloads
153
Likes
10
Rating
5
P
PrintablesCeptoRider

Tesla J1772 Adaptor Holder

The original design has a flat mounting surface that will allow hook & loop (Velcro), 3M VHB, or drill for screw/rivet, to attach in a convenient location. I elected to mount via velcro to the interior fabric wall in the rear nook of the…

Downloads
150
Likes
24
Rating
0
P
PrintablesDylan

Extruder Motor Rotation Indicator for Snapmaker J1

What you need: - 6x1 mm Neodymium Magnet - Super Glue Just glue the magnet correctly in the hole, let the glue dry for a minute. Attach to the extruder motor axis.

Downloads
149
Likes
22
Rating
5
P
PrintablesKorbenSC

Adapter Makita DPJ180 auf Festool Absaugung

Ein Adapter um die Makita Dübelfräse an einen Festool Absaugerschlauch anzuschließen. Im inneren sind kleine Noppen, so das man den Schlauch auch durch drehen fixieren kann. Der Adapter hatte bei mir noch ganz leichtes Spiel an der Fräse.…

Downloads
141
Likes
16
Rating
0
P
PrintablesBlake Haas

J1772 Wall Holster for Morec EVSE and Others (Universal)

I printed the Wall j1772 Holster by Falcon64 but I found out that the latch on my Morec EVSE didnt quite lock on his, it needed to be wiggled to catch and wasn't reliable for this EVSE. The Morec 32 amp evse I bought came with a wall…

Downloads
139
Likes
20
Rating
5
P
PrintablesModern Crafts

Snapmaker J1 Camera Mount

This camera mount only works when you either remove the lid or raise the lid by at least 15mm. Maybe you could also design a similar mount which sits a bit lower, but I assume the camera might collide with the ribbon cable. I designed a…

Downloads
138
Likes
19
Rating
5
P
Printablesnerdknob

Lectron - Tesla(NACS) to J1772 Charging Adapter Wall Mount

This wall mount is useful if you already have a Tesla Wall Connector or Mobile Connector setup at home and use a Lectron Tesla (NACS) to J1772 charging adapter for your other EV. It allows for convenient storage of the adapter next to…

Downloads
134
Likes
13
Rating
0
P
PrintablesPlaneGuy

Telsa J1772 Seat holder adaptor

Fits Model S, X, 3 and Y seat rails. Slides into the seat track to hold your J1772 adaptor. You need at least 1 inch of room on the seat track with the seat in the driving position. Recommended for taller drivers.

Downloads
133
Likes
25
Rating
3
P
PrintablesKerrywilkinson

Another J1772 dummy inlet

Here is a J1772 dummy inlet to plug your charging plug into when not in use. There are a few others on Thingiverse, so just choose whichever works for you :). Instructions You should probably print with at least 50% infill to handle any…

Downloads
130
Likes
11
Rating
5
P
PrintablesAtle

Snapmaker J1 / J1S PTFE tube guide M6 and M10

Makes it easier to feed filament into the extruder with this attached PTFE tube connector. This will not work with the standard lid on, you need to print an elevation adapter like this…

Downloads
128
Likes
11
Rating
5
P
PrintablesAlec Pfautz

J1772 Charger Holder with Extra Mounting Holes

V3 of Ken's great J1772 Charger Holder model with extra mounting holes

Downloads
128
Likes
13
Rating
5
P
PrintablesLuce

Tesla J1772 charger adapter holder for Model 3 trunk

jonco223's design for a J1772 adapter for the trunk of a model 3. All credit goes to jonco223 on thingiverse. From jonco223: Utilize one of the plastic push pin clips in the trunk to mount this holder for the charging adapter. I printed…

Downloads
126
Likes
19
Rating
0
P
PrintablesZoroSeerus

ZS-J1, 3D Printed Asymmetric Wireless Claw Mouse for G305

You've probably seen the A1 Mini mystery kits for a printed mouse. I think it's pretty neat that Bambu Lab is including those as there are plenty of others to try as well, like this one. It's an asymmetric shape I made that has design…

Downloads
122
Likes
21
Rating
5
P
PrintablesModern Crafts

Snapmaker J1 Recirculating Activated Carbon Air Filter Purifier

This air filter with activated carbon pellets helps to reduce the fumes/smells from printing ABS or ASA by recirculating the air inside the printer. This also helps to create a more even temperature throughout the build chamber. Make sure…

Downloads
122
Likes
42
Rating
0
P
PrintablesAustin Milne

J1772 Style EV Charger Dust Cap

Just a simple cap to protect your J1772 style EV charger plug from getting dirt, dust, and debris in it. Useful for keeping the plug protected when traveling with a Level 1 charger. Snap on the cap, toss the charger in your trunk, and…

