7,980 models
The model of the tension meter helps you control the tension on the belt of your Prusa printer. It's specially designed to check the tension of your Prusa printer's belts. It works with Original Prusa i3 MK3/S/S+ with the belt GT2. How to…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
Simple yet strong hook, perfect for hanging clothes, towels, bags, and more. The beveled edges are optimized for a great first-print result and to ensure they won’t damage fabrics. If you’d like to support my work, leaving a ♡ like ♥ or…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
FAST PRINT - Single Wall Basket Weave - NO SUPPORTS The Problem: All baskets and lids with grid-like perforations result in long print times If you've printed such a basket you'll notice that the printer spends the majority of its time…
Print approx. €4.26–€5.21 excl. taxPreliminary estimate for one variant
This is a remix of the popular Multimeter (DMM) Probe Tweezer made by QED_Maestro. Description This model provides a convenient way to hold both of your DMM probes with one hand. The upgraded secure holders prevent the probes from falling…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
What it is A compact tool to determine angles. It also includes a 120 mm linear scale and ring gauges from 1 to 9 mm in 1mm increments (clearance designed is 0.1 mm). What to print There are three parts awaiting you, which can be printed…
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for PETGSource material: PET
What it is A compact gauge to determine inner and outer radii/diameter, ranging from 1 to 20 mm. It also works well as a coaster. What to print There are multiple variants awaiting you: central gauge version 1 measures from 1 to 10 mm in…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for PETGSource material: PET
A little stand for the standard LCD Hygrometer or Thermometer you can find in many onlineshops. Easy to print with the face on the printbed. Click here for a smaller version of this stand! If you like check out my other designs too!
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant
BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
The InFiDEL is a cheap (< $5) filament diameter sensor that can be calibrated to provide surprisingly precise filament diameter readings in real-time. While firmware support is currently sparse, the idea is to use the sensor to correct…
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant
Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…
Print approx. €2.59–€3.17 excl. taxPreliminary estimate for PETGSource material: PET
This is a fast printing, fully parameterized cardboard style box. Why I did this I made this because I hated to print forever when I needed a little box, like a gift box or a container for srews or whatnot. This model is only 2 layers…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
This ring is a full remake of the Crochet Ring originally uploaded by @Milan . After using the original for a short while, my wife asked for a few changes. Specifically, she requested (1) a taller guide rail at the base of the ring and…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
A simple caliper design to measure objects up to 15 centimeters :) happy printing
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
This is a fully parameterized mount for power strips, but it will fit any other rectangular thing you want to mount on a flat surface (like my Dell PSU). I found some designs here, but none fitted the strips I had at home. The .3mf file…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
A filament indicator for Prusament classic spools (non NFC) . Update 2026-01-27: Added v2 with small corrections on weights, added TPU To be placed over the 4 consecutive fully open hexagons (see picture). It snaps in the hexagons around…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
I created this simple and (almost) fully printed anemometer for students in local high-school programming classes. 3D printed parts (PETG): Top dome Top core (this is where a small magnet is placed) Bottom body (this part contains a Hall…
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
It's hard to find project boxes with just the exact dimensions you need and even harder to cut square holes in the them. This OpenSCAD generated model is parameterized in width, depth, height and wall thickness. Set the dimensions you…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
The Centring Square is an essential tool for precision work. It helps you easily find the center of round diameters – perfect for drilling, marking, or alignment tasks. Why choose this tool? ✔ Always useful in the workshop and for 3D…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
A minimalistic stand for the standard LCD Hygrometer or Thermometer you can find in many onlineshops. The bottom is labeled, pay attention to this when inserting the hygrometer. A larger version of this stand:…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Držák teploměru do tiskárny Prusa CoreOne pro přímou kontrolu teploty i vlhkosti v komoře. Teploměr je čitelný i přes dveře. Do vytištěného dílu vložit dva magnety a teploměr. Nebo místo magnetu použít nylonový nýtek , který zbyl od…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Thanks Extrutim for the original design! I searched a nice place for the original stand and saw my skadis board... So I added two hooks and ventilation holes. As simple as that.
