93 models
The lid snaps in, just screws for mounting the electronics required.
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
Update: (8/21/2023) - Added new version for x-Max 3 - with spool holder mount at 90deg - note that this will position the desiccant well at the bottom ONLY if the holder is mounted on the right side of the printer. Also reduced the…
Spool holder clamps to handle of the X-Max3. Allows use of Qidi drybox or a regular spool. 2x M3 x 50mm fasteners are required for the clamps. These are the same as the fasteners you likely removed from the printer during the installation…
I designed this spool holder for QIDI printers because the original one, when used with cardboard spools, often created too much friction. This could lead to false filament tangle detections and also generate annoying noise. After…
Based off of the updated back cover with fan. Increased fan size from 20x20x6 to 25x25x7 and added more vent holes. uses M2.5x9 button head or maybe m2.5x8 flathead screw. i made mine from ASA. Will make from a higher temp material when I…
Made this simple riser block for the top lid on my X-max3. Didn't want to take the lid of when printing PLA so this was a simply fix for that. It has two small taps that slots into the holes in the frame. It fits both in the front and in…
I created this model to quickly replace the broken part in feeder and continue printing. it works wery well, but step file is also attached. UPD Jun/20/2025: replaced with v11, more sturdy now
This remix of the Stable Bambu X1C plate holder by Mark (which I use many for my X1Cs) has been remixed to fit the large Qidi 330 x 330 plates comfortably. Very stable with one or more plates installed.
The stock motherboard cooling fan for the Qidi Xmax3 is quite loud and always on. The motherboard does not have any extra programmable fan headers, so I designed this replacement back cover to install a silent 120mm fan in place of the…
The Qidi X-Max3 is prob the best consumer printer right now with some minor flaws. Most of them are easily fixed with some modding. One of it is the back-mounted-filament-box/hanger. This is unpractical. Whatever you use instead, like a…
Clip de rechange pour extrudeur de X Plus 3 lors d'une casse du pion de fixation
Printed in ABS Like Resin but will also work on a normal FDM Printer. Support is needed. I would use 3lines and like 20% infill. Also use a Material for high temps cause its in a closed case.
The internal camera of the XPLUS3 is affected by the internal LED lights, causing severe flare. If a self-made lens hood is attached here, it will hit the print head at maximum approach and cause damage accidents (This actually happened…
I'm in the process of modifying an printer where i want to use a Voron dragon burner tool head. I had to make some modifications so i needed a 3D model of the hotend for my Xmax3 so i drew it up in Inventor so i could make an assembly.…
Stick, screw or glue on top of Quidi X max 3 to hold lid open when printing PLA or PETG, but still have dust and cat protection.
Use Tape, glue or screws to mount to the side of the door, needs 1x 8x3mm magnet, make sure to insert the magnet the right way matching the door magnet, (magnet attaches to existing door magnet) https://a.co/d/fQN8eWw remix of this…
Recommend printing in orientation provided as laying down the axial torque is likely to separate layer lines.
This is a din rail mount for MAX31865 breakout boards. You will need the Voron din rail clip as well, it can be found here: https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Electronics_Bay/pcb_din_clip_x3.stl Print both files and…
As I have been told, that I run my Run out sensor in reverse, I designed a new bracket to use the BigTreeTech Smart Runout Sensor V2 instead. I tried to connect the sensor to may printer by following Ben's Tutorial…
I stopped using this mount and moved the probe into the back print head cover: https://www.printables.com/model/1317184-qidi-x-max-3-magnetic-printhead-backcover-for-btt The Bigtreetech Eddy probe upgrades the original inductive or…
Qidi X-MAX3の為の部品です。 ケーブルキャリアが右奥に移動した際に、フレームリブに干渉してしまう恐れを回避する部品です。 右側のステッピングモーター取付フレーム、上部にある四角の穴に差し込み使用します。
Print face down .2 with bed only supports
This is a simple enclosure to prevent stuff falling in the front case of the printer. There is a big gab and i had to get mutliple small parts and junk out of it. Now its closed so no problem anymore. The caps you can secure with a trop…
This mod requires soldering and putting holes in your walls and modifying your dry box, but will allow you to relocate the filament run out sensor to the top of the printer and mount the dry box to the wall.
it was print with printer model Qidi X-MAX3 and it sit made for fan 92x92x25mm Noctua NF-B9 redux-1600, it is necessary to reduce the voltage from 24V to 12V, therefore there is a box for a DC/DC converter (MP1584 DC-DC Step Down Power…
I made this design for a project in which i needed to join an ESP32 and a MAX31865 in an electrical box. Simply slip into the holders the ESP32 and screw the MAX31865 on top with two little screws
A simple lens hood I made for the ofiicial camera for my X-max 3 to block the glare from the LED lighting. QIDI links to an existing one on here, but I did not care for that one as it is visible in the cameras field of view.