Downloads
119
Likes
7
Rating
5
P
PrintablesFabioGhiro

Snapmaker J1 FanDuct

This is an upgrade for the original 4010 extruder fan. It's a little longer and the air channels are narrows to increase the air flow. I'v not make any specifict test yet, if you want to try it and work on in, please feel free to remix it…

Downloads
117
Likes
20
Rating
3
P
Printablesrmeden

Tesla J1772 Adapter Trunk Holder 2020 Model Y

hiopilot@Thingiverse had an interesting idea for a J1772 holder. Previously, I kept mine in the glove box, but liked his/her idea. My 2020 Model Y doesn't have the connections he has pictured. It's sort of a diagonal vent arrangement.…

Downloads
109
Likes
40
Rating
3
P
Printablesdashdash

J1772 CCS1 EV Charger Wall Mount Holder with hex back

This is provides a wall mount holder for a J772 CCS 1 EV Charging cable. I used this video to modify the original https://www.printables.com/model/460807-j1772-ccs1-ev-charger-wall-mount-holder as I had issues with ABS prints on my MK4S…

Downloads
107
Likes
7
Rating
0
P
Printablesdrei-d-w

3DW osVAC Adapter for Makita DPJ180 /PJ7000

This 3DW osVAC Adapter for Makita DPJ180 /PJ7000 replaces the original hose connector. You must transfer the o-ring of the original adapter to this osvac adapter. Lubricate the adapter with a little grease and insert it. In the pictures…

Downloads
106
Likes
11
Rating
0
P
Printablestaco

Bolt EUV - J1772 / CCS1 Charge Handle Cover - v2

Bolt EUV J1772 / CCS1 charge handle cover. Version 2. Used to keep snow, ice, rain off he latches (on handle, in port).

Downloads
106
Likes
5
Rating
5

Monoprice MP10 Replacement Bed Sensor Bracket for LJ12A3-4-Z/BX

For using LJ12A3-4-Z/BX proximity sensor on the Monoprice MP10 (CR10-style) 3D Printer. The bed levelling sensor can be hard to find so if it fails this bracket can be printed that utilises the existing mount and m2.5 screws to adapt to…

Downloads
106
Likes
5
Rating
0
P
PrintablesPortos330D PSN

Support rail din Tuya Smart meter PJ1203A

Il s'agit d'un support pour installer un Tuya smart meter dans un tableau électrique, Aucuns paramètres spécifiques nécessaires.

Downloads
104
Likes
7
Rating
0
P
PrintablesJordverm

Nikon j1 nikkor 10-30 lens repair

My nikon j1 camera was dropped and the connection between lens and camera was broken. After 4 prints I got the tolerances correct and the print fits perfectly. Only there is still some cleaning work to do to remove the supports. Print…

Downloads
104
Likes
7
Rating
5
P
Printablesrlasse

New type of bowden connector for Snapmaker J1/J1s

WARNING : Don't use it without the bowden tube being attached because the connector can rotate and bump into the LED strip when homing. NEWS : I've attached a version 2 (june 2024) that lets you bypass the bowden tube without ever having…

Downloads
101
Likes
15
Rating
5
P
PrintablesERIK3DP

Mounting Cover for Rosahl M-1J1R Electric Dehumidifier Membrane based Filament Drybox

This is a mounting cover/frame for a Rosahl M-1J1R electric dehumidifer membrane which can be used for a filament drybox of around 20-30l for multiple spools. Along with a USB-C power supply module it's a convenient and low power…

Downloads
101
Likes
17
Rating
5
P
Printableslutorm

J1772 EV Charger Holder with higher lip

The original J1772 holder by Ken worked well for me, except that loops of cable hung over the top would frequently fall off as the lip is quite low. When my old one broke I decided to modify it to add a higher lip. While I was working on…

Downloads
101
Likes
9
Rating
0
P
PrintablesAustin Milne

J1772 EV Charger Dummy Socket

A dummy socket for docking your J1772 style EV charger when not in use. Say goodbye 👋 to the plug dangling on the ground and getting dust, dirt, water, and snow in it, “Click” it into this dock and save yourself the headache! Designed to…

Downloads
100
Likes
9
Rating
0

SSJ1 Warrior Breaking Stone Frame – High Relief 3D Wall Sculpture

This high-detail bas-relief wall sculpture features a Super Saiyan 1–inspired warrior dramatically emerging from a cracked stone frame. The design captures intense facial expression, dynamic spiky hair, and muscular anatomy carved in deep…