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
This mount is designed to attach an ESP32-CAM microcontroller to a water meter. Together with the open source firmware "AI-on-the-edge" ( https://github.com/jomjol/AI-on-the-edge-device ) of the user Jomjol it can read the water meter…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
A simple print to allow you to insert a small round hygrometer into the lid of a Chef's Path brand cereal container for use as a filament drybox. The insert fits inside the top lid seal (since you won't be pouring anything out from this…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Thermometer holder for Prusa CoreOne / + / L printer for direct control of temperature and humidity in the chamber. The thermometer is readable even through the door. Insert the thermometer into the printed part. Use the nylon rivet left…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
Držák teploměru do tiskárny Prusa CoreOne pro přímou kontrolu teploty i vlhkosti v komoře. Teploměr je čitelný i přes dveře. Do vytištěného dílu vložit dva magnety a teploměr. Tisk: materiál PETG, vrstva 0,2mm, perimetr 2, výplň Gyroid 15…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
This is a drawer organizer for Nespresso Vertuo pods inspired by the $20 ones you can find on Amazon. However, unlike those, you can customize this to exactly fit your drawer: just update the code with your drawer dimensions and generate…
Print approx. €8.25–€10.08 excl. taxPreliminary estimate for one variant
If you want to achieve something you have to do it regularly. Be it working out, getting enough sleep, playing an instrument, or designing a model for a weekly contest. Sometimes it's complicated to keep the pace, and sometimes you just…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Update 23/05/26: added mirrored version to fix battery hole issue Update 11/12/24: added cutout for battery cover to make replacing the battery easier, model now has built in supports that should be removed before assembly Print Settings:…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
This mount is for a round hygrometer thermometer from EEEKit which is very easily available on Amazon. The assembly is very easy with 4 pieces of 8x3mm magnets. Two are clipped inside the mount and two are attached to the plexiglass…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
Possible to print in 2 colors with MMU to print logo Diameter : 40 cm
Print approx. €10.02–€12.24 excl. taxPreliminary estimate for one variant
All credit for this system of cover to toggle switches goes to the original uploader firstgizmo . Big thanks to you, for your model and your share of the step files. I only made changes to accommodate smaller toggle switches like these:…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for PETGSource material: PET
Get your benchtop multimeter away from the bench. Clears some space. Print, snaps in original foots, 4 x M3 screws needed. If you have this thing, you will know what to do.
Print approx. €2.32–€2.84 excl. taxPreliminary estimate for PETGSource material: PET
Some time ago I built a radio with a microcontroller and an FM-IC. I used an ordinary single-turn potentiometer to tune the frequency, but this did not work as intended. It was really difficult to tune in a specific frequency since the…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Designed a shop vac nozzle for my brother that has a slot shaped entrance. Fully parameterized for all the critical dimensions. I printed in PLA with 6 perimeters and an internal brim.
Print approx. €3.04–€3.72 excl. taxPreliminary estimate for one variant
Für den Xiaomi Mijia Bluetooth Thermomether/Hygrometer habe ich eine Wandhalterung konstruiert. Da dem Gerät nur ein doppelseitiges Klebepad beiliegt und keine weiteren Befestigungsmöglichkeiten vorgesehen sind, könnte es bei einem…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
A simple free-standing case to hold a cheap rectangular combination hygrometer/thermometer module. Available in a 30° and a 45° front angle version. The rear wall is perforated to allow the ambient air to reach the sensors inside the…
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for one variant
I live in a very humid climate in Florida and need to make sure my expensive (but best quality) filament from Prusa is all dry and dehumidified. I have designed/remixed a solution to use rechargeable silica gel with a digital…
Print approx. €3.86–€4.71 excl. taxPreliminary estimate for PETGSource material: PET
This is a standard embroidery hoop that uses M3 fittings for the tightening mechanism. The default size has an inner hoop diameter of 80mm and a mesh file is included for that size. Please note that this model should be sliced with pauses…
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for PETGSource material: PET
2 variants: for tubes with 14mm outer diameter for tubes with ½ inch (12.7mm) outer diameter Print it in PETG for more flexibility. Optimised for printing without supports to save time and material.
Print approx. €2.13–€2.60 excl. taxPreliminary estimate for PETGSource material: PET
Hygrometer - https://amzn.eu/d/1nIj0yG Most of the Amazon ones are the same, as long as the dimensions are 48mm x 28.6mm Magnet - https://amzn.eu/d/4x4VSJl 3 x Magnet Size: Dia. 6mm x Height 3mm Hygrometer to be close to my plexiglass…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
Print settings: zero top layers zero bottom layers zero infill 3 perimeters 0.4 nozzle 0.2 layer height no supports I used PLA.