This is my Y axis conversion for the Simax3D Iron M1 printer; I did this to compliment my X axis Linear rail conversion. You will need the following parts: 2 x MGN12H 300mm Linear Rails 10 x 2020 M3 drop in nuts or T nuts. 10 x M3x10 ~ 12…
I had heard that the Xmax3 are the same size as the Plus4 and are swappable (with some changes to the plug) (reports are the q1pro hotends are the same length as the plus4) Later on I heard that it is 4mm short. So I Stewy helped me with…
Hier eine einfache Halterung für die Seite am Qidi X-Max3 über die Griffmulden. Es werden noch 2 Schrauben M6 benötigt sowie eine Schraube M5. Die M14 Schraube im Bereich des Gewindes und kurz davor auf 100%Infill drucken. Durch das…
Only a remix of the original extruder cage to allow the usage of a 4mm bearing with a Omron D2F-L switch. I didn't have 5mm ball bearing and was missing the predrill for the switch. Additionnaly, if you have an inductive Probe on your…
This is a mount for a Raspi camera (original version) will seat a 1"x1" board. Put a channel top and bottom for routing the cable away from the belts depending on the install orientation.
A friction fit case for the following cheap web cam: https://www.aliexpress.com/item/1005008262694281.html I'm cheap so didn't want to pay over the odds for such a simple thing. £6.50 is McDonalds money…so join me in my budget friendly…
A quick design of a nozzle wiper/brush mount I through together. It works well enough but I am I think it could be improved. I was really just taking a guess as to what would work. There is limited space where the nozzle can reach around…
Just an addition to the available side mount tool holders to hold the wrench and hex keys.
Heat set inserts are now installed from behind the plate. Additionally there's “_short_offset” file, I noticed that the rear holes were not aligning with my micron carriage, so I moved the holes 1.5mm up to better align.
Guten Tag! Hier mal eine Spulenhalterung für den Qidi-Tech X max3. Da die Originalhalterung für mich völlig unbrauchbar ist, habe ich mich mal hingesetzt und in Blender was gemalt. Ansonsten ist der Qidi ein Top Drucker, muss aber bei mir…
One of the biggest annoyances with the X-Max3 is the lid being in the way every time I have to reach in the top
Larger duct for qidi carbon filter
This part is a spacer located at the back of the toolhead, between extruder mount and PCB. It broke when I replaced the PCB with the new one, so I had to design this replacement. Printing it in ASA, ABS, or PC is recommended.
This is the result of observing the movement of the tube and making improvements.
Needed a simple snap together case for a thermocouple breakout board for my kiln. Printed in ABS.
Made for the 42mm square ELP USB camera https://a.co/d/1gdbB17 20 degree down angle 25mm riser
The original clips broke the first time I removed them. I designed these to replace them. It is recommended to print them in PETG or ASA
This is a mount for an Adafruit MAX31865 board, which is used to drive PT1000 and PT100 sensors with a MAX31865 over SPI. This DIN mount is styled like other DIN mounts for the Ender 3 NG v.2. Works with upstream Klipper. Here's a link to…
Mounts a 41.5mm square bracket that snaps onto the door trim. No hardware needed. Camera used: https://a.co/d/7WPFmIH
Holder for Nevermore V6 filtration system. I use 3xM3 screws that I found around to screw it to the holder. There are two additional teeth from the bottom that supports filter carriage. Attention! Holes does not fit perfectly as it…
Printed @ .2 Bed supports only on. I used Ender PLA at 100% infill, Suggest longer screws as stock are too short as it is. Both files can be printed at once if desired.