Downloads
97
Likes
8
Rating
0
P
PrintablesLuce

Tesla J1772 Holder Adapter Remix

I took rodsmith's J1772 to Tesla Adapter Holder from Thingiverse and tweaked it. Updates include (see attached pic): Increase this face for a tighter fit and added radius for assembly. Add radius and thickened the overall width of the arm…

Downloads
95
Likes
14
Rating
3
P
PrintablesKVEL

6j1 Tube Preamp Housing

You can find it here: https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1311.R1.TR1.TRC0.A0.H0.X6j1+tube+preamp.TRS0&_nkw=6j1+tube+preamp&_sacat=0&LH_TitleDesc=0&_osacat=0&_odkw=tube+preamp You can find this popular Chinese…

Downloads
93
Likes
10
Rating
5
P
PrintablesERIK3DP

Outside Mounting Cover for Rosahl M-3J1R Electric Dehumidifier Membrane based Filament Drybox or Bambu Lab AMS

Please see my updated version of the Rosahl M-3J1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…

Downloads
91
Likes
11
Rating
5
P
Printablesタケ

Snapmaker J1 /J1s Display Cover

画面の保護や、誤った操作の防止、子供のいたずら防止などにお使いください。 必要ならカバーの内側に布などを貼ってください。傷防止になります。 TPUで作りましたが、PLAでもいいと思います。 snapmakerのロゴを0.1mm低くしているので、ペイント機能で塗分けできます。 サポートは必要ありません。

Downloads
90
Likes
8
Rating
0
P
PrintablesPhamtom

2022-2023 Tesla Model Y - J1772 Adapter Bottle Holder Insert

Tesla quietly changes parts sometimes. I believe this will fit 2022-2023 Model Y with carpet lined door pockets. It may fit earlier models. It may not fit 2024 Model Y starting in early spring. I printed in PETG for better temperature…

Downloads
88
Likes
20
Rating
0
P
Printablesmoscowpan

Wiper cap Nissan Qashqai / Dualis J10

Wiper cap for Nissan Qashqai J10. NISSAN 28882-AU300 RENAULT 28 88 2AU 300 It's my remix from https://www.thingiverse.com/thing:1572193 with a width scaling of 102%.

Downloads
87
Likes
12
Rating
0
P
Printablesruggibrante

Snapmaker J1 Magnetic Bowden Coupler (6x3mm magnets)

I wanted to use @3DInk_878748 's coupler but did not have the magnets in the size he chose. It allows you to use the standard PC4-01 M10 bowden couplers for 4 mm bowden tubes (to connect it to a dryer) and the original 4.4 mm reverse…

Downloads
86
Likes
14
Rating
5
P
Printablesi3_sven

Snapmaker J1 / Deckelstütze, Klappenscharnier

Hallo, hier habe ich eine Deckelstütze oder Klappenhalter entworfen. Es funktioniert sehr gut. Material PETG oder vergleichbar. Auf den Bildern, habe ich es erst mal mit PLA gedruckt, aber selbst das ist recht stabil. Mit Stütze "Baum“…

Downloads
85
Likes
8
Rating
0
P
Printablesdoragasu

Stackable Gridfinity Holder for "ZoeRax" RJ45/RJ11 Cable Crimper

The crimper can be purchased on Aliexpress: https://aliexpress.com/item/1005006474712295.html The model has a hole for the crimping tool, and another small hole for the spare blades.

Downloads
82
Likes
17
Rating
4
P
PrintablesERIK3DP

New Mounting Cover for Rosahl M-3J1R Dehumidifier Membrane based Filament Drybox or Bambu Lab AMS

This is an updated version of the M-3J1R outside mounting cover . It simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and no…

Downloads
81
Likes
13
Rating
5

OpenSourceEV DCFC + J1772 to NACS Adapter Holder for Rivian R2

OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no…

Downloads
81
Likes
12
Rating
5
P
Printablessolids modeler

J1772 charge holder cable storage

Storage for J1772 EV charge cable.

Downloads
80
Likes
7
Rating
5
P
Printablestaco

Bolt EUV - J1772 / CCS1 Charge Handle Cover - v1

Modeled for the Bolt EUV charge port. Dimensions to check if your charge port is compatible: 83mm tall From the apex/top of the curve, to a bottom edge of the cover 86mm wide Edge to edge 135.088mm radian (overall curve) Purpose: Cover…

Downloads
79
Likes
6
Rating
0
P
Printables10E Shoes

Snapmaker J1 5015 Cooler Mod

Check out my YouTube for more creations: https://www.youtube.com/@EvanTennie I was disappointed by the performance of the stock J1 fan and duct design. I designed this version that keeps roughly the same profile and size as the original…

Downloads
78
Likes
15
Rating
0