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
I made these 3D models to facilitate the attachment of the ADXL345 USB accelerometer to both the head and bed of the Anycubic Kobra 2 Neo. These models serve as effective solutions for integrating the accelerometer, in order to measure…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
A filament indicator for Prusament NFC spools . Update 2026-01-27: Removed 'feet' versions, added TPU. Update 2026-01-14: Uploaded V2. On V1 the second and third number of grams were swapped. It fits on 2 places on each sides of the…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
STAND for Digital Mulimeter DT830B (D), DT832, DT838 and many other clones. The stand consists of two parts. After assembly, the stand must be glued to the back of the multimeter. Easy and fast print!
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
Created a stand for these commonly available round hygrometers. Found some models online which I liked, but had design flaws, sadly wasn't able to mod them due to bad modeling techniques in the base model - So I created my own. .f3d and…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET
Printinformation: Use Support for the hooks. ("Support on build plate only") Thanks to https://www.printables.com/@Historicc_559983 for providing the Parametric IKEA Skadis Hooks i used in this Model.…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
Adaptable tray for telescope, for 1.75 and 2 inch tripods, with different inclinations and optional holders for tablets. (See also: https://www.printables.com/model/1040019-frame-for-models-of-telescope-trays ) After making several models…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for PETGSource material: PET
Design: I started from the https://www.printables.com/model/190380-print-in-place-boxes designed by Vidar I sized the box using Fusion 360 parameters from the original model and design an insert for the drills bits. With thickness set to…
Print approx. €3.95–€4.83 excl. taxPreliminary estimate for one variant
Features Combines the Adjustable Thermometer Bracket and the Filament Guide Enables to use a second spool holder on the left side Uses the same hardware as for the filament guide What you need Printed parts thermometer_bracket_A (1x)…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
If you are in need of a hinge with holes of a diameter of 3 mm you are in luck! length: 41 mm, width: 2 x 13 mm, 3 holes: 3 mm One end is open which I have melted wider as soon as it is assembled with a soldering iron but you can use an…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
This is a remixed project of the Mitutoyo Micrometer Battery Cover by GreatOldOne . After printing the original design by GreatOldOne, to replace a broken Battery Cover for our 1-2” Mitutoyo Mic. I noticed that the fit was not as I…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Precision Multimeter Tweezer for SMD and small components Introduction Traditional multimeter probes can sometimes be inconvenient when measuring small components or testing printed circuit boards. To address this, I designed a pair of…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
I just needed a replacement key for my outdoor utility cupboard for my electricity meter now I am having to do weekly meter reading got tired of using my fingers to unluck the door. If you print, please share a make, and let me know that…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for one variant
Skimmer / Filter out - Aquarium - 10.5mm diameter Print instructions Print vertically with all supports
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
Knob for rotary encoder or potentiometer with 6mm shaft.
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
This is a housing suitable for the component testers known as M-Tester or LCR-T4. The area for identifying SMD components is not accessible. 4 M2.3 and 4 M2 self-tapping screws are required for assembly. For my application it works really…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Keep your washi tape organized at your desk and on the go! FEATURES designed for washi tape rolls with 25mm diameter fits 4 rolls of 16mm width washi tape screw-on lid for compartment to keep small accessories -- great for additional…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
There are lots of dust catchers out there for drilling into drywall walls. But I had to drill holes in my plaster ceiling. A lot of them. So I built this. It worked great for its main purpose. I have since parameterized it so it should…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
The Senosor became too hot on the first model despite the honeycomb on the lid. For this reason, I also had to design the outer wall with honeycomb. Now there is no heat problem in the housing and the sensor measures the content of CO2 in…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
With this small model of a anemometer you can observe the wind speed or count the revolutions of the cups in a minute. It is also a nice model for experiments or explanations or you can check if it is windy outside, The axis, connector…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
5, 10 and 20cm segments that can be strung together without limit. If you're into limits, there's a foot and topper too.