This is the culmination of projects while I've been printing parts to build a Voron. I decided it was time to convert the X axis to a linear rail. I combined this with my shroud design which will hold any E3D V6 compatible hotend. The X…
Why bending yourself to observe the first layer lines?? Now you can just set, print and observe it in the comfort of your chair/bed… Preparation To get the nozzle cam working on your xmax3, if you already have a camera, you'd need to…
Qidi X-Max3 Filament spool holder and BTT Smart Filament Sensor V2 mount I have made this filament spool holder for the Qidi X-Max3 It mounts to the original runout sensor mounting with 4 screws or you can used 2 x 6mm bolts by inserting…
The original Qidi inductive probe failed on my printer and i had a Super pinda laying around from another project. Dimensions have been taken from the original Qidi mount, so no need to edit the printer.cfg as the X/Y offset is the same.…
По сути это перерисованный кронштейн с моими изменениями. Оригинальную модель не удалось экспортировать в твердое тело и я просто оцифровал эту модель и изменил ее исправив некоторые моменты. Схема подключения выглядит следующим образом:…
120mm Fan reducer to 100mm vent tube for Qidi X-Max3 , 120 mm Fan replaced 80mm fan ‘bit of cutting and sanding required’ I then attached 100mm Alloy tubing and vent to wall outlet I had made.Also included is 120mm fan template to mark…
I designed this E3D mount for the Simax3D IronM1. The stock hotend works fine, but it's not all metal, and it's really loud. My initial design, was simpler, and worked well; until I started printing ABS. The air flow from the heatsink…
NOTE: BEFORE YOU ARE GOING DOWN THIS ROAD, MAKE SURE YOU KNOW WHAT YOU ARE DOING BEFORE SWAPPING STOCK BOARD. WARRANTY WILL BE VOIDED This is the mount for the Manta M8P or M5P to be used on the X Max3. BOM: 4x M3 dia4.5mm Heated inserts…
After upgrading the printer to the unpatched upstream Klipper firmware, the Qidi touchscreen no longer works. (Compare https://github.com/leadustin/QIDI-up2date-english/blob/main/Klipper-Update/update+upgrade.md) I used this adapter plate…
Gives drone like shots without the drone for those that want footage of their vehicle racing 4WD driving etc. The original mount using 8mm carbon square had some vibration when coming out of corners so changed design to suit 12mm carbon…
Height adjustable camera mount for Rapberry PiCam and non-adjustable height lightburn camera mount. .3MF file included so you can adjust or modify.
The Powkiddy RGB10Max3 Pro is a retro handheld emulation game console that runs on Linux. It's design and shape allows for a case that be used on the front or back of the device, allowing the case to be used as a grip case or a protective…
Rod mounts in standard location on the rear of an XMAX3 to allow for use of a 3kg spool, without the drybox. Category: 3D Printer Accessories
It appears that Voron has been using a different PCB DIN plate for quite some time, so other MAX31865 plate to PCB DIN adaptors don't work (they expect the self-tapping screws to be farther apart. This kit only requires: 2 self tapping…
I used ASA. Supports are needed. separate the heater from the fan. use those 4 screw to attach heater box parts list Qidi chamber heater(heater and fan) 2x HEPA filter(80mmx40mmx15mm) 6x m4 threaded heatsert 6x m4 x25mm flat head cap…
Simple holder for 3d printer nozzles. Can store up to 9 in it. Printing Recommendations: Filament: PLA or PETG Supports: none Infill: 15% If you like my work and want to support me, you can buy me a coffee here:…
Simple spool size reducer to fit in GTMax3D spools in place where a tighter hole is needed (for example Bambu A1 AMS). Will with a tight fit adapt a standard GTMax3D spool from 72mm to 55mm. Printer Settings: 0.4mm Nozzle 0.28mm Layer…
Require: PC4-M10 PTFE Tube Connector
印刷中に問題が発生し、ホットエンド周辺に大量の材料（PLA）がありました。解決策として、ホットエンドを300℃まで加熱して溶かしました。オリジナルのダクトは破壊して解決しました。基本的に外側から外せると、良い結果になると思います。最後のモデルはPAHT-CF等、高温溶解時にホットエンドを冷やさないように出口を、これまでのモデルより外側に向けました。エラー停止し難いダクトだと思います。
I wanted to mount a Nevermore V6 in my Xmax3. So i designed this blanking plate that does double duties. Both blanking off the exhaust fan hole and has mounts for this Nevermore V6 holder.…
Qidi has such a long filament path and the drag affects print quality sometimes. Thatswhy I decided to use a filament buffer device. I print ABS but you're good to go with PLA or other shit you have laying around. Very simple CAD model…
Alignment PEI for QIDI X-MAX3
This is a work in progress. It is a part to provide some extra strength to this fairly fragile design, in addition to making the belts serviceable. It retains the socket head cap screw as the Y end stop. I designed this after my Y axis…
Google 翻訳で開く • A poorly placed runout sensor resulted in the waste of expensive materials and valuable time. Just as I was searching for a solution, a clue popped up: Using the D2F-L2-D runout sensor provided a reliable signal. However,…
マザーボード冷却ファンの起動条件に疑問を持ち、目的を達成する為に2個のファンを必要としました。ファンにはエアーフィルターが必須だと判断しました。 2個のファンを調整するためには、プリンターコンフィグレーションの変更を加える必要が有ります。
This plug fits into the X-Max 3 Z-rod mounting holes to keep debris out. I made a top plug and spring combiner to get the proper height with what I had. The springs are 33/64" x 9/16" 22gauge stainless. It's just enough to push the plugs…
When you're tired of dry box mounted at back. Usable for both sides, but on right side fan could complicate drilling and mounting. Maybe you needn't take off side fan, I moved bolts higher then on photos. But drill holes for them…
A remix adding a TPU seal and screw mounting using the existing hardware.
Introduction: Concerned about the Vocs produced by printer, I believe a fume-hood like air filter would be helpful to remove most of the odeur gaz from the inside of the printer before they diffuse into the surrounding. This design has…
added RH side holder and rotated LH side so the bowden tube has a better shorter path
This model allows you to mount the QidiTech filament box directly on a Wall behind or next to your printer. This makes changing the filament more convenient because you don't have to reach behind your printer to unlock the filament box.…
Qiditech X Plus3 and X Max3 toolhead back cover expanded to accommodate BigTreeTech EBB42 Gen2 V1.0 along with 25mm fan
made the fan bigger to hold a Noctua NF-F12 iPPC-24V-2000 SP IP67 PWM, Heavy Duty Cooling Fan, 4-Pin, 2000 RPM, 24V Version, paired with a 4pin to 2 pin connector Fan https://www.amazon.com/dp/B0BKGHDV15?ref=ppx_yo2ov_dt_b_fed_asin_title…
I had 30mm winsinn fans on hand so I remixed the cover to use them
As mentioned this just supports mounting the noctua a12x25 120mm fan. I mounted mine on the outside from the inside using the supplied screws. I could have modeled a small hole in for the cable routing but am using a slot instead. It…
Helps with mitigation of having dragchain getting fully stuck, ruining print and perhaps drag chain itself , simple clip on onto metal frame of printer, Print in z direction , recomend material that is ASA or stronger.
This is as close to the real stock headband as I could model in Fusion 360. The padded part clips onto it just like on the stock headband, and the adjustable earcup mounts also work fine. You just transfer all the hardware and the tape…
残り少なくなったフィラメント、PAHT-CFなどを上手く処理する手段として作成しました。 バックカバーの上に直径8ミリの磁石と、M3の長さ30ｍｍを4本使用します。 ネジ穴はタップ加工します。 フィラメントが無くなった場合に移動するエスケープゾーンでの干渉は有りませんが、後ろ側の両サイドのモーターには干渉します。 尚、作成及び使用に関して一切の責任が取れません。トラブルが起こってもご自身で楽しんで解決して下さい。
120mm Fan reducer to 100mm vent tube for Qidi X-Max3 , 120 mm Fan replaced 80mm fan ‘bit of cutting and sanding required’ I then attached 100mm Alloy tubing and vent to wall outlet I had made.Also included is 120mm fan template to mark…
Qidi X-MAX3の為の部品です。 ケーブルキャリアが右奥に移動した際に、フレームリブに干渉してしまう恐れを回避する部品です。 右側のステッピングモーター取付フレーム、上部にある四角の穴に差し込み使用します。
When you're tired of dry box mounted at back. Usable for both sides, but on right side fan could complicate drilling and mounting. Maybe you needn't take off side fan, I moved bolts higher then on photos. But drill holes for them…
This is the result of observing the movement of the tube and making improvements.
I wanted to mount a Nevermore V6 in my Xmax3. So i designed this blanking plate that does double duties. Both blanking off the exhaust fan hole and has mounts for this Nevermore V6 holder.…