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Just a simple box to encase a potentiometer in and run a 5mm cable through. The lid is held in place by 4x M3x10mm screws ¹. The design is tailored for a layer height of 0.15mm. The holes for the screws are designed to be printed upside…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
No hardware besides the 608 bearings and PC4-10 fittings. No drilling required. This is the same as the original, except adding a stand for a hygrometer and a different design for the desiccant cover that prints much faster (7 min vs 18…
Print approx. €5.22–€6.38 excl. taxPreliminary estimate for one variant
Tachogehäuse für Simsonmopeds mit 60mm Durchmesser Tacho Speedometer housing for Simson with 60mm diameter
Print approx. €3.55–€4.34 excl. taxPreliminary estimate for one variant
As an experiment in transparent printing, I embossed hexagons into the lid to make it half as thick except for the ribs between the hexagons, and printed in 3D Printing Canada PC+ Transparent filament using a max of 20 mm/s for the bottom…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
Did this ever happen to you? Worry no more! It might not be the most aesthetic solution but it's simple and it works. The files are just examples for my probe (8/37mm)
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
This is a design that prints without supports… I printed this in PLA and yes I know that tires are supposed to be made of rubber ( in 3D print TPU is the usual substitute) but as my car is going to field test in the garden with grass and…
Print approx. €5.96–€7.29 excl. taxPreliminary estimate for one variant
Hey there I designed this shopping cart token for the Last Meters Contest. I believe that this is great for using up the rest of the filament and you can't have enough of these token. I have one on my car key and one on the house key. You…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
This is a fan cover for a 120 mm fan with holes of a diameter on 3 mm
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
After drilling a unnecessary 10mm hole in my filament box, I decided to use it as a mounting point for a hygrometer. So here is the bracket. Printed with 0,15mm in PETG Original Onshape Project right here:…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
Compatible with this Govee thermometer or any other device that fits in the basket hole:66x21.5mm
Print approx. €1.69–€2.07 excl. taxPreliminary estimate for one variant
Turn a simple Ace Hardware meter/yardstick into a large set of calipers. I used a measuring stick from Ace, but any other similarly sized stick should work. The fit is pretty tight at first, but with a little use or additional…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for PETGSource material: PET
For English scroll down. Wer kennt das nicht? Das Anzeichnen von Löchern mit einer Wasserwaage ist nicht unmöglich, aber oft etwas umständlich. Aber mit diesem Modell wird es zum Kinderspiel. Die beiden Teile werden auf der Wasserwaage…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Remix of yaras' excellent drawer organiser to add a parameterised Fusion file for the main piece of the organiser since I wanted to use it in a different dimension drawer than the original, and a fix for the 4-leg connector to size it…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Candle holder which consists of two parts which can easily put together, so there is no need for support structures. The nail can be filled with a Ø 2mm x 50mm rod, so it gets stable. Category: Decor
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
This is a replacement stand for my Fluke 187/189 multimeters. They used to be sold on ebay, but no longer, so I created my own. I recommend PETG, as it will be flexible and robust for normal wear and tear. I used Overture PETG 1.75…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
Inspired by the cap of my 3D Connexion Space mouse, i decided to design a knob with the intention to mount it to a PWM dimmer. It should fit any potentiometer with a 6mm toothed shaft and be a pressfit. The knob is approx. 45mm in…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
The problem The magnet of the electric bike of my father-in-law used to rotate on the spoke it was attached to by the default single-screw mechanism (see picture below) causing the speed controler of the motor to malfunction (for anyone…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for PETGSource material: PET
This hood is designed as a solvent trap for samples being tested on Anton Paar rheometers that have volatile solvents. The design has been tested successfully and provides sample stability for at least 24 h. Note: Please remember to seal…
Print approx. €4.04–€4.94 excl. taxPreliminary estimate for PETGSource material: PET
This is the core of a variometer (also called a vario coupler) used in radios from crystal type to the early vacuum tube radios. I strongly recommend using a filament with no pigment, as many pigments interfere with RF signals. Print…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
Introducing the Tsunami SUP Paddle Clip Set, designed to securely hold paddle pieces together for enhanced stability during your paddleboarding adventures. Optimized for Tsunami SUP paddles, this set features a parameterized design for…
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for PETGSource material: PET
A parameterised drill bit stand that can be mounted on a tool board. Features include with mounting holes to screw it to a tool board. with a label to print and stick on the front. that can be changed to hold your set of bits. that can be…
Print approx. €4.82–€5.89 excl. taxPreliminary estimate for one variant
Holder for a multimeter on a multiboard using the multiconnect connectors Used a 0.4 nozzle on 0.2 layers with 15% infill
Print approx. €6.52–€7.97 excl. taxPreliminary estimate for one variant
A 3x1 Gridfinity container for the Bosch GLM40 laser distance measuring device.
Print approx. €3.64–€4.45 excl. taxPreliminary estimate for one variant
Hairpin Line Isolation Mount for Hy-Gain Discoverer 7-1 (40m Dipole Antenna) Replacement hairpin line isolation mount specially designed for the Hy-Gain Discoverer 7-1 (40-Meter 1-Element Dipole Antenna — Order No. 371S). Original…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET
Print instructions print settings: 0.20mm QUALITY filament: PETG 15-20% grid infill What is needed: 2.5mm Allen key 5x M3n nut 2x M3x12 screw 3x M3x8 screw 1x zip tie PTFE-Tube 4x650mm Filament Guide A THERMOMETER BRACKET FS Guide…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET
Our robot vacuum cleaner is 5mm too high to fit under a sideboard with its turret. That's why I gave it little feet. Now - as you can see - dust doesn't stand a chance under the sideboard either :) The Fusion360 model uses params to be…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
Printed in PETG with 0.2mm layer height and a 0.4mm nozzle
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
Sanding Disc Organizer (50 mm) With this organizer, Velcro sanding discs (diameter 50 mm) can be stored neatly. It consists of individual modules that can be linked together. The modules can be rotated. This allows for space-saving…
Print approx. €0.68–€0.84 excl. taxPreliminary estimate for one variant
An enclosure for my Home Assistant Glow utility meter sensor. Other designs I've seen had the microcontroller and sensor as separate items, I didn't see the need and wanted a single enclosure. I had ESP32 Mini on hand as otherwise, I…
Print approx. €1.31–€1.61 excl. taxPreliminary estimate for one variant
Two sliders can be attached to any length 5/8" to ¾" thick wood beam to allow drawing or cutting a circle. If you prefer not to use a wood scrap, you can print the beam consisting of multiple beam extensions that press fit together. The…
Print approx. €3.66–€4.47 excl. taxPreliminary estimate for one variant
Hooks for 2mm diameter wire mesh. The pen has a diameter of 4mm, and the end ball has a diameter of 6mm. No Supports needed. Happy printing.
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
A Gridfinity box (size 2x3x4) for storing the original Prusa Accelerometer , designed for the Prusa CORE ONE 3D printers. The case is printed in two parts, the Gridfinity box and a cable holder snap-on to keep the accelerometer cable in…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
In order to know the accuracy of my own thermometer/hygrometer, I built the holder 3Ds directly😊 The Sensirion SHT4x holder refers from https://github.com/Sensirion/smartgadget-sht4x-housing/tree/main/Housing . And the diameters of the…
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a way to see humidity for my spools that I store in the PrintDry VS206 airtight containers (https://www.printdry.com/product/vacuum-sealed-filament-container). This print is shaped to match the side wall contour and to notch on…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for PETGSource material: PET
Do you have a Kamstrut flowIQ 2200 and want to make it smart? Then this model is a good option! Simple, easy do assemble and mount on top of your existing system without a hustle! Used hardware for mounting: 4pc M3 hex screw 4pc Hex M3x8…
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for one variant
The two pieces must be printed twice. The pieces can then be assembled with a rod passing through the middle. The rod can then be lashed to the tree to hold up the topper. I printed this at full scale with natural PLA. The crown shape…
Print approx. €4.61–€5.64 excl. taxPreliminary estimate for one variant
This is a pocket sized tool for measuring small diameters (2-10 mm). It also has 0.5 cm and 1.0 cm gradations on one side to use as a ruler. Design features The current version has 5 diameter openings from 2 mm to 10 mm, and a 5 cm ruler.…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
Look at the picture. Very simple print.
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
After getting cheap round hygrometers and printing a bunch of hygrometer lids I found that they would not fit because they are tad too large to go through the lid opening in the original lid and have very hard latches which do not…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
